May 2021 - openSUSE Factory - openSUSE Mailing Lists

Re: nVidia graphics repository out of sync?
by Michael Hamilton 05 May '21

05 May '21

On Monday 03 May 2021, J. Merkel wrote: > Hi Michael, Andrei > > thanks for your swift responses! > One correction: I mentioned the wrong kernel version - its 5.11.15 for build > 20210425. > > Michael - I've tried your suggestion but it failed complaining about a "mismatch" in > nvidia-gfxG05-kmp-default-460.73.01_k5.11.11_1-37.1.x86_64.rpm [1](The file I've > tee'd the output to got overwritten so regrettably I can't provide more details, grmbl) > The kernel source install for 5.11.15 looked OK to me. > > Your comment and Andrei's point stating the nvidia modules are compiled made me > try to update to the latest available build 20210429 which employs kernel 5.12.0. > (Not knowing much about the "nvidia issue" I assumed nvidia are trying to keep > some stuff from others looking into, thus forcing download of some pre-complied > objects rather than to compile in situ) > > After the change to 5.12.0 all is fine again, I'm writing this mail on the system. > > One observation: > I was following the update closely (which I usually don't do ;-)) and was concerned > when I saw: > > ------------------------------------------------------------------------------------------------------------ > > .......BTF [M] /usr/src/kernel-modules/nvidia-460.73.01-default/nvidia.ko > Skipping BTF generation for /usr/src/kernel-modules/nvidia-460.73.01-default/ > nvidia.ko due to unavailability of vmlinux > make[2]: Verzeichnis „/usr/src/linux-5.12.0-1-obj/x86_64/default“ wird verlassen > make[1]: Leaving directory '/usr/src/linux-5.12.0-1' > ld -r -o nv-linux.o \ > nvidia.mod.o nvidia/nv-interface.o > ld: cannot find nvidia/nv-interface.o: No such file or directory > make: *** [Makefile:113: nv-linux.o] Error 1 > / > depmod: WARNING: could not open modules.order at /lib/modules/5.12.0-1-default: > No such file or directory > depmod: WARNING: could not open modules.builtin at /lib/modules/5.12.0-1- > default: No such file or directory > > Modprobe blacklist files have been created at /etc/modprobe.d to prevent Nouveau > from loading. This can be reverted by deleting /etc/modprobe.d/nvidia-*.conf. > > *** Reboot your computer and verify that the NVIDIA graphics driver can be loaded. > *** > > grep: /etc/sysconfig/kernel: No such file or directory > warning: %triggerin(nvidia-gfxG05-kmp-default-460.73.01_k5.11.11_1-37.1.x86_64) > scriptlet failed, exit status 1 > > ........ > --------------------------------------------------------------------------------------------------------------- > > Any idea whether this could turn into something serious or can it be ignored? > > br > > Juergen > If I grep /var/log/zypp/history for the above errors I can find all of them from various past updates all the way back to kernel 5.7.7-1-default. I'm not sure whether any of them are associated with past nvidia update issues. I've certainly not been paying any attention to them. In the past should an update cause my desktop to fail to boot to the sddm login screen, I have most often tried a forced reinstall of everything currently installed from the nvidia repo. More recently I have just tried rebuilding the module after someone here suggested that this was all that is necessary - perhaps that is insufficient in some cases, I'm not sure. Force reinstalls have often done the trick. Otherwise I just set my system to boot to the previous kernel - I don't think that has ever failed. I then raise an issue here, and wait for some suggestions or explanation. Often the explanation is along the lines the kernel API's have been changed and we're waiting for nvidia to catchup. It isn't essential that my desktop runs the very latest kernel, so this works fine for me. Michael

1 0

nVidia graphics repository out of sync?
by Mailings 05 May '21

05 May '21

Hi updated Tumbleweed a few days ago to build 20210425. Reboot ended in a command prompt rather than firing up KDE. Using Kernel 5.11.4 made it work again. Spent some time today in figuring out what the problem is and it seems the nVidia repository is out of sync - the kernel used there is still at 5.11.11 rather than 5.11.16. br Juergen

7 11

Who is in charge of Leap 15.3 initial configuration?
by Larry Finger 05 May '21

05 May '21

Could anyone tell me who is in charge of handling the initial configuration of Leap 15.3. As reported in bsc#1183125, an installation of Leap 15.3 in a VirtualBox VM does not install virtualbox-guest-x11 or virtualbox-guest-tools, and only suggests virtualbox-kmp-default. This behavior differs from that of previous versions which detected that the installation was under VirtualBox and installed these 3 additional packages. Thanks, Larry

11 14

openSUSE Release Engineering Meeting 17.3.2021
by Lubos Kocman 05 May '21

05 May '21

All meeting minutes can be found here: https://etherpad.opensuse.org/p/ReleaseEngineering-meeting ## Participants dleuenberger, ddemaio, rbrown, skriesch, guillaumeg, lkocman, wengel, maxlin, sbahling, gp !!! Please be aware that this meeting is hosted on https://meet.opensuse.org/ReleaseEngineeringMeeting ## Leap <-- I believe a heading is missing here: 20 of 7 .. of what? x86_64 20/7 i586 0/0 aarch64 74/10 armv7 117/99 ppc64le 119/115 s390x 163/625 Agreement is to have 0 on intel, and hopefully aarch64. Everything else should be as good as it can get. https://progress.opensuse.org/issues/76348 Current blocker for publishing further updates: https://bugzilla.opensuse.org/show_bug.cgi?id=1183073 <- should be fixed? packman - debuginfo / debugsource, inode.at mirror is broken Discussion about SUMA-23 (cobbler + pulp repo as a lightweight RMT alternative community feature request). Depends on libmodulemd and librepo ECOs. So far we've agreed to do these. SUMA team will reach out to me again in 3 weeks. ## openSUSE Tumbleweed * grub2 with boothole v2 fixes was released for TW in snapshot 0315 * glibc 2.33 / i586 fix was confirmed by users. A full rebuild of the snapshot was published, which brought the download infra close to the ground again. * SELinux enabling during the installation phase; default is switched to 'disabled', as I'm not happy with the UX (two reboots post install) * GNOME 40.beta is ready in the GNOME:Next repo (UI changes, dock now at the bottom; TW will see it end in March/April timeframe if nothing bad comes up) * GCC 11 as the default compiler is being tested in a Staging ## Richard (Kubic/TW MicroOS) Preparing for MicroOS Desktop for Hackweek https://hackweek.suse.com/20/projects/microos-desktop SELinux tests under review ## Max * We're free from Beta blocker (boo#1182776, bsc#1182891) * noarch packages issue (bsc#1181832, bsc#1183097) * Another 000package-groups change against sles-release for fix zypper dup from Leap 15.3 to SLE15 SP3 bsc#1181829 ## Guillaume - Arm Tumbleweed: * Bug with grub/shim on aarch64 fixed: https://bugzilla.suse.com/show_bug.cgi?id=1183213 * New bug with kiwi: MicroOS images are unbootable: https://bugzilla.opensuse.org/show_bug.cgi?id=1183635 * Evaluating the option to enable in-kernel Memory Tagging Extension (MTE) support via KASAN for aarch64 in kernel-debug. E-mail sent to openSUSE kernel mailing list to get some feedback in parallel to my tests. Leap 15.3 ARM: * aarch64: Bug in grub/shim fixed: https://bugzilla.suse.com/show_bug.cgi?id=1182776 * Armv7: * initial openQA setup done : https://openqa.opensuse.org/tests/overview?distri=opensuse&version=15.3&bui… * armv7 NET ISO is now bootable but grub has no theme and it hangs at 'Hardware detection' WSL: Stalled: WIP to have WSL on aarch64 on https://build.opensuse.org/project/show/home:Guillaume_G:WSL The goal is to have WSL-DistroLauncher package built for aarch64. Help welcomed. SUSE is currently interviewing candidates for the WSL Engineering post. So far Jeff is still the only person working on the Engineering efforts (native kiwi support, and some current WSL build blockers on SLE). Lubos is currently considering a hackweek project for WSL / aarch64. This is currently the plan. ## Michel ppc64le Not available ## Sarah - s390x * new Tumbleweed builds * Leap 15.3 test issue because of SLE test dependency: https://progress.opensuse.org/issues/81685 Lubos: Contact Ihno Kumreich for any questions for s390x/SLE Engineering. I can try to help as well. ## Doug * Leap 15.3 * Still - https://en.opensuse.org/In_the_press_15.3 * Beta t-shirts still coming in * openSUSE Conference (June 18 - 20) * Have access to tool opensuse.venueless.events * GSoC Mentor Org * Is anyone interested in mentoring rpmlint * Shells status * Lifecycle discussion ## Dirk Focused on remaining bootstrap tasks (ghc, fpc, ...), work in progress Backports still has a lot of failures (also on x86_64) Step: Still a lot of unsolved issues (e.g. requirements on sles- release, but sles-release disabled for non-SLE architectures) ## Gerald Based on report on the project@ list: can we see to spread out Beta/RC releases of Leap and larger Tumbleweed snapshots as not to overload mirrors? Lubos indicated he'd look into that with Dominique. ## Wolfgang (Package Hub), Scott Bahling no update ## Adrian - CtLG or openSUSE Step RISC-V/TW is not represented on this call. We still don't know how to release ftp-tree for armv7. Lubos: https://github.com/openSUSE/get-o-o/issues/34

5 6

openSUSE Release Engineering Meeting 05.05.2021
by Lubos Kocman 05 May '21

05 May '21

This is a backup etherpad as we can't really use etherpad.opensuse.org because of https://progress.opensuse.org/issues/90230 All meeting minutes can be found here: https://etherpad.opensuse.org/p/ReleaseEngineering-meeting ## Participants dleuenberger,guillaume_g, bittin, lkocman, rbrown, adrian, ddemaio, gp, maxlin, dirk !!! Please be aware that this meeting is hosted on https://meet.opensuse.org/ReleaseEngineeringMeeting ## Leap rpm update 4.14.1 -> 4.14.3 will be released as maintenance update prior or with GA timing https://jira.suse.com/browse/OPENSUSE-23 Spoke to marketing team regarding ARMv7 related announcements frontrunner + the actual armv7 availability. Recommendation from Gerald during our Leap Testing (now frontrunner) meeting. GM is currently scheduled for 21st May. GA then on 2nd June. Dimstar's maint SR for 15.3 was rejected. Lubos will look into todo: Boothole (2) Leap 15.2 image-respin ## openSUSE Tumbleweed Some new snapshots releases * GNOME 40.1 is in Staging, almost ready * Plasma 5.21.5 submitted for staging just this morning * UsrMerge is 'ready' as per staging project; See https://lists.opensuse.org/archives/list/factory@lists.opensuse.org/thread/… for information how to test (careful: once added, there is no plan to opt out again) * GCC 11 as the default compiler is being tested in Staging:N; a few more build failures to address ## Richard (Kubic/TW MicroOS) Go1.16 as default (and other golang-related updates, eg helm) blocked by https://build.opensuse.org/request/show/882556 - JeffK and I would appreciate any contributions to get cilium building with Go1.16 Kubernetes 1.21 and updates for 1.18, 1.19 and 1.20 all released Experiments started on a MicroOS build optimised for Rancher use cases MicroOS Desktop (GNOME) Beta has been released, some pattern tuning identified before it can be considered production ready. Improvements to firstboot wizard otw to make it more resiliant to complex network arrangements. Talks about MicroOS Desktop (GNOME) and Rancher-optimised Kubic submitted to oSC ## Max * Forked llvm meta package in Leap 15.3(actually did in Backports proejct) bsc#1179155, bsc#1184920, JIRA#SLE-17825, the effecting package also fixed * Multiple keys have to be loaded for rpm verification while zypper dup, merged instsource-susedata and product-builder plugin, on the latest Leap build that gpgkey was listed in the repomd.xml/tags/content * Integrated openSUSE-signkey-cert to Leap 15.3, a helper package for loading openSUSE built KMPs * Entering the RC phase llvm is now treated as a "system configuration package" so we rebuild it just like other branding packages. However this one is forked in Backports unlike rest of system-config/branding packages which live in openSUSE:Leap:15.3 Lubos: Max sees some mass rebuilds after entering the RC phase due to SLE Updates change We need to stop mass-rebuilds of Backports:15.3 because of random SLE- 15:Updates. SLE 15 SP3 does not take any new updates since Monday 3rd May. Max: Options can be 1) switch to leap-15.3 snapshot repo 2) set a date then just freeze Backports project Adrian: if Backports would build against Leap 15.3 snapshot, then we'd have fix point. Adrian: at the same point in time we'd freeze Leap 15.3 and Backports. For Update projects that's different but for 15.3 GA there would be no changes. ## Guillaume - Arm Tumbleweed: * Rolling again Leap 15.3 ARM: * aarch64: * Still need to fix envoy-proxy (OOM) * Still not able to build locally (osc build --vm-type=kvm) for aarch64 with a Tumbleweed host. https://bugzilla.opensuse.org/show_bug.cgi?id=1183653 * Armv7: * NET ISO still hangs in linuxrc (in hardware detection): https://bugzilla.opensuse.org/show_bug.cgi?id=1183795 dirk may have a fix * No publish area yet. http://download.opensuse.org/ports/armv7hl/distribution/leap/15.3/ would be consistent with previous Leap releases. lkocman: There we've agreed that Adrian will publish it to ports. Correct Adrian? Adrian: confirms that this is solved, but he needs to ensure that product name refers to ports. I will setup publishing later this day to the ports repository. More Aarch64/ARM7 build hosts is on its way * Also need to move JeOS to :15.3:ARM:Images project at some point. WSL: New hire Scott started last week. and getting used to OpenQA and such WSL: Stalled: WIP to have WSL on aarch64 on https://build.opensuse.org/project/show/home:Guillaume_G:WSL The goal is to have WSL-DistroLauncher package built for aarch64. Help welcomed. SUSE is currently interviewing candidates for the WSL Engineering post. So far Jeff is still the only person working on the Engineering efforts (native kiwi support, and some current WSL build blockers on SLE). Lubos is currently considering a hackweek project for WSL / aarch64. This is currently the plan. ## Michel ppc64le Not available ## Sarah - s390x Not available. * opensuse-build-key did not build for Tumbleweed because of wrong key (fixed): new snapshots available * lightdm failed to start during test after being connected via VNC ( https://bugzilla.suse.com/show_bug.cgi?id=1185107 ) ## Doug * Leap 15.3 * Release announcement being translated - https://en.opensuse.org/Release_announcement_15.3 * openSUSE Conference (June 18 - 20) * Had Meeting (every Tuesday at 18:00 UTC on meet.o.o. & discord) * Had video team meeting last Friday and this Friday - https://meet.opensuse.org/bar * CfP closed: Submissions 47, 28 hours, 3 withdrawals * Recommended to have people record talks rather than live, but live is an option. * Will approve talks and send out emails and need response from those who want to do live and those who will provide a recording. (Q&A will be done in after the talk finishes playing in the platforms BBB) * working on video upload option (will likely use ocloud.de) * Added sponsors datto and working on sponsorship with almalinux * Working on separate announcements for frontrunner and armv7 * Sprint tomorrow meet.opensuse.org/websprints (might move to bar) ## Dirk Focus on armv6/v7 build failure fixes on Tumbleweed (nodejs, various pandoc) Found and fixed stale frozenlink on Step:15-SP1 Leap 15.3/armv7 still has too many build failures, no time to address this week Setup a Step 15-SP4 project that rebuilds all SLE layers in one project with reproducible-build flags enabled Fallout is very high (149 failures), to be analyzed and fixed. (x86_64 only) Dirk: I'd really appreciate some help to get this down to a manageable number such as 20 or so. ## Gerald Wonders why/whether minutes of this meeting are not sent to SUSE- internal lists any longer? Lubos: Not actually changed. This is most likely mail deduplication happening, since he sends as one mail, using Bcc, so the mail has a single Message-ID. ## Wolfgang (Package Hub), Scott Bahling team off-site today The move of the packages to subpackages is done. They are published. ## Ludwig Not available ## Adrian - CtLG or openSUSE Step No update today. Leap 15.3 GA is scheduled for 2nd June. ftp-publishing for armv7/ports, could be set up today. Guillaume and Dirk agree to release the build. However we want to wait for announcement until we have a working ARMv7 build. Discussions about OpenSUSE 15.2 Leap (Boothole 2 Respin). Lubos: let's use respin as part of the subproject name. Lubos to create subproject, and will update the existing mailing list thread.

1 0

YaST: highlights of development sprint 122
by Ancor Gonzalez Sosa 04 May '21

04 May '21

The YaST Team invested a significant part of the latest development sprint reorganizing some of the YaST internals. An effort that hopefully will pay off in the mid term and that affects topics like: - Management of local users, specially during installation. - Unification of the code for configuring the network. - Error handling and reporting. - Reorganization of our UI toolkit. Check the whole report at: https://yast.opensuse.org/blog/2021-05-03/sprint-122 Cheers. -- Ancor González Sosa YaST Team at SUSE Linux GmbH

1 0

New Tumbleweed snapshot 20210502 released!
by Dominique Leuenberger 03 May '21

03 May '21

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: apache2-mod_php7 (7.4.16 -> 7.4.18) autofs (5.1.6 -> 5.1.7) bind coreutils graphviz graphviz-addons iproute2 (5.11 -> 5.12) kernel-source libical (3.0.9 -> 3.0.10) libical-glib (3.0.9 -> 3.0.10) libinput (1.17.1 -> 1.17.2) libzypp (17.25.9 -> 17.25.10) nano (5.6.1 -> 5.7) open-iscsi php7 (7.4.16 -> 7.4.18) python38 (3.8.8 -> 3.8.9) python38-core (3.8.8 -> 3.8.9) python38-documentation (3.8.8 -> 3.8.9) samba (4.14.2+git.159.2a8872214bf -> 4.14.4+git.162.18fd73a39a0) snapper virt-bootstrap xorgproto (2021.3 -> 2021.4) yast2-add-on (4.3.8 -> 4.4.0) yast2-apparmor (4.3.1 -> 4.4.0) yast2-auth-client (4.3.2 -> 4.4.0) yast2-auth-server (4.2.5 -> 4.4.0) yast2-configuration-management (4.3.5 -> 4.4.0) yast2-control-center (4.3.0 -> 4.4.0) yast2-core (4.3.3 -> 4.4.0) yast2-dns-server (4.3.3 -> 4.4.0) yast2-firewall (4.3.11 -> 4.4.0) yast2-firstboot (4.3.11 -> 4.4.0) yast2-ftp-server (4.3.2 -> 4.4.0) yast2-hardware-detection (4.1.2 -> 4.4.0) yast2-journal (4.3.0 -> 4.4.0) yast2-kdump (4.3.4 -> 4.4.0) yast2-mail (4.3.3 -> 4.4.0) yast2-nfs-client (4.3.3 -> 4.4.0) yast2-nfs-server (4.3.2 -> 4.4.0) yast2-nis-server (4.3.1 -> 4.4.0) yast2-ntp-client (4.3.2 -> 4.4.0) yast2-online-update (4.2.2 -> 4.4.0) yast2-pam (4.3.4 -> 4.4.0) yast2-perl-bindings (4.3.0 -> 4.4.0) yast2-proxy (4.3.2 -> 4.4.0) yast2-python-bindings (4.1.4 -> 4.4.0) yast2-samba-server (4.3.4 -> 4.4.0) yast2-security (4.3.16 -> 4.4.0) yast2-services-manager (4.3.6 -> 4.4.0) yast2-slp (4.1.1 -> 4.4.0) yast2-sound (4.3.3 -> 4.4.0) yast2-storage-ng (4.3.50 -> 4.4.0) yast2-sysconfig (4.3.3 -> 4.4.0) yast2-tftp-server (4.3.1 -> 4.4.0) yast2-theme (4.3.8 -> 4.4.0) yast2-update (4.3.2 -> 4.4.0) yast2-xml (4.1.1 -> 4.4.0) yast2-ycp-ui-bindings (4.3.9 -> 4.4.0) zypper (1.14.43 -> 1.14.44) === Details === ==== apache2-mod_php7 ==== Version update (7.4.16 -> 7.4.18) - updated to 7.4.18: This is a security bug fix release. See https://www.php.net/ChangeLog-7.php#7.4.18 ==== autofs ==== Version update (5.1.6 -> 5.1.7) - Upgrade to 5.1.7 - make bind mounts propagation slave by default. - update ldap READMEs and schema definitions. - fix program map multi-mount lookup after mount fail. - fix browse dir not re-created on symlink expire. - fix a regression with map instance lookup. - correct fsf address. - samples: fix Makefile targets' directory dependencies - remove intr hosts map mount option. - fix trailing dollar sun entry expansion. - initialize struct addrinfo for getaddrinfo() calls. - fix quoted string length calc in expandsunent(). - fix autofs mount options construction. - mount_nfs.c fix local rdma share not mounting. - configure.in: Remove unneeded second call to PKG_PROG_PKG_CONFIG. - configure.in: Do not append parentheses to PKG_PROG_PKG_CONFIG. - Use PKG_CHECK_MODULES to detect the libxml2 library. - fix ldap sasl reconnect problem. - samples/ldap.schema fix. - fix configure force shutdown check. - fix crash in sun_mount(). - fix lookup_nss_read_master() nsswicth check return. - fix typo in open_sss_lib(). - fix sss_master_map_wait timing. - add sss ECONREFUSED return handling. - use mapname in sss context for setautomntent(). - add support for new sss autofs proto version call. - fix retries check in setautomntent_wait(). - refactor sss setautomntent(). - improve sss setautomntent() error handling. - refactor sss getautomntent(). - improve sss getautomntent() error handling. - sss introduce calculate_retry_count() function. - move readall into struct master. - sss introduce a flag to indicate map being read. - update sss timeout documentation. - refactor sss getautomntbyname(). - improve sss getautomntbyname() error handling. - use a valid timeout in lookup_prune_one_cache(). - dont prune offset map entries. - simplify sss source stale check. - include linux/nfs.h directly in rpc_subs.h. - fix typo in daemon/automount.c. - fix direct mount unlink_mount_tree() path. - fix unlink mounts umount order. - fix incorrect logical compare in unlink_mount_tree(). - use bit flag for force unlink mounts. - improve force unlink option description. - remove command fifo on autofs mount fail. - add force unlink mounts and exit option. - cleanup stale logpri fifo pipes on unlink and exit. - fix incorrect systemctl command syntax in autofs(8). - update list.h. - add hashtable implementation. - change mountpoint to mp in struct ext_mount. - make external mounts independent of amd_entry. - make external mounts use simpler hashtable. - add a hash index to mnt_list. - use mnt_list for submounts. - use mnt_list for amdmounts. - make umount_autofs() static. - remove force parameter from umount_all(). - fix remount expire. - fix stale offset directories disable mount. - use struct mnt_list to track mounted mounts. - use struct mnt_list mounted list for expire. - remove unused function tree_get_mnt_list(). - only add expre alarm for active mounts. - move submount check into conditional_alarm_add(). - move lib/master.c to daemon/master.c. - use master_list_empty() for list empty check. - add helper to construct mount point path. - check defaults_read_config() return. - move AUTOFS_LIB to end of build rule lines. - make autofs.a a shared library. - make lookup_file.c nss map read status return handling consistent. - fix empty mounts list return from unlink_mount_tree(). - Refreshed autofs-5.1.1-dbus-udisks-monitor.patch - Replaced automount-fix-master-wait.patch with upstream patch autofs-5.1.7-Fix-option-for-master_read_wait.patch ==== bind ==== Subpackages: bind-doc bind-utils python3-bind - Rewrite of named service handling to better cope with systemd protection (see change from Thu Jan 21) by introducing a separate script "named.prep" which runs without restrictions prior to starting named. Removed all references to "lwresd" as "The lightweight resolver daemon and library (lwresd and liblwres) have been removed." (See CHANGES, item 4707) [bind.spec, vendor-files.tar.bz2] ==== coreutils ==== Subpackages: coreutils-doc coreutils-lang - Use new packageand format - coreutils-tests-fix-FP-in-ls-stat-free-color.patch: Add upstream patch to avoid FP in testsuite. - coreutils.spec: - Reference the above patch. - Change keyring URL to new GNU coreutils Group Release Keyring. - coreutils.keyring: Update with the Group Release Keyring. ==== graphviz ==== Subpackages: graphviz-plugins-core libgraphviz6 - Remove obsolete pre_checkin.sh ==== graphviz-addons ==== Subpackages: graphviz-gd graphviz-gnome - Remove obsolete pre_checkin.sh ==== iproute2 ==== Version update (5.11 -> 5.12) - Update to release 5.12 * devlink: Use library provided string processing APIs * utils: Introduce helper routines for generic socket recv * q_cake: Fix incorrect printing of signed values in class statistics * json_print: Add print_tv() * nexthop: Add support for nexthop buckets * nexthop: Add support for resilient nexthop groups * ip: xfrm: add support for tfcpad * tc: e_bpf: fix memory leak in parse_bpf() * lib: bpf_legacy: treat 0 as a valid file descriptor * ip: drop 2-char command assumption * bridge: vlan: dump port only if there are any vlans ==== kernel-source ==== Subpackages: kernel-default kernel-docs - rpm/constraints.in: remove aarch64 disk size exception obs://Kernel:stable/kernel-default/ARM/aarch64 currrently fails: installing package kernel-default-livepatch-devel-5.12.0-3.1.g6208a83.aarch64 needs 3MB more space on the / filesystem The stats say: Maximal used disk space: 31799 Mbyte By default, we require 35G. For aarch64 we had an exception to lower this limit to 30G there. Drop this exception as it is obviously no longer valid. - commit ee00b50 - series.conf: cleanup - fix Patch-mainline tag and move to "almost mainline" section: patches.suse/crypto-ccp-Annotate-SEV-Firmware-file-names.patch - commit 3a48ed8 - crypto: ccp: Annotate SEV Firmware file names (bsc#1185282). - commit 66154b6 ==== libical ==== Version update (3.0.9 -> 3.0.10) - update to 3.0.10: * Fix generating wrong recurrence rules * Fix a bug computing transitions in tzfiles * Fix reading TZif files to use TZ string in the footer as the last (non-terminating) transitions * Fix reading TZif files to use more RRULEs and/or RDATEs whevever possible * Built-in timezones updated to tzdata2021a ==== libical-glib ==== Version update (3.0.9 -> 3.0.10) - update to 3.0.10: * Fix generating wrong recurrence rules * Fix a bug computing transitions in tzfiles * Fix reading TZif files to use TZ string in the footer as the last (non-terminating) transitions * Fix reading TZif files to use more RRULEs and/or RDATEs whevever possible * Built-in timezones updated to tzdata2021a ==== libinput ==== Version update (1.17.1 -> 1.17.2) Subpackages: libinput-udev libinput10 - Update to release 1.17.2 * Fix sensitivity for Dell Latitude 7490 pointing-stick * Add palm size quirk for the Gigabyte Aero 15 ==== libzypp ==== Version update (17.25.9 -> 17.25.10) - Properly handle permission denied when providing optional files (bsc#1185239) - Fix sevice detection with cgroupv2 (bsc#1184997) - version 17.25.10 (22) ==== nano ==== Version update (5.6.1 -> 5.7) Subpackages: nano-lang - GNU nano 5.7: * The output of --constantshow (without --minibar) is more stable * When opening multiple buffers and there is an error message, this message is shown again upon first switch to the relevant buffer * The position and size of the indicator now follow actual lines, instead of visual lines when in softwrap mode, meaning that the size of the indicator can change when scrolling in softwrap mode ==== open-iscsi ==== Subpackages: iscsiuio libopeniscsiusr0_2_0 - Local (SUSE) change: update iscsi.service so that it tries to logon to any "onboot" and firmware targets, in case a target was offline when booted but back up when the service is started. (bsc#1153806) - Merged with latest from upstream, which contains these fixes: * Add "no wait" option to iscsiadm firmware login * Check for ISCSI_ERR_ISCSID_NOTCONN in iscsistart * Log proper error message when AUTH failure occurs ==== php7 ==== Version update (7.4.16 -> 7.4.18) Subpackages: php7-cli php7-ctype php7-dom php7-gd php7-gettext php7-iconv php7-json php7-mbstring php7-mysql php7-openssl php7-pdo php7-sqlite php7-tokenizer php7-xmlreader php7-xmlwriter - updated to 7.4.18: This is a security bug fix release. See https://www.php.net/ChangeLog-7.php#7.4.18 ==== python38 ==== Version update (3.8.8 -> 3.8.9) Subpackages: python38-curses python38-dbm python38-tk - Update to 3.8.9: - bpo#42988 (bsc#1183374) CVE-2021-3426: Remove the getfile feature of the pydoc module which could be abused to read arbitrary files on the disk (directory traversal vulnerability). Moreover, even source code of Python modules can contain sensitive data like passwords. Vulnerability reported by David Schwörer. - bpo-43285: ftplib no longer trusts the IP address value returned from the server in response to the PASV command by default. This prevents a malicious FTP server from using the response to probe IPv4 address and port combinations on the client network. - Code that requires the former vulnerable behavior may set a trust_server_pasv_ipv4_address attribute on their ftplib.FTP instances to True to re-enable it. - bpo-43439: Add audit hooks for gc.get_objects(), gc.get_referrers() and gc.get_referents(). Patch by Pablo Galindo. - bpo-43660: Fix crash that happens when replacing sys.stderr with a callable that can remove the object while an exception is being printed. Patch by Pablo Galindo. - bpo-35883: Python no longer fails at startup with a fatal error if a command line argument contains an invalid Unicode character. The Py_DecodeLocale() function now escapes byte sequences which would be decoded as Unicode characters outside the [U+0000; U+10ffff] range. - bpo-43406: Fix a possible race condition where PyErr_CheckSignals tries to execute a non-Python signal handler. - bpo-35930: Raising an exception raised in a ?future? instance will create reference cycles. - bpo-43577: Fix deadlock when using ssl.SSLContext debug callback with ssl.SSLContext.sni_callback(). - bpo-43423: subprocess.communicate() no longer raises an IndexError when there is an empty stdout or stderr IO buffer during a timeout on Windows. - bpo-27820: Fixed long-standing bug of smtplib.SMTP where doing AUTH LOGIN with initial_response_ok=False will fail. The cause is that SMTP.auth_login _always_ returns a password if provided with a challenge string, thus non-compliant with the standard for AUTH LOGIN. Also fixes bug with the test for smtpd. - bpo-43399: Fix ElementTree.extend not working on iterators when using the Python implementation - bpo-43316: The python -m gzip command line application now properly fails when detecting an unsupported extension. It exits with a non-zero exit code and prints an error message to stderr. - bpo-43260: Fix TextIOWrapper can not flush internal buffer forever after very large text is written. - bpo-42782: Fail fast in shutil.move() to avoid creating destination directories on failure. - bpo-37193: Fixed memory leak in socketserver.ThreadingMixIn introduced in Python 3.7. - bpo-43199: Answer ?Why is there no goto?? in the Design and History FAQ. - bpo-43407: Clarified that a result from time.monotonic(), time.perf_counter(), time.process_time(), or time.thread_time() can be compared with the result from any following call to the same function - not just the next immediate call. - bpo-27646: Clarify that ?yield from <expr>? works with any iterable, not just iterators. - bpo-36346: Update some deprecated unicode APIs which are documented as ?will be removed in 4.0? to ?3.12?. See PEP 623 for detail. - bpo-37945: Fix test_getsetlocale_issue1813() of test_locale: skip the test if setlocale() fails. Patch by Victor Stinner. - bpo-41561: Add workaround for Ubuntu?s custom OpenSSL security level policy. - bpo-43631: Update macOS, Windows, and CI to OpenSSL 1.1.1k. - bpo-43617: Improve configure.ac: Check for presence of autoconf-archive package and remove our copies of M4 macros. - bpo-41837: Update macOS installer build to use OpenSSL 1.1.1j. - bpo-42225: Document that IDLE can fail on Unix either from misconfigured IP masquerage rules or failure displaying complex colored (non-ascii) characters. - bpo-43283: Document why printing to IDLE?s Shell is often slower than printing to a system terminal and that it can be made faster by pre-formatting a single string before printing. ==== python38-core ==== Version update (3.8.8 -> 3.8.9) Subpackages: libpython3_8-1_0 python38-base - Update to 3.8.9: - bpo#42988 (bsc#1183374) CVE-2021-3426: Remove the getfile feature of the pydoc module which could be abused to read arbitrary files on the disk (directory traversal vulnerability). Moreover, even source code of Python modules can contain sensitive data like passwords. Vulnerability reported by David Schwörer. - bpo-43285: ftplib no longer trusts the IP address value returned from the server in response to the PASV command by default. This prevents a malicious FTP server from using the response to probe IPv4 address and port combinations on the client network. - Code that requires the former vulnerable behavior may set a trust_server_pasv_ipv4_address attribute on their ftplib.FTP instances to True to re-enable it. - bpo-43439: Add audit hooks for gc.get_objects(), gc.get_referrers() and gc.get_referents(). Patch by Pablo Galindo. - bpo-43660: Fix crash that happens when replacing sys.stderr with a callable that can remove the object while an exception is being printed. Patch by Pablo Galindo. - bpo-35883: Python no longer fails at startup with a fatal error if a command line argument contains an invalid Unicode character. The Py_DecodeLocale() function now escapes byte sequences which would be decoded as Unicode characters outside the [U+0000; U+10ffff] range. - bpo-43406: Fix a possible race condition where PyErr_CheckSignals tries to execute a non-Python signal handler. - bpo-35930: Raising an exception raised in a ?future? instance will create reference cycles. - bpo-43577: Fix deadlock when using ssl.SSLContext debug callback with ssl.SSLContext.sni_callback(). - bpo-43423: subprocess.communicate() no longer raises an IndexError when there is an empty stdout or stderr IO buffer during a timeout on Windows. - bpo-27820: Fixed long-standing bug of smtplib.SMTP where doing AUTH LOGIN with initial_response_ok=False will fail. The cause is that SMTP.auth_login _always_ returns a password if provided with a challenge string, thus non-compliant with the standard for AUTH LOGIN. Also fixes bug with the test for smtpd. - bpo-43399: Fix ElementTree.extend not working on iterators when using the Python implementation - bpo-43316: The python -m gzip command line application now properly fails when detecting an unsupported extension. It exits with a non-zero exit code and prints an error message to stderr. - bpo-43260: Fix TextIOWrapper can not flush internal buffer forever after very large text is written. - bpo-42782: Fail fast in shutil.move() to avoid creating destination directories on failure. - bpo-37193: Fixed memory leak in socketserver.ThreadingMixIn introduced in Python 3.7. - bpo-43199: Answer ?Why is there no goto?? in the Design and History FAQ. - bpo-43407: Clarified that a result from time.monotonic(), time.perf_counter(), time.process_time(), or time.thread_time() can be compared with the result from any following call to the same function - not just the next immediate call. - bpo-27646: Clarify that ?yield from <expr>? works with any iterable, not just iterators. - bpo-36346: Update some deprecated unicode APIs which are documented as ?will be removed in 4.0? to ?3.12?. See PEP 623 for detail. - bpo-37945: Fix test_getsetlocale_issue1813() of test_locale: skip the test if setlocale() fails. Patch by Victor Stinner. - bpo-41561: Add workaround for Ubuntu?s custom OpenSSL security level policy. - bpo-43631: Update macOS, Windows, and CI to OpenSSL 1.1.1k. - bpo-43617: Improve configure.ac: Check for presence of autoconf-archive package and remove our copies of M4 macros. - bpo-41837: Update macOS installer build to use OpenSSL 1.1.1j. - bpo-42225: Document that IDLE can fail on Unix either from misconfigured IP masquerage rules or failure displaying complex colored (non-ascii) characters. - bpo-43283: Document why printing to IDLE?s Shell is often slower than printing to a system terminal and that it can be made faster by pre-formatting a single string before printing. ==== python38-documentation ==== Version update (3.8.8 -> 3.8.9) - Update to 3.8.9: - bpo#42988 (bsc#1183374) CVE-2021-3426: Remove the getfile feature of the pydoc module which could be abused to read arbitrary files on the disk (directory traversal vulnerability). Moreover, even source code of Python modules can contain sensitive data like passwords. Vulnerability reported by David Schwörer. - bpo-43285: ftplib no longer trusts the IP address value returned from the server in response to the PASV command by default. This prevents a malicious FTP server from using the response to probe IPv4 address and port combinations on the client network. - Code that requires the former vulnerable behavior may set a trust_server_pasv_ipv4_address attribute on their ftplib.FTP instances to True to re-enable it. - bpo-43439: Add audit hooks for gc.get_objects(), gc.get_referrers() and gc.get_referents(). Patch by Pablo Galindo. - bpo-43660: Fix crash that happens when replacing sys.stderr with a callable that can remove the object while an exception is being printed. Patch by Pablo Galindo. - bpo-35883: Python no longer fails at startup with a fatal error if a command line argument contains an invalid Unicode character. The Py_DecodeLocale() function now escapes byte sequences which would be decoded as Unicode characters outside the [U+0000; U+10ffff] range. - bpo-43406: Fix a possible race condition where PyErr_CheckSignals tries to execute a non-Python signal handler. - bpo-35930: Raising an exception raised in a ?future? instance will create reference cycles. - bpo-43577: Fix deadlock when using ssl.SSLContext debug callback with ssl.SSLContext.sni_callback(). - bpo-43423: subprocess.communicate() no longer raises an IndexError when there is an empty stdout or stderr IO buffer during a timeout on Windows. - bpo-27820: Fixed long-standing bug of smtplib.SMTP where doing AUTH LOGIN with initial_response_ok=False will fail. The cause is that SMTP.auth_login _always_ returns a password if provided with a challenge string, thus non-compliant with the standard for AUTH LOGIN. Also fixes bug with the test for smtpd. - bpo-43399: Fix ElementTree.extend not working on iterators when using the Python implementation - bpo-43316: The python -m gzip command line application now properly fails when detecting an unsupported extension. It exits with a non-zero exit code and prints an error message to stderr. - bpo-43260: Fix TextIOWrapper can not flush internal buffer forever after very large text is written. - bpo-42782: Fail fast in shutil.move() to avoid creating destination directories on failure. - bpo-37193: Fixed memory leak in socketserver.ThreadingMixIn introduced in Python 3.7. - bpo-43199: Answer ?Why is there no goto?? in the Design and History FAQ. - bpo-43407: Clarified that a result from time.monotonic(), time.perf_counter(), time.process_time(), or time.thread_time() can be compared with the result from any following call to the same function - not just the next immediate call. - bpo-27646: Clarify that ?yield from <expr>? works with any iterable, not just iterators. - bpo-36346: Update some deprecated unicode APIs which are documented as ?will be removed in 4.0? to ?3.12?. See PEP 623 for detail. - bpo-37945: Fix test_getsetlocale_issue1813() of test_locale: skip the test if setlocale() fails. Patch by Victor Stinner. - bpo-41561: Add workaround for Ubuntu?s custom OpenSSL security level policy. - bpo-43631: Update macOS, Windows, and CI to OpenSSL 1.1.1k. - bpo-43617: Improve configure.ac: Check for presence of autoconf-archive package and remove our copies of M4 macros. - bpo-41837: Update macOS installer build to use OpenSSL 1.1.1j. - bpo-42225: Document that IDLE can fail on Unix either from misconfigured IP masquerage rules or failure displaying complex colored (non-ascii) characters. - bpo-43283: Document why printing to IDLE?s Shell is often slower than printing to a system terminal and that it can be made faster by pre-formatting a single string before printing. ==== samba ==== Version update (4.14.2+git.159.2a8872214bf -> 4.14.4+git.162.18fd73a39a0) Subpackages: libdcerpc-binding0 libdcerpc-binding0-32bit libdcerpc0 libdcerpc0-32bit libndr-krb5pac0 libndr-krb5pac0-32bit libndr-nbt0 libndr-nbt0-32bit libndr-standard0 libndr-standard0-32bit libndr1 libndr1-32bit libnetapi0 libnetapi0-32bit libsamba-credentials1 libsamba-credentials1-32bit libsamba-errors0 libsamba-errors0-32bit libsamba-hostconfig0 libsamba-hostconfig0-32bit libsamba-passdb0 libsamba-passdb0-32bit libsamba-policy0-python3 libsamba-util0 libsamba-util0-32bit libsamdb0 libsamdb0-32bit libsmbclient0 libsmbconf0 libsmbconf0-32bit libsmbldap2 libsmbldap2-32bit libtevent-util0 libtevent-util0-32bit libwbclient0 libwbclient0-32bit samba-client samba-client-32bit samba-doc samba-libs samba-libs-32bit samba-libs-python3 samba-python3 samba-winbind samba-winbind-32bit - Update to 4.14.4 * CVE-2021-20254: Fix buffer overrun in sids_to_unixids(); (bso#14571); (bsc#1184677). - Update to 4.14.3 * s3:modules:vfs_virusfilter: Recent New_VFS changes break vfs_virusfilter_openat; (bso#14671). * build: Notice if flex is missing at configure time; (bso#14586). * Fix smbd panic when two clients open same file; (bso#14672). * Fix memory leak in the RPC server; (bso#14675). * s3: smbd: fix deferred renames; (bso#14679). * s3-iremotewinspool: Set the per-request memory context; (bso#14675) * Fix memory leak in the RPC server; (bso#14675). * third_party: Update socket_wrapper to version 1.3.2; (bso#11899). * third_party: Update socket_wrapper to version 1.3.3; (bso#14640). * samba-gpupdate: Test that sysvol paths download in case-insensitive way; (bso#14665). * smbd: Ensure errno is preserved across fsp destructor; (bso#14662). * idmap_rfc2307 and idmap_nss return wrong mapping for uid/gid conflict; (bso#14663). * build: Only add -Wl,--as-needed when supported; (bso#14288). ==== snapper ==== Subpackages: libsnapper5 snapper-zypp-plugin - added systemd sandboxing for services ==== virt-bootstrap ==== - Only build python3 on Tumbleweed: python3-libguestfs is only python3 flavor, too. - Enable unit tests ==== xorgproto ==== Version update (2021.3 -> 2021.4) - xorgproto 2021.4 The big new feature in this release is Olivier's addition that makes up XFixes 6: the new ClientDisconnectMode. An X server that is started on demand (Xwayland) should ideally also terminate when the last client disconnects. However, some X11 clients that provide system services will linger around forever, preventing that shutdown. With the new XFixes request, a client can designate itself as to-be-terminated and the X server can ignore those clients when counting the number of remaining clients. If no other clients are left, the server can shut down. Note that this requires changes to the X server and each client to work. ==== yast2-add-on ==== Version update (4.3.8 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-apparmor ==== Version update (4.3.1 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-auth-client ==== Version update (4.3.2 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-auth-server ==== Version update (4.2.5 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-configuration-management ==== Version update (4.3.5 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-control-center ==== Version update (4.3.0 -> 4.4.0) Subpackages: yast2-control-center-qt - 4.4.0 (bsc#1185510) ==== yast2-core ==== Version update (4.3.3 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-dns-server ==== Version update (4.3.3 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-firewall ==== Version update (4.3.11 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-firstboot ==== Version update (4.3.11 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-ftp-server ==== Version update (4.3.2 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-hardware-detection ==== Version update (4.1.2 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-journal ==== Version update (4.3.0 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-kdump ==== Version update (4.3.4 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-mail ==== Version update (4.3.3 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-nfs-client ==== Version update (4.3.3 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-nfs-server ==== Version update (4.3.2 -> 4.4.0) Subpackages: yast2-nfs-common - 4.4.0 (bsc#1185510) ==== yast2-nis-server ==== Version update (4.3.1 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-ntp-client ==== Version update (4.3.2 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-online-update ==== Version update (4.2.2 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-pam ==== Version update (4.3.4 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-perl-bindings ==== Version update (4.3.0 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-proxy ==== Version update (4.3.2 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-python-bindings ==== Version update (4.1.4 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-samba-server ==== Version update (4.3.4 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-security ==== Version update (4.3.16 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-services-manager ==== Version update (4.3.6 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-slp ==== Version update (4.1.1 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-sound ==== Version update (4.3.3 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-storage-ng ==== Version update (4.3.50 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-sysconfig ==== Version update (4.3.3 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-tftp-server ==== Version update (4.3.1 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-theme ==== Version update (4.3.8 -> 4.4.0) Subpackages: yast2-theme-breeze - 4.4.0 (bsc#1185510) ==== yast2-update ==== Version update (4.3.2 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-xml ==== Version update (4.1.1 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-ycp-ui-bindings ==== Version update (4.3.9 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== zypper ==== Version update (1.14.43 -> 1.14.44) Subpackages: zypper-log zypper-needs-restarting - Rephrase needs-rebooting help and messages. Try to point out that the need to reboot was not necessarily triggered by the current transaction. - man page: Recommend the needs-rebooting command to test whether a system reboot is suggested. - patch: Let a patch's reboot-needed flag overrule included packages (bsc#1183268) - Quickfix setting "openSUSE_Tumbleweed" as default platform for "MicroOS" (bsc#1153687) This fixes the guessed platform for "obs://<project>/" URLs. - Protect against strict/relaxed user umask via sudo (bsc#1183589) - zypper-log: protect against thread name indicators in a log. - xml summary: add solvables repository alias (bsc#1182372) - version 1.14.44

1 0

Problem with .desktop file with Terminal=true on Tumbleweed
by Freek de Kruijf 03 May '21

03 May '21

After a recent update of Tumbleweed I have problems with a few .desktop files on my Desktop. This remains also with the newest update. These files contain the line "Terminal=true" and should start a shell script or a command in line mode. I get the message "Warning: Could not find interactive shell to start." or something with that type of content. I see a translated message. The strange thing is that I have another .desktop file with exactly the same content only considering the keywords which does work. Also the protection flags of the files and the owner are the same. Anybody else seeing this problem? -- fr.gr. member openSUSE Freek de Kruijf

2 2

New Tumbleweed snapshot 20210430 released!
by Dominique Leuenberger 02 May '21

02 May '21

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: boost-base boost-extra branding-openSUSE evolution evolution-data-server evolution-ews freecell-solver (6.0.1 -> 6.2.0) glyr less (581 -> 581.2) libgnome-games-support (1.7.1 -> 1.8.1) libgsm (1.0.18 -> 1.0.19) libxml2 libyui (4.2.5 -> 4.2.8) libyui-ncurses (4.2.5 -> 4.2.8) libyui-ncurses-pkg (4.2.5 -> 4.2.8) libyui-qt (4.2.5 -> 4.2.8) libyui-qt-graph (4.2.5 -> 4.2.8) libyui-qt-pkg (4.2.5 -> 4.2.8) mariadb mariadb-connector-c openSUSE-xfce-icon-theme (4.16.1+git4.47431fc -> 4.16.1+git5.e82fd05) plymouth polkit-default-privs (1550+20210409.c29362e -> 1550+20210430.c408cda) python-libxml2 python-pyxdg qemu sensors virglrenderer (0.9.0 -> 0.9.1) yast2-instserver (4.3.0 -> 4.4.0) yast2-sudo (4.3.0 -> 4.4.0) yast2-vpn (4.3.0 -> 4.4.0) === Details === ==== boost-base ==== Subpackages: boost-license1_76_0 libboost_date_time1_76_0 libboost_filesystem1_76_0 libboost_iostreams1_76_0 libboost_locale1_76_0 libboost_program_options1_76_0 libboost_thread1_76_0 - Remove libboost_math_c99l.so* libboost_math_tr1l.so* in spec file for PowerPC compiled w/ BOOST_MATH_NO_LONG_DOUBLE_MATH_FUNCTIONS ==== boost-extra ==== - Remove libboost_math_c99l.so* libboost_math_tr1l.so* in spec file for PowerPC compiled w/ BOOST_MATH_NO_LONG_DOUBLE_MATH_FUNCTIONS ==== branding-openSUSE ==== Subpackages: grub2-branding-openSUSE libreoffice-branding-openSUSE plymouth-branding-openSUSE systemd-icon-branding-openSUSE wallpaper-branding-openSUSE yast2-qt-branding-openSUSE - Also skip *.tr as config files in /etc/bootsplash/themes/openSUSE/bootloader (in addition to /etc/bootsplash/themes/openSUSE/cdrom) ==== evolution ==== Subpackages: evolution-lang evolution-plugin-bogofilter evolution-plugin-pst-import evolution-plugin-spamassassin evolution-plugin-text-highlight - Add 7cfe4190e.patch: Fix build with cmake 3.20.1. ==== evolution-data-server ==== Subpackages: evolution-data-server-lang libcamel-1_2-62 libebackend-1_2-10 libebook-1_2-20 libebook-contacts-1_2-3 libecal-2_0-1 libedata-book-1_2-26 libedata-cal-2_0-1 libedataserver-1_2-26 libedataserverui-1_2-3 - Add c95a70bfeae25b.patch: Fix build with cmake 3.20.1. ==== evolution-ews ==== Subpackages: evolution-ews-lang - Add 6d8f7d303e.patch: Fix build with cmake 3.20.1. ==== freecell-solver ==== Version update (6.0.1 -> 6.2.0) Subpackages: freecell-solver-presets libfreecell-solver0 - Update to 6.2.0 * Fix run time errors * Add a more compact representation of zero-freecells deals - New build requirement: python3-cffi ==== glyr ==== - Use %cmake_build and %license macros. - Set License to LGPL-3.0-or-later. ==== less ==== Version update (581 -> 581.2) - update to 581.2: * This fixes a bug found in less-581 where the terminal was sometimes left in mouse-reporting mode after exiting less. ==== libgnome-games-support ==== Version update (1.7.1 -> 1.8.1) Subpackages: libgnome-games-support-1-3 libgnome-games-support-lang - Update to version 1.8.1: + Updated translations. ==== libgsm ==== Version update (1.0.18 -> 1.0.19) - update to 1.0.19: * Make it easier to include gsm.h from C++ by wrapping it with macros. Throw a #define _POSIX_C_SOURCE 200809L into toast.h to make it possible for Linux glibc to just work. * Switch from compress/.Z to gzip/.gz ==== libxml2 ==== Subpackages: libxml2-2 libxml2-2-32bit libxml2-tools - Security fix: [bsc#1185408, CVE-2021-3518] * Fix use-after-free in xinclude.c:xmlXIncludeDoProcess() * Add libxml2-CVE-2021-3518.patch - Security fix: [bsc#1185410, CVE-2021-3517] * Fix heap-based buffer overflow in entities.c:xmlEncodeEntitiesInternal() * Add libxml2-CVE-2021-3517.patch - Security fix: [bsc#1185409, CVE-2021-3516] * Fix use-after-free in entities.c:xmlEncodeEntitiesInternal() * Add libxml2-CVE-2021-3516.patch ==== libyui ==== Version update (4.2.5 -> 4.2.8) - Fixed license headers to use the correct license (LGPL) everywhere (bsc#1185443) - 4.2.8 - Auto-publish C++ API docs (libyui base lib doxygen autodocs) as GitHub pages when a PR to master is merged (part of bsc#1181653) Doc URL: https://libyui.github.io/libyui/api-doc/index.html - 4.2.7 - Moved CI scripts into new subdir scripts/ to unclutter toplevel dir (part of bsc#1181653) - Renamed ambiguously named script local.sh to local-prefix.sh - 4.2.6 ==== libyui-ncurses ==== Version update (4.2.5 -> 4.2.8) - Fixed license headers to use the correct license (LGPL) everywhere (bsc#1185443) - 4.2.8 - Auto-publish C++ API docs (libyui base lib doxygen autodocs) as GitHub pages when a PR to master is merged (part of bsc#1181653) Doc URL: https://libyui.github.io/libyui/api-doc/index.html - 4.2.7 - Moved CI scripts into new subdir scripts/ to unclutter toplevel dir (part of bsc#1181653) - Renamed ambiguously named script local.sh to local-prefix.sh - 4.2.6 ==== libyui-ncurses-pkg ==== Version update (4.2.5 -> 4.2.8) - Fixed license headers to use the correct license (LGPL) everywhere (bsc#1185443) - 4.2.8 - Auto-publish C++ API docs (libyui base lib doxygen autodocs) as GitHub pages when a PR to master is merged (part of bsc#1181653) Doc URL: https://libyui.github.io/libyui/api-doc/index.html - 4.2.7 - Moved CI scripts into new subdir scripts/ to unclutter toplevel dir (part of bsc#1181653) - Renamed ambiguously named script local.sh to local-prefix.sh - 4.2.6 ==== libyui-qt ==== Version update (4.2.5 -> 4.2.8) - Fixed license headers to use the correct license (LGPL) everywhere (bsc#1185443) - 4.2.8 - Auto-publish C++ API docs (libyui base lib doxygen autodocs) as GitHub pages when a PR to master is merged (part of bsc#1181653) Doc URL: https://libyui.github.io/libyui/api-doc/index.html - 4.2.7 - Moved CI scripts into new subdir scripts/ to unclutter toplevel dir (part of bsc#1181653) - Renamed ambiguously named script local.sh to local-prefix.sh - 4.2.6 ==== libyui-qt-graph ==== Version update (4.2.5 -> 4.2.8) - Fixed license headers to use the correct license (LGPL) everywhere (bsc#1185443) - 4.2.8 - Auto-publish C++ API docs (libyui base lib doxygen autodocs) as GitHub pages when a PR to master is merged (part of bsc#1181653) Doc URL: https://libyui.github.io/libyui/api-doc/index.html - 4.2.7 - Moved CI scripts into new subdir scripts/ to unclutter toplevel dir (part of bsc#1181653) - Renamed ambiguously named script local.sh to local-prefix.sh - 4.2.6 ==== libyui-qt-pkg ==== Version update (4.2.5 -> 4.2.8) - Fixed license headers to use the correct license (LGPL) everywhere (bsc#1185443) - 4.2.8 - Auto-publish C++ API docs (libyui base lib doxygen autodocs) as GitHub pages when a PR to master is merged (part of bsc#1181653) Doc URL: https://libyui.github.io/libyui/api-doc/index.html - 4.2.7 - Moved CI scripts into new subdir scripts/ to unclutter toplevel dir (part of bsc#1181653) - Renamed ambiguously named script local.sh to local-prefix.sh - 4.2.6 ==== mariadb ==== Subpackages: libmariadbd19 mariadb-client mariadb-errormessages - Add mariadb-10.5.9-cmake-3.20.patch: Fix syntax error which is exposed by cmake 3.20. ==== mariadb-connector-c ==== - Add mariadb-connector-c-cmake-3.20.patch: Fix build with cmake 3.20. ==== openSUSE-xfce-icon-theme ==== Version update (4.16.1+git4.47431fc -> 4.16.1+git5.e82fd05) - Update to version 4.16.1+git5.e82fd05: * Remove unused entries (boo#1183828) ==== plymouth ==== Subpackages: libply-boot-client5 libply-splash-core5 libply-splash-graphics5 libply5 plymouth-dracut plymouth-plugin-label plymouth-plugin-two-step plymouth-scripts plymouth-theme-bgrt plymouth-theme-spinner - Pickup plymouth-only_use_fb_for_cirrus_bochs.patch: Currently our kernel hardware support need this fix, and boo#1172028 will be fix seperately (bnc#888590 boo#1172028 bsc#1181913). - Disable plymouth-systemd-KillMode-mixed.patch: Temporary disable it, because aarch64 and ppc64le system could not booting in release period, and this is only a enhancement with no harm to rollback (bnc#1177082, bnc#1182145, bnc#1184087). ==== polkit-default-privs ==== Version update (1550+20210409.c29362e -> 1550+20210430.c408cda) - Update to version 1550+20210430.c408cda: * systemd: add newly added inhibit-handle-reboot-key action (bsc#1185468) * whitelist non-functional change in systemd-networkd rules (bsc#1185469) - Update to version 1550+20210429.a605b7d: * tuned: whitelist incrementally added polkit action (bsc#1185418) ==== python-libxml2 ==== - Security fix: [bsc#1185408, CVE-2021-3518] * Fix use-after-free in xinclude.c:xmlXIncludeDoProcess() * Add libxml2-CVE-2021-3518.patch - Security fix: [bsc#1185410, CVE-2021-3517] * Fix heap-based buffer overflow in entities.c:xmlEncodeEntitiesInternal() * Add libxml2-CVE-2021-3517.patch - Security fix: [bsc#1185409, CVE-2021-3516] * Fix use-after-free in entities.c:xmlEncodeEntitiesInternal() * Add libxml2-CVE-2021-3516.patch ==== python-pyxdg ==== - Obsolete python-xdg to resolve conflicting state (boo#1178803) * see https://bbs.archlinux.org/viewtopic.php?id=262403 for a workaround ==== qemu ==== Subpackages: qemu-arm qemu-audio-spice qemu-block-curl qemu-block-dmg qemu-block-gluster qemu-block-iscsi qemu-block-nfs qemu-block-rbd qemu-block-ssh qemu-chardev-baum qemu-chardev-spice qemu-guest-agent qemu-hw-display-qxl qemu-hw-display-virtio-gpu qemu-hw-display-virtio-gpu-pci qemu-hw-display-virtio-vga qemu-hw-usb-redirect qemu-hw-usb-smartcard qemu-ipxe qemu-ksm qemu-kvm qemu-lang qemu-microvm qemu-ppc qemu-s390x qemu-seabios qemu-sgabios qemu-skiboot qemu-tools qemu-ui-curses qemu-ui-gtk qemu-ui-opengl qemu-ui-spice-app qemu-ui-spice-core qemu-vgabios qemu-vhost-user-gpu qemu-x86 - Include upstream patch designated as stable material and reviewed for applicability to include here mptsas-Remove-unused-MPTSASState-pending.patch - Clarify in support documents that cpu-add was removed in this release from both the human monitor protocol (HMP) and QMP interfaces - 6.0.0 qemu is about to be released. Add comments to the in- package support documents (supported.<arch>.txt) about the new deprecations as of that release as an early head's up for qemu users. These deprecations include these command-line options: - M option: kernel-irqchip=off - chardev tty - chardev paraport - enable-fips - writeconfig - spice password=string ==== sensors ==== Subpackages: libsensors4 - change-pidfile-path-from-var-run-to-run.patch: Change PIDFile path from /var/run to /run (bsc#1185183). - var-run-deprecated.patch: /var/run is deprecated (bsc#1185183). ==== virglrenderer ==== Version update (0.9.0 -> 0.9.1) - Update to version 0.9.1: * Various small bugfixes ==== yast2-instserver ==== Version update (4.3.0 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-sudo ==== Version update (4.3.0 -> 4.4.0) - 4.4.0 (bsc#1185510) ==== yast2-vpn ==== Version update (4.3.0 -> 4.4.0) - 4.4.0 (bsc#1185510)

1 0

New Tumbleweed snapshot 20210429 released!
by Dominique Leuenberger 01 May '21

01 May '21

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… Please do not reply to this email to report issues, rather file a bug on bugzilla.opensuse.org. For more information on filing bugs please see https://en.opensuse.org/openSUSE:Submitting_bug_reports Packages changed: apparmor cups edict (20201102 -> 20210429) gnome-control-center gnome-online-accounts (3.39.92 -> 3.40.0) gnome-shell-extensions gnome-system-monitor gtk3 (3.24.28 -> 3.24.29) hdparm (9.60 -> 9.61) ipmitool libapparmor libjpeg-turbo (2.0.6 -> 2.1.0) libselinux libstorage-ng (4.3.106 -> 4.4.1) memtest86+ ncurses (6.2.20210327 -> 6.2.20210424) patterns-media python-matplotlib rubygem-listen (3.4.1 -> 3.5.1) selinux-policy sg3_utils (1.45~815+5.6aa67ed -> 1.46) tcsh (6.22.03 -> 6.22.04) texlive (6.3.2 -> 6.3.3) texlive-specs-m (2020.182.20200202_pl5svn53958 -> 2021.185.20201001_pl4svn57354) texlive-specs-n (2020.182.2.004svn48145 -> 2021.185.2.005svn58637) unison (2.51.2 -> 2.51.4_rc2) webkit2gtk3 wireless-regdb (20210407 -> 20210421) yast2 (4.4.1 -> 4.4.2) yast2-installation (4.4.4 -> 4.4.5) yast2-network (4.4.5 -> 4.4.8) zchunk (1.1.5 -> 1.1.9) === Details === ==== apparmor ==== Subpackages: apparmor-abstractions apparmor-docs apparmor-parser apparmor-parser-lang apparmor-profiles apparmor-utils apparmor-utils-lang pam_apparmor pam_apparmor-32bit python3-apparmor - add crypto-policies-mr720.diff to allow reading crypto policies in abstractions/ssl_certs (boo#1183597) - replace %{?systemd_requires} with %{?systemd_ordering} to avoid dragging in systemd into containers just because apparmor-parser ships a *.service file ==== cups ==== Subpackages: cups-client cups-config libcups2 libcups2-32bit libcupsimage2 - upstream_pull_174.patch is https://github.com/OpenPrinting/cups/pull/174 "Use 60s timeout for read_thread, revert read limits" to fix printing with older USB printers - New upstream URL https://openprinting.github.io/cups ==== edict ==== Version update (20201102 -> 20210429) Subpackages: edict2 jmdict - Update to snapshot 20210429 * No changelog recorded. ==== gnome-control-center ==== Subpackages: gnome-control-center-color gnome-control-center-goa gnome-control-center-lang gnome-control-center-user-faces - Rebased gnome-control-center-info-never-use-gnome-software.patch, gnome-control-center-more-power-button-actions.patch and gnome-control-center-bring-back-firewall-zone.patch(bsc#1184098). ==== gnome-online-accounts ==== Version update (3.39.92 -> 3.40.0) Subpackages: gnome-online-accounts-lang libgoa-1_0-0 libgoa-backend-1_0-1 typelib-1_0-Goa-1_0 - Update to version 3.40.0: + No changes. ==== gnome-shell-extensions ==== - Have gnome-shell-classic obsolete gnome-shell-classic-session, since gnome-shell-classic-session is no longer used. ==== gnome-system-monitor ==== Subpackages: gnome-system-monitor-lang - Add ba93af5b3e429db5a9c4dd7e2d06b800735a9071.patch: Dropped non-gnome workaround causing crash (boo#1185340). ==== gtk3 ==== Version update (3.24.28 -> 3.24.29) Subpackages: gtk3-data gtk3-immodule-amharic gtk3-immodule-inuktitut gtk3-immodule-thai gtk3-immodule-tigrigna gtk3-immodule-vietnamese gtk3-immodule-xim gtk3-lang gtk3-schema gtk3-tools libgtk-3-0 typelib-1_0-Gtk-3_0 - Update to version 3.24.29: + Input: - Look for a Compose file in the right place. - Revert some Compose sequence changes (mainly around dead acute and apostrophe). - Consume all key events during preedit, to avoid unexpected interactions. - Ignore more modifiers during preedit, to allow using 3rd and 5th level choosers. - Fix handling of cursor positions in non-ASCII preedit text. + GtkSpinButton: Interpret localized digits. + GtkScale: Fix sporadic criticals. + GtkScrolledWindow: - Cancel overshoot on size changes. - Avoid criticals with non-overlay scrollbars. + GtkFileChooser: Handle smb mounts better. + GtkListBox: Fix extending multi-selections. + Fix a possible crash in gtk_show_uri. + Wayland: Improve font settings fallback. + X11: - Avoid log spam on exit. - Don't beep on untrusted displays. + Updated translations. - Drop gtk3-prevent-g_file_get_basename-return-NULL.patch: fixed upstream. ==== hdparm ==== Version update (9.60 -> 9.61) - update to 9.61: - fixes for --set-sector-size and reporting of physical/logical sector sizes ==== ipmitool ==== - Use /run instead of /var/run (bsc#1185162) ==== libapparmor ==== Subpackages: libapparmor1 libapparmor1-32bit - add crypto-policies-mr720.diff to allow reading crypto policies in abstractions/ssl_certs (boo#1183597) - replace %{?systemd_requires} with %{?systemd_ordering} to avoid dragging in systemd into containers just because apparmor-parser ships a *.service file ==== libjpeg-turbo ==== Version update (2.0.6 -> 2.1.0) Subpackages: libjpeg8 libjpeg8-32bit libturbojpeg0 - version update to 2.1.0 lot of changes, see * https://github.com/libjpeg-turbo/libjpeg-turbo/releases/tag/2.0.90 * https://github.com/libjpeg-turbo/libjpeg-turbo/releases/tag/2.1.0 ==== libselinux ==== Subpackages: libselinux1 libselinux1-32bit selinux-tools - Remove Recommends for selinux-autorelabel. It's better to have this in the policy package itself (bsc#1181837) ==== libstorage-ng ==== Version update (4.3.106 -> 4.4.1) Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1 - merge gh#openSUSE/libstorage-ng#804 - added function Holder::get_devicegraph() - fixed typo - use in-class member initialization - 4.4.1 - merge gh#openSUSE/libstorage-ng#803 - support setting UUIDs for RAID, LUKS and more filesystems - 4.4.0 ==== memtest86+ ==== - Due to recent binutils update the gnu assembler defaults to generate a ".note.gnu.property" section. The linker happily picks it up to the output binary that offsets the real code entry and crashes at runtime. This patch discards the ".note.gnu.property" section. [bsc#1185272, memtest86+-5.31b-discard-note_gnu_property.patch] ==== ncurses ==== Version update (6.2.20210327 -> 6.2.20210424) Subpackages: libncurses6 ncurses-utils terminfo terminfo-base terminfo-iterm terminfo-screen - Add ncurses patch 20210424 + avoid using broken system macros for snprintf which interfere with _nc_SLIMIT's conditionally adding a parameter when the string-hacks configure option is enabled. + add a "all::" rule before the new "check" rule in test/Makefile.in - Add ncurses patch 20210418 + improve CF_LINK_FUNCS by ensuring that the source-file is closed before linking to the target. + add "check" rules for headers in c++, progs and test-directories. + build-fix for termsort module when configured with termcap (reports by Rajeev V Pillai, Rudi Heitbaum). - Add ncurses patch 20210417 + extend --disable-pkg-ldflags option to also control whether $LDFLAGS from the build is provided in -config and .pc files (Debian #986764). + fix some cppcheck warnings, mostly style, in ncurses and c++ libraries and progs directory. + fix off-by-one limit for tput's processing command-line arguments (patch by Hadrien Lacour). - Do not strip examples - Install available manual pages of examples as well - Add ncurses patch 20210403 + fix some cppcheck warnings, mostly style, in ncurses library and progs directory. + improve description of BSD-style padding in curs_termcap.3x + improved CF_C11_NORETURN macro, from byacc changes. + fix "--enable-leak" in CF_DISABLE_LEAKS to allow turning leak-checking off later in a set of options. + relax modification-time comparison in CF_LINK_FUNCS to allow it to accept link() function with NFS filesystems which change the mtime on the link target, e.g., several BSD systems. + call delay_output_sp to handle BSD-style padding when tputs_sp is called, whether directly or internally, to ensure that the SCREEN pointer is passed correctly (reports by Henric Jungheim, Juraj Lutter). - Correct offsets of patch ncurses-6.2.dif ==== patterns-media ==== Subpackages: patterns-media-rest_cd_core patterns-media-rest_dvd - Recommend systemd-coredump by the rest_dvd_core pattern: ensure systemd-coredump to be on the DVD. - Add udftools to the DVD (boo#1185343). ==== python-matplotlib ==== Subpackages: python38-matplotlib python38-matplotlib-cairo python38-matplotlib-gtk3 python38-matplotlib-tk - Add a required BuildRequires on tex(geometry.sty). ==== rubygem-listen ==== Version update (3.4.1 -> 3.5.1) - updated to version 3.5.1 * Bump required ruby version to v2.4.0 (#536) @cgunther ==== selinux-policy ==== Subpackages: selinux-policy-targeted - Added Recommends for selinux-autorelabel (bsc#1181837) - Prevent libreoffice fonts from changing types on every relabel (bsc#1185265). Added fix_libraries.patch - Transition unconfined users to ldconfig type (bsc#1183121). Extended fix_unconfineduser.patch ==== sg3_utils ==== Version update (1.45~815+5.6aa67ed -> 1.46) - Update to version 1.46: * sg_rep_pip: new utility: report provisioning initialization pattern command * sg_turs: estimated time-to-ready [spc6r03] - add --delay=MS option * sg_requests: substantial cleanup * sg_vpd: add Format presets and Concurrent positioning ranges - add hot-pluggable field in standard Inquiry [spc6r05] - fix vendor struct opts_t alignment * sg_inq: add hot-pluggable field in standard Inquiry * sg_dd: --verify : separate category for miscompare errors - --verify : oflag=coe continue on miscompares, counts them - add cdl= operand for command duration limit indexes - add oflag=nocreat and conv=nocreat : OFILE must exist - add iflag=00, ff, random flags - setup conditional auto rule for getrandom() - add command timeout after comma in time= operand * sg_get_elem_status: add ralwd bit sbc4r20a * sg_write_x: add dld bits to write(32) [sbc4r19a] * sg_rep_zones: print invalid write pointer LBA as -1 rather than 16 "f"s * sg_opcodes: improve handling of RWCDLP field * sg_ses: use fan speed factor field for calculation [ses4r04] - add --all (-a) option, same action as --join * sg_compare_and_write: add examples section to its manpage * sg_modes: document '-s' option (same as '-6') * sg_sanitize + sg_format: when --verbose given once report probable success; without --verbose 'no news is good news' * sg_zone: add Remove element and modify zones command * sg_raw: increase maximum data-in and data-out buffer size from 64 KB to 1 MB - fix --cmdfile= handling - add --nvm option to send commands from the NVM command set - add --cmdset option to bypass cdb heuristic - add --scan= first_opcode,last_opcode * sg_pt_freebsd: allow device names without leading /dev/ thus fix for regression introduced in rev 731 (ver: 1.43) * sg_pt_solaris+sg_pt_osf1: fix problem with clear_scsi_pt_obj() which needs to remember is_nvme and dev_fd values * sg_lib: add ZBC (2020) feature set entries * sg_lib: restore elements and rebuild command added * sg_lib,sg_pt: add partial_clear_scsi_pt_obj(), get_scsi_pt_cdb_len() and get_scsi_pt_cdb_buf() - add do_nvm_pt() for the NVM (sub-)command set - tweak transport error handling in Linux * sg_lib: Linux NVMe SNTL: add read, write and verify; synchronize cache and write same translations - add dummy start stop unit and test unit ready commands - wire cache mpage's WCE to nvme 'volatile write cache' - fix crash in sg_f2hex_arr() when fname not found * sg_lib: reprint cdb with illegal request sense key - asc/ascq match asc-num.txt @t10 20200708 [spc6r02] * gcc-10: suppress warnings * autoconf: upgrade version 2.69 to 2.70 * remove space from end of source lines for git-svn * testing/sg_mrq_testing: new, for blocking mrq usage * testing/sgs_dd: add evfd flags and eventfd processing * testing: remove master-slave terminology for sgv4 * examples: add nvme_read_ctl.hex and nvme_write_ctl.hex ==== tcsh ==== Version update (6.22.03 -> 6.22.04) Subpackages: tcsh-lang - Update to tcsh bug fix version V6.22.04 - 20210426 * Don't crash with 'bindkey "^0" clear-screen' (Karl Jeacle) * Fix $x:q:h and $x:q:t return the whole string for strings not containing / - Port patches * tcsh-6.16.00-norm-cmd.dif * tcsh-6.17.06-dspmbyte.dif * tcsh-6.18.03-colorls.dif * tcsh-6.22.02-local-dotlock.dif - Delete patch now upstream fixed * tcsh-6.22.03-unintentional.patch - Add keyring and signature * tcsh-6.22.04.tar.gz.asc * tcsh.keyring - Fix the fix tcsh-6.22.03-unintentional.patch * It changes the expected results - Add patch tcsh-6.22.03-unintentional.patch * fix unintentional bug of the head/tail modifiers ==== texlive ==== Version update (6.3.2 -> 6.3.3) Subpackages: libkpathsea6 libsynctex2 - Add patch source-r58686:r58919.dif * Upstream fix for mpost/luatex btex/etex - Make public wrapper change into mktex home directory if current directory is not accessible - Use -fsigned-char on non-Intel boxes for mendex and upmendex otherwise the sort.c results are wrong - Reenable pygmentex as now with python3 - Update to TeXLive 2021 * No poppler required anymore (hurray) * Uses its own xpdf based library - Update to biber 2.16 * perl(Unicode::Collate) >= 1.29 - Port patches mostly by correcting offsets * 0004-Add-ppc64-support-based-on-koriakin-GitHub-patchset.patch * biber-certs.dif * source-64.dif * source-configure.dif * source-dviutils.dif * source-ppc64.dif * source-warns.dif * source.dif - Remove patches now fixed upstream or not required anymore * source-fix-bool-poppler.patch * source-fix-const-poppler0.66.0.patch * source-overflow.dif * source-poppler-fix-dict-memleak.patch * source-poppler-use-std_string.patch * source-poppler.dif * source-poppler0.59.0.patch * source-poppler0.79.0.patch * source-poppler0.83.0.patch * source-poppler0.86.0.patch ==== texlive-specs-m ==== Version update (2020.182.20200202_pl5svn53958 -> 2021.185.20201001_pl4svn57354) - Reenable pygmentex as now with python3 - Remove patch de-macro_p2top3.dif now upstream - Port patches * kpathsea_cnf.dif * latexmk_conf.dif * lilyglyphs_p2top3.dif (now only shebang corrected) * luatex_cnf.dif * luaotfload_varfonts.dif * musixtex_various.dif * texdoc_cnf.dif * texlive-scripts_scripts.dif - Update to TeXLive 2021 ==== texlive-specs-n ==== Version update (2020.182.2.004svn48145 -> 2021.185.2.005svn58637) - Reenable pygmentex as now with python3 - Remove patch de-macro_p2top3.dif now upstream - Port patches * kpathsea_cnf.dif * latexmk_conf.dif * lilyglyphs_p2top3.dif (now only shebang corrected) * luatex_cnf.dif * luaotfload_varfonts.dif * musixtex_various.dif * texdoc_cnf.dif * texlive-scripts_scripts.dif - Update to TeXLive 2021 ==== unison ==== Version update (2.51.2 -> 2.51.4_rc2) - Update to version 2.51.4_rc2 remove Compatibility-with-OCaml-4.08.patch remove Compile-without-unsafe-string.patch remove Fix-for-lablgtk-2.18.6.patch remove Fix-warnings-raised-by-OCaml-4.08.1.patch - Remove ocaml_native_compiler conditional build native target unconditionally ==== webkit2gtk3 ==== Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 libwebkit2gtk3-lang typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Add webkit2gtk3-icu69.patch: Fix build with ICU 69: + ICU 69 deprecates ubrk_safeClone in favor of ubrk_clone. ==== wireless-regdb ==== Version update (20210407 -> 20210421) - Update to version 20210421: * wireless-regdb: update regulatory database based on preceding changes * wireless-regdb: re-add source url and info for CU ==== yast2 ==== Version update (4.4.1 -> 4.4.2) Subpackages: yast2-logs - Add to yast2 mixin Yast2::SecretAttributes for hiding sensitive information (bsc#1141017) - 4.4.2 - The location given to the Y2Issue::Issue constructor can be a string or a location object. ==== yast2-installation ==== Version update (4.4.4 -> 4.4.5) - Remove Yast::LanItems dependency (bsc#1185338) - 4.4.5 ==== yast2-network ==== Version update (4.4.5 -> 4.4.8) - Omit hidden networks from the list of wireless networks to be selected preventing the dialog to crash (bsc#1185372) - 4.4.8 - bsc#1185338 - Dropped LanItems, replaced by network-ng - 4.4.7 ==== zchunk ==== Version update (1.1.5 -> 1.1.9) - Update to version 1.1.9 * Handle zstd 1.4.7+ * Update documentation * unzck: require a *.zck extension * General bug fixes - Dropped upstream merged d2eae512bee09a4047cfe586de12f644d73b0736.patch - Add fix-test-argp.patch: Fix argp detection

1 0