Mailinglist Archive: opensuse-factory (1165 mails)

[Christoph Thiel <cthiel@xxxxxxx>]

On Wed, Nov 01, 2006 at 11:48:33PM +0200, Viljo Mustonen wrote:

> I have Compaq Evo W4000 workstation with LG GSA-4167B
> DVD-writer as master and LITEON LTR-40125S CD-writer
> as slave at secondary IDE bus. Both devices works well
> with openSuse 10.1 and W2k. Boot time is about 1 minute.
> 
> With openSuse 10.2 beta 1 here is problems. LITEON does
> not work. LG mostly reads but not writes properly,auto
> mount often does not work.Boot time to login screen is
> very long, between 2 minutes 40 seconds and nearly
> 5 minutes.
> 
> Boot.msg:s typically contains lines:
> 
> <6>scsi1 : ata_piix
> <6>ata2.00: ATAPI, max UDMA/33
> <6>ata2.01: ATAPI, max UDMA/33
> <6>ata2.00: configured for UDMA/33
> <4>ata2.01: qc timeout (cmd 0xef)
> <3>ata2.01: failed to set xfermode (err_mask=0x4)
> <4>ata2.01: limiting speed to UDMA/25
> <4>ata2: failed to recover some devices, retrying in 5 secs
> <6>ata2.00: configured for UDMA/33
> <4>ata2.01: qc timeout (cmd 0xef)
> <3>ata2.01: failed to set xfermode (err_mask=0x4)
> <4>ata2.01: limiting speed to PIO0
> <4>ata2: failed to recover some devices, retrying in 5 secs
> <6>ata2.00: configured for UDMA/33
> <4>ata2.01: qc timeout (cmd 0xef)
> <3>ata2.01: failed to set xfermode (err_mask=0x4)
> <4>ata2.01: disabled
> <4>ata2: failed to recover some devices, retrying in 5 secs
> <3>ata2.00: failed to set xfermode (err_mask=0x40)
> <4>ata2.00: limiting speed to UDMA/25
> <4>ata2: failed to recover some devices, retrying in 5 secs
> <6>ata2.00: configured for UDMA/25
> 
> Often three times more same kinds of lines.

Those should be gone with Beta2. Please report a bug, in case you still find
them in Beta2 (which is due next week).


Best,
Christoph
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx