[Bug 259696] New: Initialization fails on JMicron SATA2 controller
https://bugzilla.novell.com/show_bug.cgi?id=259696 Summary: Initialization fails on JMicron SATA2 controller Product: openSUSE 10.2 Version: Final Platform: 64bit OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: roger.larsson@norran.net QAContact: qa@suse.de The SATA II controller (SATA II = JMicron JMB360) on my Motherboard (ASRock 939Dual-SATAII) has been unused for quite some time. But now my hardisks are soon to become full... so I bought a new Western Digital 400GB SATA II disk. I reconfigured BIOS to use the SATA controller in SATA mode (default is ISA) and booted... "libata version 2.00 loaded. ahci 0000:03:00.0: version 2.0 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 35 (level, low) -> IRQ 90 ahci 0000:03:00.0: controller reset failed (0xffffffff) ACPI: PCI interrupt for device 0000:03:00.0 disabled ahci: probe of 0000:03:00.0 failed with error -5" I have done some digging and found this related patch: http://lkml.org/lkml/2007/3/1/453 I have not yet tried to use it on the OpenSuse 10.2 kernel... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 roger.larsson@norran.net changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |roger.larsson@norran.net ------- Comment #1 from roger.larsson@norran.net 2007-04-10 15:24 MST ------- FYI Tried with Jeff Garzik libata development tree directly (based on 2.6.21-rc5) git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Apr 5 03:01:21 icd kernel: ata1: failed to stop engine (-5) Apr 5 03:01:21 icd kernel: ACPI: PCI interrupt for device 0000:03:00.0 disabled Apr 5 03:01:24 icd kernel: SysRq : Changing Loglevel Apr 5 03:01:24 icd kernel: Loglevel set to 9 Apr 5 03:01:31 icd kernel: libata version 2.20 loaded. Apr 5 03:01:31 icd kernel: ahci 0000:03:00.0: version 2.1 Apr 5 03:01:31 icd kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 35 (level , low) -> IRQ 35 Apr 5 03:01:32 icd kernel: PCI: Setting latency timer of device 0000:03:00.0 to 64 Apr 5 03:01:32 icd kernel: ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode Apr 5 03:01:32 icd kernel: ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp p io slum part Apr 5 03:01:32 icd kernel: ata1: SATA max UDMA/133 cmd 0xffffc20000028100 ctl 0 x0000000000000000 bmdma 0x0000000000000000 irq 35 Apr 5 03:01:32 icd kernel: scsi2 : ahci Apr 5 03:01:35 icd kernel: ata1: failed to resume link for reset (errno=-16) Apr 5 03:01:35 icd kernel: ata1: prereset failed (errno=-16) Apr 5 03:01:35 icd kernel: ata1: reset failed, giving up -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #2 from roger.larsson@norran.net 2007-04-10 15:58 MST ------- Additional HW info: Info according to BIOS (who detects the drive) WDC 4000KD-55NSB2 Info about that drive on Western Digital web http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1342&p_created=1112715957 - It looks like it is an SATA I part... (It does not support 3000 MB/s at least) Complete related documents list: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_alp.php?p_sid=cOa57Nyi&p_lva=1432&p_li=&p_accessibility=0&p_redirect=&p_page=1&p_cv=&p_pv=&p_prods=0&p_cats=0&p_hidden_prods=&prod_lvl1=0&cat_lvl1=0&p_search_text=WD4000KD&p_new_search=1&p_search_type=answers.search_fnl (It does have some issues with Boadcom 5770 chipsets - or rather the other way around...) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 jeffm@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|kernel- |teheo@novell.com |maintainers@forge.provo.nove| |ll.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #3 from roger.larsson@norran.net 2007-04-12 14:26 MST ------- The disk works connected to a SATA I controller (ULi M1567) driver sata_uli / libata - Could still be a JMicron driver problem (shouldn't SATA disks work with SATA II controllers? The BIOS identifies the drive...) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 teheo@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |justin@jmicron.com Status|NEW |NEEDINFO Info Provider| |roger.larsson@norran.net ------- Comment #4 from teheo@novell.com 2007-04-12 19:56 MST ------- [cc'ing Justin, Hi!] SATA I or II doesn't seem to be the problem here. In opensuse 10.2 kernel, it's failing controller reset (AHCI HOST_RESET). In libata-dev, it's failing to stop engine - START is not being cleared. In the opensuse 10.2 kernel, your controller is reporting 0xffffffff as HOST_CTL value. It's probably doing similar in libata-dev case too. 0xffffffff is the value you get when PCI bus cannot read from the register, so PCI configuration might be off or something is actually wrong with the controller. The former one is more probable as BIOS can drive the controller properly. Please report the result of 'lspci -nnvvv' and 'hwinfo --all'. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #5 from teheo@novell.com 2007-04-12 23:03 MST ------- Please also post '/var/log/boot.msg' with the disk attached and detached. Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #6 from ethanhsiao@jmicron.com 2007-04-13 05:06 MST ------- Created an attachment (id=130975) --> (https://bugzilla.novell.com/attachment.cgi?id=130975&action=view) dmesg -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #7 from ethanhsiao@jmicron.com 2007-04-13 05:06 MST ------- Created an attachment (id=130976) --> (https://bugzilla.novell.com/attachment.cgi?id=130976&action=view) hwinfo --all -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #8 from ethanhsiao@jmicron.com 2007-04-13 05:07 MST ------- Created an attachment (id=130977) --> (https://bugzilla.novell.com/attachment.cgi?id=130977&action=view) lspci -nnvvv -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #9 from ethanhsiao@jmicron.com 2007-04-13 05:07 MST ------- I'd verified this issue under ASRock 939Dual-SATAII with openSUSE 10.2 original kernel and 2.6.21.rc6, but didn't find such issue. Please reference to the attachments. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #10 from roger.larsson@norran.net 2007-04-13 10:47 MST ------- Created an attachment (id=131080) --> (https://bugzilla.novell.com/attachment.cgi?id=131080&action=view) lspci with disk on SATA I (JMicron disabled in BIOS) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #11 from roger.larsson@norran.net 2007-04-13 10:48 MST ------- Created an attachment (id=131081) --> (https://bugzilla.novell.com/attachment.cgi?id=131081&action=view) hwinfo with disk connected to SATA I controller (JMicron disabled in BIOS) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #12 from roger.larsson@norran.net 2007-04-13 10:49 MST ------- Created an attachment (id=131082) --> (https://bugzilla.novell.com/attachment.cgi?id=131082&action=view) boot.msg with disk connected to SATA I controller (JMicron disabled) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #13 from roger.larsson@norran.net 2007-04-13 11:02 MST ------- Etan Hsiao - interesting that it works for you. Only difference I can see is firmware revision of drive your working "WDC WD4000KD-00NAB0, 01.06A01" versus mine "WDC WD4000KD-55N Rev: 04.0" And that you have SATA I controllers enabled... PCI related - I think I have bigger AGP aperture... Before I disconnect my working system I would like to know your BIOS settings. What do you have to change from default settings? (only SATA II enabled?) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #14 from ethanhsiao@jmicron.com 2007-04-15 20:17 MST ------- JMB360 works fine whatever SATA I controllers is enabled or disabled, even if JMB360 is set in IDE mode on my system. What version is your main BIOS? I can't read your attached file. It always returned "504 Gateway Time-Out". -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #15 from teheo@novell.com 2007-04-15 21:47 MST ------- Roger, I need to see boot.msg with the disk disconnected but the JMicron controller enabled. I wanna see whether the controller initialization failure goes away if the disk is disconnected. Ethan, thanks for verifying. Do you still have problem accessing the attached files? If so, let me know. I'll send them via email. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ethanhsiao@jmicron.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |ethanhsiao@jmicron.com ------- Comment #16 from ethanhsiao@jmicron.com 2007-04-15 23:05 MST ------- Tejun, I can access the attached files now, thanks. Roger, Could you try to upgrade the main BIOS? Your BIOS is P1.10, but the latest is P2.30. You can download it from http://www.asrock.com/mb/download.asp?Model=939Dual-SATA2&s= . -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #17 from roger.larsson@norran.net 2007-04-16 13:37 MST ------- I have now upgraded to BIOS P2.30 with the following changes * Selected SATA non-RAID (WD HD connected to SATA I) * Selected 1st Boot CD/DVD * Selected SATA II Enabled in SATA mode (JMicron) Booted into Linux to verify that my /home works in this mode Produced some logs from this configuration Will move disk to SATA II and reboot later... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #18 from roger.larsson@norran.net 2007-04-16 13:38 MST ------- Created an attachment (id=131496) --> (https://bugzilla.novell.com/attachment.cgi?id=131496&action=view) /var/log/boot.msg after BIOS upgrade (WD on SATA I) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #19 from roger.larsson@norran.net 2007-04-16 13:39 MST ------- Created an attachment (id=131497) --> (https://bugzilla.novell.com/attachment.cgi?id=131497&action=view) lspci after BIOS updata (WD HD on SATA I) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #20 from roger.larsson@norran.net 2007-04-16 13:40 MST ------- Created an attachment (id=131498) --> (https://bugzilla.novell.com/attachment.cgi?id=131498&action=view) hwinfo after BIOS update (WD on SATA I) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #21 from roger.larsson@norran.net 2007-04-16 13:41 MST ------- Created an attachment (id=131499) --> (https://bugzilla.novell.com/attachment.cgi?id=131499&action=view) dmesg after BIOS updata (WD on SATA I) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 roger.larsson@norran.net changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|roger.larsson@norran.net | ------- Comment #22 from roger.larsson@norran.net 2007-04-16 14:12 MST ------- Moved the WD HD to the JMicron port (after BIOS update) - Works! But there is nothing about any SATA / PCI update in any BIOS revision description... (but a CPU update, I have a 3500+) http://www.asrock.com/mb/download.asp?Model=939Dual-SATA2&s= But updating BIOS also resets user settings - might some of mine have interferred? (I will try to recreate them) Output files will follow... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #23 from roger.larsson@norran.net 2007-04-16 14:14 MST ------- Created an attachment (id=131509) --> (https://bugzilla.novell.com/attachment.cgi?id=131509&action=view) boot.msg after BIOS update with WD HD connected to SATA II -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #24 from roger.larsson@norran.net 2007-04-16 14:14 MST ------- Created an attachment (id=131510) --> (https://bugzilla.novell.com/attachment.cgi?id=131510&action=view) lspci after BIOS update with WD HD connected to SATA II -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #25 from roger.larsson@norran.net 2007-04-16 14:14 MST ------- Created an attachment (id=131511) --> (https://bugzilla.novell.com/attachment.cgi?id=131511&action=view) hwinfo after BIOS update with WD HD connected to SATA II -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #26 from roger.larsson@norran.net 2007-04-16 14:15 MST ------- Created an attachment (id=131512) --> (https://bugzilla.novell.com/attachment.cgi?id=131512&action=view) dmesg after BIOS update with WD HD connected to SATA II -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 teheo@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 teheo@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |ethanhsiao@jmicron.com ------- Comment #27 from teheo@novell.com 2007-04-16 19:18 MST ------- That's interesting. Ethan, is this a known problem? Is there a workaround? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ethanhsiao@jmicron.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |RESOLVED Info Provider|ethanhsiao@jmicron.com | Resolution| |FIXED ------- Comment #28 from ethanhsiao@jmicron.com 2007-04-16 19:41 MST ------- No, this is not a known problem. It might the latest BIOS adjusted some parameters. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 roger.larsson@norran.net changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|FIXED | ------- Comment #29 from roger.larsson@norran.net 2007-04-23 17:12 MST ------- Turned off my computer Saturday night. When I sat down at my computer this evening the problem had reappeared, I think someone in my family had tried to start it today. Since the SATA disk is on /home I could log in as root and perform the requested commands. (OpenSUSE 10.2 GM x86_64 was in the DVD player, bootloaded there then booted from hda, grub on hdb) Rebooted - still problem. Booted into Resque system - still problem Tried to boot into Windows - hung... Ctrl-Alt-Del Booted into Windows bypassed DVD - worked... (but I have no Windows partition on the SATA disk) Rebooted into Linux - still SATA problem. (I think I had removed the DVD by this time) Cold booted into Linux - worked...! I will attach a bzipped tar. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #30 from roger.larsson@norran.net 2007-04-23 17:13 MST ------- Created an attachment (id=133390) --> (https://bugzilla.novell.com/attachment.cgi?id=133390&action=view) varius logs where there are still problems -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 teheo@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |NEEDINFO Info Provider| |ethanhsiao@jmicron.com ------- Comment #31 from teheo@novell.com 2007-04-24 02:32 MST ------- This is really weird. Ethan, any ideas? Can it be a broken hardware? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ethanhsiao@jmicron.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|ethanhsiao@jmicron.com | ------- Comment #32 from ethanhsiao@jmicron.com 2007-04-24 03:03 MST ------- I have no idea about this. I've never saw such issue on this Motherboard. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 teheo@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |roger.larsson@norran.net ------- Comment #33 from teheo@novell.com 2007-04-24 03:10 MST ------- Roger, does windows ever trigger this problem? Can you try to put the JMicron controller into different operation mode in its BIOS menu? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 roger.larsson@norran.net changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|roger.larsson@norran.net | ------- Comment #34 from roger.larsson@norran.net 2007-04-25 11:42 MST ------- #32 I guess I might have some uncommon hardware, like the CardBus controller. 05:06.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80) I do not really need it anymore... So I could try to remove it. But I am not sure if the problem is consistently reproduceable. Fail on one cold start, success on an other... #33 As I said - I do not have any partition readable by Windows on this disk. But twice Windows has refused to boot - that did never happen before I installed the disk. But last time a Ctrl-Alt-Del did fixed it. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 ------- Comment #35 from teheo@novell.com 2007-05-09 06:25 MST ------- Hmmm... I really don't have much idea how to proceed on this. Anyone? Ideas? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259696 teheo@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |WONTFIX ------- Comment #36 from teheo@novell.com 2007-06-07 02:32 MST ------- Resolving as WONTFIX for now. Please re-open if there is new lead. Sorry. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
participants (1)
-
bugzilla_noreply＠novell.com