Mailinglist Archive: opensuse (1438 mails)

[Andre den Oudsten <AdenOudsten@xxxxxx>]

'
'David C. Rankin schreef:
> Andre den Oudsten wrote:
>   
> > I installed kernel-source, kernel-syms and Linux-kernel-headers,
> >
> > installed r3725+AR5007EG_2.6.25.5_1.1-2.2-x86_64,
> >
> > lspci -vvv offered me Kernel modules: ath_pci, ath5k
> >
> > I found
> > /lib/modules/2.6.25.18-0.2-default/updates/ath/ath_pci.ko
> >
> >
> > In Yast I could not adjust AR242x802.11 abg Wireless PCI Express Adapter
> >
> > because of missing Kernel device (eth0, wlan0)
> >
> > So far???
> > André
> >     

> > Andre
> >
> >      Good, we are getting there. On my box lspci shows my card as:
> >
> > 17:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg
> > Wireless PCI Express Adapter (rev 01)
> >
> >      Yours is the same card:
> >
> > 06:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg
> > Wireless PCI Express Adapter (rev 01)
> >
> >      I have the ath_pci.ko module at:
> >
> > /lib/modules/2.6.25.18-0.2-default/weak-updates/ath/ath_pci.ko
> >     
>       I have the following installed:
>
> 17:22 alchemy~> rpm -qa | grep madwifi
> madwifi-debuginfo-r3725+AR5007EG-2.2
> madwifi-debugsource-r3725+AR5007EG-2.2
> madwifi-r3725+AR5007EG-2.2
> madwifi-devel-r3725+AR5007EG-2.2
> madwifi-kmp-default-r3725+AR5007EG_2.6.25.5_1.1-2.2
>   
I installed them all and still in Yast I cannot configure AR242x802.11
abg Wireless PCI Express Adapter

because of missing Kernel device (eth0, wlan0),
so I can't come to the choice as you showed in your screenshot

> From Jimmy Pierre I learned

ifup wlan0 -o auto
and that reacted with
Interface wlan0 is not available

Should that be the trouble?
And how would I make that available?


André


-- 
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx