Comment # 2
on bug 937065
from Achim Gratz
I�can only see the addition of "enable mode7" to the ntp.conf template. The
other bugs are still present, in particular I still need to restart the ntpd in
order to get all configured server lines to register:
Gertrud:~ # ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
+fritz.box 212.227.158.163 3 u 54 64 17 0.358 0.164 0.367
*ntp1.sul.t-onli 172.20.96.196 2 u 53 64 17 29.435 -2.235 0.367
Gertrud:~ # service ntpd restart
Gertrud:~ # ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*fritz.box 212.227.158.163 3 u 1 64 1 0.301 0.036 0.000
ntp1.sul.t-onli .INIT. 16 u - 64 0 0.000 0.000 0.000
Gertrud:~ # service ntpd restart
Gertrud:~ # ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*fritz.box 212.227.158.163 3 u 1 64 1 0.904 0.273 0.000
ntp1.sul.t-onli .INIT. 16 u - 64 0 0.000 0.000 0.000
cse-server.com 131.188.3.221 2 u 1 64 1 24.461 0.266 0.000
Gertrud:~ # service ntpd restart
Gertrud:~ # ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*fritz.box 212.227.158.163 3 u - 64 1 0.819 0.247 0.000
ntp1.sul.t-onli .INIT. 16 u - 64 0 0.000 0.000 0.000
cse-server.com 131.188.3.221 2 u - 64 1 24.112 0.033 0.000
thw23.de .INIT. 16 u - 64 0 0.000 0.000 0.000
Gertrud:~ # service ntpd restart
Gertrud:~ # ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*fritz.box 212.227.158.163 3 u - 64 1 1.511 0.604 0.000
ntp1.sul.t-onli 172.20.96.196 2 u - 64 1 29.672 -1.490 0.000
cse-server.com 131.188.3.221 2 u - 64 1 24.897 0.163 0.000
thw23.de 52.239.121.49 3 u - 64 1 44.950 -6.397 0.000
s1.vlns.de .INIT. 16 u - 64 0 0.000 0.000 0.000
Gertrud:~ # service ntpd restart
Gertrud:~ # ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*fritz.box 212.227.158.163 3 u - 64 1 0.467 0.128 0.000
ntp1.sul.t-onli .INIT. 16 u - 64 0 0.000 0.000 0.000
cse-server.com .INIT. 16 u - 64 0 0.000 0.000 0.000
thw23.de .INIT. 16 u - 64 0 0.000 0.000 0.000
s1.vlns.de .INIT. 16 u - 64 0 0.000 0.000 0.000
k01.i87b.de .INIT. 16 u - 64 0 0.000 0.000 0.000
Gertrud:~ # service ntpd restart
Gertrud:~ # ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*fritz.box 212.227.158.163 3 u - 64 1 1.438 0.707 0.000
ntp1.sul.t-onli .INIT. 16 u - 64 0 0.000 0.000 0.000
cse-server.com 131.188.3.221 2 u - 64 1 25.034 0.741 0.000
thw23.de 52.239.121.49 3 u - 64 1 44.889 -5.962 0.000
s1.vlns.de 161.62.157.173 3 u - 64 1 32.129 -1.153 0.000
k01.i87b.de .INIT. 16 u - 64 0 0.000 0.000 0.000
(I have not yet checked what pool statements do, that will have to wait until
the weekend at least.)