https://bugzilla.novell.com/show_bug.cgi?id=293052 Summary: # could not convert 'ifcfg-eth-id-00:00:87:e2:c7:b8': file 'ifcfg-eth0' already exists Product: openSUSE 10.3 Version: Alpha 6 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: zoz@novell.com ReportedBy: schwab@novell.com QAContact: qa@suse.de Found By: --- # could not convert 'ifcfg-eth-id-00:00:87:e2:c7:b8': file 'ifcfg-eth0' already exists Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done Waiting for mandatory devices: eth-id-00:00:87:e2:c7:b8 eth0 __NSC__ 20 19 17 16 15 14 13 11 10 9 8 6 5 4 3 2 0 eth-id-00:00:87:e2:c7:b8 No interface found failed eth0 device: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev ff) eth0 DHCP client NOT running eth0 is down failed eth0 interface could not be set up until now failed Setting up service network . . . . . . . . . . . . . . failed # ip ad 1: lo: mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:00:87:e2:c7:b8 brd ff:ff:ff:ff:ff:ff 3: eth1: mtu 1500 qdisc noop qlen 1000 link/ether 00:00:87:e2:c7:b9 brd ff:ff:ff:ff:ff:ff 4: eth2: mtu 1500 qdisc noop qlen 1000 link/ether 00:00:87:12:b4:dc brd ff:ff:ff:ff:ff:ff # cat /etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='dhcp' STARTMODE='onboot' -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.