http://bugzilla.opensuse.org/show_bug.cgi?id=899405 Bug ID: 899405 Summary: Printing broken in beta1 32-bit KDE, fixed in Printing Factory repository Classification: openSUSE Product: openSUSE Factory Version: 13.2 Beta 1 Hardware: Other OS: Other Status: NEW Severity: Normal Priority: P5 - None Component: Printing Assignee: jsmeix@suse.com Reporter: hrm_sfo@sonic.net QA Contact: jsmeix@suse.com Found By: --- Blocker: --- Created attachment 608703 --> http://bugzilla.opensuse.org/attachment.cgi?id=608703&action=edit Image of printed sheet - test page, 1 of 4 I installed 13.2 beta1 32-bit KDE kernel-default on a ThinkPad X41 with legacy BIOS boot. It was the full DVD version written to a USB stick. I used ext4 file systems, and formatted / and /home. This ThinkPad X41 has two hard drives, one with 13.1, one for testing now with 13.2 beta1. Running 13.1, printing works correctly. Running 13.2 beta1, printing is not working at the moment. Another person reported the same behavior with a Lexmark Prospect Pro209 inkjet printer. With 13.2 beta1, I installed hplip and started it from YaST Printer Configuration page. The hplip set up selected driver /usr/share/cups/model/manufacturer-PPDs/hplip/hp-laserjet_pro_mfp_m127fn-hpijs.ppd.gz Using that to print a test page gave no result. The working 13.1 installation uses driver hp-laserjet_pro_mfp_m127fn-hpcups.ppd.gz so I changed to that. With this, HP Device Manager prints a test page on four sheets, in pieces that did not even form the entire page. An image of one 8œ x 11 inch sheet is in attachment cups_small.jpeg. Using YaST Printer Configuration page to try to print a test page sent nothing to the printer. The CUPS error log CUPS_error.txt is in a subsequent comment. I added the repository at http://download.opensuse.org/repositories/Printing/openSUSE_Factory/ and switched all 20 installed packages to it. That was about 9 PM San Francisco time, 28 Sep 2014. There was no change in printing behavior - still a four-sheet test page. Ever optimistic, I checked the repository about noon PDT today 29 Sep, and all packages had updates available. I installed those as shown in attachment Printing2_pkglist.txt in a subsequent comment. Lo and behold, printing now works correctly. The test pages from both HP Device Manager and YaST Printer Configuration were good, as were prints of a PDF file and a LibreOffice Writer document. Let's hope these latest packages make it into 13.2 soon. Regards, Howard -- You are receiving this mail because: You are on the CC list for the bug.