http://bugzilla.novell.com/show_bug.cgi?id=502557 User x_pedro_x@hotmail.com added comment http://bugzilla.novell.com/show_bug.cgi?id=502557#c1 Summary: Merlin U740 pcmcia - USB HC takeover failed! (BIOS/SMM bug) Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: x_pedro_x@hotmail.com QAContact: qa@suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-GB; rv:1.9.0.9) Gecko/2009041500 SUSE/3.0.9-0.1.1 Firefox/3.0.9 Hi, After upgrading from openSUSE 11 x86, to openSUSE 11.1 (x86_64) system, my merlin u740 3G (pcmcia) card stopped working, the card works (in the same computer) with Windows Vista and OpenSuSE 10.3 (32b). This card is pcmcia and it works by adding one virtual USB port. Output of /var/log/messages,lspci,lsusb,uname -a (dmesg didn't gave anything more than /var/log/messages): May 9 23:01:42 MartiniLap kernel: usbcore: registered new interface driver usbserial May 9 23:01:42 MartiniLap kernel: usbserial: USB Serial support registered for generic May 9 23:01:42 MartiniLap kernel: usbcore: registered new interface driver usbserial_generic May 9 23:01:42 MartiniLap kernel: usbserial: USB Serial Driver core May 9 23:01:51 MartiniLap kernel: pccard: card ejected from slot 0 May 9 23:02:00 MartiniLap kernel: pccard: CardBus card inserted into slot 0 May 9 23:02:00 MartiniLap kernel: PCI: 0000:0a:00.0 reg 10 32bit mmio: [0, fff] May 9 23:02:00 MartiniLap kernel: pci 0000:0a:00.0: supports D1 May 9 23:02:00 MartiniLap kernel: pci 0000:0a:00.0: supports D2 May 9 23:02:00 MartiniLap kernel: pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot May 9 23:02:00 MartiniLap kernel: pci 0000:0a:00.0: PME# disabled May 9 23:02:00 MartiniLap kernel: PCI: 0000:0a:00.1 reg 10 32bit mmio: [0, fff] May 9 23:02:00 MartiniLap kernel: pci 0000:0a:00.1: supports D1 May 9 23:02:00 MartiniLap kernel: pci 0000:0a:00.1: supports D2 May 9 23:02:00 MartiniLap kernel: pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot May 9 23:02:00 MartiniLap kernel: pci 0000:0a:00.1: PME# disabled May 9 23:02:00 MartiniLap kernel: ohci_hcd 0000:0a:00.0: enabling device (0000 -> 0002) May 9 23:02:00 MartiniLap kernel: vendor=8086 device=2448 May 9 23:02:00 MartiniLap kernel: ohci_hcd 0000:0a:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 May 9 23:02:00 MartiniLap kernel: ohci_hcd 0000:0a:00.0: setting latency timer to 64 May 9 23:02:00 MartiniLap kernel: ohci_hcd 0000:0a:00.0: OHCI Host Controller May 9 23:02:00 MartiniLap kernel: ohci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 6 May 9 23:02:08 MartiniLap kernel: ohci_hcd 0000:0a:00.0: USB HC takeover failed! (BIOS/SMM bug) May 9 23:02:08 MartiniLap kernel: ohci_hcd 0000:0a:00.0: can't setup May 9 23:02:08 MartiniLap kernel: ohci_hcd 0000:0a:00.0: USB bus 6 deregistered May 9 23:02:08 MartiniLap kernel: vendor=8086 device=2448 May 9 23:02:08 MartiniLap kernel: ohci_hcd 0000:0a:00.0: PCI INT A disabled May 9 23:02:08 MartiniLap kernel: ohci_hcd 0000:0a:00.0: init 0000:0a:00.0 fail, -16 May 9 23:02:08 MartiniLap kernel: ohci_hcd: probe of 0000:0a:00.0 failed with error -16 May 9 23:02:08 MartiniLap kernel: ohci_hcd 0000:0a:00.1: enabling device (0000 -> 0002) May 9 23:02:08 MartiniLap kernel: vendor=8086 device=2448 May 9 23:02:08 MartiniLap kernel: ohci_hcd 0000:0a:00.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 May 9 23:02:08 MartiniLap kernel: ohci_hcd 0000:0a:00.1: setting latency timer to 64 May 9 23:02:08 MartiniLap kernel: ohci_hcd 0000:0a:00.1: OHCI Host Controller May 9 23:02:08 MartiniLap kernel: ohci_hcd 0000:0a:00.1: new USB bus registered, assigned bus number 6 May 9 23:02:16 MartiniLap kernel: ohci_hcd 0000:0a:00.1: USB HC takeover failed! (BIOS/SMM bug) May 9 23:02:16 MartiniLap kernel: ohci_hcd 0000:0a:00.1: can't setup May 9 23:02:16 MartiniLap kernel: ohci_hcd 0000:0a:00.1: USB bus 6 deregistered May 9 23:02:16 MartiniLap kernel: vendor=8086 device=2448 May 9 23:02:16 MartiniLap kernel: ohci_hcd 0000:0a:00.1: PCI INT B disabled May 9 23:02:16 MartiniLap kernel: ohci_hcd 0000:0a:00.1: init 0000:0a:00.1 fail, -16 May 9 23:02:16 MartiniLap kernel: ohci_hcd: probe of 0000:0a:00.1 failed with error -16 uname -a Linux MartiniLap 2.6.27.21-0.1-default #1 SMP 2009-03-31 14:50:44 +0200 x86_64 x86_64 x86_64 GNU/Linux lsusb Bus 005 Device 004: ID 05ca:1835 Ricoh Co., Ltd Visual Communication Camera VGP-VCC5 Bus 005 Device 002: ID 054c:0281 Sony Corp. Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 044e:300d Alps Electric Co., Ltd Bluetooth Controller (ALPS/UGPZ6) Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 16) 09:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 09:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 09:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) 0a:00.0 USB Controller: NEC Corporation USB (rev 43) 0a:00.1 USB Controller: NEC Corporation USB (rev 43) Reproducible: Always Steps to Reproduce: 1.Start the system 2.insert pcmcia card 3. Expected Results: after insertion and configurations of usbserial module this should create /dev/ttyUSB0 device. if not existing /dev/ttyUSB0 before, it should be created with mknod. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.