July 2006 - openSUSE Autoinstall - openSUSE Mailing Lists

Re: [suse-autoinstall] No IP
by Hans-Joachim Ehlers 20 Jul '06

20 Jul '06

I have had problem with fewer then 256 bytes. Like i said: Use and info file. For me it works perfectly. BTW: Is the bcm5700 the correct driver because i think the tg3 is the current one for broadcom ? What kind of network hardware are you using ? Hajo >>> "Michael Schulz" <problems(a)gmx.net> 20/07/2006 17:23 >>> >The boot command line might getting to long. Start using an info file. I think it can up to 256 characters >A simple test is a >cat /proc/cmdline >and verify that It this time I don't have a shell, or? >and a netwait of 5 should be enough. Maybe 300 is not even supported I tried also with 5. For me it's verry importent to solve this problem, but in the moment I don't have an Idea where I should begin. regards >hth >Hajo >>> "Michael Schulz" <problems(a)gmx.net> 20/07/2006 17:09 >>> I tried it with netwait=300 but it doesnt work. The last message whch i get is the following. Looking for a network server ........... ........... Automatic setup not possible there are my boot parameters kernel linux append initrd=initrd insmod=bcm5700 autoyast=nfs://10.10.10.248/srv/nfs/sles9-sp3/setup.xml install=nfs://10.10.10.248/srv/nfs/sles9-sp3/64bit netmask=255.255.248.0 hostip=10.10.10.247 netdevice=eth0 netwait=300 Have anybody an idea? Regards -- Echte DSL-Flatrate dauerhaft für 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com * Previous message: Michael Schulz: "Re: [suse-autoinstall] No IP" * Maybe in reply to: Michael Schulz: "[suse-autoinstall] No IP" * Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ] This archive was generated by hypermail 2.1.7 : Thu Jul 20 2006 - 17:14:49 CEST -- Echte DSL-Flatrate dauerhaft für 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl

1 0

Re: [suse-autoinstall] No IP
by Michael Schulz 20 Jul '06

20 Jul '06

>The boot command line might getting to long. Start using an info file. I think it can up to 256 characters >A simple test is a >cat /proc/cmdline >and verify that It this time I don't have a shell, or? >and a netwait of 5 should be enough. Maybe 300 is not even supported I tried also with 5. For me it's verry importent to solve this problem, but in the moment I don't have an Idea where I should begin. regards >hth >Hajo >>> "Michael Schulz" <problems(a)gmx.net> 20/07/2006 17:09 >>> I tried it with netwait=300 but it doesnt work. The last message whch i get is the following. Looking for a network server ........... ........... Automatic setup not possible there are my boot parameters kernel linux append initrd=initrd insmod=bcm5700 autoyast=nfs://10.10.10.248/srv/nfs/sles9-sp3/setup.xml install=nfs://10.10.10.248/srv/nfs/sles9-sp3/64bit netmask=255.255.248.0 hostip=10.10.10.247 netdevice=eth0 netwait=300 Have anybody an idea? Regards -- Echte DSL-Flatrate dauerhaft für 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com * Previous message: Michael Schulz: "Re: [suse-autoinstall] No IP" * Maybe in reply to: Michael Schulz: "[suse-autoinstall] No IP" * Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ] This archive was generated by hypermail 2.1.7 : Thu Jul 20 2006 - 17:14:49 CEST -- Echte DSL-Flatrate dauerhaft für 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl

1 0

Re: [suse-autoinstall] No IP
by Hans-Joachim Ehlers 20 Jul '06

20 Jul '06

The boot command line might getting to long. Start using an info file. A simple test is a cat /proc/cmdline and verify that and a netwait of 5 should be enough. Maybe 300 is not even supported hth Hajo >>> "Michael Schulz" <problems(a)gmx.net> 20/07/2006 17:09 >>> I tried it with netwait=300 but it doesnt work. The last message whch i get is the following. Looking for a network server ........... ........... Automatic setup not possible there are my boot parameters kernel linux append initrd=initrd insmod=bcm5700 autoyast=nfs://10.10.10.248/srv/nfs/sles9-sp3/setup.xml install=nfs://10.10.10.248/srv/nfs/sles9-sp3/64bit netmask=255.255.248.0 hostip=10.10.10.247 netdevice=eth0 netwait=300 Have anybody an idea? Regards -- Echte DSL-Flatrate dauerhaft für 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com

1 0

Re: [suse-autoinstall] No IP
by Michael Schulz 20 Jul '06

20 Jul '06

I tried it with netwait=300 but it doesnt work. The last message whch i get is the following. Looking for a network server ........... ........... Automatic setup not possible there are my boot parameters kernel linux append initrd=initrd insmod=bcm5700 autoyast=nfs://10.10.10.248/srv/nfs/sles9-sp3/setup.xml install=nfs://10.10.10.248/srv/nfs/sles9-sp3/64bit netmask=255.255.248.0 hostip=10.10.10.247 netdevice=eth0 netwait=300 Have anybody an idea? Regards -- Echte DSL-Flatrate dauerhaft für 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl

1 0

Re: [suse-autoinstall] No IP
by Hans-Joachim Ehlers 20 Jul '06

20 Jul '06

try as an boot option: netwait=5 Some nework adapter need some time for configuration hth Hajo >>> "Michael Schulz" <problems(a)gmx.net> 20/07/2006 16:27 >>> Hi I have the following problem, when my Autoyastclient try do connect to the NFS Server I get an errot that the server is not available and I will be switched in the manual mode. If I try to connect again with the same settings from there it works. How can I configure the client that it will be longer time try to connect the NFS-Server? Regards -- Echte DSL-Flatrate dauerhaft für 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com

1 0

No IP
by Michael Schulz 20 Jul '06

20 Jul '06

Hi I have the following problem, when my Autoyastclient try do connect to the NFS Server I get an errot that the server is not available and I will be switched in the manual mode. If I try to connect again with the same settings from there it works. How can I configure the client that it will be longer time try to connect the NFS-Server? Regards -- Echte DSL-Flatrate dauerhaft für 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl

1 0

Problem with the order of disks
by Michael Schulz 19 Jul '06

19 Jul '06

Hi List, I want to bring up an autoyast environment with SLES 9. The Systems have a local Raid and "SAN" Disk. Now i have the following Problem, the installation setup will find the SAN Disk at first. But I will install the linux on the local Raid Disk. Can anybody tell me how I can setup autoyast so that it will use the Raid Disk as sda? I know It's alos possible to connect the systems later to the san but the other way I will like more. Regards -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

3 2

SLES files not found! (root cause: Network configuration ?)
by Jonathan Meller 17 Jul '06

17 Jul '06

Ave! I want to perform an installation on a machine with the following network configuration: eth0 connected on a 10.*.*.* subnet eth1 connected on a 192.168.0.* subnet eth0 is used to boot a linux image by pxe. eth1 is used to access SLES files by nfs. When the system is rebooted and autoyast is started, the SLES files are not found by autoyast. I suppose it is because autoyast uses the eth0 to get the SLES files, and in this case the eth0 is the PXE subnet. When I change the cables and eth0 becomes the SLES repository, it works. Is there some way to configure autoyast to recognize all subnets during its execution? Thus, I haven't care about the networks order. -- Jonathan Meller jonathan.meller(a)tteng.com.br ======================================================= Tools & Technologies - T&T Engenheiros Associados Ltda. Projetos de SW - Desenvolvendo soluções. Rua Riachuelo, 1098 Conj. 901 Centro - Porto Alegre - CEP 90010-272 Fone DDR: (51)3220-3268 Fone/Fax: (51)3220-3220 / 3220-3206 http://www.tteng.com.br/ tet(a)tteng.com.br =======================================================

1 0

RE: [suse-autoinstall] Problem with Printer setup
by GUNREBEN, PETER (Peter) 17 Jul '06

17 Jul '06

Frank, GUNREBEN, PETER (Peter) schrieb: > fschuett schrieb: > > Am Mittwoch, 12. Juli 2006 14:36 schrieb GUNREBEN, PETER (Peter): > > > Hi, > > > > > > my autoinstallation of SuSE 10.1 interrupts with an error message > > > stating the the CUPS server could not be contacted. > > > However, if I finish the installation I can setup the > > > printers with yast2 in the same way as I did it in the autoyast > > > configurator and do not face any problems. > > > > > I do face the same problem and did already report it as bug to > > bugzilla. It seems to appear, if one installs lpd printers. > > Actually, I'm trying to install to two lpd printers, but the > autoinstallation procedure does not work as expected. I've attached your bug report for easier reference: https://bugzilla.novell.com/show_bug.cgi?id=190173 Thanks, Peter.

1 0

RE: [suse-autoinstall] Problem with Printer setup
by GUNREBEN, PETER (Peter) 17 Jul '06

17 Jul '06

Hi fschuett, fschuett schrieb: > Am Mittwoch, 12. Juli 2006 14:36 schrieb GUNREBEN, PETER (Peter): > > Hi, > > > > my autoinstallation of SuSE 10.1 interrupts with an error message > > stating the the CUPS server could not be contacted. > > However, if I finish the installation I can setup the printers with > > yast2 in the same way as I did it in the autoyast configurator > > and do not face any problems. > > > I do face the same problem and did already report it as bug > to bugzilla. It seems to appear, if one installs lpd printers. Actually, I'm trying to install to two lpd printers, but the autoinstallation procedure does not work as expected. Peter.

1 0