(In reply to Takashi Iwai from comment #19) > (In reply to Markos Chandras from comment #18) > > (In reply to Takashi Iwai from comment #17) > > > Also, another thing to be helpful is to check whether the direct S4 also > > > shows the same problem. Try like > > > echo -n disk > /sys/power/state > > > > > > This will trigger S4 but without systemd hooks. Then you'll have to choose > > > the right kernel in GRUB at resuming, instead of the automatic boot. > > > > > > I guess this should still show the problem, but just to be sure. > > > > > > Once when this is confirmed, you can try the test method in pm_test. For > > > example, > > > echo -n freezer > /sys/power/pm_test > > > will test only the freezer and resumes. You can see the available test > > > methods by "cat /sys/power/pm_test". More detailed instruction is found in > > > /usr/src/linux/Documentation/power/basic-pm-debugging.txt. > > > > Hi, > > > > I have the same problem on TW even with the latest 4.4.3 kernel (maybe > > update the title?) but on a different hardware (Dell Latitude E7450). I > > tried your direct S4 suggestion and it worked 2 out of 2. Certainly not a > > definitive result but good enough I suppose. I am not clearing up the > > needinfo flag because this is different hardware than the original report. > > Are your *user space* also TW or Leap? Or is it openSUSE 13.2? > If the direct S4 works, it means that the problem isn't in the kernel. Or > it's a user-mode S4 that hasn't been tested (and possibly broken) on recent > kernels. Yes the entire system is TW. > > In anyway, check whether suspend and pm-utils packages are installed on your > system. If yes, kill them. None of them is installed