[Bug 226315] New: sax sets up incorrect display parameters during installation
https://bugzilla.novell.com/show_bug.cgi?id=226315 Summary: sax sets up incorrect display parameters during installation Product: SUSE Linux 10.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: SaX2 AssignedTo: ms@novell.com ReportedBy: kev_l@dsl.pipex.com QAContact: qa@suse.de I installed Suse10.1 on a via epia M6000 mini ITX pc. Installation detected monitor type via DDC and correctly listed vertical and horizontal frequency range (I checked these as well as screen dimensions etc during setup) When testing configuration (via the button on the setup screen) the screen goes blank and the monitor displays "out of range" message. The only way I can get this to work is by booting to a command prompt and manually running XF86Config and manually selecting a VESA monitor. When I read the resulting Xorg.conf file thus produced it has no modlines specified but gives me a working 1280x1024@60.4Hz display. The Xorg.conf file produced by the installation routine had lots of modlines specified which I can only presume are incorrect. The settings for the monitor H and V frequencies are correct however. The problem is that if I now run YAST and change any device which causes the Xorg.conf to be rewritten then I loose the display. I have since repeated the installation with the same result. Also tied Suse 10.0 with the same result. I must stress that the monitor works fine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 ms@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|ms@novell.com |sndirsch@novell.com ------- Comment #1 from ms@novell.com 2006-12-06 02:21 MST ------- Maybe you want to test the current version 10.2, I think this is a driver problem with the via driver from 10.1. Additionally you can check if the new driver (openchrome project) works for you: http://ftp.opensuse.org/pub/opensuse/repositories/X11:/Drivers:/Video:/openc... Stefan what do you think ? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 sndirsch@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |kev_l@dsl.pipex.com ------- Comment #2 from sndirsch@novell.com 2006-12-06 02:28 MST ------- Well, installing 10.2 just to test if the driver has improved sounds like overkill to me. Of course you can give the openchrome project driver a try: http://ftp.opensuse.org/pub/opensuse/repositories/X11:/Drivers:/Video:/openc... Anyway, to check what's going on exactly we need /etc/X11/xorg.conf (created by SaX2) and /var/log/Xorg.0.log (with SaX2 written xorg.conf active) first. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 ------- Comment #3 from kev_l@dsl.pipex.com 2006-12-06 13:00 MST ------- Created an attachment (id=108574) --> (https://bugzilla.novell.com/attachment.cgi?id=108574&action=view) xorg conf which was made by Suse10.1 install -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 ------- Comment #4 from kev_l@dsl.pipex.com 2006-12-06 13:01 MST ------- Created an attachment (id=108575) --> (https://bugzilla.novell.com/attachment.cgi?id=108575&action=view) log file from x when linux is started with broken conf file. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 ------- Comment #5 from kev_l@dsl.pipex.com 2006-12-06 13:04 MST ------- I did try installing the openchrome driver but found installation instructions difficult to understand. It didn't fix the problem though. The log file from this was also full of notes about missing fonts and inappropriate modleines etc. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 sndirsch@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #108575|application/octet-stream |text/plain mime type| | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 sndirsch@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #108574|application/octet-stream |text/plain mime type| | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 sndirsch@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|kev_l@dsl.pipex.com | ------- Comment #6 from sndirsch@novell.com 2006-12-06 14:01 MST ------- This is pretty strange. The driver configures 1600x1200 1400x1050 1152x768 832x624 640x480 720x400 640x400 640x350 although 1280x1024 1280x960 1152x864 1024x768 800x600 were specified. (**) VIA(0): Default mode "1600x1200": 175.5 MHz (scaled from -740.9 MHz), 81.2 kHz, 65.0 Hz (II) VIA(0): Modeline "1600x1200" 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (**) VIA(0): Default mode "1600x1200": 162.0 MHz (scaled from -436.9 MHz), 75.0 kHz, 60.0 Hz (II) VIA(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (**) VIA(0): Default mode "1400x1050": 122.0 MHz (scaled from -309.2 MHz), 64.9 kHz, 60.0 Hz (II) VIA(0): Modeline "1400x1050" 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (**) VIA(0): Default mode "1152x768": 65.0 MHz (scaled from -368.2 MHz), 44.2 kHz, 54.8 Hz (II) VIA(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync (**) VIA(0): Default mode "832x624": 57.3 MHz (scaled from 799.9 MHz), 49.7 kHz, 74.6 Hz (II) VIA(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) VIA(0): Default mode "640x480": 36.0 MHz (scaled from -275.5 MHz), 43.3 kHz, 85.0 Hz (II) VIA(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (**) VIA(0): Default mode "640x480": 31.5 MHz (scaled from 361.1 MHz), 37.5 kHz, 75.0 Hz (II) VIA(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) VIA(0): Default mode "640x480": 31.5 MHz (scaled from 361.1 MHz), 37.9 kHz, 72.8 Hz (II) VIA(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) VIA(0): Default mode "640x480": 25.2 MHz (scaled from -674.5 MHz), 31.5 kHz, 60.0 Hz (II) VIA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) VIA(0): Default mode "720x400": 35.5 MHz (scaled from 508.8 MHz), 37.9 kHz, 85.0 Hz (II) VIA(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (**) VIA(0): Default mode "640x400": 31.5 MHz (scaled from 361.1 MHz), 37.9 kHz, 85.1 Hz (II) VIA(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (**) VIA(0): Default mode "640x350": 31.5 MHz (scaled from 361.1 MHz), 37.9 kHz, 85.1 Hz (II) VIA(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync This seems to be a hardwired list in the driver. Looks like the hardware/driver does not allow to specify the clock. :-( (II) VIA(0): Not using mode "1280x1024" (no clock available for mode) (II) VIA(0): Not using mode "1280x1024" (no clock available for mode) (II) VIA(0): Not using mode "1280x1024" (no clock available for mode) (II) VIA(0): Not using mode "1280x960" (no clock available for mode) (II) VIA(0): Not using mode "1280x960" (no clock available for mode) (II) VIA(0): Not using mode "1280x960" (no clock available for mode) (II) VIA(0): Not using mode "1152x864" (no clock available for mode) (II) VIA(0): Not using mode "1152x864" (no clock available for mode) (II) VIA(0): Not using mode "1152x864" (no clock available for mode) (II) VIA(0): Not using mode "1024x768" (no clock available for mode) (II) VIA(0): Not using mode "1024x768" (no clock available for mode) (II) VIA(0): Not using mode "1024x768" (no clock available for mode) (II) VIA(0): Not using mode "800x600" (no clock available for mode) (II) VIA(0): Not using mode "800x600" (no clock available for mode) (II) VIA(0): Not using mode "800x600" (no clock available for mode) All the specified modelines are rejected. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 sndirsch@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |sndirsch@novell.com AssignedTo|sndirsch@novell.com |ms@novell.com Status|ASSIGNED |NEW ------- Comment #7 from sndirsch@novell.com 2006-12-06 14:04 MST ------- Therefore I suggest to disable generation of modelines also for the via driver. Marcus, could you take care of this? Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 ------- Comment #8 from sndirsch@novell.com 2006-12-06 14:08 MST ------- (In reply to comment #5)
I did try installing the openchrome driver but found installation instructions difficult to understand.
Are there any? ;-) Ok, installing the RPMs for SLE_10 would have been sufficient I hope.
It didn't fix the problem though. The log file from this was also full of notes about missing fonts and inappropriate modleines etc. Missing fonts? Sounds very strange. I'm still interested into a logfile for the updated driver.
-- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 ------- Comment #9 from kev_l@dsl.pipex.com 2006-12-06 16:28 MST ------- is this the driver I should install? xorg-x11-driver-video-openchrome-061206-4.1.i586.rpm There are many in the directory. Kev -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 ------- Comment #10 from sndirsch@novell.com 2006-12-07 00:47 MST ------- Yes, the openchrome-drm-kmp packages are optional and currently untested. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 ms@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|Major |Normal Status|NEW |NEEDINFO Info Provider| |kev_l@dsl.pipex.com ------- Comment #11 from ms@novell.com 2006-12-07 02:50 MST ------- If you don't mind test this driver with the current 10.2 distribution. I think this driver will fix some bugs in that area Thanks -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315 ms@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |RESOLVED Info Provider|kev_l@dsl.pipex.com | Resolution| |REMIND ------- Comment #12 from ms@novell.com 2006-12-13 06:10 MST ------- closed remind -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=226315
User coolo@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=226315#c13
Stephan Kulow
https://bugzilla.novell.com/show_bug.cgi?id=226315
User coolo@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=226315#c14
--- Comment #14 from Stephan Kulow
https://bugzilla.novell.com/show_bug.cgi?id=226315
User coolo@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=226315#c15
--- Comment #15 from Stephan Kulow
https://bugzilla.novell.com/show_bug.cgi?id=226315
User coolo@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=226315#c16
Stephan Kulow
participants (1)
-
bugzilla_noreply@novell.com