November 2007 - openSUSE Bugs - openSUSE Mailing Lists

[Bug 341647] New: mounted nfs share does not show up after reconnect with k network manager
by bugzilla_noreply＠novell.com 23 Mar '09

23 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=341647 Summary: mounted nfs share does not show up after reconnect with k network manager Product: openSUSE 10.3 Version: Final Platform: 32bit OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: reitenbach(a)rapideye.de QAContact: qa(a)suse.de Found By: --- when I login into the notebook, networkmanager enabled, and then open a konsole and enter mount, the nfs share is shown. When I then reconnect the network via knetworkmanager, then when it is ready, the mounted share is not shown anymore in the output of hte mount command. Well, it is still mounted where it was, and still listed in /proc/mounts, but not in /etc/mtab nor does it show up in the output of df. Expected behaviour: as long as the nfs share is mounted, it should show up in the mount command, and in df and in /etc/mtab, as all the other filesystems do. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 15

[Bug 334811] New: kweather refuses to work with proxy
by bugzilla_noreply＠novell.com 20 Mar '09

20 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=334811 Summary: kweather refuses to work with proxy Product: openSUSE 10.3 Version: Final Platform: x86 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: dieter.jurzitza(a)t-online.de QAContact: qa(a)suse.de Found By: --- When installing kdetoys and trying to use kweather, everything is fine with openSUSE 10.2. However, on openSUSE 10.3 kweather refuses to work though the proxy entries in /etc/sysconfig/proxy are identical and the network interface is not hindered by any firewall. No station is being found at all. Using the old version of kdetoys from openSUSE 10.2 does not work either, so I assume there is some bug with the proxy - configuration. If you enter runlevel 3 and set things manually: export HTTP_PROXY="<PROXY>:<PORTNUMBER>" and do a startx afterwards, kweatherservice works fine. Must be some basic configuration issue. Thank you for taking care -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 7

[Bug 298809] New: kde / konqueror not configured after installation
by bugzilla_noreply＠novell.com 20 Mar '09

20 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=298809 Summary: kde / konqueror not configured after installation Product: openSUSE 10.3 Version: Beta 1 Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: robin.knapp(a)fujitsu-siemens.com QAContact: qa(a)suse.de Found By: --- During installation I configured a proxy. This was successful - the environment variables are set properly. But to use this proxy after first login in KDE, you have to go to kde/konqueror's proxy settings: - "Use preset proxy environment variables" is already checked (which is correct). -> You have to click on "Setup..." and then "Auto Detect" to fill out the variables, otherwise proxy will not work. This should be done automatically on first start (or preconfigured in default configuration -> kioslaverc) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 3

[Bug 331569] New: Kickoff doesn't show Logout, Shutdown, Suspend when using GDM
by bugzilla_noreply＠novell.com 20 Mar '09

20 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=331569 Summary: Kickoff doesn't show Logout, Shutdown, Suspend when using GDM Product: openSUSE 10.3 Version: Final Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Minor Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: stanaland(a)gmail.com QAContact: qa(a)suse.de Found By: --- If using GDM instead of KDM as the login manager, Kickoff loses all "Leave" options, except "Logout" and "Lock." -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 10

[Bug 343792] New: Some parts of KDE Control Center are missing a proper Czech translation.
by bugzilla_noreply＠novell.com 20 Mar '09

20 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=343792 Summary: Some parts of KDE Control Center are missing a proper Czech translation. Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: Linux Status: NEW Severity: Minor Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: vmarsik(a)novell.com QAContact: qa(a)suse.de Found By: System Test Some parts of KDE Control Center are missing a proper Czech translation. These are (in Czech) : - KDE Ovladaci centrum / Vzhled a motivy / GTK Styles and fonts (neni prelozen ani nazev, ani vlastni zalozka s nastavenim) - KDE Ovladaci centrum / Bezpecnost a soukromi / Soukromi - jednou pouziva "Cache", jednou "Kes" - KDE Ovladaci centrum / Internet a sit / Sdileni souboru - karta ma necitelne zobrazeny horni odstavec (dva radky orezane do ramecku velikosti jednoho radku), zadne viditelne ovladaci prvky nejsou aktivni - KDE Ovladaci centrum / Internet a sit / Sparovana Bluetooth zarizeni - karta v anglictine - KDE Ovladaci centrum / Komponenty KDE / Vyber komponent - nazvy a popisy jednotlivych komponent nejsou prelozeny - KDE Ovladaci centrum / Komponenty KDE / Vyhledavani v pocitaci - neprelozeno - KDE Ovladaci centrum / Komponenty KDE / Zdroje KDE - defaultni zdroj 'resource' ma typ 'file' - neprelozeno - KDE Ovladaci centrum / Mistni zvyklosti a zpristupneni / Rozvrzeni klavesnice / Moznosti xkb / Moznosti - neprelozeno - KDE Ovladaci centrum / Mistni zvyklosti a zpristupneni / Vstupni cinnosti - neprelozeny Akce a Komentare, krom toho misto "Vstupni cinnosti" doporucuju pojmenovat treba "Klavesove zkratky" - KDE Ovladaci centrum / Periferie / Obrazovka / Velikost a konfigurace - anglicka hlaska, ze RandR v. >1.2 zatim nema moznosti konfigurace -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 6

[Bug 230731] New: after deleting DVD shipped openoffice package, the shortcut for this application assigned in menu aditor under kde remained occupied (although the program was deleted!)
by bugzilla_noreply＠novell.com 20 Mar '09

20 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=230731 Summary: after deleting DVD shipped openoffice package, the shortcut for this application assigned in menu aditor under kde remained occupied (although the program was deleted!) Product: openSUSE 10.2 Version: Final Platform: 32bit OS/Version: SuSE Other Status: NEW Severity: Enhancement Priority: P5 - None Component: KDE AssignedTo: kde-maintainers(a)suse.de ReportedBy: jan.sekal(a)volny.cz QAContact: qa(a)suse.de How to reproduce this bug: 1. perform NEW INSTALLATION of suse 10.2 final, under kde menu editor assign a shortcut for open office suite (Win F3 in my case) 2. start yast2 and software management, install rpm-python, python-elementree and python-gtk (required by smart package manager) 3. install smart-0.49.1-40.guru.suse102.i686.rpm, smart-gui-0.49.1-40.guru.suse102.i686.rpm 4. start smart package manager, press CTRL F, write openoffice, press enter 5. click on openoffice-org (press ok, perform changes, ok again - this deletes the whole open office) (under yast2, deleting of openoffice is inconcevably complicated) 6. try to assign shortcut Win F3 to another application - you will not be allowed to do so, because KDE does not take into account, that openoffice has been deleted. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 4

[Bug 257664] New: Wireless networking with intel wlan broken since latest kernel update
by bugzilla_noreply＠novell.com 20 Mar '09

20 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=257664 Summary: Wireless networking with intel wlan broken since latest kernel update Product: openSUSE 10.2 Version: Final Platform: x86 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: admin(a)eregion.de QAContact: qa(a)suse.de since the lastest kernel update, wpa-encrypted networking with an intel ipw3945 collapses randomly, with the following in dmesg, and "no carrier" in the status of the interface: TKIP: ICV error detected: STA=00:0f:b5:37:17:4e TKIP: ICV error detected: STA=00:0f:b5:37:17:4e TKIP: ICV error detected: STA=00:0f:b5:37:17:4e TKIP: ICV error detected: STA=00:0f:b5:37:17:4e TKIP: ICV error detected: STA=00:0f:b5:37:17:4e TKIP: ICV error detected: STA=00:0f:b5:37:17:4e TKIP: ICV error detected: STA=00:0f:b5:37:17:4e N/A: Michael MIC verification failed for MSDU from 00:0f:b5:37:17:4e keyidx=0 eth1: MSDU decryption/MIC verification failed (SA=00:0f:b5:37:17:4e keyidx=0) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.

1 34

[Bug 331060] New: updater should show the current version for upgrades, not just the candidate version
by bugzilla_noreply＠novell.com 20 Mar '09

20 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=331060 Summary: updater should show the current version for upgrades, not just the candidate version Product: openSUSE 10.2 Version: Final Platform: x86 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: libzypp AssignedTo: tgoettlicher(a)novell.com ReportedBy: logixoul(a)gmail.com QAContact: kkaempf(a)novell.com Found By: --- The qt updater applet shows only the candidate version for any given upgrade. It should also show the currently installed version. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 9

[Bug 285482] New: 'verify installed package dependencies' functionality in YaST
by bugzilla_noreply＠novell.com 19 Mar '09

19 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=285482 Summary: 'verify installed package dependencies' functionality in YaST Product: openSUSE 10.3 Version: Alpha 5 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: ke(a)novell.com QAContact: jsrain(a)novell.com CC: gs(a)novell.com, sh(a)novell.com Found By: Documentation Fate 301178. Does not work as annnounced for me. Default installation (with GNOME). rpm -e --nodeps sax2 tcl Start yast -> software management -> Extra -> Verify System => Yast says dependencies are fine. File -> Quit. Surprisingly, YaST installs "sax2". Quit yast, whole procedure again. ... Quit and yast installs tcl. [I did not test with yast-ncurses.] -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 14

[Bug 334690] New: libcurl comes with too few certs
by bugzilla_noreply＠novell.com 19 Mar '09

19 Mar '09

https://bugzilla.novell.com/show_bug.cgi?id=334690 Summary: libcurl comes with too few certs Product: openSUSE 10.3 Version: Final Platform: All OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening(a)forge.provo.novell.com ReportedBy: tom.horsley(a)att.net QAContact: qa(a)suse.de Found By: --- The /usr/share/curl/curl-ca-bundle.crt file that ships with openSUSE (rpm curl-ca-bundle-7.16.4-16) has a vastly limited subset of certs compared to firefox (for example). Since zypper uses libcurl for https access, this means that repos accessible only via https are likely not accessible without resorting to fiddling with the certs file. For example, the equivalent file on a fedora 7 box is found at /etc/pki/tls/certs/ca-bundle.crt and is 441017 bytes. The /usr/share/curl/curl-ca-bundle.crt file is only 238102 bytes. Copying the fedora 7 certs to my opensuse box did indeed allow me to access an https repo, but that is way too obscure for most folks to figure out. It seems reasonable to expect all the tools that talk https to have access to the same set of certs when they all come on the same linux distribution. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

1 13