https://bugzilla.novell.com/show_bug.cgi?id=855537 https://bugzilla.novell.com/show_bug.cgi?id=855537#c0 Summary: USB2.0 port doesn't work in openSUSE Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: 64bit OS/Version: openSUSE 13.1 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: lym418@Hotmail.com QAContact: qa-bugs@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:25.0) Gecko/20100101 Firefox/25.0 The situation is that my computer has two USB ports.One is USB 2.0 and one is USB3.0 When I run openSUSE,the USB3.0 works properly,but USB2.0doesn't work(it looks that it cannot detect any devices inserted). But in windows both ports work properly. PS.No usb devices can be detected but the phone can be charged though USB2.0 port. Reproducible: Always Steps to Reproduce: 1.disconnected my mouse from USB3.0 port 2.Connect my mouse into USB2.0 port 3.disconnect mouse from USB2.0 and connect it to USB3.0 Actual Results: After step 1: mouse disconnected After step 2: Mouse doesn't have any change(not detected,the light of mouse doesn't flash) After step 3: mouse work properly Expected Results: No matter which port is used the mouse should be working properly. I use command lsusb the result is shown as following: lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 002: ID 1532:0037 Razer USA, Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f3:0018 Elan Microelectronics Corp. Bus 001 Device 004: ID 8087:07da Intel Corp. Bus 001 Device 005: ID 04f2:b328 Chicony Electronics Co., Ltd it shows USB2.0 exist. dmesg | grep USB [ 0.190016] ACPI: bus type USB registered [ 0.576972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.577171] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.587016] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.587038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.587040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.587172] hub 1-0:1.0: USB hub found [ 0.587465] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.597019] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.597039] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.597041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.597156] hub 2-0:1.0: USB hub found [ 0.597304] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.597306] uhci_hcd: USB Universal Host Controller Interface driver [ 0.609385] usbhid: USB HID core driver [ 0.889212] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.003690] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.003695] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.003945] hub 1-1:1.0: USB hub found [ 1.107301] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.221795] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.221802] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.222222] hub 2-1:1.0: USB hub found [ 1.297573] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 1.385590] usb 1-1.1: New USB device found, idVendor=04f3, idProduct=0018 [ 1.385598] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.467587] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 1.488936] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.489131] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.489134] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.492795] hub 3-0:1.0: USB hub found [ 1.493336] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.493360] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.493362] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.493491] hub 4-0:1.0: USB hub found [ 1.557334] usb 1-1.2: New USB device found, idVendor=8087, idProduct=07da [ 1.557339] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.630685] usb 1-1.3: new high-speed USB device number 5 using ehci-pci [ 1.813000] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b328 [ 1.813004] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.813007] usb 1-1.3: Product: USB 2.0 Camera [ 1.969722] usb 3-1: new full-speed USB device number 2 using xhci_hcd [ 1.983005] usb 3-1: New USB device found, idVendor=1532, idProduct=0037 [ 1.983008] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.984694] hid-generic 0003:1532:0037.0002: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input0 [ 1.986820] hid-generic 0003:1532:0037.0003: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input1 [ 1.987548] hid-generic 0003:1532:0037.0004: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input2 [ 9.169171] hid-multitouch 0003:04F3:0018.0001: input,hiddev0,hidraw3: USB HID v1.11 Device [ELAN Touchscreen] on usb-0000:00:1a.0-1.1/input0 [ 9.686122] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b328) [ 9.697297] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13 [ 9.697359] USB Video Class driver (1.1.1) [ 7953.606626] usb 3-1: USB disconnect, device number 2 [ 7961.134882] usb 3-1: new full-speed USB device number 3 using xhci_hcd [ 7961.148478] usb 3-1: New USB device found, idVendor=1532, idProduct=0037 [ 7961.148481] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7961.150352] hid-generic 0003:1532:0037.0005: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input0 [ 7961.152357] hid-generic 0003:1532:0037.0006: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input1 [ 7961.153070] hid-generic 0003:1532:0037.0007: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input2 USB device found in the situation when mouse is inserted into USB3.0 I used vi /proc/bus/input/devices to see the devices connected to the computer(at this time I connect my mouse to USB2.0) I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 N: Name="AT Translated Set 2 keyboard" P: Phys=isa0060/serio0/input0 S: Sysfs=/devices/platform/i8042/serio0/input/input0 U: Uniq= H: Handlers=sysrq kbd event0 B: PROP=0 B: EV=120013 B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe B: MSC=10 B: LED=7 I: Bus=0011 Vendor=0002 Product=0007 Version=01b1 N: Name="SynPS/2 Synaptics TouchPad" P: Phys=isa0060/serio1/input0 S: Sysfs=/devices/platform/i8042/serio1/input/input1 U: Uniq= H: Handlers=mouse0 event1 B: PROP=5 B: EV=b B: KEY=e520 10000 0 0 0 0 B: ABS=660800011000003 I: Bus=0019 Vendor=0000 Product=0005 Version=0000 N: Name="Lid Switch" P: Phys=PNP0C0D/button/input0 S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 U: Uniq= H: Handlers=event2 B: PROP=0 B: EV=21 B: SW=1 I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=LNXPWRBN/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 U: Uniq= H: Handlers=kbd event3 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0019 Vendor=0000 Product=0006 Version=0000 N: Name="Video Bus" P: Phys=LNXVIDEO/video/input0 S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4 U: Uniq= H: Handlers=kbd event4 B: PROP=0 B: EV=3 B: KEY=3e000b00000000 0 0 0 I: Bus=0010 Vendor=104d Product=0000 Version=0000 N: Name="Sony Vaio Keys" P: Phys= S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input8 U: Uniq= H: Handlers=kbd event8 rfkill B: PROP=0 B: EV=13 B: KEY=1f160f0000 c00000000 10010000000000 200000000 600f00102c00 380000240300400 e000000000000 0 B: MSC=10 I: Bus=0010 Vendor=104d Product=0000 Version=0000 N: Name="Sony Vaio Jogdial" P: Phys= S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input9 U: Uniq= H: Handlers=mouse2 event9 B: PROP=0 B: EV=7 B: KEY=40000 0 0 0 0 B: REL=100 I: Bus=0003 Vendor=04f2 Product=b328 Version=2917 N: Name="USB 2.0 Camera" P: Phys=usb-0000:00:1a.0-1.3/button S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10 U: Uniq= H: Handlers=kbd event10 B: PROP=0 B: EV=3 B: KEY=100000 0 0 0 I: Bus=0010 Vendor=001f Product=0001 Version=0100 N: Name="PC Speaker" P: Phys=isa0061/input0 S: Sysfs=/devices/platform/pcspkr/input/input11 U: Uniq= H: Handlers=kbd event11 B: PROP=0 B: EV=40001 B: SND=6 I: Bus=0003 Vendor=04f3 Product=0018 Version=0111 N: Name="ELAN Touchscreen" P: Phys=usb-0000:00:1a.0-1.1/input0 S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input12 U: Uniq= H: Handlers=mouse3 event12 B: PROP=2 B: EV=b B: KEY=400 0 0 0 0 0 B: ABS=3273800000000003 I: Bus=0019 Vendor=0000 Product=0000 Version=0000 N: Name="Acer BMA150 accelerometer" P: Phys=wmi/input1 S: Sysfs=/devices/virtual/input/input13 U: Uniq= H: Handlers=event13 js0 B: PROP=0 B: EV=9 B: ABS=7 I: Bus=0001 Vendor=10ec Product=0269 Version=0001 N: Name="HDA Digital PCBeep" P: Phys=card0/codec#0/beep0 S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input14 U: Uniq= H: Handlers=kbd event14 B: PROP=0 B: EV=40001 B: SND=6 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HDA Intel PCH HDMI/DP,pcm=3" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15 U: Uniq= H: Handlers=event15 B: PROP=0 B: EV=21 B: SW=140 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HDA Intel PCH Headphone" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input16 U: Uniq= H: Handlers=event16 B: PROP=0 B: EV=21 B: SW=4 So this thing is that I cannot found the mouse I inserted. when I use command sudo demsg | tail Those result is in the situation when the mouse is in USB2.0 port sudo dmesg | tail root's password: [ 2091.493842] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:3c:07:54:54:be:c4:86:dd SRC=fe80:0000:0000:0000:3e07:54ff:fe54:bec4 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=1356 TC=0 HOPLIMIT=255 FLOWLBL=600290 PROTO=UDP SPT=5353 DPT=5353 LEN=1316 [ 2145.622163] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:c8:bc:c8:94:46:1f:86:dd SRC=fe80:0000:0000:0000:cabc:c8ff:fe94:461f DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=202 TC=0 HOPLIMIT=255 FLOWLBL=936031 PROTO=UDP SPT=5353 DPT=5353 LEN=162 [ 2146.632739] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:c8:bc:c8:94:46:1f:86:dd SRC=fe80:0000:0000:0000:cabc:c8ff:fe94:461f DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=202 TC=0 HOPLIMIT=255 FLOWLBL=936031 PROTO=UDP SPT=5353 DPT=5353 LEN=162 [ 2158.723799] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:c8:bc:c8:94:46:1f:86:dd SRC=fe80:0000:0000:0000:cabc:c8ff:fe94:461f DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=202 TC=0 HOPLIMIT=255 FLOWLBL=936031 PROTO=UDP SPT=5353 DPT=5353 LEN=162 [ 2185.816563] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:28:37:37:42:d2:8d:86:dd SRC=fe80:0000:0000:0000:2a37:37ff:fe42:d28d DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=269 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=229 [ 2207.235648] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:c8:bc:c8:94:46:1f:86:dd SRC=fe80:0000:0000:0000:cabc:c8ff:fe94:461f DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=285 TC=0 HOPLIMIT=255 FLOWLBL=936031 PROTO=UDP SPT=5353 DPT=5353 LEN=245 [ 2211.370625] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:c8:bc:c8:94:46:1f:86:dd SRC=fe80:0000:0000:0000:cabc:c8ff:fe94:461f DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=285 TC=0 HOPLIMIT=255 FLOWLBL=936031 PROTO=UDP SPT=5353 DPT=5353 LEN=245 [ 2211.691327] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:70:cd:60:87:be:92:86:dd SRC=fe80:0000:0000:0000:72cd:60ff:fe87:be92 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=131 CODE=0 [ 2215.348428] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:70:cd:60:87:be:92:86:dd SRC=fe80:0000:0000:0000:72cd:60ff:fe87:be92 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=131 CODE=0 [ 2231.710295] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:c8:bc:c8:94:46:1f:86:dd SRC=fe80:0000:0000:0000:cabc:c8ff:fe94:461f DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=750 TC=0 HOPLIMIT=255 FLOWLBL=936031 PROTO=UDP SPT=5353 DPT=5353 LEN=710 The result following is got when the mouse is disconnected from USB2.0 and connect to USB3.0 li@linux-ednq:~> sudo dmesg | tail [ 2284.294718] usb 3-1: New USB device found, idVendor=1532, idProduct=0037 [ 2284.294725] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2284.294728] usb 3-1: Product: Razer DeathAdder 2013 [ 2284.294731] usb 3-1: Manufacturer: Razer [ 2284.296235] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input22 [ 2284.296449] hid-generic 0003:1532:0037.000A: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input0 [ 2284.298359] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input23 [ 2284.298525] hid-generic 0003:1532:0037.000B: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input1 [ 2284.299162] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/input/input24 [ 2284.299244] hid-generic 0003:1532:0037.000C: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input2 After that disconnect the mouse from USB3.0 then connect it to USB2.0 sudo dmesg | tail [ 2284.296449] hid-generic 0003:1532:0037.000A: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input0 [ 2284.298359] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input23 [ 2284.298525] hid-generic 0003:1532:0037.000B: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input1 [ 2284.299162] input: Razer Razer DeathAdder 2013 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/input/input24 [ 2284.299244] hid-generic 0003:1532:0037.000C: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder 2013] on usb-0000:00:14.0-1/input2 [ 2293.186455] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:a8:20:66:30:52:ea:86:dd SRC=fe80:0000:0000:0000:aa20:66ff:fe30:52ea DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=158 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=118 [ 2313.204435] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:3c:07:54:54:be:c4:86:dd SRC=fe80:0000:0000:0000:3e07:54ff:fe54:bec4 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=1356 TC=0 HOPLIMIT=255 FLOWLBL=600290 PROTO=UDP SPT=5353 DPT=5353 LEN=1316 [ 2333.146682] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:70:cd:60:87:be:92:86:dd SRC=fe80:0000:0000:0000:72cd:60ff:fe87:be92 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=549 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=509 [ 2361.510882] usb 3-1: USB disconnect, device number 6 [ 2364.586477] SFW2-INext-DROP-DEFLT IN=enp14s0 OUT= MAC=33:33:00:00:00:fb:3c:07:54:30:f3:e3:86:dd SRC=fe80:0000:0000:0000:3e07:54ff:fe30:f3e3 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=123 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=83 Then I found the same problem on the Internet: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1172908 PS.My computer is Sony SVT13126CG,so it shows that all Sony T series computers have the same problem. After that I found https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1210858 The solution he proposed is rewrite the kernel of Linux. << changed pci-quirks.c in v3.11 with --- pci-quirks.c~ 2013-08-06 07:25:47.000000000 -0400 +++ pci-quirks.c 2013-08-30 14:23:47.597891192 -0400 @@ -921,9 +921,10 @@ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); hc_init: + /* if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); - + */ op_reg_base = base + XHCI_HC_LENGTH(readl(base)); /* Wait for the host controller to be ready before writing any rebuilt the kernel and the USB 2.0 ports now work!

...

So I updated my kernel li@linux-ednq:~> uname -r 3.13.0-rc3-2.g44df1ce-desktop It doesn't work. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.