That's great, Andreas, but you are specifying a "minimal" install, so perhaps you shouldn't be doing anything with graphics in the first place. If you actually want graphics, you should change this to the default or full install (I think). <base>Minimal</base> <kernel>kernel-default</kernel> What happens if you leave out the entire X11 section in the XML file when you do a minimal install? -- Charlie -----Original Message----- From: rab2003@web.de [mailto:rab2003@web.de] Sent: Tuesday, January 11, 2005 7:53 AM To: suse-autoinstall@suse.com Subject: Re: [suse-autoinstall] AutoYaST-Problem after first reboot Hi, Problem is fixed! Package "SaX2-gui" was missing in installation. Andreas schrieb am 11.01.05 10:43:13:

Hi,

I try it in english, hope its ok :-)

I have a problem with my AutoYaST-Installation. After the first reboot

yast ist starting and everything work fine. After the post-install-script (the last step) yast is starting with "Yast Initialisierung". In the upper right corner of the screen appears the "S" an after a CR on the next line "aX>" appears (the word "SaX>" is written over the blue screen of yast). At this point the installation the stops. I've tried to type "exit" and after 2 times typing "exit" and pressing ESC the installation is going on with the next step "Bildschirmeinstellungen". The rest of the autoinstallation is working and after 1 minute I have a login-prompt.

How can I fix the problem with sax?

I have tried to add some parameters to the control-file, but it doesn't

work ( Section <X11>).

------------ bootparameter: autoyast=nfs://<IP-ADDRESS>/autoyast/autoinst.xml

install=nfs://<IP-ADDRESS>/cdrom insmod=ata_piix textmode=1

control-file: <?xml version="1.0"?>

"/usr/share/YaST2/include/autoinstall/profile.dtd">

<profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns"> <configure> <inetd> 0 <listentry> <changed config:type="boolean">true</changed> <enabled config:type="boolean">true</enabled> <group></group> <iid>1:/etc/inetd.conf</iid> <max></max> <protocol>tcp</protocol> <server>internal</server> <service>echo</service> stream <user>root</user> <wait config:type="boolean">false</wait> </listentry> <listentry> <changed config:type="boolean">true</changed> <enabled config:type="boolean">true</enabled> <group></group> <iid>21:/etc/inetd.conf</iid> <max></max> <protocol>tcp</protocol> <server>/usr/sbin/tcpd</server> in.ftpd <service>ftp</service> stream <user>root</user> <wait config:type="boolean">false</wait> </listentry> <listentry> <changed config:type="boolean">true</changed> <enabled config:type="boolean">true</enabled> <group></group> <iid>26:/etc/inetd.conf</iid> <max></max> <protocol>tcp</protocol> <server>/usr/sbin/tcpd</server> in.telnetd <service>telnet</service> stream <user>root</user> <wait config:type="boolean">false</wait> </listentry> <listentry> <changed config:type="boolean">true</changed> <enabled config:type="boolean">true</enabled> <group></group> <iid>32:/etc/inetd.conf</iid> <max></max> <protocol>tcp</protocol> <server>/usr/sbin/tcpd</server> in.rshd -L <service>shell</service> stream <user>root</user> <wait config:type="boolean">false</wait> </listentry> <listentry> <changed config:type="boolean">true</changed> <enabled config:type="boolean">true</enabled> <group></group> <iid>39:/etc/inetd.conf</iid> <max></max> <protocol>tcp</protocol> <server>/usr/sbin/tcpd</server> in.rlogind <service>login</service> stream <user>root</user> <wait config:type="boolean">false</wait> </listentry> inetd 1 <listentry>inetd</listentry> </inetd> <networking> <dns> false false <domain>local</domain> <hostname>MP00000</hostname> </dns> <interfaces config:type="list"> <interface> <bootproto>static</bootproto> <broadcast>192.168.1.225</broadcast> <device>eth0</device> <ipaddr>192.168.1.100</ipaddr> <netmask>255.255.255.0</netmask> <network>192.168.1.0</network> <startmode>onboot</startmode> </interface> </interfaces> <modules config:type="list"> </modules> <routing> false </routing> </networking> <runlevels> <default>3</default> <services config:type="list" > <service> cups 3 5 2 3 5 </service> <service> nmb 3 5 2 3 5 </service> <service> smb 3 5 2 3 5 </service> <service> inetd 3 5 2 3 5 </service> </services> </runlevels> <x11> false 16 <monitor> <display> 60 60 31 30 </display> 800x600@60HZ Unknown </monitor> <resolution>800x600</resolution> false </x11> <scripts> <chroot-scripts config:type="list"/> <post-scripts config:type="list"> <script> <filename>post_install.sh</filename> <interpreter>shell</interpreter> <source> > /root/install.log sleep 10

echo "Uninstall SuSEFirewall2" >> /root/install.log rcSuSEfirewall2 stop rpm -e --nodeps SuSEfirewall2

echo "Setting up Network-Device with: ifconfig eth0 192.168.1.100" >> /root/install.log ifconfig eth0 192.168.1.100

echo "---" >> /root/install.log ifconfig eth0 >> /root/install.log echo "---" >> /root/install.log

echo "Mounting NFS-Server for next Step of Installation" >> /root/install.log mount -t nfs 192.168.1.11:/inst82/pub /mnt

echo "Changing Directory to /" >> /root/install.log cd /

echo "Copying User-Setup-Script" >> /root/install.log cp /mnt/files/newusers /usr/sbin/

echo "Copying CAPI Setup-Script" >> /root/install.log cp /mnt/Scripts/capisetup /root/

echo "Extracting UPS-Software" >> /root/install.log tar xvzf /mnt/online_usv/usv.tgz

echo "Running UnInstall-Script" >> /root/install.log /usr/ups/usv-install uninstall

echo "Copying newuser-Script an man-Page" >> /root/install.log cp /mnt/sys/newusers /usr/sbin/newusers cp /mnt/sys/newusers.8.gz /usr/share/man/man8/newusers.8.gz 2>&1 >> /root/install.log

echo "Installation-Schritt 1 abgeschlossen, bitte Schritt 2 (Systemkonfiguration) manuell ausführen" >> /root/install.log ]]> </source> </script> </post-scripts> <pre-scripts config:type="list"/> </scripts> <sysconfig config:type="list"> KBD_NUMLOCK keyboard yes KEYTABLE keyboard loesung-2.map.gz ISDNLOG_START isdn/config no </sysconfig> <security> ignore </security> </configure> <install> <report> <messages> <show>true</show> <timeout>10</timeout> <log>true</log> </messages> <errors> <show>true</show> <timeout>10</timeout> <log>true</log> </errors> <warnings> <show>true</show> <timeout>10</timeout> <log>true</log> </warnings> </report> <bootloader> <location>mbr</location> </bootloader> <general> <clock> <hwclock>localtime</hwclock> <timezone>GMT</timezone> </clock> <keyboard> <keymap>german</keymap> </keyboard> <language>de_DE</language> <mode> <confirm config:type="boolean">false</confirm> <forceboot config:type="boolean">false</forceboot> false <reboot config:type="boolean">false</reboot> </mode> <mouse> <id>ps0</id> <device>/dev/psaux</device> </mouse> </general> <partitioning config:type="list"> <drive> <device>/dev/sda</device> <partitions config:type="list"> <partition> <filesystem config:type="symbol">ext3</filesystem> <mount>/</mount> 1 <size>8gb</size> </partition> <partition> <mount>swap</mount> 2 <size>1gb</size> </partition> <partition> <filesystem config:type="symbol">ext3</filesystem> <mount>/usr/wws</mount> 3 <size>max</size> </partition> </partitions> <use>all</use> </drive> </partitioning> <software> <base>Minimal</base> <kernel>kernel-default</kernel> <packages config:type="list"> <package>xmodules</package> <package>filesystem</package> ...... ...... <package>python</package> <package>sfftobmp</package> <package>sox</package> <package>kernel-default-nongpl</package> </packages> </software> </install> </profile> ------------

Andreas

________________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193

-- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com

__________________________________________________________ Mit WEB.DE FreePhone mit hoechster Qualitaet ab 0 Ct./Min. weltweit telefonieren! http://freephone.web.de/?mc=021201 -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe@suse.com For additional commands, e-mail: suse-autoinstall-help@suse.com