[Bug 220226] New: SATA disk not recognized during installation
https://bugzilla.novell.com/show_bug.cgi?id=220226 Summary: SATA disk not recognized during installation Product: openSUSE 10.2 Version: Beta 2 Platform: x86-64 OS/Version: SuSE Linux 10.1 Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: jstampfl@pop.tuwien.ac.at QAContact: jsrain@novell.com On my system (A64 X2 4200+ AM2 with SB600 SATA controller, 320GB SATA disk) the hard disk is not recognized during installation. By manually loading the AHCI-module the installation could proceed normally and all files from CD1-CD4 were copied to the hard disk. But during the subsequent rebooting AHCI module is loaded, but the hard disk wasn't recognized any more. The files are there (I checked with Knoppix 5.0, which runs without any problems), but Suse 10.2 wasn't able to mount neither the SWAP partition nor the root partition. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 aj@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |jstampfl@pop.tuwien.ac.at ------- Comment #1 from aj@novell.com 2006-11-12 02:59 MST ------- Which modules did you need to load manually? Please provide the output of hwinfo --all. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 ------- Comment #2 from aj@novell.com 2006-11-15 12:33 MST ------- Gerhard, please give us more info! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 ------- Comment #3 from jstampfl@pop.tuwien.ac.at 2006-11-15 13:50 MST ------- In the meantime I installed FC6 on this system, which also runs and installs without problem. With Opensuse I manually loaded module 'ahci' before installation started. By doing that, module 'libata' was automatiocally loaded successfully and the hard disk was recognized. The installation system was then copied to the disk, but I ran into other problems before I could get a terminal window to get hwinfo. How can I get hwinfo without a somehow working installation (sorry, I am no Linux specialist)? Cheers Gerhard -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 ------- Comment #4 from aj@novell.com 2006-11-16 00:49 MST ------- Switch to console 2 (ctrl+alt+2), enter hwinfo --all > /tmp/file and copy the file over somewhere. See also the FAQs on bugs.opensuse.org Since you say ahci works, I suggest to try the following: * At the first prompt before booting from CD (where you switch from boot installed system to installation) enter "hwprobe=modules.pata" * Try a normal install Does this fix it? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 ------- Comment #5 from jstampfl@pop.tuwien.ac.at 2006-11-16 14:16 MST ------- Created an attachment (id=105870) --> (https://bugzilla.novell.com/attachment.cgi?id=105870&action=view) hwinfo -all with ahci loaded manually before installation -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 ------- Comment #6 from jstampfl@pop.tuwien.ac.at 2006-11-16 14:18 MST ------- Created an attachment (id=105872) --> (https://bugzilla.novell.com/attachment.cgi?id=105872&action=view) hwinfo -all withoput manually loading module ahci this is hwinfo when I don't load module ahci manually. In this case the SATA disk is not recognized and installation has to be stopped (no disk to store the system on). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 ------- Comment #7 from jstampfl@pop.tuwien.ac.at 2006-11-16 14:21 MST ------- I attached to hwinfo's, one time with and one time without loadung module ahci manuylly. The hint to use boot option "hwprobe=modules.pata" did not solve my problem of an unrecognized SATA disk. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 aj@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team- |hare@novell.com |screening@forge.provo.novell| |.com | Status|NEEDINFO |NEW Info Provider|jstampfl@pop.tuwien.ac.at | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 hare@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|hare@novell.com |htejun@gmail.com ------- Comment #8 from hare@novell.com 2006-11-20 03:03 MST ------- Tejun, can you have a look at it? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 ------- Comment #9 from htejun@gmail.com 2006-11-20 03:33 MST ------- 1002:4380 is ATI SB600 AHCI controller support for which is recently added to ahci. How do we generate module loading table? Are they matched w/ actual module info? How multiple modules for the same device ID are prioritized? After installation, I guess ahci.ko isn't loaded by initrd. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 htejun@gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |jstampfl@pop.tuwien.ac.at ------- Comment #10 from htejun@gmail.com 2006-11-23 04:30 MST ------- Please report the result of 'hwinfo --storage'. That should tell us why ahci isn't loaded. Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 htejun@gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |RESOLVED Info Provider|jstampfl@pop.tuwien.ac.at | Resolution| |FIXED ------- Comment #11 from htejun@gmail.com 2006-11-23 23:12 MST ------- Problem solved. Please read the following thread for details. http://thread.gmane.org/gmane.linux.kernel/469468 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 ------- Comment #12 from htejun@gmail.com 2006-11-23 23:14 MST ------- Created an attachment (id=106790) --> (https://bugzilla.novell.com/attachment.cgi?id=106790&action=view) force ahci mode for sb600 sata controllers -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 htejun@gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |wolfgang.kropff@web.de ------- Comment #13 from htejun@gmail.com 2006-11-23 23:14 MST ------- *** Bug 220286 has been marked as a duplicate of this bug. *** -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220226 ------- Comment #14 from hare@novell.com 2006-11-24 00:57 MST ------- Patch from comment #12 added to our kernel CVS. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
participants (1)
-
bugzilla_noreply＠novell.com