https://bugzilla.novell.com/show_bug.cgi?id=398242 User quentin.jackson@exclamation.co.nz added comment https://bugzilla.novell.com/show_bug.cgi?id=398242#c1 Summary: Hotplug of USB NTFS disk causes mount error Product: openSUSE 11.0 Version: RC 1 Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Hotplug AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: quentin.jackson@exclamation.co.nz QAContact: qa@suse.de Found By: Customer When plugging in an ntfs drive which mounts fine under opensuse 10.3, you are first presented with the usual detection of disk dialog then when clicking on the open folder option you get an error as below: Error - Konqueror mount: wrong fs type, bad option, bad superblock on /dev/sdf1 missing codepage or helper program, or other error in some cases useful info is found in syslog - try dmesg |tail or so Relevant output of DMESG: usb 5-4: new high speed USB device using ehci_hcd and address 3 usb 5-4: configuration #1 chosen from 1 choice usb 5-4: New USB device found, idVendor=13fd, idProduct=1650 usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-4: Product: ST9120823AS usb 5-4: Manufacturer: Initio usb 5-4: SerialNumber: 0010101650000DB8W Initializing USB Mass Storage driver... scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 8:0:0:0: Direct-Access Initio ST9120823AS 3.01 PQ: 0 ANSI: 0 sd 8:0:0:0: [sdf] 234441648 512-byte hardware sectors (120034 MB) sd 8:0:0:0: [sdf] Write Protect is off sd 8:0:0:0: [sdf] Mode Sense: 00 00 00 00 sd 8:0:0:0: [sdf] Assuming drive cache: write through sd 8:0:0:0: [sdf] 234441648 512-byte hardware sectors (120034 MB) sd 8:0:0:0: [sdf] Write Protect is off sd 8:0:0:0: [sdf] Mode Sense: 00 00 00 00 sd 8:0:0:0: [sdf] Assuming drive cache: write through sdf: sdf1 sd 8:0:0:0: [sdf] Attached SCSI disk sd 8:0:0:0: Attached scsi generic sg6 type 0 usb-storage: device scan complete NTFS driver 2.1.29 [Flags: R/W MODULE]. NTFS-fs error (device sdf1): parse_options(): Unrecognized mount option locale. NTFS-fs warning (device sdf1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel. NTFS-fs error (device sdf1): parse_options(): Unrecognized mount option locale. NTFS-fs warning (device sdf1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel. When you click OK to this message you cannot see the files in konqueror and refreshing the window brings back the same message. Typing mount reveals that nothing is in fact mounted and mounting the drive as root via mount /dev/sdf1 /home/username/directory mounts fine and all the data can be read. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.