November 2012 - openSUSE ARM - openSUSE Mailing Lists

[opensuse-arm] kiwi FAT32 support
by Guillaume Gardet 19 Nov '12

19 Nov '12

Hi Marcus, I am trying to build an armv5 image for Raspberry Pi with a FAT32 boot partition but the partition flag is wrong. It is 83 (Linux) instead of 0C (FAT32 LBA). Any idea why? Moreover, in OBS JeOS image build, FAT32 partition cannot be mounted. Error log: ******************************************************************************** [ 2030s] Nov-19 10:54:35 <1> : EXEC [mkdosfs -F 32 -n 'BOOT' /dev/mapper/loop0p1 2>&1] [ 2030s] Nov-19 10:54:35 <1> : Copying boot image to disk [ 2030s] Nov-19 10:54:35 <1> : EXEC [blkid /dev/mapper/loop0p1 2>&1] [ 2030s] Nov-19 10:54:35 <1> : EXEC [pvs --noheadings -o vg_name /dev/mapper/loop0p1 2>/dev/null] [ 2031s] Nov-19 10:54:36 <1> : EXEC [blkid -o value -s TYPE /dev/mapper/loop0p1] [ 2031s] Nov-19 10:54:36 <1> : EXEC [dd if=/dev/mapper/loop0p1 bs=128k count=1 2>/dev/null | grep -qi CLIC] [ 2031s] Nov-19 10:54:36 <1> : EXEC [mount /dev/mapper/loop0p1 /tmp/kiwiloop.awflR6 2>&1] [ 2031s] [ 2002.933444] FAT-fs (dm-0): codepage cp437 not found [ 2033s] Nov-19 10:54:38 <3> : Failed to mount /dev/mapper/loop0p1 to: /tmp/kiwiloop.awflR6: mount: wrong fs type, bad option, bad superblock on /dev/mapper/loop0p1, [ 2033s] missing codepage or helper program, or other error [ 2033s] In some cases useful info is found in syslog - try [ 2033s] dmesg | tail or so [ 2033s] Nov-19 10:54:38 <1> : EXEC [sync] [ 2033s] Nov-19 10:54:38 <3> : Couldn't mount image boot device: /dev/mapper/loop0p1 ******************************************************************************** Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 6

[opensuse-arm] Kiwi - fat partition support missing dosfstools dep
by Guillaume Gardet 19 Nov '12

19 Nov '12

Hi Marcus, the kiwi spec file is missing a "Requires: dosfstools". Otherwise, your are not able to make FAT partition. Could you add it, please? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] KOTD builds for ARM
by Michal Marek 17 Nov '12

17 Nov '12

Hi, I enabled automatic kernel builds for ARM, on the openSUSE-12.2 and master branches. If all goes well, there should be a KOTD under http://download.opensuse.org/repositories/Kernel:/openSUSE-12.2/ARM/ starting tomorrow. Michal -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 2

[opensuse-arm] Kiwi and armv5
by Guillaume Gardet 16 Nov '12

16 Nov '12

Hi Marcus, It seems your trick to move armv5 Image to vmlinuz is not working: See: https://github.com/openSUSE/kiwi/commit/8a3bea89ea2147c89c585687846ffdf7d9e… In modules/KIWIConfig.sh: + elif [[ $arch =~ ^arm ]] && [ -f image-$VERSION ];then + mv image-$VERSION vmlinuz is KO. Because you have not to test for image-* but for Image-* (with a capital letter) During a build, I get this log: *************************************************************** mv: cannot stat 'vmlinuz-3.1.10-1.17-raspberrypi': No such file or directory (...) [ 2074s] Nov-15 14:48:06 <3> : Can't find kernel for extraction: No such file or directory (...) [ 2075s] Nov-15 14:48:07 <3> : KIWI exited with error(s) *************************************************************** Could you fix it in kiwi, and submit a fixed kiwi in OBS, please? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5

[opensuse-arm] ARM images fail
by Guillaume Gardet 15 Nov '12

15 Nov '12

Hi, ARM images fail to build because it does not find "vgs" whereas lvm2 package is installed. Any idea why? Guillaume -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 13

[opensuse-arm] 12.2 ARM: Ready for release?
by Dirk Müller 13 Nov '12

13 Nov '12

Hi, I've tested the current 12.2 images from http://download.opensuse.org/ports/armv7hl/distribution/12.2- untested/appliances/ on panda and it looks good enough for me. Are there any blockers for 12.2 final release known? if so please speak up. I'll remove the efikamx image as it hasn#t been fixed yet as far as I know,but otherwise the 12.2 RC2 image set would be released. Thanks, Dirk -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

3 5

[opensuse-arm] In case it hasn't been noticed. openSUSE:Factory:ARM fails due to nothing provides pwdutils needed by rpm-build
by Joop Boonen 12 Nov '12

12 Nov '12

Dear all, In case it hasn't been noticed. openSUSE:Factory:ARM fails due to nothing provides pwdutils needed by rpm-build Regards, Joop. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

4 8

Re: [opensuse-arm] FYI: glibc with ARM AArch64 Support
by Andreas Jaeger 11 Nov '12

11 Nov '12

Henri Gomez <henri.gomez(a)gmail.com> schrieb: >Interesting > >How did you emulate ARM Arch 64 ? > > >2012/11/11 Andreas Jaeger <aj(a)suse.com> > >> My glibc test project home:a_jaeger:devel-glibc contains the current >git >> HEAD that includes support for ARM AArch64. >> >> Once the glibc is building fine, it will go to Factory. >> >> So, just a heads up that if anybody likes to play with 64-bit ARM, >the >> glibc should be ready... >> >> Andreas >> -- >> Andreas Jaeger aj(a){suse.com,opensuse.org} Twitter/Identica: >jaegerandi >> SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany >> GF: Jeff Hawn,Jennifer Guild,Felix Imendörffer,HRB16746 (AG >Nürnberg) >> GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 >A126 >> -- >> To unsubscribe, e-mail: >opensuse-arm+unsubscribe(a)**opensuse.org<opensuse-arm%2Bunsubscribe(a)opensuse.org> >> To contact the owner, e-mail: >opensuse-arm+owner(a)opensuse.**org<opensuse-arm%2Bowner(a)opensuse.org> >> >> Not at all, this is a glibc that contains the patches as committed by linaro to upstream glibc. I didn't try cross compiling, I compile only for the normal platforms My playing was meant to be: here are the sources Andreas -- Andreas Jaeger aj(a){suse.com,novell.com,opensuse.org} Twitter / Identica: jaegerandi SUSE LINUX Products GmbH , Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) This email was sent from my phone

1 0

[opensuse-arm] FYI: glibc with ARM AArch64 Support
by Andreas Jaeger 11 Nov '12

11 Nov '12

My glibc test project home:a_jaeger:devel-glibc contains the current git HEAD that includes support for ARM AArch64. Once the glibc is building fine, it will go to Factory. So, just a heads up that if anybody likes to play with 64-bit ARM, the glibc should be ready... Andreas -- Andreas Jaeger aj(a){suse.com,opensuse.org} Twitter/Identica: jaegerandi SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn,Jennifer Guild,Felix Imendörffer,HRB16746 (AG Nürnberg) GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

1 0

[opensuse-arm] Cubox Image not working?
by Ciaran Farrell 09 Nov '12

09 Nov '12

I'm having a problem with the CuBox image referenced from http://www.solid-run.com/mw/index.php/OpenSUSE_on_CuBox - I downloaded it, extracted it and dd'd it on to the SD card. After inserting the SD card and connecting up a USB cable, I inserted the CuBox power cable. The result was that the CuBox s red LED started blinking. I had _no_ /dev/ttyUSB to connect to, so can't debug anything. The CuBox was working fine with a debian image on the same SD Card up to an hour ago - so I wonder if our 12.2 image is somehow different... Ciaran -- Ciaran Farrell, Attorney at Law SUSE Linux Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, DE GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-arm+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-arm+owner(a)opensuse.org

2 1