hiya @all, since suse 9.2 prof. i get in trouble with netbootgrub. tftpd do his job well.. after loading the kernel and initrd via netbootgrub no decompression starts.. no failure message, just nothing happens... suse 9.0 works fine with netbootgrub.. i disabled the 'grubstuff' in dhcpd.conf and configure a 'fall back' to pxelinux and this works fine with suse 9.2.. how can i fix this problem to get a running netbootgrub with suse 9.2? the second problem i have: i would like to install suse 9.2 on a sata-drive but autoyast fails, because autoyast can't find /dev/sda for formatting.. with suse 9.0 works everything fine (sata = ide-support = /dev/hda)... any ideas? -- regards Martin Fischer BCC Business Communication Company GmbH Mittelweg 7 38106 Braunschweig Tel. 0800/2223733 Fax 0531/383-4385 Communication for Your Business
Am Montag, 13. Dezember 2004 11:43 schrieb Martin Fischer:
the second problem i have:
i would like to install suse 9.2 on a sata-drive but autoyast fails, because autoyast can't find /dev/sda for formatting..
with suse 9.0 works everything fine (sata = ide-support = /dev/hda)...
i fix this problem by myself :-)
first i had a size 'auto' and i've got the upper problem..
now i change to '64M' and this works fine...
it seems that autoyast won't like size 'auto' for boot-device..
<partition>
<crypt>twofish256</crypt>
<filesystem config:type="symbol">xfs</filesystem>
<format config:type="boolean">true</format>
SUSE appears to have some real issues with SCSI disks booted over a network. I've had exact same problem since mid summer and no answer. Just substitute PXE boot and our problems are identical. SG Martin Fischer wrote:
hiya @all,
since suse 9.2 prof. i get in trouble with netbootgrub. tftpd do his job well.. after loading the kernel and initrd via netbootgrub no decompression starts.. no failure message, just nothing happens...
suse 9.0 works fine with netbootgrub..
i disabled the 'grubstuff' in dhcpd.conf and configure a 'fall back' to pxelinux and this works fine with suse 9.2..
how can i fix this problem to get a running netbootgrub with suse 9.2?
the second problem i have:
i would like to install suse 9.2 on a sata-drive but autoyast fails, because autoyast can't find /dev/sda for formatting..
with suse 9.0 works everything fine (sata = ide-support = /dev/hda)...
any ideas?
-- Steve Glines voice: 978-952-6340 www.is-cs.com fax: 978-952-8524 145 Foster Street cell: 617-549-7274 Littleton MA 01460 I'm a complex person. I have a real and an imaginary part.
participants (2)
-
Martin Fischer
-
Steve Glines