Mailinglist Archive: opensuse (2995 mails)

< Previous Next >
[opensuse] Twinview works, but Mouse only available in the first of them.
  • From: Joe Mild <suse@xxxxxxxxxxxxxxxxxxxx>
  • Date: Thu, 01 Nov 2007 16:19:26 +0100
  • Message-id: <4729EE7E.6050502@xxxxxxxxxxxxxxxxxxxx>
Hi List,

i have following problem. if i configure two screens twinview or
cinerama the mouse is only availbe in the first screnn. I can't move the
cursor to the second, but if a window in the second screen has the
focus, is it possible to control the desktop via keyboard.
My version of xorg is 7.3.6.1 64Bit running on opensuse 10.3 with kde
3.5.8. I am using nvidia drivers version 64Bit 100.14.19 and here is the
current xorg.conf.

---------------------------------------------------------------------------------------------------------
Section "ServerLayout"
Identifier "Layout[all]"
Screen 0 "Screen0" RightOf "Screen1"
Screen 1 "Screen1" 0 0
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection

Section "Files"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
EndSection

Section "ServerFlags"

Option "Xinerama" "0"
Option "AllowMouseOpenFail" "on"
# Option "Xinerama" "1"
EndSection

Section "InputDevice"
Identifier "Keyboard[0]"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
Identifier "Mouse[1]"
Driver "mouse"
Option "Buttons" "10"
Option "Device" "/dev/input/mice"
Option "Name" "Razer Copperhead Laser Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Modes"
Identifier "Modes[0]"
EndSection

Section "Monitor"
Identifier "Monitor[0]"
VendorName "SGI"
ModelName "24-INCH GDM-9011"
UseModes "Modes[0]"
DisplaySize 517 323
HorizSync 30.0 - 121.0
VertRefresh 48.0 - 160.0
Option "CalcAlgorithm" "XServerPool"
Option "DPMS"
EndSection

Section "Monitor"

# 1920x1200 @ 85.00 Hz (GTF) hsync: 107.10 kHz; pclk: 282.74 MHz
Identifier "Monitor1"
VendorName "Unknown"
ModelName "CRT-1"
HorizSync 30.0 - 121.0
VertRefresh 48.0 - 160.0
ModeLine "1920x1200_85.00" 282.7 1920 2072 2280 2640 1200 1201
1204 1260 -hsync +vsync
ModeLine "2304x1440_80.00" 383.9 2304 2488 2744 3184 1440 1441
1444 1507 -hsync +vsync
EndSection

Section "Monitor"

# 1920x1200 @ 85.00 Hz (GTF) hsync: 107.10 kHz; pclk: 282.74 MHz
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Silicon Graphics GDM-FW9011"
HorizSync 30.0 - 121.0
VertRefresh 48.0 - 160.0
ModeLine "1920x1200_85.00" 282.7 1920 2072 2280 2640 1200 1201
1204 1260 -hsync +vsync
ModeLine "2304x1440_80.00" 383.9 2304 2488 2744 3184 1440 1441
1444 1507 -hsync +vsync
EndSection

Section "Device"
Identifier "Device[0]"
Driver "nvidia"
VendorName "VESA"
BoardName "Framebuffer Graphics"
Option "SaXDualHead"
Option "TwinView"
Option "SaXDualMonitorVendor" "SGI"
Option "SaXDualOrientation" "LeftOf"
Option "MetaModes"
"1400x1050,1920x1200;1280x1024,1280x1024;1280x960,1280x960;1366x768,1366x768;1280x800,1280x800;1152x864,1152x864;1280x768,1280x768;1024x768,1024x768;1280x600,1280x600;1024x600,1024x600;800x600,800x600;768x576,768x576;640x480,640x480"
Option "SaXDualResolution" "1920x1200"
Option "TwinViewOrientation" "LeftOf"
Option "SaXDualMode" "Xinerama"
Option "SecondMonitorVertRefresh" "48-160"
Option "SaXDualHSync" "30-121"
Option "SaXDualMonitorModel" "24-INCH GDM-90W11"
Option "SaXDualVSync" "48-160"
BusID "1:0:0"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7950 GT"
BusID "PCI:1:0:0"
Screen 0
EndSection

Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7950 GT"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "2304x1440" "1920x1200" "1400x1050" "1280x1024"
"1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768"
"1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "2304x1440" "1920x1200" "1400x1050" "1280x1024"
"1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768"
"1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "2304x1440" "1920x1200" "1400x1050" "1280x1024"
"1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768"
"1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "2304x1440" "1920x1200" "1400x1050" "1280x1024"
"1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768"
"1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Videocard0"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "CRT-1: 2304x1440_80 +0+0; CRT-1:
1920x1200_85 +0+0; CRT-1: 1600x1200_75 +0+0; CRT-1: 1280x960 +0+0;
CRT-1: 1152x864 +0+0; CRT-1: 1024x768 +0+0; CRT-1: 800x600 +0+0; CRT-1:
640x480 +0+0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard1"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "CRT-0: 2304x1440_80 +0+0; CRT-0:
1920x1200_85 +0+0; CRT-0: 1600x1200_75 +0+0; CRT-0: 1280x1024 +0+0;
CRT-0: 1280x960 +0+0; CRT-0: 1152x864 +0+0; CRT-0: 1024x768 +0+0; CRT-0:
800x600 +0+0; CRT-0: 640x480 +0+0"
EndSection
-------------------------------------------------------------------------------------------------------------------------------

any suggestions?

cu Joe
--
To unsubscribe, e-mail: opensuse+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx

< Previous Next >
This Thread
  • No further messages