November 2003 - openSUSE Autoinstall - openSUSE Mailing Lists

RE: [suse-autoinstall] ignoring disks
by Berge, Harry ten 05 Nov '03

05 Nov '03

Nope. The order is correct. But I presume autoyast has some priority order of disks and controllers, and maybe LVM disks are the first in this priority :-( What I'm looking for is something like '<ignore_device>/dev/sdb</ignore_device>'. Regards Harry > -----Original Message----- > From: SLATER,CHRIS (HP-Roseville,ex1) [mailto:chris.slater@hp.com] > Sent: Tuesday, November 04, 2003 5:13 PM > To: 'suse-autoinstall(a)suse.com' > Subject: RE: [suse-autoinstall] ignoring disks > > > It sounds to me like the install kernel may be seeing those > external disks > first - so maybe making them sda and sdb. I could be > misreading, but I'm > wondering if that's what's going on... > > Chris > > Christopher R. Slater > Unix Customer Engineer > Americas Service Delivery Operation > - Specialized Services - > Hewlett Packard Company, Roseville Site > (916) tn785-1802 > > http://ecardfile.com/id/chris_slater > > > -----Original Message----- > From: Alfred Isele [mailto:Alfred.Isele@fujitsu-siemens.com] > Sent: Tuesday, November 04, 2003 8:04 AM > To: Berge, Harry ten; Berge, Harry ten; 'suse-autoinstall(a)suse.com' > Subject: RE: [suse-autoinstall] ignoring disks > > > > ... > So far I only did autoyast with 2 IDE-disks /dev/hda and /dev/hdb > and /dev/hdb did not get touched by autoyast. > Sorry this didn't help you. > Alfred > > At 16:57 04.11.03 +0100, Berge, Harry ten wrote: > >I'm sorry, but that's not the case! I'm using the > construction mentioned by > >you, but the following happens: > > > >I've got an internal SCSI disk (/dev/sda) and 2 external SCSI disks > >(/dev/sdb and /dev/sdc) that are configured with LVM. > >Now autoyast is trying to install my partitioning scheme on > these external > >LVM disks, despite of the presence of /dev/sda! > > > >For me this is a very serious problem :-( > > > >Regards Harry > > > >> -----Original Message----- > >> From: Alfred Isele [mailto:Alfred.Isele@fujitsu-siemens.com] > >> Sent: Tuesday, November 04, 2003 4:40 PM > >> To: Berge, Harry ten; 'suse-autoinstall(a)suse.com' > >> Subject: Re: [suse-autoinstall] ignoring disks > >> > >> > >> > >> Hello! > >> Using the partitioning schema below only the partitions > >> for /boot, swap and / will be created on the first disk, > >> and the remaining disks will not be touched by autoyast: > >> ... > >> <partitioning config:type="list"> > >> <drive> > >> <use>all</use> > >> </drive> > >> </partitioning> > >> > >> ... > >> regards > >> Alfred > >> > >> > >> > >> At 16:18 04.11.03 +0100, Berge, Harry ten wrote: > >> >Hi, > >> > > >> >I have a problem: I want to ignore some disks when > >> partitioning. Can this be > >> >done with AutoYast? > >> > > >> >> Met vriendelijke groet / Mit freundlichen Grüßen / Kind Regards, > >> >> > >> >H.J. ten Berge > >> >Test & Integration > >> > > >> >HITT Traffic > >> >Oude Apeldoornseweg 41-45 > >> >P.O. Box 717 > >> >NL-7300 AS, APELDOORN > >> >The Netherlands > >> >Telephone +31-55-543 26 34 > >> >Fax +31-55-543 25 53 > >> >E-mail mailto:berge@hitt.nl > >> >Internet http://www.hitt-traffic.nl > >> > > >> > > >> > > >> >-- > >> >To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > >> >For additional commands, e-mail: suse-autoinstall-help(a)suse.com > >> > > >> > >> > >> -- > >> To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > >> For additional commands, e-mail: suse-autoinstall-help(a)suse.com > >> > > > >-- > >To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > >For additional commands, e-mail: suse-autoinstall-help(a)suse.com > > > > > -- > To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > For additional commands, e-mail: suse-autoinstall-help(a)suse.com > > -- > To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > For additional commands, e-mail: suse-autoinstall-help(a)suse.com >

1 0

RE: [suse-autoinstall] ignoring disks
by Berge, Harry ten 05 Nov '03

05 Nov '03

Yes, this works, but this install must also run on a system with IDE disks. And then this option doesn't work... Regards Harry > -----Original Message----- > From: damien.selles(a)eu.effem.com [mailto:damien.selles@eu.effem.com] > Sent: Tuesday, November 04, 2003 5:07 PM > To: Berge, Harry ten > Cc: 'Alfred Isele'; Berge, Harry ten; 'suse-autoinstall(a)suse.com' > Subject: RE: [suse-autoinstall] ignoring disks > > > Hi, > > And did you try with the tag <devive> ? > > <partitioning config:type="list"> > <drive> > <device>/dev/sda</device> > <initialize config:type="boolean">true</initialize> > <partitions config:type="list"> > <partition> > ..... > </partition> > </partitions> > <use>all</use> > </drive> > </partitioning> > > this should only use your sda disc. > > hope this will help. > > regards, > Damien. > > > > > > > > "Berge, Harry ten" <berge(a)hitt.nl> > hitt.nl > 04/11/2003 16:57 > > > > > To: > "'Alfred Isele'" <Alfred.Isele(a)fujitsu-siemens.com>, "Berge, > Harry ten" > <berge(a)hitt.nl>, "'suse-autoinstall(a)suse.com'" > <suse-autoinstall(a)suse.com> > cc: > > > > Subject: > RE: [suse-autoinstall] ignoring disks > > > I'm sorry, but that's not the case! I'm using the > construction mentioned > by > you, but the following happens: > > I've got an internal SCSI disk (/dev/sda) and 2 external SCSI disks > (/dev/sdb and /dev/sdc) that are configured with LVM. > Now autoyast is trying to install my partitioning scheme on > these external > LVM disks, despite of the presence of /dev/sda! > > For me this is a very serious problem :-( > > Regards Harry > > > -----Original Message----- > > From: Alfred Isele [mailto:Alfred.Isele@fujitsu-siemens.com] > > Sent: Tuesday, November 04, 2003 4:40 PM > > To: Berge, Harry ten; 'suse-autoinstall(a)suse.com' > > Subject: Re: [suse-autoinstall] ignoring disks > > > > > > > > Hello! > > Using the partitioning schema below only the partitions > > for /boot, swap and / will be created on the first disk, > > and the remaining disks will not be touched by autoyast: > > ... > > <partitioning config:type="list"> > > <drive> > > <use>all</use> > > </drive> > > </partitioning> > > > > ... > > regards > > Alfred > > > > > > > > At 16:18 04.11.03 +0100, Berge, Harry ten wrote: > > >Hi, > > > > > >I have a problem: I want to ignore some disks when > > partitioning. Can this be > > >done with AutoYast? > > > > > >> Met vriendelijke groet / Mit freundlichen Grüßen / Kind Regards, > > >> > > >H.J. ten Berge > > >Test & Integration > > > > > >HITT Traffic > > >Oude Apeldoornseweg 41-45 > > >P.O. Box 717 > > >NL-7300 AS, APELDOORN > > >The Netherlands > > >Telephone +31-55-543 26 34 > > >Fax +31-55-543 25 53 > > >E-mail mailto:berge@hitt.nl > > >Internet http://www.hitt-traffic.nl > > > > > > > > > > > >-- > > >To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > > >For additional commands, e-mail: suse-autoinstall-help(a)suse.com > > > > > > > > > -- > > To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > > For additional commands, e-mail: suse-autoinstall-help(a)suse.com > > > > -- > To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > For additional commands, e-mail: suse-autoinstall-help(a)suse.com > > > >

1 0

RE: [suse-autoinstall] ignoring disks
by SLATER,CHRIS (HP-Roseville,ex1) 04 Nov '03

04 Nov '03

It sounds to me like the install kernel may be seeing those external disks first - so maybe making them sda and sdb. I could be misreading, but I'm wondering if that's what's going on... Chris Christopher R. Slater Unix Customer Engineer Americas Service Delivery Operation - Specialized Services - Hewlett Packard Company, Roseville Site (916) tn785-1802 http://ecardfile.com/id/chris_slater -----Original Message----- From: Alfred Isele [mailto:Alfred.Isele@fujitsu-siemens.com] Sent: Tuesday, November 04, 2003 8:04 AM To: Berge, Harry ten; Berge, Harry ten; 'suse-autoinstall(a)suse.com' Subject: RE: [suse-autoinstall] ignoring disks ... So far I only did autoyast with 2 IDE-disks /dev/hda and /dev/hdb and /dev/hdb did not get touched by autoyast. Sorry this didn't help you. Alfred At 16:57 04.11.03 +0100, Berge, Harry ten wrote: >I'm sorry, but that's not the case! I'm using the construction mentioned by >you, but the following happens: > >I've got an internal SCSI disk (/dev/sda) and 2 external SCSI disks >(/dev/sdb and /dev/sdc) that are configured with LVM. >Now autoyast is trying to install my partitioning scheme on these external >LVM disks, despite of the presence of /dev/sda! > >For me this is a very serious problem :-( > >Regards Harry > >> -----Original Message----- >> From: Alfred Isele [mailto:Alfred.Isele@fujitsu-siemens.com] >> Sent: Tuesday, November 04, 2003 4:40 PM >> To: Berge, Harry ten; 'suse-autoinstall(a)suse.com' >> Subject: Re: [suse-autoinstall] ignoring disks >> >> >> >> Hello! >> Using the partitioning schema below only the partitions >> for /boot, swap and / will be created on the first disk, >> and the remaining disks will not be touched by autoyast: >> ... >> <partitioning config:type="list"> >> <drive> >> <use>all</use> >> </drive> >> </partitioning> >> >> ... >> regards >> Alfred >> >> >> >> At 16:18 04.11.03 +0100, Berge, Harry ten wrote: >> >Hi, >> > >> >I have a problem: I want to ignore some disks when >> partitioning. Can this be >> >done with AutoYast? >> > >> >> Met vriendelijke groet / Mit freundlichen Grüßen / Kind Regards, >> >> >> >H.J. ten Berge >> >Test & Integration >> > >> >HITT Traffic >> >Oude Apeldoornseweg 41-45 >> >P.O. Box 717 >> >NL-7300 AS, APELDOORN >> >The Netherlands >> >Telephone +31-55-543 26 34 >> >Fax +31-55-543 25 53 >> >E-mail mailto:berge@hitt.nl >> >Internet http://www.hitt-traffic.nl >> > >> > >> > >> >-- >> >To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com >> >For additional commands, e-mail: suse-autoinstall-help(a)suse.com >> > >> >> >> -- >> To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com >> For additional commands, e-mail: suse-autoinstall-help(a)suse.com >> > >-- >To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com >For additional commands, e-mail: suse-autoinstall-help(a)suse.com > -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com

1 0

RE: [suse-autoinstall] ignoring disks
by damien.selles＠eu.effem.com 04 Nov '03

04 Nov '03

Hi, And did you try with the tag <devive> ? <partitioning config:type="list"> <drive> <device>/dev/sda</device> <initialize config:type="boolean">true</initialize> <partitions config:type="list"> <partition> ..... </partition> </partitions> <use>all</use> </drive> </partitioning> this should only use your sda disc. hope this will help. regards, Damien. "Berge, Harry ten" <berge(a)hitt.nl> hitt.nl 04/11/2003 16:57 To: "'Alfred Isele'" <Alfred.Isele(a)fujitsu-siemens.com>, "Berge, Harry ten" <berge(a)hitt.nl>, "'suse-autoinstall(a)suse.com'" <suse-autoinstall(a)suse.com> cc: Subject: RE: [suse-autoinstall] ignoring disks I'm sorry, but that's not the case! I'm using the construction mentioned by you, but the following happens: I've got an internal SCSI disk (/dev/sda) and 2 external SCSI disks (/dev/sdb and /dev/sdc) that are configured with LVM. Now autoyast is trying to install my partitioning scheme on these external LVM disks, despite of the presence of /dev/sda! For me this is a very serious problem :-( Regards Harry > -----Original Message----- > From: Alfred Isele [mailto:Alfred.Isele@fujitsu-siemens.com] > Sent: Tuesday, November 04, 2003 4:40 PM > To: Berge, Harry ten; 'suse-autoinstall(a)suse.com' > Subject: Re: [suse-autoinstall] ignoring disks > > > > Hello! > Using the partitioning schema below only the partitions > for /boot, swap and / will be created on the first disk, > and the remaining disks will not be touched by autoyast: > ... > <partitioning config:type="list"> > <drive> > <use>all</use> > </drive> > </partitioning> > > ... > regards > Alfred > > > > At 16:18 04.11.03 +0100, Berge, Harry ten wrote: > >Hi, > > > >I have a problem: I want to ignore some disks when > partitioning. Can this be > >done with AutoYast? > > > >> Met vriendelijke groet / Mit freundlichen Grüßen / Kind Regards, > >> > >H.J. ten Berge > >Test & Integration > > > >HITT Traffic > >Oude Apeldoornseweg 41-45 > >P.O. Box 717 > >NL-7300 AS, APELDOORN > >The Netherlands > >Telephone +31-55-543 26 34 > >Fax +31-55-543 25 53 > >E-mail mailto:berge@hitt.nl > >Internet http://www.hitt-traffic.nl > > > > > > > >-- > >To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > >For additional commands, e-mail: suse-autoinstall-help(a)suse.com > > > > > -- > To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > For additional commands, e-mail: suse-autoinstall-help(a)suse.com > -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com

1 0

RE: [suse-autoinstall] ignoring disks
by Berge, Harry ten 04 Nov '03

04 Nov '03

I'm sorry, but that's not the case! I'm using the construction mentioned by you, but the following happens: I've got an internal SCSI disk (/dev/sda) and 2 external SCSI disks (/dev/sdb and /dev/sdc) that are configured with LVM. Now autoyast is trying to install my partitioning scheme on these external LVM disks, despite of the presence of /dev/sda! For me this is a very serious problem :-( Regards Harry > -----Original Message----- > From: Alfred Isele [mailto:Alfred.Isele@fujitsu-siemens.com] > Sent: Tuesday, November 04, 2003 4:40 PM > To: Berge, Harry ten; 'suse-autoinstall(a)suse.com' > Subject: Re: [suse-autoinstall] ignoring disks > > > > Hello! > Using the partitioning schema below only the partitions > for /boot, swap and / will be created on the first disk, > and the remaining disks will not be touched by autoyast: > ... > <partitioning config:type="list"> > <drive> > <use>all</use> > </drive> > </partitioning> > > ... > regards > Alfred > > > > At 16:18 04.11.03 +0100, Berge, Harry ten wrote: > >Hi, > > > >I have a problem: I want to ignore some disks when > partitioning. Can this be > >done with AutoYast? > > > >> Met vriendelijke groet / Mit freundlichen Grüßen / Kind Regards, > >> > >H.J. ten Berge > >Test & Integration > > > >HITT Traffic > >Oude Apeldoornseweg 41-45 > >P.O. Box 717 > >NL-7300 AS, APELDOORN > >The Netherlands > >Telephone +31-55-543 26 34 > >Fax +31-55-543 25 53 > >E-mail mailto:berge@hitt.nl > >Internet http://www.hitt-traffic.nl > > > > > > > >-- > >To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > >For additional commands, e-mail: suse-autoinstall-help(a)suse.com > > > > > -- > To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > For additional commands, e-mail: suse-autoinstall-help(a)suse.com >

2 1

ignoring disks
by Berge, Harry ten 04 Nov '03

04 Nov '03

Hi, I have a problem: I want to ignore some disks when partitioning. Can this be done with AutoYast? > Met vriendelijke groet / Mit freundlichen Grüßen / Kind Regards, > H.J. ten Berge Test & Integration HITT Traffic Oude Apeldoornseweg 41-45 P.O. Box 717 NL-7300 AS, APELDOORN The Netherlands Telephone +31-55-543 26 34 Fax +31-55-543 25 53 E-mail mailto:berge@hitt.nl Internet http://www.hitt-traffic.nl

2 1

Strange behavior merging more than 2 classes at ones.
by damien.selles＠eu.effem.com 04 Nov '03

04 Nov '03

Hi All, I'm working with the 8.1, and I found some strange behavior of autoyast when merging several classes in the same time: for example: with the following examples, here is the results I get: Classe A + Classe B => content A1 and B2 <- OK Classe A + Classe C => content A1 and C2 and C3 <- OK Classe B + Classe C => content B1 and B2 and C3 <- OK Classe A + Classe B => content B1 and B2 and C3 <- ???? why not A1 + B2 + B3 ??? Anyone encounter the same problem? Anas is it a bug / known bug related to the version 8.1??? Any workaround? running the xslt merging with a script? Thx for your help. Regards, Damien Selles. ------------------------------------------- classe A file : order 10 <configure> <scripts> <post-scripts config:type="list"> <script> <filename>classeA.sh</filename> <interpreter>shell</interpreter> <source> <![CDATA[#! /bin/sh A1 ]]> </source> </script> </post-scripts> </scripts> </configure> ------------------------------------------- classe B file : order 9 <configure> <scripts> <post-scripts config:type="list"> <script> <filename>classeA.sh</filename> <interpreter>shell</interpreter> <source> <![CDATA[#! /bin/sh B1 ]]> </source> </script> <script> <filename>classeB.sh</filename> <interpreter>shell</interpreter> <source> <![CDATA[#! /bin/sh B2 ]]> </source> </script> </post-scripts> </scripts> </configure> ------------------------------------------- classe C file : order 8 <configure> <scripts> <post-scripts config:type="list"> <script> <filename>classeA.sh</filename> <interpreter>shell</interpreter> <source> <![CDATA[#! /bin/sh C1 ]]> </source> </script> <script> <filename>classeB.sh</filename> <interpreter>shell</interpreter> <source> <![CDATA[#! /bin/sh C2 ]]> </source> </script> <script> <filename>classeC.sh</filename> <interpreter>shell</interpreter> <source> <![CDATA[#! /bin/sh C3 ]]> </source> </script> </post-scripts> </scripts> </configure>

1 0

Re: [suse-autoinstall] Modifications to CD1
by Robison, Jonathon (M.) 03 Nov '03

03 Nov '03

Thanks for the help. One small problem - changing the /suse/setup/descr changes the things that show up if the user chooses to "Select individual packages". I don't believe it changes the 3 items that show up in the install BEFORE that step - the one that asks "Minimal, Minimal with X, or Default". Have I misread your email, or is there another location for those definitions? I've already edited selections, and added a couple of .sel files, and those all show up correctly in the package selections area, but I'd really rather modify the previous screen. --Jon Robison On Sun, 2003-11-02 at 05:54, Michal Kubecek wrote: On Mon, Oct 27, 2003 at 12:07:51PM -0500, Robison, Jonathon (M.) wrote: > I have come to the conclusion that because of the differences in hardware in > all my test clients, I cannot use the normal autoyast xml file methods. I have > been forced to instead change default.sel to ensure my package choices. This > ensures that the normal installations hardware setup systems work to make > sure my clients get what their individual hardware needs. > > My next step is two-fold. I need to strip CD1 of all the rpm packages, and modify the boot choices so that the "Installation" options use my NFS server instead of the CD. Anyone care to point me in the right direction on that one? All you need for network installation is the /boot directory. Then edit the file /boot/loader/isolinux.cfg and create the ISO image as described in isolinux docs (/usr/share/doc/packages/syslinux/isolinux.doc). Example of isolinux.cfg sections: -------------------------------------------------------------------------------- # demo install label demo kernel linux append initrd=initrd ramdisk_size=65536 showopts install=nfs://10.23.51.65/mnt/suse insmod=3c59x insmod=eepro100 # lnx01 label lnx01 kernel linux append initrd=initrd ramdisk_size=65536 showopts install=nfs://10.23.51.65/mnt/suse autoyast= <http://10.23.51.65/ay/lnx01/> http://10.23.51.65/ay/lnx01/ insmod=3c59x insmod=eepro100 -------------------------------------------------------------------------------- The only problem with this is that installer cannot autodetect network cards so that I have to add explicit 'insmod=xxx' to the command line. If there are only few different cards you can write all of them. Otherwise you would have write correct 'insmod=xxx' by hand in the installation menu. If you don't use DHCP, you need to add network parameters (ip=xxx netmask=xxx). > Secondly, during the normal install process users are asked to choose between "Minimal, Minimal with X, default " etc., etc. I need to change that to > 1. Normal office user > 2. J2EE Developer > 3. Systems Developer > 4. Kitchen sink. > > This is NOT in the "choose individual packages" selection, but rather the normal install menu that comes before that. > > Any ideas on how to change the normal install process/CD to show my menu choices > instead of the regular ones? Just replace the standard selection files in /suse/setup/descr with your ones. Don't forget to edit 'selections' as well. Michal Kubecek -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: <mailto:suse-autoinstall-help@suse.com> suse-autoinstall-help(a)suse.com

2 1

Re: [suse-autoinstall] info file location
by Robison, Jonathon (M.) 03 Nov '03

03 Nov '03

Shouldn't the info files be inside the initrd? --Jon Robison On Mon, 2003-11-03 at 06:48, Larry O'Neil wrote: Hi, Thanks for the suggestion Damien, however placing the info file in /boot/loader/ on the cd doesnt seem to work either, the installer still hasnt found the info file on the cd. has anyone actually got this to work from a cd and not a floppy? does anyone know what i might be doing wrong? any comments or suggestions are greatly appreciated. Thanks Larry On Thu, 30 Oct 2003 damien.selles(a)eu.effem.com wrote: > Hi larry, > > That depends on the way you created your bootable cd. > > Assuming you did it with el torrito method, I suggest you put the info > file in the same place as the image of your bootable floppy. > > for example on the Suse CD, this image is in /boot/loader/ > then just copy your infofile in taht directory. > Once the image of the floppy will be loaded, infofile will be considered > to be placed on the root. > > hoping this will help you, > > Regards, > Damien Selles > > > > > > > > Larry O'Neil <larry(a)netsoc.ucd.ie> > netsoc.ucd.ie > 30/10/2003 16:41 > > > > > To: > suse-autoinstall(a)suse.com > cc: > > > > Subject: > [suse-autoinstall] info file location > > > > Hi, > i have the autoinstallation working perfectly with the info file on the > floppy, but is there a way to read the info file from a bootable cd? > placing it on the root of the cd doesnt seem to work... > > has anobody got any suggestions? > > > Thank you > Larry O'Neill > > > -- > To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com > For additional commands, e-mail: suse-autoinstall-help(a)suse.com > > > > -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: <mailto:suse-autoinstall-help@suse.com> suse-autoinstall-help(a)suse.com

1 0

Re: [suse-autoinstall] info file location
by damien.selles＠eu.effem.com 03 Nov '03

03 Nov '03

Hi larry, That depends on the way you created your bootable cd. Assuming you did it with el torrito method, I suggest you put the info file in the same place as the image of your bootable floppy. for example on the Suse CD, this image is in /boot/loader/ then just copy your infofile in taht directory. Once the image of the floppy will be loaded, infofile will be considered to be placed on the root. hoping this will help you, Regards, Damien Selles Larry O'Neil <larry(a)netsoc.ucd.ie> netsoc.ucd.ie 30/10/2003 16:41 To: suse-autoinstall(a)suse.com cc: Subject: [suse-autoinstall] info file location Hi, i have the autoinstallation working perfectly with the info file on the floppy, but is there a way to read the info file from a bootable cd? placing it on the root of the cd doesnt seem to work... has anobody got any suggestions? Thank you Larry O'Neill -- To unsubscribe, e-mail: suse-autoinstall-unsubscribe(a)suse.com For additional commands, e-mail: suse-autoinstall-help(a)suse.com

2 2