Antwort: Re: [suse-autoinstall] Autoyast under SLES8 (my autoinst.xml in ASCII)

10 Jun 2003

      <?xml version="1.0"?>
<!DOCTYPE profile SYSTEM
"/usr/share/YaST2/include/autoinstall/profile.dtd">
<profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config
="http://www.suse.com/1.0/configns">
<install>
  <general>
    <language>en_US</language>
    <keyboard>
      <keymap>german</keymap>
    </keyboard>
    <clock>
      <timezone>Europe/Berlin</timezone>
      <hwclock>localtime</hwclock>
    </clock>
    <mouse>
      <id>00_ps2</id>
    </mouse>
    <mode>
      <confirm config:type="boolean">true</confirm>
      <forceboot config:type="boolean">false</forceboot>
      false
      <reboot config:type="boolean">true</reboot>
    </mode>
  </general>
  <init>
    <domain>mn.man.de</domain>
    <gateway>151.136.122.1</gateway>

<![CDATA[
#
# Don't remove the following line:
# start_linuxrc_conf
#
language: en_EN
keytable: de-lat1-nd
display color

instmode: nfs
server: 151.136.130.67
serverdir: /opt/export/install/sles8/i386/autoinstall
install: nfs://151.136.130.67/opt/export/install/sles8/i386/autoinstall

netdevice: eth0
hostip: 151.136.122.73
netmask: 255.255.254.0
gateway: 151.136.122.1
nameserver: 151.136.128.18
domain: mn.man.de
# end_linuxrc_conf
# Do not remove the above comment
#]]>

    <instmode>nfs</instmode>
    <ip>151.136.122.73</ip>
    <nameserver>151.136.128.18</nameserver>
    <netmask>255.255.254.0</netmask>
    file
    <server>151.136.130.67</server>
    <serverdir>/opt/export/install/sles8/i386/autoinstall</serverdir>
    <textmode config:type="boolean">false</textmode>
    <usedhcp config:type="boolean">false</usedhcp>
  </init>
  <bootloader>
    <activate config:type="boolean">false</activate>
    acpi=oldboot
    false
    <linear config:type="boolean">false</linear>
    <location>mbr</location>
  </bootloader>
  <partitioning config:type="list">
    <drive>
      <device>/dev/sda</device>
      <use>all</use>
      <initialize config:type="boolean">true</initialize>
      <partitions config:type="list">
        <partition>
          <filesystem config:type="symbol">ext2</filesystem>
          <format config:type="boolean">true</format>
          <mount>/boot</mount>
          131
          primary
          <size>50M</size>
        </partition>
        <partition>
          <filesystem config:type="symbol">swap</filesystem>
          <format config:type="boolean">true</format>
          <mount>swap</mount>
          131
          primary
          <size>auto</size>
        </partition>
        <partition>
          primary
          <size>16G</size>
          vg_system
        </partition>
        <partition>
          <size>16G</size>
        </partition>
        <partition>
          <size>16G</size>
        </partition>
        <partition>
          <size>16G</size>
        </partition>
        <partition>
          <size>16G</size>
        </partition>
        <partition>
          <size>16G</size>
        </partition>
        <partition>
          <size>16G</size>
        </partition>
        <partition>
          <size>16G</size>
        </partition>
        <partition>
          <size>max</size>
        </partition>
      </partitions>
    </drive>
  </partitioning>
  <lvm config:type="list">

      vg_system
      <pesize>4M</pesize>

        <lv>
          lv_root
          1G
          reiser
          /
        </lv>
        <lv>
          lv_usr
          2G
          reiser
          /usr
        </lv>
        <lv>
          lv_opt
          1G
          reiser
          /opt
        </lv>
        <lv>
          lv_var
          1G
          reiser
          /var
        </lv>
        <lv>
          lv_home
          512M
          reiser
          /home
        </lv>
        <lv>
          lv_tmp
          512M
          reiser
          /tmp
        </lv>

  </lvm>
  <report>
    <errors>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">10</timeout>
    </errors>
    <messages>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">10</timeout>
    </messages>
    <warnings>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">10</timeout>
    </warnings>
  </report>
  <software>
    <base>default</base>
  </software>
</install>
<configure>
  <network>
    <dns>
      false
      <hostname>mmicl006</hostname>
      mn.man.de
      <nameservers config:type="list">
        <nameserver>151.136.128.18</nameserver>
        <nameserver>151.136.192.18</nameserver>
        <nameserver>151.136.42.131</nameserver>
      </nameservers>
      <searchlist config:type="list">
        <search>mn.man.de</search>
        <search>mn-man.biz</search>
        <search>ed-man.biz</search>
      </searchlist>
    </dns>
    <interfaces config:type="list">
      <interface>
        <BOOTMODE>onboot</BOOTMODE>
        <BOOTPROTO>static</BOOTPROTO>
        <BROADCAST>151.136.123.255</BROADCAST>
        <IPADDR>151.136.122.73</IPADDR>
        <NETMASK>255.255.254.0</NETMASK>
        <NETWORK>151.136.122.0</NETWORK>
        <device>eth0</device>
        <module>bcm5700</module>
        <options></options>
      </interface>
      <interface>
        <BOOTMODE>onboot</BOOTMODE>
        <BOOTPROTO>static</BOOTPROTO>
        <BROADCAST>10.100.1.255</BROADCAST>
        <IPADDR>10.100.1.59</IPADDR>
        <NETMASK>255.255.255.0</NETMASK>
        <NETWORK>10.100.1.0</NETWORK>
        <device>eth1</device>
        <module>bcm5700</module>
        <options></options>
      </interface>
    </interfaces>
    <routing config:type="list">
      <route>
        <destination>default</destination>
        <device></device>
        <gateway>151.136.122.1</gateway>
        <netmask>0.0.0.0</netmask>
      </route>
    </routing>
  </network>
  <security>
    ignore
    no
    no
    <encryption>des</encryption>
    3
    yes
    60000
    101
    root
    yes
    yes
    99999
    7
    0
    5
    7
    yes
    secure
    nobody
    60000
    100
  </security>
  <sysconfig config:type="list">

      XNTPD_INITIAL_NTPDATE
      xntp
      ntp1.mn.man.de

  </sysconfig>
  <users config:type="list">
    <user>
      <username>root</username>
      <encrypted config:type="boolean">true</encrypted>
      IXu009/.msGNQ
    </user>
  </users>
  <x11>
    16
    true
    kdm
    true
    <monitor>
      <display>
        60
        86
        31
        55
      </display>
      TFT 1400FP
      DELL
    </monitor>
    <resolution>1024x768</resolution>
    true
  </x11>
</configure>
</profile>

Mit freundlichen Grüßen

Tobias Mucke

--------------------------------------------------------------------------------------------------

MAN Nutzfahrzeuge AG
Informationssysteme Organisation (I)
Dachauer Straße 667
D-80995 München

Tel.: +49 (0) 89 1580 5269
Mail-Adresse: Tobias_Mucke@mn.man.de
Internet-Adresse: http://www.man-trucks.com
--------------------------------------------------------------------------------------------------

                      Stefan Weigel                                                                                                     
                                            Kopie:                                                                                   
                                               Thema:    Re: [suse-autoinstall] Autoyast under SLES8                                    
                      10.06.2003 11:52                                                                                                  
                      Bitte antworten                                                                                                   
                      an sw                                                                                                             

Am Dienstag, 10. Juni 2003 08:17 schrieb Tobias_Mucke@mn.man.de:
...
Hi everybody,
I am using SLES8 and try to install several nodes with that SuSE release.
Unfortunately I experienced some strange phenomenons (beside that lvm
problem last week) and I am wondering about a few marginal problems.
1. How can I install straight forward the SuSE Patch CDs during the
initial
installation. I read that during a manuell installation that is possible
by
booting from the latest patch CD. Is that right and can this be done by
Autoyast?
If the SuSE Patch CD's contains only fresh RPM's, that it would be easy to
copy the update RPM's in your tree, delete the old packages from there, and

use create_package_descr to build the new descriptions.
...
2. How can I avoid the license agreement at the beginning of the
installation?
Have a look at:
http://lists2.suse.com/archive/suse-autoinstall/2003-Apr/0061.html
...
3. Why are the network devices not configured correctly at the end of the
installation? The first device eth0 is working, but eth1 doesn't get
configured. YaST2 says that none of the two interfaces are configured and
after a reboot eth0 remains also unconfigured.
Sorry, I don't have problems with this and can't help you with this point.
...
Since I am not sure that is my fault or a fault in my configuration, I
append my autoinst.xml.
During autoinstallation I am booting from the SuSE SLES8 CD. The files
info
and autoinst.xml are on a floppy. The CDs for installation are on a NFS
Server which was prepared like the SuSE docu described it for SLES8 and
UL.
Thanks for help again.
(See attached file: mmicl006_autoinst.xml) (See attached file:
mmicl006_info)
Mit freundlichen Grüßen
Tobias Mucke
---------------------------------------------------------------------------
...
-----------------------
MAN Nutzfahrzeuge AG
Informationssysteme Organisation (I)
Dachauer Straße 667
D-80995 München
Tel.: +49 (0) 89 1580 5269
Mail-Adresse: Tobias_Mucke@mn.man.de
Internet-Adresse: http://www.man-trucks.com
---------------------------------------------------------------------------
...
----------------------- This message and any attachments are confidential
and may be privileged or otherwise protected from disclosure. If you are
not the intended recipient, please telephone or email the sender and
delete
this message and any attachment from your system. If you are not the
intended recipient, you must not copy this message or attachment or
disclose the contents to any other person.
--

__________________________________________

 stefan weigel
 administration

 global linxs gmbh
 knowledge interaction
 romanstrasse 16
 80639 munich - germany
 www.global-linxs.com

 tel.: +49(0)89. 189 336- 61
 fax.: +49(0)89. 189 336- 99
 email: sw@global-linxs.com

__________________________________________

This message and any attachments are confidential and may be privileged or otherwise protected from disclosure. 
If you are not the intended recipient, please telephone or email the sender and delete this message and any attachment 
from your system. If you are not the intended recipient, you must not copy this message or attachment or disclose the 
contents to any other person.

Tobias_Mucke＠mn.man.de

tags

participants (1)