https://bugzilla.novell.com/show_bug.cgi?id=412237
User doiggl@velocitynet.com.au added comment
https://bugzilla.novell.com/show_bug.cgi?id=412237#c6
Glenn Doig changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
Info Provider|doiggl@velocitynet.com.au |
--- Comment #6 from Glenn Doig 2008-08-07 07:44:27 MDT ---
The problem is I have no network connection when I boot from the live cd.
http://download.opensuse.org/distribution/11.1-Alpha1/iso/cd/openSUSE-11.1-A...
I must run 'dhcpcd -d eth0' to set up my network connection.
Output is:
info, eth0: dhcpcd 3.2.3 starting
info, eth0: hardware address = 00:1f:c6:32:e3:53
info, eth0: broadcasting for a lease
debug, eth0: sending DHCP_DISCOVER with xid 0x50ea6d25
debug, eth0: waiting for 20 seconds
debug, eth0: got a packet with xid 0x50ea6d25
info, eth0: offered 192.168.1.35 from 192.168.1.254 `router'
debug, eth0: sending DHCP_REQUEST with xid 0x50ea6d25
debug, eth0: waiting for 20 seconds
debug, eth0: got a packet with xid 0x50ea6d25
info, eth0: checking 192.168.1.35 is available on attached networks
debug, eth0: sending ARP probe #1
debug, eth0: sending ARP probe #2
debug, eth0: sending ARP probe #3
debug, eth0: sending ARP claim #1
debug, eth0: sending ARP claim #2
info, eth0: leased 192.168.1.35 for 86400 seconds
debug, eth0: renew in 43200 seconds
debug, eth0: rebind in 75600 seconds
info, eth0: adding IP address 192.168.1.35/24
info, eth0: adding default route via 192.168.1.254 metric 0
info, eth0: adding route to 169.254.0.0/16 metric 0
debug, eth0: writing /var/lib/dhcpcd/dhcpcd-eth0.info
debug, eth0: forking to background
info, eth0: exiting
# rcnetwork restart
Shutting down the NetworkManager done
Shutting down network interfaces:
eth0 device: nVidia Corporation MCP67 Ethernet (rev a2) done
pan0
No configuration found for pan0
Nevertheless the interface will be shut down.
bridge-utils not installed done
wlan0 device: Atheros Communications Inc. AR242x 802.11abg Wireless
PCIExpress Adapter (rev 01)
No configuration found for wlan0
Nevertheless the interface will be shut down. done
Shutting down service network . . . . . . . . . . . . . done.
Starting the NetworkManager
# ip a
1: lo: mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
inet 127.0.0.2/8 brd 127.255.255.255 scope host secondary lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: mtu 1500 qdisc pfifo_fast state
UNKNOWN qlen 1000
link/ether 00:1f:c6:32:e3:53 brd ff:ff:ff:ff:ff:ff
inet6 fe80::21f:c6ff:fe32:e353/64 scope link
valid_lft forever preferred_lft forever
3: wmaster0: mtu 1500 qdisc ieee80211 state
UNKNOWN qlen 1000
link/ieee802.11 00:15:af:7c:bd:a4 brd ff:ff:ff:ff:ff:ff
4: wlan0: mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether 00:15:af:7c:bd:a4 brd ff:ff:ff:ff:ff:ff
5: pan0: mtu 1500 qdisc noop state DOWN
link/ether 5e:52:0a:64:2c:99 brd ff:ff:ff:ff:ff:ff
# ip r
127.0.0.0/8 dev lo scope link
# cat /etc/resolv.conf
linux:~ #
***********************************************************************
***I had to to the following to get the network connection restored ***
***********************************************************************
# dhcpcd -d eth0
info, eth0: dhcpcd 3.2.3 starting
info, eth0: hardware address = 00:1f:c6:32:e3:53
info, eth0: broadcasting for a lease
debug, eth0: sending DHCP_DISCOVER with xid 0x340d1c43
debug, eth0: waiting for 20 seconds
debug, eth0: got a packet with xid 0x340d1c43
info, eth0: offered 192.168.1.35 from 192.168.1.254 `router'
debug, eth0: sending DHCP_REQUEST with xid 0x340d1c43
debug, eth0: waiting for 20 seconds
debug, eth0: got a packet with xid 0x340d1c43
info, eth0: checking 192.168.1.35 is available on attached networks
debug, eth0: sending ARP probe #1
debug, eth0: sending ARP probe #2
debug, eth0: sending ARP probe #3
debug, eth0: sending ARP claim #1
debug, eth0: sending ARP claim #2
info, eth0: leased 192.168.1.35 for 86400 seconds
debug, eth0: renew in 43200 seconds
debug, eth0: rebind in 75600 seconds
info, eth0: adding IP address 192.168.1.35/24
info, eth0: adding default route via 192.168.1.254 metric 0
info, eth0: adding route to 169.254.0.0/16 metric 0
debug, eth0: writing /var/lib/dhcpcd/dhcpcd-eth0.info
debug, eth0: forking to background
info, eth0: exiting
# ip a
1: lo: mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
inet 127.0.0.2/8 brd 127.255.255.255 scope host secondary lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: mtu 1500 qdisc pfifo_fast state
UNKNOWN qlen 1000
link/ether 00:1f:c6:32:e3:53 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.35/24 brd 192.168.1.255 scope global eth0
inet6 fe80::21f:c6ff:fe32:e353/64 scope link
valid_lft forever preferred_lft forever
3: wmaster0: mtu 1500 qdisc ieee80211 state
UNKNOWN qlen 1000
link/ieee802.11 00:15:af:7c:bd:a4 brd ff:ff:ff:ff:ff:ff
4: wlan0: mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether 00:15:af:7c:bd:a4 brd ff:ff:ff:ff:ff:ff
5: pan0: mtu 1500 qdisc noop state DOWN
link/ether 5e:52:0a:64:2c:99 brd ff:ff:ff:ff:ff:ff
# ip r
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.35
169.254.0.0/16 dev eth0 scope link
127.0.0.0/8 dev lo scope link
default via 192.168.1.254 dev eth0
# cat /etc/resolv.conf
### BEGIN INFO
#
# Modified_by: dhcpcd
# Backup: /etc/resolv.conf.saved.by.dhcpcd.eth0
# Process: dhcpcd
# Process_id: 4818
# Script: /sbin/modify_resolvconf
# Saveto:
# Info: This is a temporary resolv.conf created by service dhcpcd.
# The previous file has been saved and will be restored later.
#
# If you don't like your resolv.conf to be changed, you
# can set MODIFY_{RESOLV,NAMED}_CONF_DYNAMICALLY=no. This
# variables are placed in /etc/sysconfig/network/config.
#
# You can also configure service dhcpcd not to modify it.
#
# If you don't like dhcpcd to change your nameserver
# settings
# then either set DHCLIENT_MODIFY_RESOLV_CONF=no
# in /etc/sysconfig/network/dhcp, or
# set MODIFY_RESOLV_CONF_DYNAMICALLY=no in
# /etc/sysconfig/network/config or (manually) use dhcpcd
# with -R. If you only want to keep your searchlist, set
# DHCLIENT_KEEP_SEARCHLIST=yes in /etc/sysconfig/network/dhcp or
# (manually) use the -K option.
#
### END INFO
nameserver 192.168.1.254
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.