https://bugzilla.novell.com/show_bug.cgi?id=342588#c1 Summary: Xserve G5 hangs just after "rtas_flash" during manual installation (2.6.24-rc2-4-ppc64) Product: openSUSE 11.0 Version: unspecified Platform: PowerPC-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Blocker Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: harbaugh@ncifcrf.gov QAContact: qa@suse.de Found By: Customer Xserve G5 hangs during attempt at installation via tftp. Boot log 0 > boot enet1:129.43.1.107,yaboot,129.43.1.59;255.255.255.0,;129.43.1.1 CLIENT: 000d939c7c97 129.43.1.59 SERVER: 000347b16c16 129.43.1.107 Transfer FILE: yaboot | TFTP-actual=5e602 TFTP-adler32=5c887791 load-size=5e602 adler32=5c887791 Loading ELF yaboot starting: loaded at 00040000 00063010 (0/40000/ff846d38; sp: 0006bfd0) MAC for /ht@0,f2000000/pci@2/bcom5704@4,1: 00:0d:93:9c:7c:97 MAC for /ht@0,f2000000/pci@2/bcom5704@4,1: 00:0d:93:9c:7c:97 CLIENT: 000d939c7c97 129.43.1.59 SERVER: 000347b16c16 129.43.1.107 Transfer FILE: yaboot.conf-00-0d-93-9c-7c-97 TFTP ERROR response 0 No such file or directorydownload failed: 0 MAC for /ht@0,f2000000/pci@2/bcom5704@4,1: 00:0d:93:9c:7c:97 CLIENT: 000d939c7c97 129.43.1.59 SERVER: 000347b16c16 129.43.1.107 Transfer FILE: yaboot.conf / TFTP-actual=45c TFTP-adler32=16464bd Config file 'yaboot.conf' read, 1116 bytes MAC for enet1: 00:0d:93:9c:7c:97 CLIENT: 000d939c7c97 129.43.1.59 SERVER: 000347b16c16 129.43.1.107 Transfer FILE: yaboot.txt - TFTP-actual=dc TFTP-adler32=eb30446c Welcome to openSuSE 10.3.1 (PPC)! Type "install" to start the YaST installer on this CD/DVD Type "slp" to start the YaST install via network Type "rescue" to start the rescue system on this CD/DVD Welcome to yaboot version 10.1.22-r1028.SuSE booted from '/ht@0,f2000000/pci@2/bcom5704@4,1:129.43.1.107,yaboot' Enter "help" to get some basic usage information boot: install httpinst instssh slp rescue boot: httpinst MAC for enet1: 00:0d:93:9c:7c:97 Please wait, loading kernel... CLIENT: 000d939c7c97 129.43.1.59 SERVER: 000347b16c16 129.43.1.107 Transfer FILE: inst64 | TFTP-actual=ccf8fc TFTP-adler32=a42559c1 Allocated 00e00000 bytes for executable @ 00200000 Elf32 kernel loaded... SuSE Linux zImage starting: loaded at 00200000-00ec9cbc (40000/0/ff846d38; sp: 0006bd70) uncompressing ELF header done. (00000100 bytes) Allocated 00bd8c98 bytes for kernel @ 02000000 Allocated 00a092b9 bytes for initrd @ 02bd9000 uncompressing kernel done. (007c8e28 bytes) entering kernel at 02010000(2bd9000/a092b9/ff846d38) OF stdout device is: /ht@0,f2000000/pci@3/mac-io@7/escc@13000/ch-a@13020 command line: mem=1800M console=ttyS0,57600 y2debug manual=2 linuxrc=trace shell=1 video=ofonly debug quiet sysrq=1 insmod=sym53c8xx insmod=ipr install=http://129.43.1.107/dist/suse_rsync/Factory/inst-source memory layout at init: alloc_bottom : 00000000035e3000 alloc_top : 0000000030000000 alloc_top_hi : 0000000180000000 rmo_top : 0000000030000000 ram_top : 0000000180000000 Looking for displays copying OF device tree ... Building dt strings... Building dt structure... Device tree strings 0x00000000035e4000 -> 0x00000000035e5370 Device tree struct 0x00000000035e6000 -> 0x00000000035f9000 Calling quiesce ... DO-QUIESCE finishedreturning from prom_init Hello World ! [ 0.000000] Starting Linux PPC64 #1 SMP 2007/11/08 16:31:10 UTC [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] physicalMemorySize = 0x70800000 [ 0.000000] htab_address = 0xc00000006c000000 [ 0.000000] htab_hash_mask = 0x3ffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Linux version 2.6.24-rc2-4-ppc64 (geeko@buildhost) (gcc version 4.3.0 20071016 (experimental) [trunk revision 129378] (SUSE Linux) ) #1 SMP 2007/11/08 16:31:10 UTC CF000012 Setup Arch [ 0.000000] [boot]0012 Setup Arch [ 0.000000] vmemmap cf00000000000000 allocated at c000000001000000, physical 01000000. [ 0.000000] vmemmap cf00000001000000 allocated at c000000004000000, physical 04000000. [ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=284, gen1=285 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 460800 [ 0.000000] Normal 460800 -> 460800 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 460800 CF000015 Setup Done [ 0.000000] [boot]0015 Setup Done [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 454500 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: mem=1800M console=ttyS0,57600 y2debug manual=2 linuxrc=trace shell=1 video=ofonly debug quiet sysrq=1 insmod=sym53c8xx insmod=ipr install=http://129.43.1.107/dist/suse_rsync/Factory/inst-source [ 0.250162] AppArmor: Unable to log event (1505) to audit subsys [ 0.261800] AppArmor: Unable to log event (1505) to audit subsys [ 0.273783] AppArmor: Unable to log event (1505) to audit subsys smp_core99_probe smp_core99_kick_cpu smp_core99_kick_cpu done core99_setup_cpu 0 done SuSE Linux #1 SMP 2007/11/08 16:31:10 UTC [ 1.182510] sysctl table check failed: /kernel .1 Writable sysctl directory [ 1.196382] rtas_flash: no firmware flash support -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.