https://bugzilla.novell.com/show_bug.cgi?id=802028 https://bugzilla.novell.com/show_bug.cgi?id=802028#c0 Summary: D-Link DWA-121 (RTL8192cu) kernel module do not work Classification: openSUSE Product: openSUSE 12.2 Version: Final Platform: x86-64 OS/Version: openSUSE 12.2 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: tcj@tomas.dk QAContact: qa-bugs@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.17 (KHTML, like Gecko) Chrome/24.0.1312.68 Safari/537.17 Cannot connect to access point. Feb 4 19:26:45 stue kernel: [ 16.959172] rtl8192cu: Chip version 0x10 Feb 4 19:26:45 stue kernel: [ 17.043972] rtl8192cu: MAC address: c8:be:19:f3:ad:70 Feb 4 19:26:45 stue kernel: [ 17.043982] rtl8192cu: Board Type 0 Feb 4 19:26:45 stue kernel: [ 17.044214] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1 Feb 4 19:26:45 stue kernel: [ 17.044273] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin Feb 4 19:26:45 stue kernel: [ 17.044383] usbcore: registered new interface driver rtl8192cu Feb 4 19:26:45 stue kernel: [ 17.192956] cfg80211: World regulatory domain updated: Feb 4 19:26:45 stue kernel: [ 17.192961] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Feb 4 19:26:45 stue kernel: [ 17.192965] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Feb 4 19:26:45 stue kernel: [ 17.192969] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Feb 4 19:26:45 stue kernel: [ 17.192972] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Feb 4 19:26:45 stue kernel: [ 17.192976] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Feb 4 19:26:45 stue kernel: [ 17.192979] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Feb 4 19:26:45 stue kernel: [ 17.328761] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' Feb 4 19:26:45 stue kernel: [ 17.329330] rtlwifi: wireless switch is on Feb 4 19:27:03 stue kernel: [ 42.448217] rtl8192cu: MAC auto ON okay! Feb 4 19:27:03 stue kernel: [ 42.481103] rtl8192cu: Tx queue select: 0x05Feb 4 19:34:15 stue kernel: [ 474.401312] wlan1: authenticate with 00:16:01:eb:3f:c1 Feb 4 19:34:15 stue kernel: [ 474.413376] wlan1: send auth to 00:16:01:eb:3f:c1 (try 1/3) Feb 4 19:34:15 stue kernel: [ 474.416840] wlan1: authenticated Feb 4 19:34:15 stue kernel: [ 474.429022] wlan1: associate with 00:16:01:eb:3f:c1 (try 1/3) Feb 4 19:34:15 stue kernel: [ 474.433115] wlan1: RX AssocResp from 00:16:01:eb:3f:c1 (capab=0x411 status=0 aid=7) Feb 4 19:34:15 stue kernel: [ 474.433165] wlan1: associated Feb 4 19:34:15 stue kernel: [ 474.433555] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready Feb 4 19:34:25 stue kernel: [ 484.442864] wlan1: disassociating from 00:16:01:eb:3f:c1 by local choice (reason=3) Feb 4 19:34:25 stue kernel: [ 484.444717] cfg80211: Calling CRDA to update world regulatory domain Feb 4 19:34:25 stue kernel: [ 484.445126] wlan1: deauthenticating from 00:16:01:eb:3f:c1 by local choice (reason=3) Feb 4 19:34:25 stue kernel: [ 484.447975] cfg80211: World regulatory domain updated: Feb 4 19:34:25 stue kernel: [ 484.447979] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Feb 4 19:34:25 stue kernel: [ 484.447984] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Feb 4 19:34:25 stue kernel: [ 484.447987] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Feb 4 19:34:25 stue kernel: [ 484.447991] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Feb 4 19:34:25 stue kernel: [ 484.447994] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Feb 4 19:34:25 stue kernel: [ 484.447998] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Feb 4 19:34:27 stue kernel: [ 486.227617] wlan1: authenticate with 90:f6:52:40:01:f8 Feb 4 19:34:27 stue kernel: [ 486.261812] wlan1: send auth to 90:f6:52:40:01:f8 (try 1/3) Feb 4 19:34:27 stue kernel: [ 486.462047] wlan1: send auth to 90:f6:52:40:01:f8 (try 2/3) Feb 4 19:34:27 stue kernel: [ 486.663032] wlan1: send auth to 90:f6:52:40:01:f8 (try 3/3) Feb 4 19:34:28 stue kernel: [ 486.864034] wlan1: authentication with 90:f6:52:40:01:f8 timed out Feb 4 19:34:28 stue kernel: [ 487.747676] wlan1: authenticate with 00:16:01:eb:3f:c1 Feb 4 19:34:29 stue kernel: [ 487.772778] wlan1: send auth to 00:16:01:eb:3f:c1 (try 1/3) Feb 4 19:34:29 stue kernel: [ 487.774981] wlan1: authenticated Feb 4 19:34:29 stue kernel: [ 487.787027] wlan1: associate with 00:16:01:eb:3f:c1 (try 1/3) Feb 4 19:34:29 stue kernel: [ 487.789349] wlan1: RX AssocResp from 00:16:01:eb:3f:c1 (capab=0x411 status=0 aid=7) Feb 4 19:34:29 stue kernel: [ 487.789400] wlan1: associated Feb 4 19:34:40 stue kernel: [ 498.793587] wlan1: disassociating from 00:16:01:eb:3f:c1 by local choice (reason=3) Feb 4 19:34:40 stue kernel: [ 498.795429] cfg80211: Calling CRDA to update world regulatory domain Feb 4 19:34:40 stue kernel: [ 498.796829] wlan1: deauthenticating from 00:16:01:eb:3f:c1 by local choice (reason=3) Feb 4 19:34:40 stue kernel: [ 498.798531] cfg80211: World regulatory domain updated: Feb 4 19:34:40 stue kernel: [ 498.798535] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Feb 4 19:34:40 stue kernel: [ 498.798539] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Feb 4 19:34:40 stue kernel: [ 498.798543] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Feb 4 19:34:40 stue kernel: [ 498.798546] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Feb 4 19:34:40 stue kernel: [ 498.798550] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Feb 4 19:34:40 stue kernel: [ 498.798553] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I have replaced rtl8192cu with another 8192 driver and it kind'a works (not very stable) http://cloud.github.com/downloads/dvdhrm/rt8192cu/rt8192cu-3.4.3.4369.201206... Reproducible: Always Steps to Reproduce: 1.Insert USB wireless 2.Try to connect to access point 3.Networkmanager wait forever for authentication Actual Results: Replaced and blacklist rtl8192cu. Install 8192cu. It works Expected Results: rtl8192cu should work out of the box -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.