[Bug 812667] New: speaker volume is 0 after plugging out a headset

newer
[Bug 831490] New: utilities/byobu:...

older
[Bug 626297] New: MySQL warning:...

bugzilla_noreply＠novell.com

1 Apr 2013 1 Apr '13

09:11

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c0 Summary: speaker volume is 0 after plugging out a headset Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai@suse.com ReportedBy: roman@rm-karlstetter.de QAContact: qa-bugs@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:19.0) Gecko/20100101 Firefox/19.0 After I plug out my headset, I cannot hear anything on my laptop speakers. The reason for this seems to be the speaker volume, which is not reset after plugging out the headset. To workaround, I have to open a shell and use alsamixer, change soundcard and set speaker volume to 100% again, as kmix only shows pulseaudio controls. Reproducible: Always Steps to Reproduce: 1. Plug in headset, speaker volume is set to 0 (which is ok I think) 2. Plug out headset, speaker volume stays at 0 (should be reset to the value before, i.e. 100 %) # lspci | grep Audio 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) This happens on a Lenovo Thinkpad R61 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Show replies by date

bugzilla_noreply＠novell.com

2 Apr 2 Apr

13:15

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c1 Takashi Iwai changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |roman@rm-karlstetter.de --- Comment #1 from Takashi Iwai 2013-04-02 13:15:55 UTC --- There is an update of pulseaudio to 3.0 for openSUSE 12.3. Similar bugs have been fixed by that update. Did you already run the update? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

15:45

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c2 Roman Karlstetter changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|roman@rm-karlstetter.de | --- Comment #2 from Roman Karlstetter 2013-04-02 15:45:29 UTC --- Hi, yes, I applied the update. Before the update, the speaker volume was 0 after every restart, so it fixed that problem. But now I noticed the issues with my headphones. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

15:49

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c3 Takashi Iwai changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |roman@rm-karlstetter.de --- Comment #3 from Takashi Iwai 2013-04-02 15:49:27 UTC --- OK, then it's a new problem. Does the system detect the unplugging? For example, take alsa-info.sh output (run with --no-upload option) before and after unplugging the headphone, and attach them to bugzilla. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

16:02

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c4 Roman Karlstetter changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|roman.karlstetter@googlemai | |l.com | --- Comment #4 from Roman Karlstetter 2013-04-02 16:02:53 UTC --- Created an attachment (id=533108) --> (http://bugzilla.novell.com/attachment.cgi?id=533108) alsa-info.sh output I guess yes, the system detects the unplugging. At least in alsamixer, the master volume is reset to the previous volume after plugging out the headphones. I also added the alsa-info.sh output. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

16:03

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c5 --- Comment #5 from Roman Karlstetter 2013-04-02 16:03:43 UTC --- Created an attachment (id=533109) --> (http://bugzilla.novell.com/attachment.cgi?id=533109) alsa-info.sh output after plugging out -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

12 Apr 12 Apr

15:20

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c6 Takashi Iwai changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |roman.karlstetter@googlemai | |l.com --- Comment #6 from Takashi Iwai 2013-04-12 15:20:03 UTC --- Thanks. There is really no difference between them, especially "Headphone Jack" control still shows it being plugged. It means that the jack detection doesn't work well on your machine by some reason. For verifying it, please try the following: - Install alsa-tools.rpm if not installed yet - Run hda-verb program as root like: hda-verb /dev/snd/hwC0D0 0x11 GET_PIN_SENSE 0 and see whether the output changes when you plug and unplug the headphone jack. - If it doesn't change the value reliably, try to run hda-verb /dev/snd/hwC0D0 0x11 SET_PIN_SENSE 0 before each execution of GET_PIN_SENSE above. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

18:18

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c7 Roman Karlstetter changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|roman.karlstetter@googlemai | |l.com | --- Comment #7 from Roman Karlstetter 2013-04-12 18:18:18 UTC --- Ok, there is a difference, this works reliably. when plugged in, I get: # hda-verb /dev/snd/hwC0D0 0x11 GET_PIN_SENSE 0 nid = 0x11, verb = 0xf09, param = 0x0 value = 0xffffffff plugged out, I get # hda-verb /dev/snd/hwC0D0 0x11 GET_PIN_SENSE 0 nid = 0x11, verb = 0xf09, param = 0x0 value = 0x7fffffff This changes as soon as I plug in/out my headphones, so this seems to work. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

13 Apr 13 Apr

09:12

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c8 --- Comment #8 from Takashi Iwai 2013-04-13 09:12:03 UTC --- Thanks. Then could you check again alsa-info.sh output after unplugging, especially whether "Headphone Jack" control (control.18 in alsactl section) shows "false"? If it still shows "true", it's the reason why the speaker isn't unmuted by PulseAudio. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

20:19

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c9 --- Comment #9 from Roman Karlstetter 2013-04-13 20:19:20 UTC --- Ok, now I see a difference in the output. Don't ask me why these were identical the first time (did I rename the wrong files, did I plug into the wrong jack...)! Should I upload the output again? Or is it enough that you know that they are different? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

16 Apr 16 Apr

15:24

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c10 Takashi Iwai changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |roman.karlstetter@googlemai | |l.com --- Comment #10 from Takashi Iwai 2013-04-16 15:24:39 UTC --- Yes, it'd be better to have the different outputs. At least, it's interesting whether the speaker is still muted even if the headphone jack control indicates false. Another debugging point is to check whether the unsolicited events are properly invoked at the plugging/unplugging. Try the following as root: - Run the command below echo 1 > /sys/kernel/debug/tracing/events/hda/hda_unsol_event/enable - Plug the headphone - Check the output of /sys/kernel/debug/tracing/trace It'll show a event if the hardware works properly. - Check the unplug event as well. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

16:28

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c11 --- Comment #11 from Roman Karlstetter 2013-04-16 16:28:21 UTC --- Created an attachment (id=535382) --> (http://bugzilla.novell.com/attachment.cgi?id=535382) alsa-info.sh output with no headset plugged in -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

16:29

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c12 Roman Karlstetter changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|roman.karlstetter@googlemai | |l.com | --- Comment #12 from Roman Karlstetter 2013-04-16 16:29:38 UTC --- Created an attachment (id=535383) --> (http://bugzilla.novell.com/attachment.cgi?id=535383) alsa-info.sh output with headphones plugged in -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

16:35

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c13 --- Comment #13 from Roman Karlstetter 2013-04-16 16:35:13 UTC --- And also cat /sys/kernel/debug/tracing/trace shows some events, after plugin in and out the headphones.

...

cat /sys/kernel/debug/tracing/trace # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | <idle>-0 [000] d.h3 5242.024494: hda_unsol_event: [0] res=5100001, res_ex=10 <idle>-0 [001] d.h3 5254.143822: hda_unsol_event: [0] res=5100000, res_ex=10

-- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

28 May 28 May

07:17

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c14 --- Comment #14 from Roman Karlstetter 2013-05-28 07:17:19 UTC --- It seems to be related to pulseaudio. When I stop the pulseaudio process (via yast or ksysguard), the volume stays at the same level. When I start it again, the problem reappears again. Perhaps it's also "just" a pulseaudio-config issue, but I don't know which files to look into. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

07:54

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c15 --- Comment #15 from Roman Karlstetter 2013-05-28 07:54:43 UTC --- Ok, I think I found the problem. I remembered that I have changed something in a config file and searched for it. In the file /etc/pulse/default.pa I changed the line load-module module-udev-detect to load-module module-udev-detect ignore_dB=yes This fixes the problem that I don't hear anything for volumes from 0 to 65% (and above that it get's very loud very fast). But adding ignore_dB=yes to this line introduces this bug. I hope that helps. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

31 May 31 May

13:40

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c16 --- Comment #16 from Takashi Iwai 2013-05-31 13:40:01 UTC --- Thanks, it's a good finding. The volume problem without ignore_dB=yes might be an issue that the codec reports some weird dB range. We can track in a different bug entry if needed. (Or, you can test 3.9.4 or later stable kernel from OBS Kernel:stable repo. There's been many rewrites regarding HD-audio in 3.9 kernel, and dB issues might have been fixed there.) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

15:27

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c17 --- Comment #17 from Roman Karlstetter 2013-05-31 15:27:14 UTC --- As this my main (and only :)) computer where I could test it, I prefer not switching the repository for the kernel. Updating pulseaudio however is something that I could do (if there is the chance that it gets fixed)... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

15:33

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c18 --- Comment #18 from Takashi Iwai 2013-05-31 15:33:53 UTC --- You don't have to switch repository. Just fetch the kernel rpm and install it like rpm -ivh kernel-desktop-xxx.rpm --nodeps --oldpackage Then you'll have multiple choices in the GRUB boot menu, which kernel to boot. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

9 Jun 9 Jun

20:44

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c19 --- Comment #19 from Roman Karlstetter 2013-06-09 14:44:51 UTC --- I have installed the latest version (3.9.4-1.g51bf0ff-desktop) from OBS Kernel:stable repo. (I didn't know that installing different kernel versions in parallel is that easy: http://doc.opensuse.org/documentation/html/openSUSE/opensuse-tuning/cha.tuni...) With this kernel, I can remove the "ignore_dB=yes" option. And then everything works perfectly :) Thanks -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

bugzilla_noreply＠novell.com

26 Jul 26 Jul

09:15

New subject: [Bug 812667] speaker volume is 0 after plugging out a headset

https://bugzilla.novell.com/show_bug.cgi?id=812667 https://bugzilla.novell.com/show_bug.cgi?id=812667#c20 Takashi Iwai changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED --- Comment #20 from Takashi Iwai 2013-07-26 09:15:55 UTC --- OK, let's close as fixed in the later kernel :) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

3933

Age (days ago)

4049

Last active (days ago)

List overview

Download

20 comments

1 participants

participants (1)

bugzilla_noreply＠novell.com

[Bug 812667] New: speaker volume is 0 after plugging out a headset

tags

participants (1)