- openSUSE Support

opensuse slowroll, zypper ref: signature verification failed for: repomd.xml from repository update,
by cagsm 15 Apr '24

15 Apr '24

Support, just right now, fired up slowroll machine. opensuse slowroll, zypper ref: signature verification failed for: repomd.xml from repository update, online multiple times, firefox-browsed that /update/slowroll/repo/oss/repodata/ and I do find some xml asc and key files in there they all load and seem legit but apparently still some signature or composition of those files dont match or are not properly cryptoed. repository: update ..... rsa4096 key created: ... 20 june 2022 key expires: .... 19 june 2026 thanks for fixing

3 5

Using anaconda
by Dave Howorth 13 Apr '24

13 Apr '24

Apologies if this is a poor place to ask ... A while ago I used anaconda to install a python environment for a particular program I was using. Then I stopped using it, and I've subsequently rebooted the system. I now want to re-run the same program but I can't figure out how to reactivate the same python environment to run it in. I stupidly apear to have taken no notes at the time :( Can anybody point me to a better place to ask, or to an online resource that explains (for a simple idiot) how to reactivate an environment using conda or whatever?

2 1

How to unsubscribe this mailing list?
by DU Haoran 13 Apr '24

13 Apr '24

Hi everyone, I would like to unsubscribe this mailing list. Can anyone give me some instructions? Yours, Haoran

3 3

1-What determines whether dracut creates an "early CPIO" image? 2-how to compare initrds?
by Felix Miata 13 Apr '24

13 Apr '24

I have two TW20240410 installations on the same HDD. One has a boot malady that is solved if I use the other's initrd. This holds for the past several installed kernel versions. The difference in size between the two for a selected kernel version installed to both is 111,428 bytes, with the larger being the one that works correctly. After using lsinitrd on both redirected to files I used diff on those two files, redirected to another file. The diff output file is 138k, useless for the intended purpose. I have determined from the diff that the one that doesn't work is an "Early CPIO image". The bad initrd with "Early CPIO" contains 12288 GenuineIntel.bin, which the good does not. Both installations have identical content in /etc/dracut.d/. 1-What controls whether an initrd is an "Early CPIO image"? 2-How can I determine what is apparently absent from the smaller of the two initrds? -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

2 1

15.5, wireguard, resolve-dns.sh script not available? not needed anymore?
by cagsm 12 Apr '24

12 Apr '24

Support, a very simple 15.5 with wireguard, dynamic chaning public ipv4 addresses as endpoint hostname:port i am rather new to this, yet I am not aware if this script for tackling this situation > <https://github.com/WireGuard/wireguard-tools/blob/master/contrib/reresolve-…> is still part of the whole deal, as the wireguard-tools package rpm, does not list this file as its content on leap 15.5 is this deprecated? as maybe > <https://github.com/WireGuard/wireguard-monolithic-historical/blob/master/co…> hints? or whatever that state there means? I have just set up my wireguard with two peers total, so I will see within the next hours or days or so if this tunnel survives dns (ip) changes of the public ipv4 address (endpoint) and how this works. any experience with this on opensuse current versions? ----------- rpm -qi wireguard-tools --filesbypkg .... wireguard-tools /etc/wireguard wireguard-tools /usr/bin/wg wireguard-tools /usr/bin/wg-quick wireguard-tools /usr/lib/systemd/system/wg-quick.target wireguard-tools /usr/lib/systemd/system/wg-quick@.service wireguard-tools /usr/share/bash-completion/completions/wg wireguard-tools /usr/share/bash-completion/completions/wg-quick wireguard-tools /usr/share/doc/packages/wireguard-tools wireguard-tools /usr/share/doc/packages/wireguard-tools/README.md wireguard-tools /usr/share/licenses/wireguard-tools wireguard-tools /usr/share/licenses/wireguard-tools/COPYING wireguard-tools /usr/share/man/man8/wg-quick.8.gz wireguard-tools /usr/share/man/man8/wg.8.gz ------------- ty

3 15

PackageKit
by Ianseeks 12 Apr '24

12 Apr '24

Hi Is packagekit needed on tumbleweed? Since the upgrade to plasma 6, it runs as soon as I log in, where can i turn it off because I can't do a zypper dup until its finished. I can't find any reference to it in yast (cron) or systemsettings? Not had any emails for a few days now, is the system down? regards Ian openSUSE Tumbleweed 20240404 kwin 6.0.3 kmail2 6.0.1 (24.02.1) - akonadiserver 6.0.1 (24.02.1) - Kernel: 6.8.2-1- default - kernel-firmware-radeon 20240322

6 7

Problem with nvidia module?!
by Jörn Dreyer 12 Apr '24

12 Apr '24

Hello, since the last weekend i'm experiencing problems with my laptop that has an NVIDIA 1650 Ti together with an integrated AMD Radeon RX 6. The systems starts up normaly after a power cycle. I can login but now the problems start: 1) The start of the graphical desktop (KDE) is very slow. It takes about 2 minutes. 2) Only the internal screen comes up, the external monitor goes into power saving mode. 3) Sometimes the mouse moves very slowly, so the system is unusable. The last day's it helped to reinstall the nvidia driver but today this did not solve the problem. In the log file I found errors like this: [[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Failed to apply atomic modeset. Error code: -22 [[drm:nv_drm_atomic_commit [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Flip event timeout on head 0 After the last update I run rpmconfigcheck and fixed the outstanding changes. But the problem did not go away. Did anybody observe similar problems? Regards Jörn

1 1

Why?: zypper "Will try to download it." for a package on the / filesystem
by Felix Miata 10 Apr '24

10 Apr '24

EXAMPLE scenario: # ll total 574 drwxrwxr-x 2 root root 1024 Apr 9 21:13 . drwx------ 23 root root 6144 Apr 9 21:11 .. -rw-rw-r-- 1 moz vtt 579202 Mar 19 21:56 filecommander-2.50-vgit_1842_tumbleweed.x86_64.rpm # inxi -S System: Host: p5bse Kernel: 6.6.24-1-longterm arch: x86_64 bits: 64 Console: pty pts/0 Distro: openSUSE Tumbleweed 20240407 # zypper -v --no-refresh in ./filecommander-2.50-vgit_1842_tumbleweed.x86_64.rpm Autorefresh disabled. Verbosity: 2 Non-option program arguments: './filecommander-2.50-vgit_1842_tumbleweed.x86_64.rpm' './filecommander-2.50-vgit_1842_tumbleweed.x86_64.rpm' looks like an RPM file. Will try to download it. Initializing Target Loading repository data... Reading installed packages... Selecting 'filecommander-2.50-vgit_1842_tumbleweed.x86_64' from repository 'Plain RPM files cache' for installation. Resolving package dependencies... Force resolution: No The following package is going to be upgraded: filecommander 2.50-vgit_1829_tumbleweed -> 2.50-vgit_1842_tumbleweed 1 package to upgrade. Overall download size: 565.6 KiB. Already cached: 0 B. After the operation, additional 8.3 KiB will be used. Backend: classic_rpmtrans Continue? [y/n/v/...? shows all options] (y): n # Why does zypper "download" a package on the / filesystem before installing it? Does it really "download" it? If so, what does "download" mean to a zypper transaction? Would the answer differ if the rpm is on an nfs mount? Can one configure a repo pointing to . to dispense with this apparently inexplicable activity? Is this a bug? -- Evolution as taught in public schools is, like religion, based on faith, not based on science. Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata

2 2

symbol lookup error in fwupdmgr something so... tumbleweed slowroll update
by cagsm 08 Apr '24

08 Apr '24

Support, just updated a tumbleweed slowroll machine, and now fwupmgr shows a symbol lookup error in /ib64/libfwupd.so.2 - undefined symbol: g_once_init_leave_pointer fwupd: 1.9.15 release 1.1.3.1 fwupd has been installed in the end of march, but fwupd-efi and fwupd-bash-completion has been updated installed today. fwupdate just worked fine (refresh) just a moment ago before i zypper dup to the latest slowroll and rebooted thereafter. ty

4 10

Anything changed in rules for nft?
by Freek de Kruijf 05 Apr '24

05 Apr '24

I have my own set of nft rules for a special purpose. This set worked perfect since 2021. However today I am using the newest Tumbleweed and I get error messages when starting this set with nft. The set is: add table ip filter add chain ip filter INPUT { type filter hook input priority 0; policy drop; } add chain ip filter FORWARD { type filter hook forward priority 0; policy drop; } add chain ip filter OUTPUT { type filter hook output priority 0; policy accept; } add chain ip filter reject_func add rule ip filter INPUT iifname "lo" counter accept add rule ip filter INPUT ct state established counter accept add rule ip filter INPUT ip protocol icmp ct state related counter accept add rule ip filter INPUT udp dport 5353 pkttype multicast counter accept add rule ip filter OUTPUT oifname "lo" counter accept add rule ip filter reject_func ip protocol tcp counter reject with tcp reset add rule ip filter reject_func ip protocol udp counter reject add rule ip filter reject_func counter reject with icmp type prot-unreachable The error message is: /etc/network/ruleset-init.nft:8:26-33: Error: Could not process rule: No such file or directory add rule ip filter INPUT ct state established counter accept ^^^^^^^^ /etc/network/ruleset-init.nft:9:43-50: Error: Could not process rule: No such file or directory add rule ip filter INPUT ip protocol icmp ct state related counter accept ^^^^^^^^ Are there any changes in the syntax of nft rules? -- fr.gr. member openSUSE Freek de Kruijf

2 3