January 2014 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] Build a kernel module for a downstream kernel (sun7i)
by Oscar C 24 Jan '14

24 Jan '14

Hi, I'm trying to build the rtl8188eu kernel module for my wifi dongle locally in my cubieboard2. The build fails with the following error: + make -C /usr/src/linux-obj/armv7hl/sun7i modules M=/usr/src/packages/BUILD/rtl8188eu-3.13/obj/sun7i make: Entering directory `/usr/src/linux-3.4.75-2-obj/armv7hl/sun7i' make: Entering an unknown directory make: *** ../../../linux-3.4.75-2: No such file or directory. Stop. make: Leaving an unknown directory make: *** [all] Error 2 make: Leaving directory `/usr/src/linux-3.4.75-2-obj/armv7hl/sun7i' The error is clear: the directory /usr/src/linux-3.4.75-2 does not exist. That directory is where the kernel sources should be installed, but I don't have any package with the kernel source: linux:~ # ls -l /usr/src total 16 lrwxrwxrwx 1 root root 17 feb 4 01:59 linux -> linux-3.7.10-1.24 drwxr-xr-x 3 root root 4096 feb 4 02:09 linux-3.4.75-2-obj drwxr-xr-x 3 root root 4096 feb 4 02:09 linux-obj drwxr-xr-x 8 root root 4096 ene 13 2014 packages When I built the kernel-sun7i package in OBS (home:ocurero:arm) it didn't build kernel-sun7i-source, only kernel-sun7i, kernel-sun7i-devel and kernel-sun7i-base packages where created. What packages do I need to build to be able to compile kernel modules for kernel-sun7i? Thanks! -- -- Cheers -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 11

[opensuse-arm] RaspberryPi:upstream update -- partitioning
by Andreas Färber 23 Jan '14

23 Jan '14

Hi Alex and Marcus, Last night I tested the new JeOS-raspberrypi image that had finally been built. https://build.opensuse.org/package/show/devel:ARM:Factory:Contrib:Raspberry… (note: not the old ...:RaspberryPi/JeOS-raspberrypi) It did not boot - screen stayed dark, no green LED activity. It uses GPT, so I tried converting to MBR (with gdisk) - no change. I further changed the MBR partition type of the first of the three partitions from EFI to FAT16 - starts booting U-Boot, yay! The bad news is, I don't see how I could tweak either of these in the Kiwi config. :/ It seems that the new partition layout is triggered by firmware="vboot". Does that mean changes need to be done in Kiwi code? Booting with the manually changed partitions didn't get beyond "Starting kernel ..." due to fdt not loaded. That part is hopefully fixed with tonight's JeOS changes - new image can't be built due to unresolved sysconfig-network at the moment. Regards, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 19

[opensuse-arm] pre-build ARM rootfs images went missing?
by Gábor Nyers 22 Jan '14

22 Jan '14

Hi, I want to update/extend my openSUSE on SGS2 HOWTO with 13.1: http://en.opensuse.org/User:Gnyers/openSUSE-12.3-on-SGS2 Am I looking at the wrong place? http://download.opensuse.org/ports/armv7hl/distribution/13.1/appliances/ We haven't dropped these root images, did we? Thanks, Gábor -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 2

[opensuse-arm] Tegra status update
by Andreas Färber 19 Jan '14

19 Jan '14

Hello, In my quest for the state of graphics support on Tegra, my AC100 is still running a bit unstable with marvin24's for-next branch and fbdev only, but I made progress getting our support for the Colibri T20 into a cleaner state: Tegra uses yet again a different binary from u-boot.bin and u-boot-dtb.bin, u-boot-dtb-tegra.bin, with a prepended SPL. Flashing it without the SPL, there was no serial output on boot-up. https://build.opensuse.org/request/show/214385 It seems that the grate driver is not yet being upstreamed: https://github.com/grate-driver Not sure how well packaging would work ATM. There's also an older xf86-video-opentegra, but not having been updated since March 2013 and not on freedesktop.org: https://gitorious.org/thierryreding/xf86-video-opentegra/commits/ If anyone knows about those, let me know. Cheers, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 1

[opensuse-arm] [ANN] freedreno packaged
by Andreas Färber 18 Jan '14

18 Jan '14

Hi, FYI freedreno graphics drivers have been packaged in X11:XOrg this week. They are for the Qualcomm Adreno chipset, found in Qualcomm Snapdragon as well as Freescale i.MX51 and i.MX53 SoCs. The msm DRM drivers were already enabled in the Factory kernel. An updated Mesa and a new libdrm subpackage libdrm_freedreno1 are in Factory by now, and the new xf86-video-freedreno is pending: https://build.opensuse.org/request/show/214191 More info: https://github.com/freedreno/freedreno/wiki Enjoy, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] A few things with the 13.1 image
by Jim Henderson 10 Jan '14

10 Jan '14

I'm still going through the history of messages on the list, so pardon me if these have been covered already. 1. On my setup, I'm getting a smaller graphical screen resolution (including on the text console) than 1920x1080. I've tried fiddling with the hdmi_mode and hdmi_group settings, but I still only am getting 1824x984 on the display. 2. It seems the snd_bcm2835 module isn't set up to autoload. I added it into a file in /etc/modules-load.d/ and that seems to have resolved it. 3. I'm happy to report that lightdm works well with e17 as a desktop. I was unable to get gdm to work properly, and just setting the window manager in /etc/sysconfig/windowmanager to run e17 didn't work, but selecting it with lightdm did. I did, however, run into a SEGV error with e17 if I enabled hardware acceleration (I thought the pi had hardware accel available - but maybe I misunderstood the specs). 4. The issues I mentioned on factory with library dependencies being missing to get mopidy working are not a problem with the 13.1 image and its repositories. 5. I did run into the partition size issue for the BOOT partition, which probably was to be expected. Once I did that and had the system connected to my projector, I was pleased to see the firstboot process that was in place. My wireless adapter (using the rt2800 driver, it looks like) was detected and ran perfectly. That also was a change over the image on the wiki page - with that one, I had to install the firmware to get it working. 6. I noticed a number of services running that I hadn't asked for - cups/ cupsd in particular, but also modemmanager. Is there a reason that those services are configured to start automatically, rather than requiring the user explicitly enable them? (It seems like only necessary services - sshd, network, GUI if installed, Avahi - should be enabled by default, given the memory footprint considerations). Jim -- Jim Henderson Please keep on-topic replies on the list so everyone benefits -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 11

[opensuse-arm] [PATCH] config: armv6hl: Extend default config for Raspberry Pi
by Andreas Färber 09 Jan '14

09 Jan '14

Enable CONFIG_FB_SIMPLE as that's what U-Boot exposes in DT. Signed-off-by: Andreas Färber <afaerber(a)suse.de> --- config/armv6hl/default | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/config/armv6hl/default b/config/armv6hl/default index a8d06c4..128863a 100644 --- a/config/armv6hl/default +++ b/config/armv6hl/default @@ -3743,7 +3743,7 @@ CONFIG_FB_METRONOME=m CONFIG_FB_MX3=m CONFIG_FB_BROADSHEET=m # CONFIG_FB_AUO_K190X is not set -# CONFIG_FB_SIMPLE is not set +CONFIG_FB_SIMPLE=y CONFIG_OMAP2_VRFB=y CONFIG_OMAP2_DSS=y # CONFIG_OMAP2_DSS_DEBUG is not set -- 1.8.4 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1

[opensuse-arm] RPi and OBS - 13.1 repos?
by Jim Henderson 09 Jan '14

09 Jan '14

I'm wondering at the moment if it's worth building against 13.1 on armv6hl - or if I should be looking to factory at the moment. It looks like OBS is able to build against the platform, from the bits I've picked up on this list so far, but I haven't yet determined what repository I need to add in order for builds to succeed. Right now I'm getting "unresolvable" statuses on things like libtool and other development packages. Can someone point me in the right direction to get the proper repo added for 13.1 ARM? Thanks, Jim -- Jim Henderson Please keep on-topic replies on the list so everyone benefits -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Latest 13.1 JeOS image for Chromebook broken
by Daniel Bischof 08 Jan '14

08 Jan '14

Hi, the image openSUSE-13.1-ARM-JeOS-chromebook.armv7l-1.12.1-Build15.1 from [1] is broken. It does not even show a bootloader prompt or something, the Chromebook just falls back to the white screen (the one that expects Ctrl-U to boot from SD). Something I could try? [1] http://download.opensuse.org/repositories/devel:/ARM:/13.1:/Contrib:/Chrome… Best regards, --D.B. -- Daniel Bischof <suse-bugz(a)bischof.org> -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 3

[opensuse-arm] [PATCH] config: armv6hl: Extend default config for Raspberry Pi
by Andreas Färber 08 Jan '14

08 Jan '14

Activate CONFIG_ARM_ATAG_DTB_COMPAT for it to receive U-Boot bootargs. Enable BCM2835_{I2C,WDT}, MMC_SDHCI_BCM2835, USB_HCD_BCMA as modules. Signed-off-by: Andreas Färber <afaerber(a)suse.de> --- config/armv6hl/default | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/config/armv6hl/default b/config/armv6hl/default index 9276c6a..a8d06c4 100644 --- a/config/armv6hl/default +++ b/config/armv6hl/default @@ -578,7 +578,9 @@ CONFIG_DEPRECATED_PARAM_STRUCT=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set CONFIG_CMDLINE="console=ttyAMA0" CONFIG_CMDLINE_FROM_BOOTLOADER=y # CONFIG_CMDLINE_EXTEND is not set @@ -2623,7 +2625,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_I2C_BCM2835 is not set +CONFIG_I2C_BCM2835=m CONFIG_I2C_CBUS_GPIO=m # CONFIG_I2C_DESIGNWARE_PLATFORM is not set # CONFIG_I2C_GPIO is not set @@ -3012,7 +3014,7 @@ CONFIG_TWL4030_WATCHDOG=m CONFIG_MAX63XX_WATCHDOG=m CONFIG_IMX2_WDT=m CONFIG_KEMPLD_WDT=m -# CONFIG_BCM2835_WDT is not set +CONFIG_BCM2835_WDT=m CONFIG_MEN_A21_WDT=m # @@ -4018,7 +4020,7 @@ CONFIG_USB_SL811_HCD=m # CONFIG_USB_SL811_HCD_ISO is not set CONFIG_USB_R8A66597_HCD=m # CONFIG_USB_IMX21_HCD is not set -# CONFIG_USB_HCD_BCMA is not set +CONFIG_USB_HCD_BCMA=m CONFIG_USB_HCD_SSB=m # CONFIG_USB_HCD_TEST_MODE is not set # CONFIG_USB_MUSB_HDRC is not set @@ -4245,7 +4247,7 @@ CONFIG_MMC_SDHCI_ESDHC_IMX=m CONFIG_MMC_SDHCI_PXAV3=m CONFIG_MMC_SDHCI_PXAV2=m CONFIG_MMC_SDHCI_BCM_KONA=m -# CONFIG_MMC_SDHCI_BCM2835 is not set +CONFIG_MMC_SDHCI_BCM2835=m CONFIG_MMC_OMAP=m CONFIG_MMC_OMAP_HS=m CONFIG_MMC_MXC=m -- 1.8.4 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1