https://bugzilla.novell.com/show_bug.cgi?id=255664 Summary: sound issues: alsa instable, high frequent noise Product: openSUSE 10.2 Version: Final Platform: 64bit OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai@novell.com ReportedBy: schunk.michael@googlemail.com QAContact: qa@suse.de Hy, aftzer my installation of opensuse 10.2 I encountered the following issues: #1 sound unstable when changening sound parameters via kmix sound disappears. Restarting the sound system with /etc/rc.d/alsasound restart, but sometimes the settings are gone #2 high frequent noise when playing sound when booting opensuse (cold start, computer was off for some hours) each sound that comes out of the speaker is underlayed by a high frequent noise. REstarting the sound system /etc/rc.d/alsasound restart does not help. Workoround: boot any other operating system (win xp, ubuntu linux, knoppix). In these OS, sound works fine and after booting one of those and then rebooting opensuse, the high frequent noise has gone (but sound is played only using the right speaker until I do some changes with kmix and restart alsasound. I have two opensuse installations on this pc, on test instance installed out of the box without additional updates, problems occur on both. system is a selfmade PC: athlon xp2 3800+. 2 GB RAM, asusm2npv-vm with nvidia GeForce 6150 GPU, NVIDIA nForce 430 MCP * Problem occur only with opensuse, not with ubuntu , win xp or knoppix * Any help is appreciated. Michael oscar:~ # uname -a Linux oscar 2.6.18.8-0.1-default #1 SMP Tue Mar 13 22:37:52 CET 2007 x86_64 x86_64 x86_64 GNU/Linux oscar:~ # lspci 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 04:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 04:08.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] (rev 02) oscar:~ # alsaconf -h ALSA configurator version 1.0.13 usage: alsaconf [options] -l|--legacy check only legacy non-isapnp cards -m|--modinfo read module descriptions instead of reading card db -s|--sound wav-file use the specified wav file as a test sound -u|--uid uid set the uid for the ALSA devices (default = 0) [obsoleted] -g|--gid gid set the gid for the ALSA devices (default = 0) [obsoleted] -d|--devmode mode set the permission for ALSA devices (default = 0666) [obs.] -r|--strict set strict device mode (equiv. with -g 17 -d 0660) [obsoleted] -L|--log file logging on the specified file (for debugging purpose only) -p|--probe card-name probe a legacy non-isapnp card and print module options -P|--listprobe list the supported legacy card modules -c|--config file specify the module config file -R|--resources list available DMA and IRQ resources with debug for legacy -h|--help what you're reading oscar:~ # alsaconf -R

...

...

...

...

Allocated dma channels: 2: floppy 4: cascade Allocated interrupt channels: CPU0 CPU1 0: 2140848 0 IO-APIC-edge timer 1: 6238 0 IO-APIC-edge i8042 6: 5 0 IO-APIC-edge floppy 8: 8335855 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-level acpi 14: 191676 0 IO-APIC-edge ide0 15: 76374 0 IO-APIC-edge ide1 50: 554557 0 IO-APIC-level HiSax, nvidia 201: 292128 0 IO-APIC-level libata, ehci_hcd:usb1 209: 41121 0 IO-APIC-level libata, ohci_hcd:usb2 217: 1226504 0 IO-APIC-level eth0 225: 9722 0 IO-APIC-level HDA Intel 233: 3 0 IO-APIC-level ohci1394 NMI: 231 105 LOC: 2140426 2140937 ERR: 0 MIS: 0 Valid DMA channels: 0 1 3 5 6 7 Valid IRQ channels: 2 3 4 5 7 10 11 12 13 oscar:~ # alsaconf -P opl3sa2 cs4236 cs4232 cs4231 es18xx es1688 sb16 sb8

-- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.