https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c1 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P3 - Medium Status|NEW |ASSIGNED AssignedTo|bnc-team-xorg-bugs@forge.pr |sndirsch@novell.com |ovo.novell.com | --- Comment #1 from Stefan Dirsch 2011-01-30 21:02:21 UTC --- (In reply to comment #1)

User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; de; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13 ( .NET CLR 3.5.30729; .NET4.0C)

Hello,

opensuse 11 32-bit nvidia graphic card geforce 6600 and Dell 2001FP monitor, which able to present a 1600x1200 resolution on display. The actual resolution is 1280x1024. I want to change it with xrandr, but xrandr does let me add a 1600x1200_50.00 configuration, modeline generated with gtf. Adding modeline in /etc/X11/xorg.conf.d/50-monitor.conf is without any effect. Because all it ends with a error, I tried install nvidia. But nivdia-driver cannot beinstalled:error(http://www.trcompu.com/Computers/LinNotes/NewSuSE-11-4.html)

So I tried on /etc/X11 to generate an xorg.conf with #X -configure and get /usr/lib/xorg/modules/drivers/xgixp_drv.so: undefined symbol: LoaderReqSymLists

Any hints?

Cheers

grepi

Reproducible: Always

Steps to Reproduce: 1. 2. 3.

-- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c3 --- Comment #3 from Hans Greif 2011-01-31 18:35:24 UTC --- Created an attachment (id=411336) --> (http://bugzilla.novell.com/attachment.cgi?id=411336) xorg.0.log Using: nvidia-installer ncurses user interface -> License accepted. -> Installing NVIDIA driver version 256.44. -> Running distribution scripts executing: '/usr/lib/nvidia/pre-install'... Scanning scripts ... Resolve dependencies ... Install symlinks in /lib/mkinitrd/setup ... Install symlinks in /lib/mkinitrd/boot ... Kernel image: /boot/vmlinuz-2.6.37-20-desktop Initrd image: /boot/initrd-2.6.37-20-desktop Root device: /dev/disk/by-id/ata-WDC_WD1600JD-22HBB0_WD-WCAL92993971-part5 ( /dev/sda5) (mounted on / as ext4) Resume device: /dev/disk/by-id/ata-WDC_WD1600JD-22HBB0_WD-WCAL92993971-part1 (/dev/sda1) Kernel Modules: ata_generic thermal_sys thermal processor fan crc16 jbd2 ext 4 Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1024x768), openSUSE (1280x1024) 47280 blocks -> done. -> Performing CC sanity check with CC="cc". -> Performing CC version check with CC="cc". -> Kernel source path: '/lib/modules/2.6.37-20-desktop/source' -> Kernel output path: '/lib/modules/2.6.37-20-desktop/build' -> Performing rivafb check. -> Performing nvidiafb check. -> Performing Xen check. -> Cleaning kernel module build directory. executing: 'cd ./kernel; make clean'... -> Building kernel module: executing: 'cd ./kernel; make module SYSSRC=/lib/modules/2.6.37-20-desktop/s ource SYSOUT=/lib/modules/2.6.37-20-desktop/build'... NVIDIA: calling KBUILD... make -C /lib/modules/2.6.37-20-desktop/build \ KBUILD_SRC=/usr/src/linux-2.6.37-20 \ KBUILD_EXTMOD="/tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel" -f /usr/src/l inux-2.6.37-20/Makefile \ modules test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo " Run 'make oldconfig && make prepare' on kernel src to fix it. "; \ echo; \ /bin/false) mkdir -p /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/.tmp_versions ; rm - f /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/.tmp_versions/* make -f /usr/src/linux-2.6.37-20/scripts/Makefile.build obj=/tmp/selfgz3437/ NVIDIA-Linux-x86-256.44/kernel cc -Wp,-MD,/tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/.nv.o.d -nostdi nc -isystem /usr/lib/gcc/i586-suse-linux/4.5/include -I/usr/src/linux-2.6.37 -20/arch/x86/include -Iinclude -I/usr/src/linux-2.6.37-20/include -include include/generated/autoconf.h -I/tmp/selfgz3437/NVIDIA-Linux-x86-256.44/ker nel -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-stric t-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-sec urity -fno-delete-null-pointer-checks -O2 -m32 -msoft-float -mregparm=3 -fre g-struct-return -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -mac cumulate-outgoing-args -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -pipe -Wno-sign-co mpare -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=2048 -fno-s tack-protector -fomit-frame-pointer -fasynchronous-unwind-tables -g -Wdeclar ation-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stac k -DCC_HAVE_ASM_GOTO -I/tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel -Wal l -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING=\"256.44\" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUIL D_STR(s)=#s" -D"KBUIL D_BASENAME=KBUILD_STR(nv)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp /selfgz3437/NVIDIA-Linux-x86-256.44/kernel/.tmp_nv.o /tmp/selfgz3437/NVIDIA- Linux-x86-256.44/kernel/nv.c In file included from /usr/src/linux-2.6.37-20/include/linux/kernel.h:17:0, from /usr/src/linux-2.6.37-20/include/linux/sched.h:54, from /usr/src/linux-2.6.37-20/include/linux/utsname.h:35, from /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/nv-linu x.h:27, from /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/nv.c:13 : /usr/src/linux-2.6.37-20/include/linux/bitops.h: In function ‘hweight_long ’: /usr/src/linux-2.6.37-20/include/linux/bitops.h:49:26: warning: signed and u nsigned type in conditional expression In file included from /usr/src/linux-2.6.37-20/arch/x86/include/asm/mmzone.h :2:0, from /usr/src/linux-2.6.37-20/include/linux/mmzone.h:797, from /usr/src/linux-2.6.37-20/include/linux/topology.h:32, from /usr/src/linux-2.6.37-20/include/linux/sched.h:79, from /usr/src/linux-2.6.37-20/include/linux/utsname.h:35, from /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/nv-linu x.h:27, from /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/nv.c:13 : /usr/src/linux-2.6.37-20/arch/x86/include/asm/mmzone_32.h: In function ‘pf n_valid’: /usr/src/linux-2.6.37-20/arch/x86/include/asm/mmzone_32.h:87:15: warning: co mparison between signed and unsigned integer expressions In file included from /usr/src/linux-2.6.37-20/arch/x86/include/asm/uaccess. h:571:0, from /usr/src/linux-2.6.37-20/include/linux/poll.h:14, from /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/nv-linu x.h:84, from /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/nv.c:13 : /usr/src/linux-2.6.37-20/arch/x86/include/asm/uaccess_32.h: In function ‘c opy_from_user’: /usr/src/linux-2.6.37-20/arch/x86/include/asm/uaccess_32.h:209:6: warning: c omparison between signed and unsigned integer expressions /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/nv.c: At top level: /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/nv.c:426:5: error: unknown fi eld ‘ioctl’ specified in initializer /tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/nv.c:426:5: warning: initiali zation from incompatible pointer type make[4]: *** [/tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel/nv.o] Error 1 make[3]: *** [_module_/tmp/selfgz3437/NVIDIA-Linux-x86-256.44/kernel] Error 2 make[2]: *** [sub-make] Error 2 NVIDIA: left KBUILD. nvidia.ko failed to build! make[1]: *** [module] Error 1 make: *** [module] Error 2 -> Error. ERROR: Unable to build the NVIDIA kernel module. ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c4 --- Comment #4 from Stefan Dirsch 2011-01-31 19:04:55 UTC ---

Using: nvidia-installer ncurses user interface -> License accepted. -> Installing NVIDIA driver version 256.44.

That's an ancient driver version. Please use 260.19.29 or later. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c6 --- Comment #6 from Hans Greif 2011-01-31 19:54:59 UTC --- Hi, dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-20-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-01-22 00:41:44 +0100 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: G91M/Aspire T620, BIOS R03-A3 11/12/2004 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f5040] f5040 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00371fe000 page 4k [ 0.000000] kernel direct mapping tables up to 371fe000 @ ff6000-1000000 [ 0.000000] RAMDISK: 37501000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 3670f000 - 371fd6ae [ 0.000000] Move RAMDISK from 0000000037501000 - 0000000037fef6ad to 3670f000 - 371fd6ad [ 0.000000] ACPI: RSDP 000f6fa0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT bfff3000 00030 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: FACP bfff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: DSDT bfff30c0 03997 (v01 GBT AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS bfff0000 00040 [ 0.000000] ACPI: MCFG bfff6b00 0003C (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: APIC bfff6a80 00068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] could not find any ACPI SRAT memory areas. [ 0.000000] failed to get NUMA memory information from SRAT table [ 0.000000] NUMA - single node, flat memory mode [ 0.000000] Node: 0, start_pfn: 0, end_pfn: bfff0 [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 80000 84000 88000 8c000 90000 94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 b4000 b8000 bc000 [ 0.000000] node 0 pfn: [0 - bfff0] [ 0.000000] Reserving 6656 pages of KVA for lmem_map of node 0 at be400 [ 0.000000] Reserving total of 1a00 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 34c00 max_low_pfn ~ 371fe [ 0.000000] max_pfn = bfff0 [ 0.000000] 2189MB HIGHMEM available. [ 0.000000] 881MB LOWMEM available. [ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe [ 0.000000] Low memory ends at vaddr f71fe000 [ 0.000000] node 0 will remap to vaddr f4c00000 - f6600000 [ 0.000000] allocate_pgdat: node 0 NODE_DATA f4c00000 [ 0.000000] remap_numa_kva: node 0 [ 0.000000] remap_numa_kva: f4c00000 to pfn 000be400 [ 0.000000] remap_numa_kva: f4e00000 to pfn 000be600 [ 0.000000] remap_numa_kva: f5000000 to pfn 000be800 [ 0.000000] remap_numa_kva: f5200000 to pfn 000bea00 [ 0.000000] remap_numa_kva: f5400000 to pfn 000bec00 [ 0.000000] remap_numa_kva: f5600000 to pfn 000bee00 [ 0.000000] remap_numa_kva: f5800000 to pfn 000bf000 [ 0.000000] remap_numa_kva: f5a00000 to pfn 000bf200 [ 0.000000] remap_numa_kva: f5c00000 to pfn 000bf400 [ 0.000000] remap_numa_kva: f5e00000 to pfn 000bf600 [ 0.000000] remap_numa_kva: f6000000 to pfn 000bf800 [ 0.000000] remap_numa_kva: f6200000 to pfn 000bfa00 [ 0.000000] remap_numa_kva: f6400000 to pfn 000bfc00 [ 0.000000] High memory starts at vaddr f71fe000 [ 0.000000] mapped low ram: 0 - 371fe000 [ 0.000000] low ram: 0 - 371fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000371fe [ 0.000000] HighMem 0x000371fe -> 0x000bfff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfff0 [ 0.000000] On node 0 totalpages: 786303 [ 0.000000] free_area_init_node: node 0, pgdat f4c00000, node_mem_map f4c02200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1732 pages used for memmap [ 0.000000] Normal zone: 219962 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4380 pages used for memmap [ 0.000000] HighMem zone: 556246 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f4a00000 s28160 r0 d20992 u1048576 [ 0.000000] pcpu-alloc: s28160 r0 d20992 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780159 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-20-desktop root=/dev/disk/by-id/ata-WDC_WD1600JD-22HBB0_WD-WCAL92993971-part5 resume=/dev/disk/by-id/ata-WDC_WD1600JD-22HBB0_WD-WCAL92993971-part1 splash=silent quiet showopts vga=0x317 [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15728000 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000371fe:000bfff0) [ 0.000000] Memory: 3054696k/3145664k available (4695k kernel code, 63892k reserved, 3509k data, 452k init, 2215880k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB) [ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB) [ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB) [ 0.000000] .init : 0xc0a04000 - 0xc0a75000 ( 452 kB) [ 0.000000] .data : 0xc0695d6d - 0xc0a03408 (3509 kB) [ 0.000000] .text : 0xc0200000 - 0xc0695d6d (4695 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:8448 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f340c000 soft=f340e000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3192.225 MHz processor. [ 0.002006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.45 BogoMIPS (lpj=3192225) [ 0.002011] pid_max: default: 32768 minimum: 301 [ 0.002075] Security Framework initialized [ 0.002095] AppArmor: AppArmor initialized [ 0.002180] Mount-cache hash table entries: 512 [ 0.002346] Initializing cgroup subsys ns [ 0.002351] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.002355] Initializing cgroup subsys cpuacct [ 0.002360] Initializing cgroup subsys memory [ 0.002378] Initializing cgroup subsys devices [ 0.002381] Initializing cgroup subsys freezer [ 0.002384] Initializing cgroup subsys net_cls [ 0.002387] Initializing cgroup subsys blkio [ 0.002437] CPU: Physical Processor ID: 0 [ 0.002439] CPU: Processor Core ID: 0 [ 0.002442] mce: CPU supports 4 MCE banks [ 0.002459] CPU0: Thermal monitoring enabled (TM1) [ 0.002464] using mwait in idle threads. [ 0.002474] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.002481] ... version: 0 [ 0.002483] ... bit width: 40 [ 0.002485] ... generic registers: 18 [ 0.002487] ... value mask: 000000ffffffffff [ 0.002489] ... max period: 0000007fffffffff [ 0.002491] ... fixed-purpose events: 0 [ 0.002493] ... event mask: 000000000003ffff [ 0.003399] ACPI: Core revision 20101013 [ 0.010101] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.010250] Mapping cpu 0 to node 0 [ 0.010426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020769] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 [ 0.025022] NMI watchdog enabled, takes one hw-pmu counter. [ 0.029035] CPU 1 irqstacks, hard=f34a6000 soft=f34a8000 [ 0.029045] Booting Node 0, Processors #1 Ok. [ 0.002999] Initializing CPU#1 [ 0.002999] Mapping cpu 1 to node 0 [ 0.101046] NMI watchdog enabled, takes one hw-pmu counter. [ 0.102011] Brought up 2 CPUs [ 0.102018] Total of 2 processors activated (12767.17 BogoMIPS). [ 0.102454] devtmpfs: initialized [ 0.103039] regulator: core version 0.5 [ 0.103121] regulator: dummy: [ 0.103143] Time: 20:33:58 Date: 01/31/11 [ 0.103227] NET: Registered protocol family 16 [ 0.103592] ACPI: bus type pci registered [ 0.103713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.103718] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 0.103721] PCI: Using MMCONFIG for extended config space [ 0.103723] PCI: Using configuration type 1 for base access [ 0.105266] bio: create slab <bio-0> at 0 [ 0.106907] ACPI: EC: Look up EC in DSDT [ 0.113438] ACPI: Interpreter enabled [ 0.113444] ACPI: (supports S0 S3 S4 S5) [ 0.113481] ACPI: Using IOAPIC for interrupt routing [ 0.117053] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.117583] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.117935] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743) [ 0.123046] ACPI: No dock devices found. [ 0.123052] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.123204] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.123526] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.123532] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.123535] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.123539] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.123542] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored) [ 0.123559] pci 0000:00:00.0: [8086:2580] type 0 class 0x000600 [ 0.123617] pci 0000:00:01.0: [8086:2581] type 1 class 0x000604 [ 0.123662] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.123667] pci 0000:00:01.0: PME# disabled [ 0.123721] pci 0000:00:1b.0: [8086:2668] type 0 class 0x000403 [ 0.123741] pci 0000:00:1b.0: reg 10: [mem 0xf2000000-0xf2003fff 64bit] [ 0.123804] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.123809] pci 0000:00:1b.0: PME# disabled [ 0.123832] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03 [ 0.123877] pci 0000:00:1d.0: reg 20: [io 0xbc00-0xbc1f] [ 0.123915] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03 [ 0.123961] pci 0000:00:1d.1: reg 20: [io 0xb000-0xb01f] [ 0.123996] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03 [ 0.124049] pci 0000:00:1d.2: reg 20: [io 0xb400-0xb41f] [ 0.124093] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03 [ 0.124140] pci 0000:00:1d.3: reg 20: [io 0xb800-0xb81f] [ 0.124183] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03 [ 0.124203] pci 0000:00:1d.7: reg 10: [mem 0xf2004000-0xf20043ff] [ 0.124275] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.124281] pci 0000:00:1d.7: PME# disabled [ 0.124303] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.124366] pci 0000:00:1f.0: [8086:2640] type 0 class 0x000601 [ 0.124457] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.124464] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.124469] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.124474] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0800-087f [ 0.124479] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0290-029f [ 0.124499] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101 [ 0.124515] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.124526] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.124537] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.124548] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.124559] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f] [ 0.124600] pci 0000:00:1f.2: [8086:2651] type 0 class 0x000101 [ 0.124617] pci 0000:00:1f.2: reg 10: [io 0xd000-0xd007] [ 0.124627] pci 0000:00:1f.2: reg 14: [io 0xd400-0xd403] [ 0.124637] pci 0000:00:1f.2: reg 18: [io 0xd800-0xd807] [ 0.124647] pci 0000:00:1f.2: reg 1c: [io 0xdc00-0xdc03] [ 0.124656] pci 0000:00:1f.2: reg 20: [io 0xe000-0xe00f] [ 0.124690] pci 0000:00:1f.2: PME# supported from D3hot [ 0.124694] pci 0000:00:1f.2: PME# disabled [ 0.124712] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05 [ 0.124769] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.124854] pci 0000:01:00.0: [10de:0141] type 0 class 0x000300 [ 0.124867] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe3ffffff] [ 0.124881] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.124894] pci 0000:01:00.0: reg 1c: [mem 0xe4000000-0xe4ffffff 64bit] [ 0.124910] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.124946] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.124957] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.124962] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.124966] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff] [ 0.124971] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.125028] pci 0000:02:00.0: [14f1:8800] type 0 class 0x000400 [ 0.125051] pci 0000:02:00.0: reg 10: [mem 0xf0000000-0xf0ffffff] [ 0.125167] pci 0000:02:05.0: [10ec:8139] type 0 class 0x000200 [ 0.125188] pci 0000:02:05.0: reg 10: [io 0xa000-0xa0ff] [ 0.125200] pci 0000:02:05.0: reg 14: [mem 0xf1000000-0xf10000ff] [ 0.125267] pci 0000:02:05.0: supports D1 D2 [ 0.125270] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold [ 0.125275] pci 0000:02:05.0: PME# disabled [ 0.125320] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.125325] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.125330] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.125337] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.125341] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.125345] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.125361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.125595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.141864] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.141989] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.142129] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.142253] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.142377] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.142499] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.142623] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.142747] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.142807] HEST: Table is not found! [ 0.143153] SCSI subsystem initialized [ 0.143176] libata version 3.00 loaded. [ 0.143176] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.143176] vgaarb: loaded [ 0.143222] usbcore: registered new interface driver usbfs [ 0.143249] usbcore: registered new interface driver hub [ 0.143266] usbcore: registered new device driver usb [ 0.143266] PCI: Using ACPI for IRQ routing [ 0.143266] PCI: pci_cache_line_size set to 64 bytes [ 0.143266] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.143266] reserve RAM buffer: 00000000bfff0000 - 00000000bfffffff [ 0.143300] NetLabel: Initializing [ 0.143303] NetLabel: domain hash size = 128 [ 0.143305] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.143322] NetLabel: unlabeled traffic allowed by default [ 0.144027] hpet clockevent registered [ 0.144032] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.144038] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.144044] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.148028] Switching to clocksource tsc [ 0.150399] AppArmor: AppArmor Filesystem Enabled [ 0.150419] pnp: PnP ACPI init [ 0.150454] ACPI: bus type pnp registered [ 0.150674] pnp 00:00: [bus 00-ff] [ 0.150679] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.150683] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.150686] pnp 00:00: [io 0x0d00-0xffff window] [ 0.150689] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.150693] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.150696] pnp 00:00: [mem 0xc0000000-0xfebfffff window] [ 0.150790] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.150911] pnp 00:01: [io 0x0010-0x001f] [ 0.150915] pnp 00:01: [io 0x0022-0x003f] [ 0.150918] pnp 00:01: [io 0x0044-0x005f] [ 0.150921] pnp 00:01: [io 0x0062-0x0063] [ 0.150924] pnp 00:01: [io 0x0065-0x006f] [ 0.150926] pnp 00:01: [io 0x0074-0x007f] [ 0.150929] pnp 00:01: [io 0x0091-0x0093] [ 0.150932] pnp 00:01: [io 0x00a2-0x00bf] [ 0.150935] pnp 00:01: [io 0x00e0-0x00ef] [ 0.150938] pnp 00:01: [io 0x04d0-0x04d1] [ 0.150941] pnp 00:01: [io 0x0290-0x029f] [ 0.150943] pnp 00:01: [io 0x0800-0x087f] [ 0.151032] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.151059] pnp 00:02: [dma 4] [ 0.151063] pnp 00:02: [io 0x0000-0x000f] [ 0.151066] pnp 00:02: [io 0x0080-0x0090] [ 0.151069] pnp 00:02: [io 0x0094-0x009f] [ 0.151072] pnp 00:02: [io 0x00c0-0x00df] [ 0.151123] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.151149] pnp 00:03: [io 0x0070-0x0073] [ 0.151167] pnp 00:03: [irq 8] [ 0.151221] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.151241] pnp 00:04: [io 0x0061] [ 0.151295] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.151316] pnp 00:05: [io 0x00f0-0x00ff] [ 0.151323] pnp 00:05: [irq 13] [ 0.151377] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.151679] pnp 00:06: [io 0x03f0-0x03f5] [ 0.151683] pnp 00:06: [io 0x03f7] [ 0.151690] pnp 00:06: [irq 6] [ 0.151694] pnp 00:06: [dma 2] [ 0.151771] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.152211] pnp 00:07: [io 0x03f8-0x03ff] [ 0.152220] pnp 00:07: [irq 4] [ 0.152317] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.152770] pnp 00:08: [io 0x02f8-0x02ff] [ 0.152777] pnp 00:08: [irq 3] [ 0.152879] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.153497] pnp 00:09: [io 0x0378-0x037f] [ 0.153505] pnp 00:09: [irq 7] [ 0.153593] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.153834] pnp 00:0a: [irq 12] [ 0.153906] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.153965] pnp 00:0b: [io 0x0060] [ 0.153968] pnp 00:0b: [io 0x0064] [ 0.153975] pnp 00:0b: [irq 1] [ 0.154034] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.154117] pnp 00:0c: [io 0x0400-0x04bf] [ 0.154200] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.154723] pnp 00:0d: [mem 0xc0000000-0xcfffffff] [ 0.154818] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.155326] pnp 00:0e: [mem 0x000d0000-0x000d7fff] [ 0.155330] pnp 00:0e: [mem 0x000f0000-0x000f7fff] [ 0.155333] pnp 00:0e: [mem 0x000f8000-0x000fbfff] [ 0.155336] pnp 00:0e: [mem 0x000fc000-0x000fffff] [ 0.155339] pnp 00:0e: [mem 0xbfff0000-0xbfffffff] [ 0.155342] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.155345] pnp 00:0e: [mem 0x00100000-0xbffeffff] [ 0.155348] pnp 00:0e: [mem 0xfec00000-0xfec00fff] [ 0.155351] pnp 00:0e: [mem 0xfed13000-0xfed1dfff] [ 0.155354] pnp 00:0e: [mem 0xfed20000-0xfed8ffff] [ 0.155357] pnp 00:0e: [mem 0xfee00000-0xfee00fff] [ 0.155360] pnp 00:0e: [mem 0xffb00000-0xffb7ffff] [ 0.155363] pnp 00:0e: [mem 0xfff00000-0xffffffff] [ 0.155366] pnp 00:0e: [mem 0x000e0000-0x000effff] [ 0.155468] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.155517] pnp 00:0f: [mem 0xffb80000-0xffbfffff] [ 0.155595] pnp 00:0f: Plug and Play ACPI device, IDs INT0800 (active) [ 0.155606] pnp: PnP ACPI: found 16 devices [ 0.155609] ACPI: ACPI bus type pnp unregistered [ 0.155627] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.155631] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.155635] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.155648] system 00:0c: [io 0x0400-0x04bf] could not be reserved [ 0.155657] system 00:0d: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.155666] system 00:0e: [mem 0x000d0000-0x000d7fff] has been reserved [ 0.155671] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.155675] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.155679] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.155683] system 00:0e: [mem 0xbfff0000-0xbfffffff] could not be reserved [ 0.155687] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.155691] system 00:0e: [mem 0x00100000-0xbffeffff] could not be reserved [ 0.155696] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.155700] system 00:0e: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.155704] system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.155708] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.155712] system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.155716] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved [ 0.155720] system 00:0e: [mem 0x000e0000-0x000effff] has been reserved [ 0.194114] pci 0000:00:01.0: BAR 15: assigned [mem 0xf2100000-0xf21fffff pref] [ 0.194120] pci 0000:01:00.0: BAR 6: assigned [mem 0xf2100000-0xf211ffff pref] [ 0.194124] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.194127] pci 0000:00:01.0: bridge window [io disabled] [ 0.194132] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff] [ 0.194137] pci 0000:00:01.0: bridge window [mem 0xf2100000-0xf21fffff pref] [ 0.194144] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.194148] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.194154] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.194158] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.194181] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.194187] pci 0000:00:01.0: setting latency timer to 64 [ 0.194196] pci 0000:00:1e.0: setting latency timer to 64 [ 0.194201] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.194204] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 0.194208] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xefffffff] [ 0.194211] pci_bus 0000:01: resource 2 [mem 0xf2100000-0xf21fffff pref] [ 0.194214] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.194217] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf1ffffff] [ 0.194221] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.194224] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff] [ 0.194325] NET: Registered protocol family 2 [ 0.194436] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.194875] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.195480] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.195917] TCP: Hash tables configured (established 131072 bind 65536) [ 0.195920] TCP reno registered [ 0.195927] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.195951] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.196198] NET: Registered protocol family 1 [ 0.196356] pci 0000:01:00.0: Boot video device [ 0.196367] PCI: CLS 32 bytes, default 64 [ 0.196461] Unpacking initramfs... [ 0.498897] Freeing initrd memory: 11196k freed [ 0.509277] Scanning for low memory corruption every 60 seconds [ 0.509541] audit: initializing netlink socket (disabled) [ 0.509569] type=2000 audit(1296506037.507:1): initialized [ 0.522185] highmem bounce pool size: 64 pages [ 0.522194] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.522469] VFS: Disk quotas dquot_6.5.2 [ 0.522521] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.522723] msgmni has been set to 415 [ 0.523041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.523047] io scheduler noop registered [ 0.523050] io scheduler deadline registered [ 0.523073] io scheduler cfq registered (default) [ 0.523332] pci-stub: invalid id string "" [ 0.523797] vesafb: framebuffer at 0xd0000000, mapped to 0xf7a80000, using 1536k, total 1536k [ 0.523801] vesafb: mode is 1024x768x16, linelength=2048, pages=0 [ 0.523804] vesafb: scrolling: redraw [ 0.523807] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.525342] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.525348] bootsplash: silentjpeg size 226682 bytes [ 0.525350] bootsplash: does not fit into framebuffer. [ 0.541767] bootsplash: ...found (1024x768, 184298 bytes, v3). [ 0.542236] bootsplash: silentjpeg size 333754 bytes [ 0.542237] bootsplash: does not fit into framebuffer. [ 0.612175] Console: switching to colour frame buffer device 124x44 [ 0.637790] fb0: VESA VGA frame buffer device [ 0.637898] ERST: Table is not found! [ 0.638177] Non-volatile memory driver v1.3 [ 0.638181] Linux agpgart interface v0.103 [ 0.638520] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.659064] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.683299] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.731520] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.757368] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.763124] ata_piix 0000:00:1f.1: version 2.13 [ 0.763152] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.763205] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.763842] scsi0 : ata_piix [ 0.764000] scsi1 : ata_piix [ 0.765425] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.765429] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.765473] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.765482] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.765553] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.766253] scsi2 : ata_piix [ 0.766386] scsi3 : ata_piix [ 0.767786] ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 19 [ 0.767790] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 19 [ 0.767979] Fixed MDIO Bus: probed [ 0.767994] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.768034] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.768061] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.768066] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.768100] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.773728] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.773753] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf2004000 [ 0.782818] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.782860] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.782864] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.782868] usb usb1: Product: EHCI Host Controller [ 0.782871] usb usb1: Manufacturer: Linux 2.6.37-20-desktop ehci_hcd [ 0.782874] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.783080] hub 1-0:1.0: USB hub found [ 0.783088] hub 1-0:1.0: 8 ports detected [ 0.783239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.783260] uhci_hcd: USB Universal Host Controller Interface driver [ 0.783313] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.783323] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.783327] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.783337] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.786847] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00 [ 0.786903] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.786908] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.786911] usb usb2: Product: UHCI Host Controller [ 0.786914] usb usb2: Manufacturer: Linux 2.6.37-20-desktop uhci_hcd [ 0.786917] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.787090] hub 2-0:1.0: USB hub found [ 0.787097] hub 2-0:1.0: 2 ports detected [ 0.787218] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.787227] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.787231] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.787245] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.790853] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000 [ 0.790910] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.790914] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.790917] usb usb3: Product: UHCI Host Controller [ 0.790920] usb usb3: Manufacturer: Linux 2.6.37-20-desktop uhci_hcd [ 0.790923] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.791097] hub 3-0:1.0: USB hub found [ 0.791105] hub 3-0:1.0: 2 ports detected [ 0.791226] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.791236] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.791240] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.791251] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.794873] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400 [ 0.794925] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.794929] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.794932] usb usb4: Product: UHCI Host Controller [ 0.794935] usb usb4: Manufacturer: Linux 2.6.37-20-desktop uhci_hcd [ 0.794938] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.795110] hub 4-0:1.0: USB hub found [ 0.795116] hub 4-0:1.0: 2 ports detected [ 0.795235] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.795244] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.795248] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.795258] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.798882] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800 [ 0.798937] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.798941] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.798945] usb usb5: Product: UHCI Host Controller [ 0.798947] usb usb5: Manufacturer: Linux 2.6.37-20-desktop uhci_hcd [ 0.798950] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.799127] hub 5-0:1.0: USB hub found [ 0.799134] hub 5-0:1.0: 2 ports detected [ 0.799257] Initializing USB Mass Storage driver... [ 0.799305] usbcore: registered new interface driver usb-storage [ 0.799307] USB Mass Storage support registered. [ 0.799325] usbcore: registered new interface driver ums-alauda [ 0.799344] usbcore: registered new interface driver ums-cypress [ 0.799362] usbcore: registered new interface driver ums-datafab [ 0.799380] usbcore: registered new interface driver ums-freecom [ 0.799400] usbcore: registered new interface driver ums-isd200 [ 0.799419] usbcore: registered new interface driver ums-jumpshot [ 0.799437] usbcore: registered new interface driver ums-karma [ 0.799455] usbcore: registered new interface driver ums-onetouch [ 0.799474] usbcore: registered new interface driver ums-sddr09 [ 0.799492] usbcore: registered new interface driver ums-sddr55 [ 0.799511] usbcore: registered new interface driver ums-usbat [ 0.799610] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.803046] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.803058] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.803227] mice: PS/2 mouse device common for all mice [ 0.803362] rtc_cmos 00:03: RTC can wake from S4 [ 0.807870] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.807899] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.807920] cpuidle: using governor ladder [ 0.807923] cpuidle: using governor menu [ 0.808392] usbcore: registered new interface driver usbhid [ 0.808395] usbhid: USB HID core driver [ 0.808780] TCP cubic registered [ 0.808860] NET: Registered protocol family 10 [ 0.809365] lo: Disabled Privacy Extensions [ 0.809720] lib80211: common routines for IEEE802.11 drivers [ 0.809724] lib80211_crypt: registered algorithm 'NULL' [ 0.809726] Registering the dns_resolver key type [ 0.809798] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5) [ 0.809817] Using IPI No-Shortcut mode [ 0.809988] PM: Checking hibernation image partition /dev/disk/by-id/ata-WDC_WD1600JD-22HBB0_WD-WCAL92993971-part1 [ 0.829598] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.932640] ata3.00: ATA-6: WDC WD1600JD-22HBB0, 08.02D08, max UDMA/133 [ 0.932645] ata3.00: 312581808 sectors, multi 16: LBA48 [ 0.939568] ata3.00: configured for UDMA/133 [ 0.947382] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01118, max UDMA7 [ 0.947386] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.947488] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4081B, A100, max UDMA/33 [ 0.947497] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL10, max UDMA/33 [ 0.966387] ata4.00: configured for UDMA/133 [ 0.969341] ata1.00: configured for UDMA/33 [ 0.980120] psmouse serio1: ID: 10 00 64 [ 0.991411] ata1.01: configured for UDMA/33 [ 1.002080] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4081B A100 PQ: 0 ANSI: 5 [ 1.006040] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL10 PQ: 0 ANSI: 5 [ 1.006356] scsi 2:0:0:0: Direct-Access ATA WDC WD1600JD-22H 08.0 PQ: 0 ANSI: 5 [ 1.006561] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.006728] sd 2:0:0:0: [sda] Write Protect is off [ 1.006734] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.006743] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.006782] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.007131] sd 3:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.007325] sd 3:0:0:0: [sdb] Write Protect is off [ 1.007329] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.007374] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.034042] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input1 [ 1.057229] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 1.057753] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.064566] sda: sda1 sda2 sda3 < sda5 sda6 > [ 1.065093] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.065105] PM: Hibernation image not present or could not be loaded. [ 1.065131] registered taskstats version 1 [ 1.065366] Magic number: 11:450:600 [ 1.065494] rtc_cmos 00:03: setting system clock to 2011-01-31 20:33:58 UTC (1296506038) [ 1.065616] Freeing unused kernel memory: 452k freed [ 1.065997] Write protecting the kernel text: 4696k [ 1.066130] Write protecting the kernel read-only data: 3204k [ 1.150180] ACPI: acpi_idle registered with cpuidle [ 1.162621] udev[92]: starting version 165 [ 1.410029] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 1.570844] usb 2-1: New USB device found, idVendor=058f, idProduct=9360 [ 1.570849] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.570854] usb 2-1: Product: USB Reader [ 1.570857] usb 2-1: Manufacturer: [ 1.570860] usb 2-1: SerialNumber: 9205291 [ 1.574061] scsi4 : usb-storage 2-1:1.0 [ 1.950689] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 1.950697] PM: Basic memory bitmaps created [ 1.972247] PM: Basic memory bitmaps freed [ 2.050666] PM: Starting manual resume from disk [ 2.050670] PM: Hibernation image partition 8:1 present [ 2.050673] PM: Looking for hibernation image. [ 2.050901] PM: Image not found (code -22) [ 2.050905] PM: Hibernation image not present or could not be loaded. [ 2.202435] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 2.363041] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr [ 2.578806] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 2.624807] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 2.629785] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 2.675800] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 2.680782] sd 4:0:0:1: [sdd] Attached SCSI removable disk [ 2.727795] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 2.732777] sd 4:0:0:2: [sde] Attached SCSI removable disk [ 2.780770] sd 4:0:0:3: [sdf] Attached SCSI removable disk [ 4.579459] preloadtrace: systemtap: 1.3/0.149, base: f7d75000, memory: 32data/40text/12ctx/13net/268alloc kb, probes: 64 [ 5.412467] udev[367]: starting version 165 [ 6.119726] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 6.119827] ACPI: Power Button [PWRB] [ 6.119943] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.120044] ACPI: Power Button [PWRF] [ 6.141422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.167026] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.321191] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 6.371898] Linux video capture interface: v2.00 [ 6.486900] intel_rng: FWH not detected [ 6.527722] iTCO_vendor_support: vendor-support=0 [ 6.621990] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.638793] FDC 0 is a post-1991 82077 [ 6.650198] IT8712 SuperIO detected. [ 6.650408] parport_pc 00:09: reported by Plug and Play ACPI [ 6.650466] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 6.678313] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 6.678356] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 6.732356] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 6.732504] scsi 0:0:1:0: Attached scsi generic sg1 type 5 [ 6.732645] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.732780] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 6.732911] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 6.733072] sd 4:0:0:1: Attached scsi generic sg5 type 0 [ 6.733207] sd 4:0:0:2: Attached scsi generic sg6 type 0 [ 6.733339] sd 4:0:0:3: Attached scsi generic sg7 type 0 [ 6.817111] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.817120] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.817408] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 6.821833] ppdev: user-space parallel port driver [ 6.830677] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.830988] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 6.862233] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 6.862415] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460) [ 6.862592] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.868256] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 6.868348] 8139too 0000:02:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 6.869639] 8139too 0000:02:05.0: eth0: RealTek RTL8139 at 0xf850a000, 00:0f:ea:b5:39:8c, IRQ 21 [ 6.942409] IR NEC protocol handler initialized [ 6.990066] IR RC5(x) protocol handler initialized [ 7.037157] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.037255] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X [ 7.037297] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.100513] IR RC6 protocol handler initialized [ 7.360487] IR JVC protocol handler initialized [ 7.412151] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded [ 7.412229] cx8800 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 7.415187] cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected], frontend(s): 0 [ 7.415191] cx88[0]: TV tuner type 44, Radio tuner type -1 [ 7.455231] IR Sony protocol handler initialized [ 7.500786] hda_codec: ALC880: BIOS auto-probing. [ 7.500794] ALSA hda_codec.c:4630: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.500802] ALSA hda_codec.c:4634: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.500809] ALSA hda_codec.c:4638: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.500815] ALSA hda_codec.c:4639: mono: mono_out=0x1e [ 7.500820] ALSA hda_codec.c:4643: inputs: [ 7.500824] ALSA hda_codec.c:4649: [ 7.500828] hda_codec: Cannot set up configuration from BIOS. Using 3-stack mode... [ 7.507360] lirc_dev: IR Remote Control driver registered, major 251 [ 7.510488] IR LIRC bridge handler initialized [ 7.527089] cx88[0]: Test OK [ 7.894334] All bytes are equal. It is not a TEA5767 [ 7.894468] tuner 1-0060: chip found @ 0xc0 (cx88[0]) [ 7.957674] tuner 1-0043: chip found @ 0x86 (cx88[0]) [ 7.991749] tda9887 1-0043: creating new instance [ 7.991755] tda9887 1-0043: tda988[5/6/7] found [ 8.083462] cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01 [ 8.330151] tuner-simple 1-0060: creating new instance [ 8.330157] tuner-simple 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 8.397027] Registered IR keymap rc-winfast [ 8.397210] input: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:02:00.0/rc/rc0/input5 [ 8.397315] rc0: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:02:00.0/rc/rc0 [ 8.397327] cx88[0]/0: found at 0000:02:00.0, rev: 5, irq: 20, latency: 32, mmio: 0xf0000000 [ 8.397429] cx88[0]/0: registered device video0 [v4l2] [ 8.397494] cx88[0]/0: registered device vbi0 [ 8.397562] cx88[0]/0: registered device radio0 [ 8.525740] Adding 2104476k swap on /dev/sda1. Priority:-1 extents:1 across:2104476k [ 9.147133] device-mapper: uevent: version 1.0.3 [ 9.147423] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 9.894101] kjournald starting. Commit interval 15 seconds [ 9.894441] EXT3-fs (sda6): using internal journal [ 9.894448] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 9.939164] fuse init (API version 7.15) [ 12.227955] type=1400 audit(1296502449.660:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=907 comm="apparmor_parser" [ 12.292170] type=1400 audit(1296502449.725:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=912 comm="apparmor_parser" [ 12.431355] type=1400 audit(1296502449.864:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=916 comm="apparmor_parser" [ 12.563877] type=1400 audit(1296502449.996:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=920 comm="apparmor_parser" [ 13.127482] type=1400 audit(1296502450.560:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=925 comm="apparmor_parser" [ 13.127622] type=1400 audit(1296502450.560:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=925 comm="apparmor_parser" [ 13.127716] type=1400 audit(1296502450.560:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=925 comm="apparmor_parser" [ 13.127866] type=1400 audit(1296502450.560:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=925 comm="apparmor_parser" [ 13.262502] type=1400 audit(1296502450.695:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=929 comm="apparmor_parser" [ 13.402308] type=1400 audit(1296502450.835:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/dovecot-auth" pid=933 comm="apparmor_parser" [ 16.107463] powernow: This module only works with AMD K7 CPUs [ 16.279979] microcode: CPU0 sig=0xf41, pf=0x10, revision=0x9 [ 16.353357] microcode: CPU1 sig=0xf41, pf=0x10, revision=0x9 [ 16.357489] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 16.493003] microcode: CPU0 updated to revision 0x17, date = 2005-04-22 [ 16.495024] microcode: CPU1 updated to revision 0x17, date = 2005-04-22 [ 17.747152] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 18.061298] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 18.356374] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.411961] [drm] Initialized drm 1.1.0 20060810 [ 22.599454] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 23.470600] Bridge firewalling registered [ 23.487180] device eth0 entered promiscuous mode [ 23.495692] br0: port 1(eth0) entering forwarding state [ 23.495699] br0: port 1(eth0) entering forwarding state [ 24.468443] NET: Registered protocol family 17 [ 32.850021] eth0: no IPv6 routers present [ 34.274151] audit_printk_skb: 48 callbacks suppressed [ 34.274156] type=1400 audit(1296502471.707:28): apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 pid=1977 comm="kdm" [ 34.274188] type=1400 audit(1296502471.707:29): apparmor="DENIED" operation="change_hat" info="unconfined" error=-1 pid=1977 comm="kdm" [ 34.338014] br0: no IPv6 routers present [ 37.151843] start_kdeinit (3186): /proc/3186/oom_adj is deprecated, please use /proc/3186/oom_score_adj instead. [ 41.022422] ata3.00: configured for UDMA/133 [ 41.022434] ata3: EH complete [ 41.257291] ata4.00: configured for UDMA/133 [ 41.257303] ata4: EH complete [ 42.505613] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr,commit=0 [ 48.906783] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 48.906788] EDD information not available. [ 180.192117] SFW2-INext-DROP-DEFLT IN=br0 OUT= MAC=33:00:00:00:00:00:0f:ea:b5:39:8c:86:dd:60 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=130 CODE=0 [ 305.632131] SFW2-INext-DROP-DEFLT IN=br0 OUT= MAC=33:00:00:00:00:00:0f:ea:b5:39:8c:86:dd:60 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=130 CODE=0 [ 431.072147] SFW2-INext-DROP-DEFLT IN=br0 OUT= MAC=33:00:00:00:00:00:0f:ea:b5:39:8c:86:dd:60 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=130 CODE=0 [ 556.512147] SFW2-INext-DROP-DEFLT IN=br0 OUT= MAC=33:00:00:00:00:00:0f:ea:b5:39:8c:86:dd:60 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=130 CODE=0 [ 681.952140] SFW2-INext-DROP-DEFLT IN=br0 OUT= MAC=33:00:00:00:00:00:0f:ea:b5:39:8c:86:dd:60 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=130 CODE=0 [ 807.392149] SFW2-INext-DROP-DEFLT IN=br0 OUT= MAC=33:00:00:00:00:00:0f:ea:b5:39:8c:86:dd:60 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=130 CODE=0 [ 932.832146] SFW2-INext-DROP-DEFLT IN=br0 OUT= MAC=33:00:00:00:00:00:0f:ea:b5:39:8c:86:dd:60 SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=72 TC=0 HOPLIMIT=1 FLOWLBL=0 OPT ( ) PROTO=ICMPv6 TYPE=130 CODE=0 linux-bvlp:~ # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c8 --- Comment #8 from Hans Greif 2011-02-01 11:30:11 UTC --- Created an attachment (id=411487) --> (http://bugzilla.novell.com/attachment.cgi?id=411487) dmesg after modprobe nouveau -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #411487|text/x-log |text/plain mime type| | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c11 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO InfoProvider| |hans-juergen.greif@kabelbw. | |de --- Comment #11 from Stefan Dirsch 2011-02-01 11:47:19 UTC --- I guess nouveau is still not used as driver for X? Please run rcxdm restart and attach /var/log/Xorg.0.log. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #411595|text/x-log |text/plain mime type| | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |eich@novell.com, | |sndirsch@novell.com Component|X.Org |Kernel Summary|opensuse 11.4 milestone 6 |nouveau [GeForce 6600] DRM |X.Org Nvidia X |module inactive QAContact|xorg-maintainer-bugs@forge. |qa@suse.de |provo.novell.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c14 --- Comment #14 from Stefan Dirsch 2011-02-01 19:50:16 UTC --- Looks like the GPU is not detected at all. The same happens on a machine with no NVIDIA graphics card. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=668189 https://bugzilla.novell.com/show_bug.cgi?id=668189#c16 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |INVALID --- Comment #16 from Stefan Dirsch 2011-02-01 20:23:07 UTC --- Ok. Closing as INVALID. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.