https://bugzilla.novell.com/show_bug.cgi?id=299704#c1 --- Comment #1 from Casual J. Programmer 2007-08-13 00:59:56 MST --- With a 2GB SD card deleting in Nautilus is shown as completed, removing and reinserting the card shows content is still there. dmesg | grep mmc shows: 30: None 00.0: 10600 Disk [Created at block.222] UDI: /org/freedesktop/Hal/devices/pci_1180_822_mmc_host_mmc_card_rca45928_storage Unique ID: uFBW.Fxp0d3BezAE Parent ID: 8f0y.DNpd5i_Iu+0 SysFS ID: /block/mmcblk0 SysFS BusID: mmc0:b368 SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:07:09.1/mmc_host/mmc0/mmc0:b368 Hardware Class: disk Model: "Disk" Driver: "sdhci", "mmcblk" Driver Modules: "sdhci" Device File: /dev/mmcblk0 Device Files: /dev/mmcblk0, /dev/disk/by-path/pci-mmc0:b368-, /dev/disk/by-uuid/B093-98F5, /dev/disk/by-label/SD1-4GB, /dev/disk/by-id/edd-int13_dev81 Device Number: block 179:0-179:7 Features: Hotpluggable Geometry (Logical): CHS 125632/4/16 Size: 8040448 sectors a 512 bytes Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #22 (Generic system peripheral) SD Card is SanDisk UltraII 2.0GB -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User gregkh@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c2 Greg Kroah-Hartman changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |WONTFIX --- Comment #2 from Greg Kroah-Hartman 2008-02-04 14:31:25 MST --- 4Gb support is in newer kernels. Please try the 11.0 alpha release for it, 10.3 will probably not work, sorry. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User casualprogrammer@yahoo.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c4 --- Comment #4 from Casual J. Programmer 2008-02-05 00:41:16 MST --- Notebook: Fujitsu Siemens Amilo Si 1520 Graphics: Fujitsu Siemens Mobile 945GM/GMS/GME, 943/940GML Express Monitor: QUANTADISPLAY LCD Monitor 1280x800@60Hz Wireless: Intel PRO/Wireless 3945ABG Network Connection Sound: 82801G (ICH7 Family) High Definition Audio Controller Desktop: gnome2-SuSE-10.3-145 YaST GUI: yast2-qt-2.16.18-4 OS: openSUSE 11.0 (i586) Alpha1 VERSION = 11.0 Kernel: 2.6.24-2-default rpm -qa | grep fs | sort autofs-5.0.3-5 cifs-mount-3.0.28-7 diffstat-1.45-8 dosfstools-2.11-98 e2fsprogs-1.40.4-4 gnome-vfs2-2.20.0-48 gnome-vfs2-devel-2.20.0-48 gnome-vfs2-doc-2.20.0-48 gnome-vfs2-lang-2.20.0-48 gnome-vfs-obexftp-0.4-33 gnome-vfs-sharp2-2.16.0-87 libext2fs2-1.40.4-4 libext2fs-devel-1.40.4-4 libisofs5-0.2.8-0.pm.1 limal-nfs-server-1.4.1-21 limal-nfs-server-perl-1.4.1-21 ncpfs-2.2.6-107 nfs-client-1.1.0-11 nfsidmap-0.20-47 nfs-kernel-server-1.1.0-11 ntfs-3g-1.913-4 ntfsprogs-2.0.0-6 ntfsprogs-fuse-2.0.0-6 reiserfs-3.6.19-107 squashfs-3.2-79 sshfs-1.9-10 sysfsutils-2.1.0-77 yast2-autofs-2.15.3-12 yast2-nfs-client-2.15.0-65 yast2-nfs-server-2.15.5-11 zisofs-tools-1.0.6-91 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User fseidel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c5 Frank Seidel changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |casualprogrammer@yahoo.com --- Comment #5 from Frank Seidel 2008-02-05 10:00:37 MST --- Hi, can you post the output of a "lspci -vvnn" on your system? Another question: Can you say for sure if your SD card (especially its partition table) is not corrupted? Have you tried this same card in another system, perhaps a external USB cardreader? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User casualprogrammer@yahoo.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c7 --- Comment #7 from Casual J. Programmer 2008-02-06 04:38:42 MST --- Created an attachment (id=193392) --> (https://bugzilla.novell.com/attachment.cgi?id=193392) Output from lspci -vvnn -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User casualprogrammer@yahoo.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c9 Casual J. Programmer changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|casualprogrammer@yahoo.com | --- Comment #9 from Casual J. Programmer 2008-02-06 06:01:53 MST --- Not quite: I can now browse it and copy from it, but I can not write to it. There is no entry in /etc/fstab, so it's probably automounted. Removing and reinserting achieves nothing. Trying to chown / chmod it results in chown: changing ownership of `/media/SD2-4GB': Read-only file system chmod: changing permissions of `/media/SD2-4GB/Dokument1.txt.pgp': Read-only file system "That windows does not complain is no proof the card is fully consistent." I did an CHKDSK /f E: on it returning: C:\>chkdsk /f E: Der Typ des Dateisystems ist FAT32. Volume SD2-4GB erstellt 06.10.2007 14:06 Volumenummer: EC4D-0C38 Dateien und Ordner werden überprüft... Die Datei- und Ordnerüberprüfung ist abgeschlossen. Das Dateisystem wurde überprüft. Es wurden keine Probleme festgestellt. 4.108.664.832 Bytes Speicherplatz auf dem Datenträger insgesamt 307.200 Bytes in 72 Ordner(n) 17.514.496 Bytes in 650 Datei(en) 4.090.839.040 Bytes auf dem Datenträger verfügbar 4.096 Bytes in jeder Zuordnungseinheit 1.003.092 Zuordnungseinheiten auf dem Datenträger insgesamt 998.740 Zuordnungseinheiten auf dem Datenträger verfügbar -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User fseidel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c10 Frank Seidel changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |casualprogrammer@yahoo.com --- Comment #10 from Frank Seidel 2008-02-06 08:01:03 MST --- (In reply to comment #9 from Casual J. Programmer)

Not quite:

I can now browse it and copy from it, but I can not write to it.

Do you mean with readonly switch set or not?

There is no entry in /etc/fstab, so it's probably automounted. Removing and reinserting achieves nothing.

Not sure what you are talking about. Of course there is no fstab entry. Hal mounts it when inserted. Chmoding those dirs cannot work when the device is readonly and anyway should be done via the gui you are using that knows how to change settings via hal.

"That windows does not complain is no proof the card is fully consistent."

I did an CHKDSK /f E: on it returning:

The chkdsk output is fully pointless as it says exactly nothing about the partitiontable but only of the filesystem on top of it. So it still is possible your partitiontable has problems. And i still miss a clear answer to when exactly (sd card in what state.. readonly or not) which problem occurs. Please also post again the dmesg output of your problem-situation _without_ using grep as it hides the context of the problem. Please give me at least also 5 lines before and after the mmc related part. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User casualprogrammer@yahoo.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c12 Casual J. Programmer changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|WONTFIX | --- Comment #12 from Casual J. Programmer 2008-02-22 11:44:48 MST --- "..no response for over a week (closing for now)." Not sure how this qualifies for "RESOLVED WONTFIX", anyway: remove card, Write Protect OFF, insert card, issue dmesg: Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 atkbd.c: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0). atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0). atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known. usb 3-2: USB disconnect, address 2 SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:04:0e:a4:4f:a5:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=292 DF OPT (94040000) PROTO=2 mmc0: new SD card at address b368 mmcblk4: mmc0:b368 4020224KiB mmcblk4: unknown partition table Can browse, open and write files. for "RESOLVED WONTFIX", anyway: remove card, Write Protect ON, insert card, issue dmesg: atkbd.c: Unknown key pressed (translated set 2, code 0xe2 on isa0060/serio0). atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xe2 on isa0060/serio0). atkbd.c: Use 'setkeycodes e062 <keycode>' to make it known. usb 3-2: USB disconnect, address 2 SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:04:0e:a4:4f:a5:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=292 DF OPT (94040000) PROTO=2 mmc0: new SD card at address b368 mmcblk4: mmc0:b368 4020224KiB mmcblk4: unknown partition table SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:04:0e:a4:4f:a5:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=293 DF OPT (94040000) PROTO=2 mmc0: card b368 removed mmc0: new SD card at address b368 mmcblk4: mmc0:b368 4020224KiB (ro) mmcblk4: unknown partition table Can browse, open and not write files. So it now behaves rather normal except for the mmcblk4: unknown partition table Now at: Notebook: Fujitsu Siemens Amilo Si 1520 Graphics: Fujitsu Siemens Mobile 945GM/GMS/GME, 943/940GML Express Monitor: QUANTADISPLAY LCD Monitor 1280x800@60Hz Wireless: Intel PRO/Wireless 3945ABG Network Connection Sound: 82801G (ICH7 Family) High Definition Audio Controller Desktop: gnome2-SuSE-10.3-157 YaST GUI: yast2-qt-2.16.28-2 OS: openSUSE 11.0 (i586) Alpha2 VERSION = 11.0 Kernel: 2.6.24.1-4-default rpm -qa | grep fs | sort autofs-5.0.3-13 cifs-mount-3.0.28-16 diffstat-1.45-13 dosfstools-2.11-103 e2fsprogs-1.40.5-5 gnome-vfs2-2.21.90-12 gnome-vfs2-devel-2.21.90-12 gnome-vfs2-doc-2.21.90-12 gnome-vfs2-lang-2.21.90-12 gnome-vfs-obexftp-0.4-44 gnome-vfs-sharp2-2.16.0-98 gvfs-0.1.6-13 libext2fs2-1.40.5-5 libext2fs-devel-1.40.5-5 libisofs5-0.2.8-0.pm.1 limal-nfs-server-1.4.2-4 limal-nfs-server-perl-1.4.2-4 ncpfs-2.2.6-113 nfs-client-1.1.0-12 nfsidmap-0.20-53 nfs-kernel-server-1.1.0-12 ntfs-3g-1.2216-2 ntfs-config-1.0.1-64 ntfsprogs-2.0.0-12 ntfsprogs-fuse-2.0.0-12 reiserfs-3.6.19-111 squashfs-3.2-84 sshfs-1.9-16 sysfsutils-2.1.0-82 yast2-nfs-client-2.15.0-77 yast2-nfs-server-2.15.5-23 zisofs-tools-1.0.6-96 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User casualprogrammer@yahoo.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c14 Casual J. Programmer changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |REOPENED Info Provider|casualprogrammer@yahoo.com | --- Comment #14 from Casual J. Programmer 2008-02-23 01:45:50 MST --- Comment #6 was showing the result of turning write protect to OFF Alas I don't have any other card reader available, this one is built in. I am using three MMC cards of the same size and brand, they all produce the same result. I am attaching the mbr extracted with dd if=/dev/mmcblk0 of=mbr.bin bs=512 count=1 for your perusal. lspci -vnn 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at dc100000 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at c0000000 (32-bit, prefetchable) [size=256M] Memory at dc200000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 Kernel modules: intelfb 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, fast devsel, latency 0 Memory at dc180000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Fujitsu Siemens Computer GmbH Conexant softmodem SmartCP [1734:10ad] Flags: bus master, fast devsel, latency 0, IRQ 23 Memory at dc240000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: da000000-dbffffff Prefetchable memory behind bridge: 00000000d4000000-00000000d5ffffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d6000000-d7ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d8000000-d9ffffff Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, medium devsel, latency 0, IRQ 20 I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, medium devsel, latency 0, IRQ 20 Memory at dc444000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=32 I/O behind bridge: 00005000-00005fff Memory behind bridge: dc000000-dc0fffff Capabilities: [50] Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 1810 [size=16] Kernel driver in use: ata_piix Kernel modules: piix, ata_piix 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 220 I/O ports at 18d0 [size=8] I/O ports at 18c4 [size=4] I/O ports at 18c8 [size=8] I/O ports at 18c0 [size=4] I/O ports at 18b0 [size=16] Memory at dc444400 (32-bit, non-prefetchable) [size=1K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [70] Power Management version 2 Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: medium devsel, IRQ 19 I/O ports at 18e0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Unknown device [8086:1001] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at da000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [e0] Express Legacy Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ac-12-18-ff-ff-02-13-00 Kernel driver in use: ipw3945 Kernel modules: iwl3945, ipw3945 07:08.0 Ethernet controller [0200]: Intel Corporation PRO/100 VE Network Connection [8086:1092] (rev 02) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at dc000000 (32-bit, non-prefetchable) [size=4K] I/O ports at 5000 [size=64] Capabilities: [dc] Power Management version 2 Kernel driver in use: e100 Kernel modules: e100 07:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10 [OHCI]) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at dc001000 (32-bit, non-prefetchable) [size=2K] Capabilities: [dc] Power Management version 2 Kernel driver in use: ohci1394 Kernel modules: ohci1394 07:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at dc001800 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Kernel driver in use: sdhci Kernel modules: sdhci 07:09.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 0a) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: medium devsel, IRQ 11 Memory at dc001c00 (32-bit, non-prefetchable) [disabled] [size=256] Capabilities: [80] Power Management version 2 Kernel driver in use: ricoh-mmc Kernel modules: ricoh_mmc 07:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 05) Subsystem: Fujitsu Siemens Computer GmbH Unknown device [1734:10ad] Flags: medium devsel, IRQ 11 Memory at dc002000 (32-bit, non-prefetchable) [disabled] [size=256] Capabilities: [80] Power Management version 2 07:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff) !!! Unknown header type 7f -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User fseidel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c16 Frank Seidel changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |NEEDINFO Info Provider| |casualprogrammer@yahoo.com --- Comment #16 from Frank Seidel 2008-02-23 03:47:12 MST --- (In reply to comment #14 from Casual J. Programmer)

Comment #6 was showing the result of turning write protect to OFF

Hm? But in comment #12 you just posted that with write protect being OFF it would also report "mmcblk4: unknown partition table". So, is this only a error seen from time to time are always present?

Alas I don't have any other card reader available, this one is built in. I am using three MMC cards of the same size and brand, they all produce the same result.

Ok, then please also provide the mbr's of the other two cards also.

I am attaching the mbr extracted with

dd if=/dev/mmcblk0 of=mbr.bin bs=512 count=1

for your perusal.

lspci -vnn

thanks (p.s.: you don't have to set the bug to reopen just for answering a needinfo. just mark the checkbox that your answer is providing the requested info) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User fseidel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c18 --- Comment #18 from Frank Seidel 2008-02-23 04:11:29 MST --- p.s.: what i can already say to your provided mbr: if thats really your mbr nothing surprises me. its more than defect, its not present (no bootloader and no partitiontable in it). its the direct filesystem without any partitiontable beneath. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User casualprogrammer@yahoo.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c20 --- Comment #20 from Casual J. Programmer 2008-02-23 04:16:19 MST --- Created an attachment (id=196759) --> (https://bugzilla.novell.com/attachment.cgi?id=196759) mbr of second mmc Third mmc currently not available. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User casualprogrammer@yahoo.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c22 --- Comment #22 from Casual J. Programmer 2008-02-23 04:21:36 MST --- Not sure what to make of this. If neither media contains a partition table, there probably shouldn't be one in the first place. So the error message issued is reporting a condition that is perfectly normal. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=299704 User casualprogrammer@yahoo.com added comment https://bugzilla.novell.com/show_bug.cgi?id=299704#c24 --- Comment #24 from Casual J. Programmer 2008-02-23 04:36:31 MST --- Just for your information: I just formatted the mmcs with the camera, now they have a partition table: Formatted with Windows XP: fdisk -l /dev/mmcblk1 Disk /dev/mmcblk1: 4116 MB, 4116709376 bytes 4 heads, 16 sectors/track, 125632 cylinders Units = cylinders of 64 * 512 = 32768 bytes Disk identifier: 0x6e652072 This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/mmcblk1p1 ? 27627926 54209359 850605874+ 6e Unknown Partition 1 does not end on cylinder boundary. /dev/mmcblk1p2 ? 30526934 45850528 490354992+ ff BBT Partition 2 does not end on cylinder boundary. /dev/mmcblk1p3 ? 28151302 30786496 84326194+ 74 Unknown Partition 3 does not end on cylinder boundary. /dev/mmcblk1p4 45088769 45089616 27106 0 Empty Partition 4 does not end on cylinder boundary. Partition table entries are not in disk order Formatted with Camera: fdisk -l /dev/mmcblk1 Disk /dev/mmcblk1: 4116 MB, 4116709376 bytes 11 heads, 10 sectors/track, 73094 cylinders Units = cylinders of 110 * 512 = 56320 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/mmcblk1p1 75 73095 4016128 b W95 FAT32 Peculiar -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.