https://bugzilla.novell.com/show_bug.cgi?id=445856
User pczanik@genesi-usa.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=445856#c10
peter czanik changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |ASSIGNED
Info Provider|pczanik@genesi-usa.com |
--- Comment #10 from peter czanik 2008-11-19 03:12:49 MST ---
Here is a log, what happens with the latest kotd:
EFIKA 5K2 Boot Strap [RELEASE BUILD] (c) 2002-2007 bplan GmbH (BUILD 20070122
84240)
Running on CPU PVR: 0x80822014
Running on system SVR: 0x80110022
BIOS Code position: 0xFFF040D0
Setup System Config... Done.
Setup Memory Config... Done.
Setup PCI... Done.
Setup ATA... Done.
Setup USB... Done.
Setup ETH... Done.
Setup AC97... Done.
Testing 08000000 Bytes, Pass: 00000000 Failed: 00000000
RAM TEST (fill random)... Done.
cpu0: PowerPC,G2 CPUClock 396 Mhz BUSClock 132 Mhz (Version 0x8082,0x2014)
channel 0 unit 0 : ata | ST980815A | 3.ALD
ATA device not present or not responding
Welcome to SmartFirmware(tm) for bplan EFIKA5K2
Version 1.3 (20070122084838)
SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc.
All Rights Reserved.
Pegasos BIOS Extensions Copyright 2001-2007 by bplan GmbH.
All Rights Reserved.
ok boot hd:10 boot/sound.forth
ok boot hd:10 boot/zImage root=/dev/sda11
SuSE Linux zImage starting: loaded at 04000000-04857d30 (0/0/01003ed8; sp:
017ff
e80)
uncompressing ELF header done. (00000100 bytes)
Allocated 00902c44 bytes for kernel @ 02000000
Leave 005cc3f9 bytes for initrd @ 0427f906
uncompressing kernel done. (005a5564 bytes)
entering kernel at 02010000(427f906/5cc3f9/01003ed8)
OF stdout device is: /failsafe
command line: root=/dev/sda11
memory layout at init:
alloc_bottom : 0484c000
alloc_top : 30000000
alloc_top_hi : f000c000
rmo_top : 30000000
ram_top : f000c000
Looking for displays
instantiating rtas at 0x07ffb000 ... done
Applying EFIKA device tree fixups
Fixing bestcomm interrupts property
Adding Ethernet MDIO node
Adding Ethernet PHY node
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x0494d000 -> 0x0494d7b7
Device tree struct 0x0494e000 -> 0x04951000
Calling quiesce ...
returning from prom_init
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 117484k/131072k available (5452k kernel code, 13424k reserved, 172k
data
, 495k bss, 260k init)
Calibrating delay loop... 65.79 BogoMIPS (lpj=131584)
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
net_namespace: 1000 bytes
NET: Registered protocol family 16
PCI: Probing PCI hardware
bus: 00 index 0 io port: [ff7f0000, ff7fffff]
bus: 00 index 1 mmio: [80000000, bfffffff]
DMA: MPC52xx BestComm driver
DMA: MPC52xx BestComm engine @f0001200 ok !
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 5936k freed
Thermal assist unit not available
audit: initializing netlink socket (disabled)
type=2000 audit(1227092620.759:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 60
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
radeonfb 0000:00:10.0: enabling device (0000 -> 0003)
radeonfb (0000:00:10.0): cannot map FB
radeonfb: probe of 0000:00:10.0 failed with error -5
Generic RTC Driver v1.07
Generic non-volatile memory driver v1.1
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt )
Serial: MPC52xx PSC UART driver
f0002000.serial: ttyPSC0 at MMIO 0xf0002000 (irq = 129) is a MPC52xx PSC
input: Macintosh mouse button emulation as /devices/virtual/input/input0
apm_emu: PMU APM Emulation initialized.
Uniform Multi-Platform E-IDE driver
ppc-of-ohci f0001000.usb: OF OHCI
ppc-of-ohci f0001000.usb: new USB bus registered, assigned bus number 1
ppc-of-ohci f0001000.usb: irq 134, io mem 0xf0001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OF OHCI
usb usb1: Manufacturer: Linux 2.6.27.6-HEAD_20081118192917-default ohci_hcd
usb usb1: SerialNumber: PPC-OF USB
mice: PS/2 mouse device common for all mice
EDAC MC: Ver: 2.1.0 Nov 18 2008
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
registered taskstats version 1
Freeing unused kernel memory: 260k init
doing fast boot
SCSI subsystem initialized
ata: MPC52xx IDE/ATA libata driver
scsi0 : mpc52xx_ata
ata1: PATA max PIO4 ata_regs 0xf0003a00 irq 135
ata1.00: ATA-6: ST980815A, 3.ALD, max UDMA/100
ata1.00: 156301488 sectors, multi 0: LBA48
ata1.00: configured for PIO4
scsi 0:0:0:0: Direct-Access ATA ST980815A 3.AL PQ: 0 ANSI: 5
Creating device nodes with udev
udevd version 128 started
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0GB/74.5GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO
or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0GB/74.5GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO
or FUA
sda: RDSK (512) sda1 (LNX^@)(res 2 spb 1) sda2 (SWP^@)(res 2 spb 1) sda3
(EXT^C
)(res 2 spb 1) sda4 (EXT^C)(res 2 spb 1) sda5 (EXT^C)(res 2 spb 1) sda6
(LNX^@)(
res 2 spb 1) sda7 (LNX^@)(res 2 spb 1) sda8 (LNX^@)(res 2 spb 1) sda9
(LNX^@)(re
s 2 spb 1) sda10 (EXT^C)(res 2 spb 1) sda11 (EXT^C)(res 2 spb 1)
sd 0:0:0:0: [sda] Attached SCSI disk
blogd: can not open pty/tty pair: No such file or directory
resume device not found (ignoring)
Waiting for device /dev/sda11 to appear: ok
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda11
/dev/sda11: recovering journal
/dev/sda11: clean, 98551/429088 files, 562627/1714938 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda11
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.86 booting
System Boot Control: Running /etc/init.d/boot
Mounting procfs at /proc done
Mounting sysfs at /sys done
Mounting debugfs at /sys/kernel/debug done
Initializing /dev done
Mounting devpts at /dev/pts done
Boot logging started on /dev/ttyPSC0(/dev/console (deleted)) at Wed Nov 19
12:03
:52 2008
done
Starting udevd: udevd version 128 started
done
Loading drivers, configuring devices: sd 0:0:0:0: Attached scsi generic sg0
type
0
mpc52xx MII bus: probed
net eth0: Using PHY at MDIO address 16
Sound: MPC52xx PSC AC97 driver
done
Loading required kernel modules done
Activating swap-devices in /etc/fstab...
Adding 1012084k swap on /dev/sda2. Priority:-1 extents:1 across:1012done
Setting up the hardware clock done
Activating device mapper...
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@redhat.com
done
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
Checking all file systems. done
done
Mounting local file systems...
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
loop: module loaded
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted done
fuse init (API version 7.9)
Loading fuse module done
Mounting fuse control filesystem done
Creating /var/log/boot.msg done
Activating remaining swap-devices in /etc/fstab... done
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Enabling syn flood protection done
Disabling IP forwarding done
done
Setting up hostname 'linux-f0vv' done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles type=1505 audit(1227089055.036:2):
operation="profile_
load" name="/bin/ping" name2="default" pid=1029
type=1505 audit(1227089055.748:3): operation="profile_load" name="/sbin/klogd"
n
ame2="default" pid=1105
type=1505 audit(1227089057.604:4): operation="profile_load"
name="/sbin/syslog-n
g" name2="default" pid=1107
type=1505 audit(1227089059.712:5): operation="profile_load"
name="/sbin/syslogd"
name2="default" pid=1108
type=1505 audit(1227089061.684:6): operation="profile_load"
name="/usr/sbin/avah
i-daemon" name2="default" pid=1109
type=1505 audit(1227089063.472:7): operation="profile_load"
name="/usr/sbin/iden
td" name2="default" pid=1110
type=1505 audit(1227089065.144:8): operation="profile_load"
name="/usr/sbin/mdns
d" name2="default" pid=1111
type=1505 audit(1227089067.440:9): operation="profile_load"
name="/usr/sbin/nscd
" name2="default" pid=1112
type=1505 audit(1227089071.280:10): operation="profile_load"
name="/usr/sbin/ntp
d" name2="default" pid=1113
type=1505 audit(1227089072.980:11): operation="profile_load"
name="/usr/sbin/tra
ceroute" name2="default" pid=1114
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local done
INIT: Entering runlevel: 5
blogd: Can not read from fd 0: Input/output error
Boot logging started on /dev/ttyPSC0(/dev/console) at Wed Nov 19 11:04:33 2008
Master Resource Control: previous runlevel: N, switching to runlevel:5
Initializing random number generator done
Starting syslog services done
Starting D-Bus daemon done
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemon done
Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8 done
eth0 name: mpc5200 Ethernet 0
Oops: Kernel access of bad area, sig: 11 [#1]
Efika
Modules linked in: fuse loop dm_mod snd_mpc52xx_ac97(N) snd_ac97_codec snd_pcm
s
nd_timer snd soundcore fec_mpc52xx bestcomm_fec snd_page_alloc fec_mpc52xx_phy
a
c97_bus sg libphy bestcomm_gen_bd isp1760(N) sd_mod crc_t10dif pata_mpc52xx
liba
ta scsi_mod bestcomm_ata
Supported: No
NIP: c90a64ac LR: c90a6490 CTR: 00000000
REGS: c79c5970 TRAP: 0300 Tainted: G
(2.6.27.6-HEAD_20081118192917-d
efault)
MSR: 00009032 CR: 42000242 XER: 20000000
DAR: c9004038, DSISR: 22000000
TASK = c464f040[1598] 'ip' THREAD: c79c4000
GPR00: 000005f2 c79c5a20 c464f040 c6dd4010 00000000 00000002 c6dd4601 c05f6f18
GPR08: 00000001 00002a00 00000000 c9001638 22000242 100505d8 c040c808 c060024c
GPR16: c79c5b44 c79c5af8 c79c5ae8 c05774f0 c05774fc c4459020 c05774f0 c79c5b08
GPR24: c4459000 c79c5ae8 c4459010 00000000 00001002 c05870fc c79d3840 c4403ae0
NIP [c90a64ac] mpc52xx_fec_alloc_rx_buffers+0x60/0x13c [fec_mpc52xx]
LR [c90a6490] mpc52xx_fec_alloc_rx_buffers+0x44/0x13c [fec_mpc52xx]
Call Trace:
[c79c5a20] [c90a6470] mpc52xx_fec_alloc_rx_buffers+0x24/0x13c [fec_mpc52xx]
(unr
eliable)
[c79c5a40] [c90a6b90] mpc52xx_fec_open+0x118/0x1d0 [fec_mpc52xx]
[c79c5a60] [c032b3d4] dev_open+0xac/0x118
[c79c5a70] [c032ac9c] dev_change_flags+0xd0/0x1b0
[c79c5a90] [c0333e74] do_setlink+0x22c/0x2f8
[c79c5ad0] [c0335418] rtnl_newlink+0x2f0/0x4b0
[c79c5be0] [c03350fc] rtnetlink_rcv_msg+0x21c/0x248
[c79c5c00] [c0346520] netlink_rcv_skb+0x5c/0xd4
[c79c5c20] [c0334ec8] rtnetlink_rcv+0x30/0x48
[c79c5c40] [c0345f74] netlink_unicast+0x240/0x2e0
[c79c5c80] [c0346278] netlink_sendmsg+0x264/0x280
[c79c5cd0] [c031ad74] sock_sendmsg+0xbc/0x134
[c79c5dc0] [c031afb8] sys_sendmsg+0x1cc/0x260
[c79c5f00] [c031c6a8] sys_socketcall+0x284/0x2e0
[c79c5f40] [c0014324] ret_from_syscall+0x0/0x40
--- Exception: c01 at 0xfeeee64
LR = 0x100259fc
Instruction dump:
40a2000c 3860fff5 480000f0 807e00ac 4800196d 813f0020 39400000 a01f0018
55291838 817f000c 7d2901d6 380005f2 <7c0b492e> 7d6b4a14 801e00ac 2f800000
---[ end trace 99dc5f6fd49754ab ]---
/sbin/ifup-dhcp: line 159: 1598 Segmentation fault ip link set $INTERFACE
up ${MTU:+mtu $MTU} ${LLADDR:+address $LLADDR} $LINK_OPTIONS
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.