on Monday 08 June 2009 Leonardo L. P. da Mata wrote:

This is another test that i'm doing, i'd like to use this feature:

<software> <image> http://10.10.0.162/image.sh true </image> </software>

But i'd like to store both the script and the image that will be used in the installation on the media DVD, the script_location tag may have device:///image.sh parameter??

yes, you can use device, like you can use it for the autoyast=.... parameter you can use file:///... too, then autoyast will fall back to the cdrom drive if it cant find it in the filesystem -- ciao, Uwe Gansert Uwe Gansert, Server Technologies Team SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Business: http://www.suse.de/~ug -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org

On Wed, Jul 15, 2009 at 12:10 PM, Uwe Gansert wrote:

on Tuesday 09 June 2009 Uwe Gansert wrote:

...

...

But i'd like to store both the script and the image that will be used in the installation on the media DVD, the script_location tag may have device:///image.sh parameter??

yes, you can use device, like you can use it for the autoyast=.... parameter you can use file:///... too, then autoyast will fall back to the cdrom drive if it cant find it in the filesystem

just for the archive, I did a test and that worked fine:

I created an ISO (based on a SLES11 but all RPM files deleted) with the following image files on it:

* image.sh * image_test.xml * suse-oem-preload.tar.bz2

and that worked with: autoyast=file:///image_test.xml

instead of using the file:// parameter, i've used the device:/// parameter. The machines where the system will be installed have the same configuration, so there's no concern about changing the device. my image.sh script has almost the same configuration.

and an image.sh like this:

mv /mnt/etc/fstab tmp mkdir /tmp/mnt mount /dev/sr0 /tmp/mnt tar xfj /tmp/mnt/suse-oem-preload.tar.bz2 -C /mnt 2>/dev/null mv /tmp/fstab /mnt/etc umount /tmp/mnt

the relevant part in the xml file is:

 <software>      <image>          file:///image.sh          true      </image>  </software>

that installed a SLES 11 system quite fine here You should add a working installation source at the end of the installation via "zypper as" and remove the "broken" on the the CD with "zypper rs"

-- ciao, Uwe Gansert

Uwe Gansert SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Business: http://www.suse.de/~ug

-- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org

I will keep updating the information. Thanks again. -- Leonardo Luiz Padovani da Mata barroca@gmail.com "May the force be with you, always" "Nerd Pride... eu tenho. Voce tem?" -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org

on Thursday 16 July 2009 Frank Steiner wrote:

...

How do i identify what's my dvdrom drive inside these scripts?

There should always be a link /dev/dvd pointing to the real device like /dev/sr0 or /dev/sr1 etc.

that's true for SLES11 AFAIK but not for SLES10 for example. I'm not sure when exactly that changed. If you boot from the CD/DVD, you can get the information from the /etc/install.inf too -- ciao, Uwe Gansert Uwe Gansert SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Business: http://www.suse.de/~ug -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org

Ok, i think i've finally found the problem. It's been a long time, but i guess it's ok to explain the problem. So, if i point the image to cd:///image.sh it should look for this file in the installation cd, but it doesn't . The problem is that the file include/autoinstall/io.ycp doesn't check if the cdrom is already mounted, and tries to mount it again, with an error. I've changed the file (attached to this email), to do a bind mount and it worked. To reproduce the error, try to use cd:///image.sh as a location of image file instead of file:/// or others. Thanks. On Thu, Jul 16, 2009 at 11:27 AM, Leonardo L. P. da Mata wrote:

On Thu, Jul 16, 2009 at 5:09 AM, Frank Steiner wrote:

...

Leonardo L. P. da Mata wrote

...

How do i identify what's my dvdrom drive inside these scripts?

There should always be a link /dev/dvd pointing to the real device like /dev/sr0 or /dev/sr1 etc.

The problem is that if I create an installation source from USB or HardDisk.

...

-- Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17           Phone: +49 89 2180-4049 80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049 * Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *

-- Leonardo Luiz Padovani da Mata barroca@gmail.com

"May the force be with you, always" "Nerd Pride... eu tenho. Voce tem?"

-- Leonardo Luiz Padovani da Mata barroca@gmail.com "May the force be with you, always" "Nerd Pride... eu tenho. Voce tem?"