https://bugzilla.novell.com/show_bug.cgi?id=664931
https://bugzilla.novell.com/show_bug.cgi?id=664931#c4
andreas bittner changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |abittner@stud.fh-heilbronn.
| |de
--- Comment #4 from andreas bittner 2011-02-10 11:23:14 UTC ---
not sure if i understand this bug correctly... i just went from a basic normal
and pretty normally working opensuse 11.4 milestone6/6 via zypper ref - zypper
dup to opensuse 11.4 rc1.
after reboot the syslog-ng (only logging mechanism for the system,
/var/log/messages is empty (no more log entries in there after shutdown) ever
since the milestone6/6 shut down before rebooting into rc1)
----
Feb 10 11:49:22 localhost dhclient: XMT: Solicit on eth0, interval 119800ms.
Feb 10 11:51:22 localhost dhclient: XMT: Solicit on eth0, interval 114600ms.
Feb 10 11:53:16 localhost dhclient: XMT: Solicit on eth0, interval 113500ms.
Feb 10 11:54:52 localhost -- MARK --
Feb 10 11:55:00 localhost udevd[337]: can not read
'/etc/udev/rules.d/79-yast2-drivers.rules'
Feb 10 11:55:10 localhost dhclient: XMT: Solicit on eth0, interval 117220ms.
Feb 10 11:55:12 localhost kernel: Kernel logging (proc) stopped.
Feb 10 11:55:12 localhost kernel: Kernel log daemon terminating.
Feb 10 11:55:12 localhost syslog-ng[855]: Termination requested via signal,
terminating;
Feb 10 11:55:12 localhost syslog-ng[855]: syslog-ng shutting down;
version='3.2.1'
------
so now when the rc1 upgraded system rebooted, i get these error messages in
boot.msg
------------------
..
service microcode.ctl done
Checking/updating CPU microcode .. AMD fam10h or newer CPU(s) founddone
startproc: execve (/sbin/klogd) [
/sbin/klogd -c 1 -x ], [ DO_FASTBOOT=
no CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=
sysvinit-2.88 DO_BLOGD=yes REDIRECT=/dev/tty1 COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=no v
ga=0x317
RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/
DO_QUIET=no PREVL
EVEL=N LINES=44 SHLVL=2
HOME=/ DO_FORCEFSCK=no SPLASH=yes splash=silent
ROOTFS_BLKDEV=/dev/disk/by-id/ata-VBOX_HARDDISK_VBae6b2a64-
26e5f4a8-part2 _=/sbin/startproc DAEMON=/sbin/klogd ]
service earlysyslog done
Starting syslog servicesdone
Starting D-Bus daemondone
service dbus done
Loading basic firewall rules Error parsing pragma, syntax error, unexpected
$end, expecting LL_IDENTIFIER or
LL_NUMBER or LL_FLOAT or LL_STRING in /etc/syslog-ng/modules.conf at line 19,
column 21:
incl
uded from /etc/syslog-ng/scl.conf line 34, column 1
incl
uded from /etc/syslog-ng/syslog-ng.conf line 3, column 1
@define module-path "/lib/syslog-ng:/usr/lib/syslog-ng
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^
syslog-ng documentation:
http://www.balabit.com/support/documentation/?product=syslog-ng
mailing list: https://lists.balabit.hu/mailman/listinfo/syslog-ng
Error parsing main, syntax error, unexpected LL_ERROR, expecting $end in
/etc/syslog-ng/modules.conf at line
19, column 1:
included from
/etc/syslog-ng/scl.conf line 34, column 1
included from
/etc/syslog-ng/syslog-ng.conf line
3, column 1
@define module-path "/lib/syslog-ng:/usr/lib/syslog-ng
^
syslog-ng documentation:
http://www.balabit.com/support/documentation/?product=syslog-ng
mailing list: https://lists.balabit.hu/mailman/listinfo/syslog-ng
service earlyxdm start
service haldaemon start
start_daemon: execve (/usr/sbin/hald) [
/usr/sbin/hald --daemon=yes ],
[ DO_FASTBOOT=no CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh
TERM=linux ROOTFS_FSCK=0 LC_ALL=POSI
X INIT_VERSION=sysvinit-2.88 DO_BLOGD=yes REDIRECT=/dev/tty1 COLUMNS=124
PATH=/bin:/sbin:/usr/bin:/usr/sbin
vga=0x317 DO_CONFIRM=no RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg
DO_QUIET=no PREVLEVEL=N LINES=44 H
OME=/ SHLVL=2
DO_FORCEFSCK=no splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/ata-VBOX_HARDDISK_VBae6b2a64-26e5f4a
8-part2 _=/sbin/start_daemon DAEMON=/usr/sbin/hald ]
done
service SuSEfirewall2_init done
...
---------------------
i never mess with apparmor or change syslog-ng stuff or anything fancy, i was
just using/testing most of the previous milestones of 11.4, and always went
from one to another via zypper ref - zypper dup. thats all.
so is this really an apparmor problem, or something different?
thanks and regards.
btw, apparently i dont even have any kind of packages called apparmor or
similar. nor rcapparmor as file process or other kind.....
localhost:~ # rpm -aq | grep -i app
kupdateapplet-packagekit-0.9.17-1.5.i586
libpanel-applet-2-0-2.32.1-3.2.i586
libgstapp-0_10-0-0.10.32-3.1.i586
libpanel-applet-3-0-2.32.1-3.2.i586
device-mapper-1.02.49-17.1.i586
gnome-panel-applet-tracker-0.9.36-1.1.i586
kupdateapplet-0.9.17-1.5.i586
localhost:~ # rpm -aq | grep -i arm
hdparm-9.37-1.1.i586
localhost:~ # rpm -aq | grep -i log
dialog-1.1-41.2.i586
klogd-1.4.1-729.1.i586
shared-desktop-ontologies-0.5-1.2.noarch
libqdialogsolver1-1.3.0-7.30.i586
syslog-ng-3.2.2-2.1.i586
logrotate-3.7.9-4.2.i586
kdialog-4.6.0-4.1.i586
libevtlog0-0.2.9-5.2.i586
login-4.0-5.1.i586
----------
localhost:~ # uname -a
Linux localhost 2.6.37-20-default #1 SMP 2011-01-22 00:41:44 +0100 i686 athlon
i386 GNU/Linux
localhost:~ # cat /etc/SuSE-release
openSUSE 11.4 RC 1 (i586)
VERSION = 11.4
CODENAME = Celadon
--------------
different bug?
thanks.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.