https://bugzilla.novell.com/show_bug.cgi?id=409386 User carlos.bessa@gmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=409386#c1 --- Comment #1 from Carlos Bessa 2008-07-18 03:17:56 MDT --- Just an update on this. I posted the same on the V4L mailing list, and got a response that this is known problem due to the "new" automatic tuner detection, it's not working properly but also does not allow to set the tuner manually. It should be affecting quite a few other models too. There is no solution yet, other than changing the source with the correct tuner and recompile. So maybe someone should close this or set it to another status? regards, Carlos -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=409386 User bphilips@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=409386#c2 --- Comment #2 from Brandon Philips 2008-08-01 20:03:33 MDT --- Hello- Can you please test this Kernel and see if manually setting the card type works again? http://beta.suse.com/private/bphilips/409386/kernel-default-2.6.26-409386.x8... Thanks, Brandon -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=409386 User carlos.bessa@gmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=409386#c3 --- Comment #3 from Carlos Bessa 2008-08-06 09:17:11 MDT --- Sure, I just need to know if i should install this in some specific way so that i can easily roll back to the previous version if something goes wrong? regards, Carlos -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=409386 User carlos.bessa@gmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=409386#c5 --- Comment #5 from Carlos Bessa 2008-08-07 04:01:44 MDT --- I tried the new 2.6.26-409386.x86_64 kernel, but it still does not work. It still defaults to tuner=61. linux-***:/home/*** # modprobe saa7134 card=94 tuner=54 linux-***:/home/*** # dmesg saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:04:00.0, rev: 240, irq: 20, latency: 64, mmio: 0x90000000 saa7133[0]: subsystem: 5168:0502, board: LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [card=94,insmod option] saa7133[0]: board init: gpio is 10000 tuner' 1-004b: chip found @ 0x96 (saa7133[0]) saa7133[0]: i2c eeprom 00: 68 51 02 05 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 e4 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 24 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tda829x 1-004b: setting tuner address to 61 tda829x 1-004b: type set to tda8290+75 saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision ff -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision ff -- invalid tda1004x: waiting for firmware upload... firmware: requesting dvb-fe-tda10046.fw firmware: requesting dvb-fe-tda10045.fw tda1004x: no firmware upload (timeout or file not found?) tda1004x: firmware upload failed tda827x_probe_version: could not read from tuner at addr: 0xc2 regards, Carlos -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=409386 User carlos.bessa@gmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=409386#c7 --- Comment #7 from Carlos Bessa 2008-08-08 03:38:59 MDT --- (In reply to comment #6 from Brandon Philips)

You always had to specify card= and tuner= to get the card to work, right? The patch should restore this functionality. Yes, that's the way it works in openSuSE 10.3, but still doesn't work for me with this new kernell. Tuner always goes to 61. Also tried with a diferent, wrong, card numbers, and the tuner also goes to 61.

Could you please attach the output from `hwinfo` so I can see if perhaps we could probe your card properly? It's attached.

You ran a rmmod before this, right? Yes, i always do a "rmmod saa1734_dvb" and "rmmod saa7134" before doing modprobe.

What does is the output of: $ cat /sys/module/saa7134/parameters/card /sys/module/saa7134/parameters/tuner linux-xxx:/home/xxx # cat /sys/module/saa7134/parameters/card /sys/module/saa7134/parameters/tuner 94,-1,-1,-1,-1,-1,-1,-1 54,-1,-1,-1,-1,-1,-1,-1

regards, Carlos -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=409386 User bphilips@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=409386#c9 --- Comment #9 from Brandon Philips 2008-08-14 12:10:16 MDT --- Hrm, strange that the Kernel didn't work. The fixes should be in the Kernel of the Day. Could you please test that? 1) Add the and enable the following URL to your repository list using Yast: http://download.opensuse.org/repositories/Kernel:/HEAD/openSUSE_Factory/ 2) Install the latest kernel-default package: zypper install -f kernel-default -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=409386 User bphilips@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=409386#c11 --- Comment #11 from Brandon Philips 2008-08-20 11:29:48 MDT --- (In reply to comment #10 from Carlos Bessa)

Sorry for the delay but i was on vacation and away from the computer. I'll try the kernel of the day through that repository, but should i uninstall that other one you had me try? and will this one also show up as a new entry at the boot menu?

This kernel should replace the kernel I had you test. And it should automatically appear in the boot menu as 2.6.27-rc3. Thanks, Brandon -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=409386 User bphilips@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=409386#c13 --- Comment #13 from Brandon Philips 2008-11-04 16:37:37 MST --- Does this still happen under 11.1 Beta4? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.