[opensuse-arm] Updating RPi 2B image to kernel 4.0.1 leaves non-bootable system
I had a running image on my RPi 2B and saw kernel 4.0.1 being available. Using zypper I updated the kernel, but after that the system was no longer bootable. The newest image still has a 3.19 kernel. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Am 18.05.2015 um 00:51 schrieb Freek de Kruijf:
I had a running image on my RPi 2B and saw kernel 4.0.1 being available. Using zypper I updated the kernel, but after that the system was no longer bootable.
The newest image still has a 3.19 kernel.
Are you maybe accidentally installing a kernel-default from Factory (which I think does not yet support RPi2) over the kernel-rpi2 or so from the Contrib project? Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Dilip Upmanyu, Graham Norton; HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Op dinsdag 19 mei 2015 16:51:03 schreef Andreas Färber:
Am 18.05.2015 um 00:51 schrieb Freek de Kruijf:
I had a running image on my RPi 2B and saw kernel 4.0.1 being available. Using zypper I updated the kernel, but after that the system was no longer bootable.
The newest image still has a 3.19 kernel.
Are you maybe accidentally installing a kernel-default from Factory (which I think does not yet support RPi2) over the kernel-rpi2 or so from the Contrib project?
Yes, this 4.0.1 kernel is in the armv7l Factory repository, the repository that is defined in the image, next to the Contrib repository. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 05/19/2015 04:58 PM, Freek de Kruijf wrote:
Am 18.05.2015 um 00:51 schrieb Freek de Kruijf:
I had a running image on my RPi 2B and saw kernel 4.0.1 being available. Using zypper I updated the kernel, but after that the system was no longer bootable.
The newest image still has a 3.19 kernel. Are you maybe accidentally installing a kernel-default from Factory (which I think does not yet support RPi2) over the kernel-rpi2 or so from the Contrib project? Yes, this 4.0.1 kernel is in the armv7l Factory repository, the repository
Op dinsdag 19 mei 2015 16:51:03 schreef Andreas Färber: that is defined in the image, next to the Contrib repository.
Ah, that explains it. The raspberry pi 2 requires a special downstream kernel today still, hence the name "kernel-rpi2". The kernel you installed is probably "kernel-default" which is an upstream kernel and doesn't support the RPi2 properly yet FWIW. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Op dinsdag 19 mei 2015 17:02:24 schreef Alexander Graf:
On 05/19/2015 04:58 PM, Freek de Kruijf wrote:
Op dinsdag 19 mei 2015 16:51:03 schreef Andreas Färber:
Am 18.05.2015 um 00:51 schrieb Freek de Kruijf:
I had a running image on my RPi 2B and saw kernel 4.0.1 being available. Using zypper I updated the kernel, but after that the system was no longer bootable.
The newest image still has a 3.19 kernel.
Are you maybe accidentally installing a kernel-default from Factory (which I think does not yet support RPi2) over the kernel-rpi2 or so from the Contrib project?
Yes, this 4.0.1 kernel is in the armv7l Factory repository, the repository that is defined in the image, next to the Contrib repository.
Ah, that explains it. The raspberry pi 2 requires a special downstream kernel today still, hence the name "kernel-rpi2". The kernel you installed is probably "kernel-default" which is an upstream kernel and doesn't support the RPi2 properly yet FWIW.
So maybe this kernel should not be available in the repo? -- fr.gr. member openSUSE Freek de Kruijf P.S. No need to send it to my address directly, I am on the mailing list. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 05/19/2015 06:02 PM, Freek de Kruijf wrote:
Op dinsdag 19 mei 2015 17:02:24 schreef Alexander Graf:
On 05/19/2015 04:58 PM, Freek de Kruijf wrote:
Am 18.05.2015 um 00:51 schrieb Freek de Kruijf:
I had a running image on my RPi 2B and saw kernel 4.0.1 being available. Using zypper I updated the kernel, but after that the system was no longer bootable.
The newest image still has a 3.19 kernel. Are you maybe accidentally installing a kernel-default from Factory (which I think does not yet support RPi2) over the kernel-rpi2 or so from the Contrib project? Yes, this 4.0.1 kernel is in the armv7l Factory repository, the repository
Op dinsdag 19 mei 2015 16:51:03 schreef Andreas Färber: that is defined in the image, next to the Contrib repository. Ah, that explains it. The raspberry pi 2 requires a special downstream kernel today still, hence the name "kernel-rpi2". The kernel you installed is probably "kernel-default" which is an upstream kernel and doesn't support the RPi2 properly yet FWIW. So maybe this kernel should not be available in the repo?
It's part of the official Factory:ARM repository, because all upstream (non-contrib) boards use it. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
Op dinsdag 19 mei 2015 18:07:19 schreef Alexander Graf:
On 05/19/2015 06:02 PM, Freek de Kruijf wrote:
So maybe this kernel should not be available in the repo?
It's part of the official Factory:ARM repository, because all upstream (non-contrib) boards use it.
So this kernel conflicts with kernel-rpi2 or vice versa. Is it possible to keep Contrib synchronized with the same kernel version in Factory:ARM? -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
On 05/19/2015 06:36 PM, Freek de Kruijf wrote:
Op dinsdag 19 mei 2015 18:07:19 schreef Alexander Graf:
On 05/19/2015 06:02 PM, Freek de Kruijf wrote:
So maybe this kernel should not be available in the repo? It's part of the official Factory:ARM repository, because all upstream (non-contrib) boards use it. So this kernel conflicts with kernel-rpi2 or vice versa. Is it possible to keep Contrib synchronized with the same kernel version in Factory:ARM?
Nope :). The usual way this goes is that the downstream kernel slowly gets merged upstream and then eventually we can take kernel-default instead. During the transitioning phase where there is a downstream kernel, we have contribs. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org
participants (3)
-
Alexander Graf -
Andreas Färber -
Freek de Kruijf