Mailinglist Archive: opensuse-es (1047 mails)

["Juan Erbes" <jerbes@xxxxxxxxx>]

2008/2/28, R RA <ricardoramon76@xxxxxxxxxxx>:
>  MUCHAS GRACIAS.
>  El enlace que proporciona dice que " Install bcm43xx-fwcutter from DVD or 
> OSS-repo and run the included script: install_bcm43xx_firmware".
>  ¿Cómo se hace esto con peras y manzanas ?
>
>  Disculpar el descaro de las preguntas.... pero en los inicios es mejor no 
> andar por las ramas.


Te copio una respuesta que mande hace unos dias. Te iva a decir que
busques en el archivo de la lista, pero te perdono por ser nuevo:

Te falta instalar el firmware:
http://www.suseforums.net/index.php?s=846102308ab4829d4fbae8ebfb8062c7&showtopic=39622
1. You need to check if the bcm43xx-fwcutter package is installed
through: Yast > Software > Software Installation and search for
bcm43xx-fwcutter

2. Find the windows driver for your wireless chip. An example windows
driver was titled bcmwl5.sys Also note if you can't find yours try
doing a google search for wl_apsta.o (SUSE worked with both the
orginal windows driver and the wl_apsta.o at the time of this WIKI
post). Put the driver file on your desktop in SUSE.

3. Start the shell console (Kmenu >System > Terminal Program >
Terminal) and login as root with the command:

sux -

and type in the root password

Extract your firmware files from your wireless chip and store them in
the firmware file by typing in the following. (Note: Swap out the name
of your driver accordingly...in this example it is dirver.sty):

bcm43xx-fwcutter -w /lib/firmware ~/Desktop/driver.sty

4. Another way to install the firmware is using the install script
included in the bcm43xx-fwcutter package. You need to have a working
internet connection for this as it is attempted to download
driver.sty, next the firmware is extracted and stored in
/lib/firmware.

install_bcm43xx_firmware

5. Now that the firmware is ready for the driver to use, load the
module by typing the following:

modprobe bcm43xx

6. Reboot and now you can configure your WLAN card through YAST >
Network devices > Network card


La persona a quien le respondi hizo los pasos 4 en adelante y le funcionó
4- Instalar el paquete bcm43xx-fwcutter
 Como root o su ejecutar
install_bcm43xx_firmware

5- Como root o su ejecutar
modprobe bcm43xx

6- Reiniciar y configurar el dispositivo a traves de Yast > Dispositivos de Red


Salu2
---------------------------------------------------------------------
Para dar de baja la suscripción, mande un mensaje a:
   opensuse-es+unsubscribe@xxxxxxxxxxxx
Para obtener el resto de direcciones-comando, mande
un mensaje a:
   opensuse-es+help@xxxxxxxxxxxx