Mailinglist Archive: opensuse (1438 mails)
| < Previous | Next > |
Re: [opensuse] Installing Madwifi
- From: Andre den Oudsten <AdenOudsten@xxxxxx>
- Date: Wed, 05 Nov 2008 19:42:37 +0100
- Message-id: <4911E91D.6010705@xxxxxx>
David C. Rankin schreef:
I installed kernel-source, kernel-syms and Linux-kernel-headers,
installed r3725+AR5007EG_2.6.25.5_1.1-2.2-x86_64,
changed wpa.supplicant.conf to
network={
key_mgmt=WPA-PSK
proto=WPA
#proto=RSN
ssid="MY SSID"
psk="3bb702538fc8a11941f839ebd77b4c"
#psk=973bf4dafe65d05a4c53c169d5335dde8d70f6165cd5c82898d080b2c8a7e610
}
lspci -vvv offered me Kernel modules: ath_pci, ath5k
opensuse@xxxxxxxxxxxxxxx I found
/lib/modules/2.6.25.18-0.2-default/updates/ath/ath_pci.ko
In Yast I could not adjust AR242x802.11 abg Wireless PCI Express Adapter
because of missing Kernel device (eth0, wlan0)
For configuring a networkdevice I had the choice between User controlled with
Networkmanager and traditional method with ifup.
Under the 'Hardware' tab in Yast I could not find a 'ath_pci' module.
In Networkmanager I get with iwconfig
lo no wireless extension
eth0 no wireless extension
So far???
André
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
Andre den Oudsten wrote:
David C. Rankin schreef:
Andre den Oudsten wrote:I'm still hopefull,
David C. Rankin schreef:
Andre den Oudsten wrote:
I try to install on my laptop Aspire 5315 with openSUSE 11.0 madwifi
following the instructions of 'First Time User' HOWTO but at 'make' I get
'command not found'.
Andre,
If you have installed any madwifi rpms already, remove them. Then:
(1) Go download/install the madwifi rpms from:
André
Do you have the kernel source installed? IIRC you need the kernel source for
the post install script of the madwifi driver to build the ath_pci.ko kernel
module against. If you don't have it installed, install the kernel-source and
kernel-syms and then reinstall madwifi and I bet you have an ath_pci.ko module
after that ;-)
I installed kernel-source, kernel-syms and Linux-kernel-headers,
installed r3725+AR5007EG_2.6.25.5_1.1-2.2-x86_64,
changed wpa.supplicant.conf to
network={
key_mgmt=WPA-PSK
proto=WPA
#proto=RSN
ssid="MY SSID"
psk="3bb702538fc8a11941f839ebd77b4c"
#psk=973bf4dafe65d05a4c53c169d5335dde8d70f6165cd5c82898d080b2c8a7e610
}
lspci -vvv offered me Kernel modules: ath_pci, ath5k
opensuse@xxxxxxxxxxxxxxx I found
/lib/modules/2.6.25.18-0.2-default/updates/ath/ath_pci.ko
In Yast I could not adjust AR242x802.11 abg Wireless PCI Express Adapter
because of missing Kernel device (eth0, wlan0)
For configuring a networkdevice I had the choice between User controlled with
Networkmanager and traditional method with ifup.
Under the 'Hardware' tab in Yast I could not find a 'ath_pci' module.
In Networkmanager I get with iwconfig
lo no wireless extension
eth0 no wireless extension
So far???
André
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx
| < Previous | Next > |