[Bug 522287] New: Dell USB mouse is no longer seen as a mouse after latest update from Factory
http://bugzilla.novell.com/show_bug.cgi?id=522287 Summary: Dell USB mouse is no longer seen as a mouse after latest update from Factory Classification: openSUSE Product: openSUSE 11.2 Version: Milestone 3 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Hotplug AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: silviu_marin-caea@otpbank.ro QAContact: qa@suse.de Found By: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.0) Gecko/20090623 SUSE/3.5.0-4.2 Firefox/3.5 After the latest update from Factory, this mouse no longer works. I have tried on two different computers. So, with 11.2M3 fresh install, mouse is working, then upgrade to Factory, mouse is no longer working. Other USB mice don't have any problem on the same computers, only this model. Bus 001 Device 009: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x413c Dell Computer Corp. idProduct 0x3010 Optical Wheel Mouse bcdDevice 2.20 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 52 Report Descriptor: (length is 52) Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x02 ] 2 Mouse Item(Main ): Collection, data= [ 0x01 ] 1 Application Item(Local ): Usage, data= [ 0x01 ] 1 Pointer Item(Main ): Collection, data= [ 0x00 ] 0 Physical Item(Global): Usage Page, data= [ 0x09 ] 9 Buttons Item(Local ): Usage Minimum, data= [ 0x01 ] 1 Button 1 (Primary) Item(Local ): Usage Maximum, data= [ 0x03 ] 3 Button 3 (Tertiary) Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0x01 ] 1 Item(Global): Report Count, data= [ 0x03 ] 3 Item(Global): Report Size, data= [ 0x01 ] 1 Item(Main ): Input, data= [ 0x02 ] 2 Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Global): Report Count, data= [ 0x01 ] 1 Item(Global): Report Size, data= [ 0x05 ] 5 Item(Main ): Input, data= [ 0x01 ] 1 Constant Array Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x30 ] 48 Direction-X Item(Local ): Usage, data= [ 0x31 ] 49 Direction-Y Item(Local ): Usage, data= [ 0x38 ] 56 Wheel Item(Global): Logical Minimum, data= [ 0x81 ] 129 Item(Global): Logical Maximum, data= [ 0x7f ] 127 Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Report Count, data= [ 0x03 ] 3 Item(Main ): Input, data= [ 0x06 ] 6 Data Variable Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main ): End Collection, data=none Item(Main ): End Collection, data=none Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) Reproducible: Always Steps to Reproduce: 1. Install 11.2M3 2. Mouse is detected and working 3. Upgrade to latest Factory (2009-07-15) 4. Mouse is no longer working, although it appears in the list from lsusb Actual Results: Mouse not working Expected Results: Working mouse. Why do such stupid regressions happen? It's just a plain USB mouse that has been around for years and has always worked. Rhetorical question. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=522287
User meissner@novell.com added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c1
Marcus Meissner
http://bugzilla.novell.com/show_bug.cgi?id=522287
User meissner@novell.com added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c3
Marcus Meissner
http://bugzilla.novell.com/show_bug.cgi?id=522287
User silviu_marin-caea@otpbank.ro added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c4
--- Comment #4 from Silviu Marin-Caea
http://bugzilla.novell.com/show_bug.cgi?id=522287
User silviu_marin-caea@otpbank.ro added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c5
Silviu Marin-Caea
http://bugzilla.novell.com/show_bug.cgi?id=522287
User silviu_marin-caea@otpbank.ro added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c6
--- Comment #6 from Silviu Marin-Caea
http://bugzilla.novell.com/show_bug.cgi?id=522287
User silviu_marin-caea@otpbank.ro added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c7
--- Comment #7 from Silviu Marin-Caea
http://bugzilla.novell.com/show_bug.cgi?id=522287
User coolo@novell.com added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c8
Stephan Kulow
http://bugzilla.novell.com/show_bug.cgi?id=522287
User meissner@novell.com added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c9
Marcus Meissner
http://bugzilla.novell.com/show_bug.cgi?id=522287
User silviu_marin-caea@otpbank.ro added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c10
--- Comment #10 from Silviu Marin-Caea
the chinese screener assigned it to me. LOL! I was wondering too...
I have just tried again with M8, still doesn't work. However, I have noticed something. Right after I insert the M056U0 mouse, and move it, the pointer moves a short distance (3 cm), then it's all dead. Now I'm using M-UVDEL1, but I still have M056U0 around to test. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=522287
Silviu Marin-Caea
http://bugzilla.novell.com/show_bug.cgi?id=522287
Marcus Meissner
http://bugzilla.novell.com/show_bug.cgi?id=522287
User coolo@novell.com added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c11
Stephan Kulow
http://bugzilla.novell.com/show_bug.cgi?id=522287
User binner@kde.org added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c12
--- Comment #12 from Stephan Binner
Right after I insert the M056U0 mouse, and move it, the pointer moves a short distance (3 cm), then it's all dead.
Same here, for the short moment before hal unloads it again it works. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=522287
User binner@kde.org added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c13
Stephan Binner
http://bugzilla.novell.com/show_bug.cgi?id=522287
User binner@kde.org added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c14
Stephan Binner
http://bugzilla.novell.com/show_bug.cgi?id=522287
User vbotka@novell.com added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c15
Vladimir Botka
https://bugzilla.redhat.com/show_bug.cgi?id=517088 seems to indicate that it's caused by a bluez rule/update
Yes. This is the Action [1]. I have disable it and build a new package for testing [2]. [1] bluetooth-hid2hci.rules # ACTION=="add", ENV{ID_VENDOR}=="413c", ENV{ID_CLASS}=="mouse", ATTRS{bmAttributes}=="e0", KERNEL=="mouse*", RUN+="/usr/sbin/hid2hci --method dell -v $env{ID_VENDOR} -p $env{ID_MODEL} --mode hci" [2] Package bluez (Project home:vbotka:Factory) When the package is ready I would like to know if this solved the problem ? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=522287
User silviu_marin-caea@otpbank.ro added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c16
--- Comment #16 from Silviu Marin-Caea
http://bugzilla.novell.com/show_bug.cgi?id=522287
User silviu_marin-caea@otpbank.ro added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c17
Silviu Marin-Caea
http://bugzilla.novell.com/show_bug.cgi?id=522287
User binner@kde.org added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c18
--- Comment #18 from Stephan Binner
http://bugzilla.novell.com/show_bug.cgi?id=522287
User vbotka@novell.com added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c19
Vladimir Botka
http://bugzilla.novell.com/show_bug.cgi?id=522287
User binner@kde.org added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c20
--- Comment #20 from Stephan Binner
http://bugzilla.novell.com/show_bug.cgi?id=522287
User vbotka@novell.com added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c21
--- Comment #21 from Vladimir Botka
I only see an older submit request (sr#22441) to Factory for bluez which doesn't include this fix.
Now ready. Sorry for the inconveniences. 22628 State:new Creator:vbotka When:2009-10-20T11:50:19 submit: Base:System/bluez -> openSUSE:Factory Comment: '001-remove-rule-dell-mouse.patch added to disable udev action, bnc 522287'
Please ensure this fix goes into RC2. How shall I do that ? Request submit to openSUSE:11.2:Update ?
-- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=522287
User swamp@suse.com added comment
http://bugzilla.novell.com/show_bug.cgi?id=522287#c22
Swamp Workflow Management
participants (1)
-
bugzilla_noreply@novell.com