September 2016 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Mariadb/mysql - zypper warning
by ianseeks 12 Sep '16

12 Sep '16

Hi Is this "failure" worth reporting to anyone? ( 59/101) Installing: mariadb-10.0.22-3.5.x86_64 ................................................................................................................................. [done] Additional rpm output: usermod: no changes Failed to try-restart mysql@.service: Unit name mysql@.service is not valid. Regards Ian -- Qt: 5.6.1 KDE Frameworks: 5.25.0 kf5-config: 1.0 KDE Plasma: 5.7.4 Kwin5: 5.7.4-152.2 Kernel: 4.7.2-2-default opensuse:tumbleweed:20160905 Nouveau: 1.0.12-1.4 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] 42.2 beta1 - An ocasion of "Failed to truncate file to its own size" on boot, 4.4.19-1-default
by Milan Zimmermann 11 Sep '16

11 Sep '16

I am wondering, did anyone get, in beta 1 on boot "Failed to truncate file to its own size: Read-only file system" Since I installed beta 1, three times, in the 10 days of daily booting (sometimes multiple) and operation, I received the message. The system boot does not continue (actually, in one case, this happened while system was running, and everything hang). I am not sure how to analyse and report it, e.g. what logs would keep this message and messages up to the issue. I would file a bug for this, but I do not know what supporting data I would put there. In terms of how the system got booted again: Once I just reset and it worked (I think). But the 2 other times multiple reset did not work. Booting from the install USB, and doing an update worked. I have since started using 4.4.15-1-default and it so far did not happen. But that may be a coincidence. Thanks Milan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Beta Firefox and Thunderbird
by Moby 11 Sep '16

11 Sep '16

I use beta versions of Mozilla Firefox and Thunderbird on Windows, to help with testing etc. I would like to do the same on SuSE Tumbleweed. I cannot find any repos containing the rpms, so I downloaded the versions from the Mozilla web site. Beta Firefox installation was a breeze, and I am able to use it on Tumbleweed just fine with no issues (other than product issues since this is Beta, which are issues I am seeking anyways). Beta Thunderbird though shows no scroll bars at all nor scroll arrows in the scroll region of the window. This does not happen on Windows. I suspect this is a Tumbleweed/XFCE issue and not a Thunderbird issue, since I see many references to these types of issues on Linux distros. However, I not been able to find a fix. Would anyone know the fix or what direction I should be looking in? Thank you in advance for your help, --Moby -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] New Tumbleweed snapshot 20160909 released!
by Dominique Leuenberger 11 Sep '16

11 Sep '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: Mesa (12.0.1 -> 12.0.2) appstream-glib (0.5.17 -> 0.6.2) ctags doxygen (1.8.11 -> 1.8.12) dracut emacs file-roller glibc (2.23 -> 2.24) glibc (2.23 -> 2.24) hdf5 libdbusmenu (12.10.3+bzr20160223 -> 16.04.0) libdvdnav libical (1.0.1 -> 2.0.0) libinput (1.4.1 -> 1.4.2) libopenraw openmpi (1.10.2 -> 1.10.3) patterns-openSUSE postfix (3.1.1 -> 3.1.2) sensors shotwell (0.23.5 -> 0.23.6) upower webkit2gtk3 (2.12.4 -> 2.12.5) === Details === ==== Mesa ==== Version update (12.0.1 -> 12.0.2) Subpackages: Mesa-devel Mesa-dri-devel Mesa-libEGL-devel Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 Mesa-libGLESv1_CM-devel Mesa-libGLESv1_CM1 Mesa-libGLESv2-2 Mesa-libGLESv2-devel Mesa-libglapi-devel Mesa-libglapi0 Mesa-libglapi0-32bit Mesa-libva libOSMesa-devel libOSMesa9 libOSMesa9-32bit libgbm-devel libgbm1 libgbm1-32bit libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_intel libwayland-egl-devel libwayland-egl1 libxatracker2 - update to 12.0.2 * fdo#69622 - eglTerminate then eglMakeCurrent crahes * fdo#89599 - symbol 'x86_64_entry_start' is already defined when building with LLVM/clang * fdo#91342 - Very dark textures on some objects in indoors environments in Postal 2 * fdo#92306 - GL Excess demo renders incorrectly on nv43 * fdo#94148 - Framebuffer considered invalid when a draw call is done before glCheckFramebufferStatus * fdo#96274 - [NVC0] Failure when compiling compute shader: Assertion `bb-<getFirst()-<serial >= bb-<getExit()-<serial' failed * fdo#96358 - SSO: wrong interface validation between GS and VS (regresion due to latest gles 3.1) * fdo#96381 - Texture artifacts with immutable texture storage and mipmaps * fdo#96762 - [radeonsi,apitrace] Firewatch: nothing rendered in scrollable (text) areas * fdo#96835 - "gallium: Force blend color to 16-byte alignment" crash with "-march=native -O3" causes some 32bit games to crash * fdo#96850 - Crucible tests fail for 32bit mesa * fdo#96908 - [radeonsi] MSAA causes graphical artifacts * fdo#96911 - webgl2 conformance2/textures/misc/tex-mipmap-levels.html crashes 12.1 Intel driver * fdo#96971 - invariant qualifier is not valid for shader inputs * fdo#97039 - The Talos Principle and Serious Sam 3 GPU faults * fdo#97207 - [IVY BRIDGE] Fragment shader discard writing to depth * fdo#97214 - X not running with error "Failed to make EGL context current * fdo#97225 - [i965 on HD4600 Haswell] xcom switch to ingame cinematics cause segmentation fault * fdo#97231 - GL_DEPTH_CLAMP doesn't clamp to the far plane * fdo#97307 - glsl/glcpp/tests/glcpp-test regression * fdo#97331 - glDrawElementsBaseVertex doesn't work in display list on i915 * fdo#97351 - DrawElementsBaseVertex with VBO ignores base vertex on Intel GMA 9xx in some cases * fdo#97426 - glScissor gives vertically inverted result * fdo#97476 - Shader binaries should not be stored in the PipelineCache * fdo#97567 - [SNB, ILK] ctl, piglit regressions in mesa 12.0.2rc1 + many other fixes from 12.0.1 ==== appstream-glib ==== Version update (0.5.17 -> 0.6.2) Subpackages: libappstream-builder8 libappstream-glib8 - Update openSUSE-appstream-process: + Do not include -failed.xml.gz: people complain about the additional ~ 100KB zypp downloads on a repodata refresh at 'no value for them'. The failed.xml.gz is not needed for regular operations, but was a great help for packagers to find out why their app was vetoed. They will need to find different ways to get this info. + Rename appdata-screenshots.tar to appdata-screenshots-$HASH.tar to help mirrorbrain offload this file to mirrors. - Add appstream-glib-lang.patch: Add -lang package as a dependency in order to properly detect translations. - Update to version 0.6.2: + New Features: - Add a hash function specifically designed for unique-ids. - Add AS_BUNDLE_KIND_CABINET. - Remove the inf parsing from appstream-glib. + Bugfixes: - Check if icon name is unset before checking the prefix. - Do not merge all LangPack entries. - Do not require an icon from LOCALIZATION kind. - Do not use the deprecated GNOME_COMPILE_WARNINGS. - Do not use the prefix check when parsing YAML. - Fix gcc shift warnings on 32 bit platforms. - Ignore system datadirs that are actually per-user. - Invalidate the unique-id if any of the parts are changed. - Make upgrade check for SPDX license string. - Pay attention to errors from libyaml (gh#hughsie/appstream-glib#129). - Update to version 0.6.1: + trivial: post release version bump. + Add Sugar as a valid desktop environment (gh#highsie/appstream-glib#118). + Do not save the 'X-' prefixed keys to the AppStream metadata. + correct issue in transifex link (gh#hughsie/appstream-glib#119). + trivial: Factor out a soon-to-be-shared function. + trivial: Add two more renamed desktop IDs. + Add two new GCC warnings and fix up signed/unsigned issues. + Be more careful choosing warning flags. + trivial: Fix some gtk-doc markup. + Add AsReview. + trivial: Remove AsReview.karma as it's implementation specific. + trivial: Update git.mk to latest upstream copy. + Port away from intltool. + Do not split up the main AudioVideo category. + Don't change ABI when built with/without gperf (gh#hughsie/appstream-glib#123). + Avoid unsatisfiable development dependency when built without libgcab (gh#hughsie/appstream-glib#122). + trivial: Post branch version bump. + Remove specific support for flatpak. + trivial: Fix some gtk-doc markup. + trivial: Add AS_BUNDLE_KIND_SNAP. + trivial: Add AS_BUNDLE_KIND_PACKAGE. + Add as_app_equal(). + Add as_app_set_branch(). + Include the architecture in the equality check. + Include the origin in the equality check. + Include the scope in the equality check. + Include the distribution system in the equality check. + trivial: Fix the origin name when using the symlink name. + trivial: Fix the flatpak scope when using the symlink name. + trivial: Show the unique ID when using 'appstream-util search'. + Add as_store_get_app_by_unique_id(). + Enable globbing in as_app_equal(). + Restrict addons to the same scope and bundle kind. + Include the version in the equality check. + Add as_utils_unique_id_build(). + Allow multiple components with the same AppStream ID in the AsStore. + trivial: Don't write invalid width and height properties. + trivial: Add some initial self tests for AS_STORE_ADD_FLAG_USE_UNIQUE_ID. + Skip DEP-11 tests when DEP-11 is not enabled. + as_store_from_file_internal: don't redundantly monitor files. + as_store_from_file_internal: set up path data for the file itself. + Use an array of application objects in the ID hash. + trivial: Use the unique ID in the dedupe logs. + trivial: Fix critical warning when parsing qm files without a domain. + Add support for Google .PAK file to extract the <lang> data for apps. + Always use wildcards when adding apps to the store. + Add a fast as_utils_unique_id_equal() to compare IDs for equality. + Add as_utils_unique_id_valid() and use it before parsing. + trivial: Fix as_utils_unique_id_equal() to work with multiple globs. + Support merge components. + Use a more relaxed unique-id match for merge components. + Add some more validation checks for keywords. + trivial: Use the existing quirk as it can be made useful again. + trivial: Parse the unique_id correctly when searching. + trivial: Check if the flatpak ID is valid before using. + Only subsume a safe subset from merge components. + trivial: Update to latest translations from transifex. + trivial: Switch from Transifex to Zanata. + trivial: Decompress .pak files when getting languages. + Don't include the version in the unique ID. + Don't include the architecture in the unique ID. + Allow subsuming each property individually. + Add SUSE-Public-Domain to License map (gh#hughsie/appstream-glib#126). + Add the TRANSLATE URL kind. + trivial: Fix some gtk-doc markup. + No validation failure for lots of releases. + trivial: Be a bit more helpful when reporting validation warnings. + trivial: Fix the comment text for 'help' when upgrading. + Print max caption length when validating. + trivial: Allow setting the output trusted mode using an environment variable. + trivial: Don't add a duplicate <developer_name> when it exists already. + Ensure predictable output order of XML attributes. + Support AppStream merge components. + Add support for application suggestions. + Make asglib read current component-type names. + yaml: Read all component types, not just desktop-apps. + Add console-app component type. + trivial: Fix validation of console-application components. + Release version 0.6.1. ==== ctags ==== - Own our update-alternatives symlink (bnc#994261) - Use conflict-free symlinks instead of touch files for placeholders. ==== doxygen ==== Version update (1.8.11 -> 1.8.12) - Update to 1.8.12 See changelog at http://www.stack.nl/~dimitri/doxygen/manual/changelog.html - update patch doxygen-dot-one-thread.patch ==== dracut ==== - fix boot issues using RAID, bnc#970215 ==== emacs ==== Subpackages: emacs-info emacs-nox emacs-x11 etags - Use standard filew permissions for ghost entries - Use %ext_man as manual page extensions - Fix yaosdd report (boo#994285) - emacs-24.4-glibc.patch: don't force system malloc, it doesn't work with glibc 2.24 - gmalloc.patch: fix portability bugs in gmalloc ==== file-roller ==== Subpackages: nautilus-file-roller - Drop genisoimage Requires: We no longer want to hard require it. ==== glibc ==== Version update (2.23 -> 2.24) Subpackages: glibc-32bit glibc-locale-32bit - Update to glibc 2.24 * The minimum Linux kernel version that this version of the GNU C Library can be used with is 3.2 * The pap_AN locale has been deleted * The readdir_r and readdir64_r functions have been deprecated * The type `union wait' has been removed * A new NSS action is added to facilitate large distributed system administration * The deprecated __malloc_initialize_hook variable has been removed from the API * The long unused localedef --old-style option has been removed * nextupl, nextup, nextupf, nextdownl, nextdown and nextdownf are added to libm * An unnecessary stack copy in _nss_dns_getnetbyname_r was removed (CVE-2016-3075) * Previously, getaddrinfo copied large amounts of address data to the stack, even after the fix for CVE-2013-4458 has been applied, potentially resulting in a stack overflow. getaddrinfo now uses a heap allocation instead (CVE-2016-3706) * The glob function suffered from a stack-based buffer overflow when it was called with the GLOB_ALTDIRFUNC flag and encountered a long file name (CVE-2016-1234) * The Sun RPC UDP client could exhaust all available stack space when flooded with crafted ICMP and UDP messages (CVE-2016-4429) * The IPv6 name server management code in libresolv could result in a memory leak for each thread which is created, performs a failing naming lookup, and exits (CVE-2016-5417) - startcontext-cantunwind.patch: mark __startcontext as .cantunwind (bsc#974800, BZ #20435) - Removed patches: * 0001-Updated-translations-for-2.23.patch * 0002-Regenerate-libc.pot-for-2.23.patch * 0003-Regenerated-configure-scripts.patch * 0004-x86_64-Set-DL_RUNTIME_UNALIGNED_VEC_SIZE-to-8.patch * 0005-Add-fts64_-to-sysdeps-arm-nacl-libc.abilist.patch * 0006-Don-t-use-long-double-math-functions-if-NO_LONG_DOUB.patch * 0007-NEWS-2.23-Fix-typo-in-bug-19048-text.patch * 0008-Update-NEWS.patch * 0009-sln-use-stat64.patch * 0010-Add-sys-auxv.h-wrapper-to-include-sys.patch * 0011-mips-terminate-the-FDE-before-the-return-trampoline-.patch * 0012-Use-HAS_ARCH_FEATURE-with-Fast_Rep_String.patch * 0013-Mention-BZ-19762-in-NEWS.patch * 0014-Define-_HAVE_STRING_ARCH_mempcpy-to-1-for-x86.patch * 0015-Or-bit_Prefer_MAP_32BIT_EXEC-in-EXTRA_LD_ENVVARS.patch * 0016-Fix-resource-leak-in-resolver-bug-19257.patch * 0017-math-don-t-clobber-old-libm.so-on-install-BZ-19822.patch * 0018-resolv-Always-set-resplen2-out-parameter-in-send_dg-.patch * 0019-S390-Save-and-restore-fprs-vrs-while-resolving-symbo.patch * 0020-S390-Extend-structs-La_s390_regs-La_s390_retval-with.patch * 0021-CVE-2016-3075-Stack-overflow-in-_nss_dns_getnetbynam.patch * 0022-configure-fix-test-usage.patch * 0023-Suppress-GCC-6-warning-about-ambiguous-else-with-Wpa.patch * 0024-nss_db-Propagate-ERANGE-error-if-parse_line-fails-BZ.patch * 0025-getnameinfo-Do-not-preserve-errno.patch * 0026-getnameinfo-Refactor-and-fix-memory-leak-BZ-19642.patch * 0027-getnameinfo-Reduce-line-length-and-add-missing-comme.patch * 0028-getnameinfo-Avoid-calling-strnlen-on-uninitialized-b.patch * 0029-getnameinfo-Return-EAI_OVERFLOW-in-more-cases-BZ-197.patch * 0030-hesiod-Remove-RCS-keywords.patch * 0031-hesiod-Always-use-thread-local-resolver-state-BZ-195.patch * 0032-hesiod-Avoid-heap-overflow-in-get_txt_records-BZ-200.patch * 0033-malloc-Remove-NO_THREADS.patch * 0034-Fix-malloc-threaded-tests-link-on-non-Linux.patch * 0035-malloc-Run-fork-handler-as-late-as-possible-BZ-19431.patch * 0036-malloc-Remove-malloc-hooks-from-fork-handler.patch * 0037-malloc-Add-missing-internal_function-attributes-on-f.patch * 0038-nss_dns-Fix-assertion-failure-in-_nss_dns_getcanonna.patch * 0039-nss_dns-Validate-RDATA-length-against-packet-length-.patch * 0040-resolv-nss_dns-Remove-remaining-syslog-logging-BZ-19.patch * 0041-nss_dns-Check-address-length-before-creating-addrinf.patch * 0042-nss_dns-Skip-over-non-PTR-records-in-the-netent-code.patch * 0043-resolv-Always-set-resplen2-out-parameter-in-send_vc-.patch * 0044-tst-audit4-tst-audit10-Compile-AVX-AVX-512-code-sepa.patch * 0045-Fix-tst-audit10-build-when-mavx512f-is-not-supported.patch * 0046-tst-audit10-Fix-compilation-on-compilers-without-bit.patch * 0047-strfmon_l-Use-specified-locale-for-number-formatting.patch * 0048-glob-Simplify-the-interface-for-the-GLOB_ALTDIRFUNC-.patch * 0049-CVE-2016-1234-glob-Do-not-copy-d_name-field-of-struc.patch * 0050-ldconfig-Do-not-remove-stale-symbolic-links-with-X-B.patch * 0051-Report-dlsym-dlvsym-lookup-errors-using-dlerror-BZ-1.patch * 0052-Fix-tst-dlsym-error-build.patch * 0053-Remove-trailing-newline-from-date_fmt-in-Serbian-loc.patch * 0054-Revert-Report-dlsym-dlvsym-lookup-errors-using-dlerr.patch * 0055-CVE-2016-3706-getaddrinfo-stack-overflow-in-hostent-.patch * 0056-Fix-strfmon_l-Use-specified-locale-for-number-format.patch * clntudp-call-alloca.patch * glibc-memset-nontemporal.diff * nis-initgroups-status.patch * nscd-gc-crash.patch * robust-mutex-deadlock.patch * strncat-avoid-array-bounds-warning.patch ==== glibc ==== Version update (2.23 -> 2.24) Subpackages: glibc-devel glibc-extra glibc-info glibc-locale nscd - Update to glibc 2.24 * The minimum Linux kernel version that this version of the GNU C Library can be used with is 3.2 * The pap_AN locale has been deleted * The readdir_r and readdir64_r functions have been deprecated * The type `union wait' has been removed * A new NSS action is added to facilitate large distributed system administration * The deprecated __malloc_initialize_hook variable has been removed from the API * The long unused localedef --old-style option has been removed * nextupl, nextup, nextupf, nextdownl, nextdown and nextdownf are added to libm * An unnecessary stack copy in _nss_dns_getnetbyname_r was removed (CVE-2016-3075) * Previously, getaddrinfo copied large amounts of address data to the stack, even after the fix for CVE-2013-4458 has been applied, potentially resulting in a stack overflow. getaddrinfo now uses a heap allocation instead (CVE-2016-3706) * The glob function suffered from a stack-based buffer overflow when it was called with the GLOB_ALTDIRFUNC flag and encountered a long file name (CVE-2016-1234) * The Sun RPC UDP client could exhaust all available stack space when flooded with crafted ICMP and UDP messages (CVE-2016-4429) * The IPv6 name server management code in libresolv could result in a memory leak for each thread which is created, performs a failing naming lookup, and exits (CVE-2016-5417) - startcontext-cantunwind.patch: mark __startcontext as .cantunwind (bsc#974800, BZ #20435) - Removed patches: * 0001-Updated-translations-for-2.23.patch * 0002-Regenerate-libc.pot-for-2.23.patch * 0003-Regenerated-configure-scripts.patch * 0004-x86_64-Set-DL_RUNTIME_UNALIGNED_VEC_SIZE-to-8.patch * 0005-Add-fts64_-to-sysdeps-arm-nacl-libc.abilist.patch * 0006-Don-t-use-long-double-math-functions-if-NO_LONG_DOUB.patch * 0007-NEWS-2.23-Fix-typo-in-bug-19048-text.patch * 0008-Update-NEWS.patch * 0009-sln-use-stat64.patch * 0010-Add-sys-auxv.h-wrapper-to-include-sys.patch * 0011-mips-terminate-the-FDE-before-the-return-trampoline-.patch * 0012-Use-HAS_ARCH_FEATURE-with-Fast_Rep_String.patch * 0013-Mention-BZ-19762-in-NEWS.patch * 0014-Define-_HAVE_STRING_ARCH_mempcpy-to-1-for-x86.patch * 0015-Or-bit_Prefer_MAP_32BIT_EXEC-in-EXTRA_LD_ENVVARS.patch * 0016-Fix-resource-leak-in-resolver-bug-19257.patch * 0017-math-don-t-clobber-old-libm.so-on-install-BZ-19822.patch * 0018-resolv-Always-set-resplen2-out-parameter-in-send_dg-.patch * 0019-S390-Save-and-restore-fprs-vrs-while-resolving-symbo.patch * 0020-S390-Extend-structs-La_s390_regs-La_s390_retval-with.patch * 0021-CVE-2016-3075-Stack-overflow-in-_nss_dns_getnetbynam.patch * 0022-configure-fix-test-usage.patch * 0023-Suppress-GCC-6-warning-about-ambiguous-else-with-Wpa.patch * 0024-nss_db-Propagate-ERANGE-error-if-parse_line-fails-BZ.patch * 0025-getnameinfo-Do-not-preserve-errno.patch * 0026-getnameinfo-Refactor-and-fix-memory-leak-BZ-19642.patch * 0027-getnameinfo-Reduce-line-length-and-add-missing-comme.patch * 0028-getnameinfo-Avoid-calling-strnlen-on-uninitialized-b.patch * 0029-getnameinfo-Return-EAI_OVERFLOW-in-more-cases-BZ-197.patch * 0030-hesiod-Remove-RCS-keywords.patch * 0031-hesiod-Always-use-thread-local-resolver-state-BZ-195.patch * 0032-hesiod-Avoid-heap-overflow-in-get_txt_records-BZ-200.patch * 0033-malloc-Remove-NO_THREADS.patch * 0034-Fix-malloc-threaded-tests-link-on-non-Linux.patch * 0035-malloc-Run-fork-handler-as-late-as-possible-BZ-19431.patch * 0036-malloc-Remove-malloc-hooks-from-fork-handler.patch * 0037-malloc-Add-missing-internal_function-attributes-on-f.patch * 0038-nss_dns-Fix-assertion-failure-in-_nss_dns_getcanonna.patch * 0039-nss_dns-Validate-RDATA-length-against-packet-length-.patch * 0040-resolv-nss_dns-Remove-remaining-syslog-logging-BZ-19.patch * 0041-nss_dns-Check-address-length-before-creating-addrinf.patch * 0042-nss_dns-Skip-over-non-PTR-records-in-the-netent-code.patch * 0043-resolv-Always-set-resplen2-out-parameter-in-send_vc-.patch * 0044-tst-audit4-tst-audit10-Compile-AVX-AVX-512-code-sepa.patch * 0045-Fix-tst-audit10-build-when-mavx512f-is-not-supported.patch * 0046-tst-audit10-Fix-compilation-on-compilers-without-bit.patch * 0047-strfmon_l-Use-specified-locale-for-number-formatting.patch * 0048-glob-Simplify-the-interface-for-the-GLOB_ALTDIRFUNC-.patch * 0049-CVE-2016-1234-glob-Do-not-copy-d_name-field-of-struc.patch * 0050-ldconfig-Do-not-remove-stale-symbolic-links-with-X-B.patch * 0051-Report-dlsym-dlvsym-lookup-errors-using-dlerror-BZ-1.patch * 0052-Fix-tst-dlsym-error-build.patch * 0053-Remove-trailing-newline-from-date_fmt-in-Serbian-loc.patch * 0054-Revert-Report-dlsym-dlvsym-lookup-errors-using-dlerr.patch * 0055-CVE-2016-3706-getaddrinfo-stack-overflow-in-hostent-.patch * 0056-Fix-strfmon_l-Use-specified-locale-for-number-format.patch * clntudp-call-alloca.patch * glibc-memset-nontemporal.diff * nis-initgroups-status.patch * nscd-gc-crash.patch * robust-mutex-deadlock.patch * strncat-avoid-array-bounds-warning.patch ==== hdf5 ==== Subpackages: libhdf5-100 libhdf5_hl100 - new hdf5_disable_testphdf5.patch to disable only testphdf5 for all arches and not all mpi tests for ppc64le tempo patch as long as boo#997252 not solved - temporarily disable mpi test for ppc64le ==== libdbusmenu ==== Version update (12.10.3+bzr20160223 -> 16.04.0) Subpackages: libdbusmenu-glib4 libdbusmenu-gtk3-4 - Use proper libdbusmenu 16.04.0 tarball directly from launchpad: + The old tarball's configure.ac happened to still use an old version, causing the .pc file to advertise insufficient capabilities. ==== libdvdnav ==== - BuildRequire dvdread >= 5.0.2 libdvdnav-dvdread.patch ==== libical ==== Version update (1.0.1 -> 2.0.0) - Update to version 2.0.0: + Lots of source code scrubbing. + RSCALE support (requires libicu). + CalDAV attachment support (draft-daboo-caldav-attachments). + Resurrect the Berkeley DB storage support. + Incorrect recurrence generation for weekly pattern (gh#libical/libical#83) + Handle RRULEs better. + Handle threading better. - Drop reproducible-generator.patch: fixed upstream. - Bump sonum to 2, following upstream (also update baselibs.conf). ==== libinput ==== Version update (1.4.1 -> 1.4.2) Subpackages: libinput-devel libinput-udev libinput10 - Update to new upstream release 1.4.2 * touchpad: on a non-clickpad, reset the motion history on nfingers change * touchpad: reset the edge scroll state on touch up if edge scroll is disabled * touchpad: always reset the motion history on finger changes ==== libopenraw ==== Subpackages: gdk-pixbuf-loader-libopenraw libopenraw1 - Update to GNOME 3.20.2 Fate#318572 ==== openmpi ==== Version update (1.10.2 -> 1.10.3) - Guard files not installed when building without __malloc_initialize_hook (glibc 2.24). Currently this is only the case for Tumbleweed. - Open MPI 1.10.3: * many upstream bug fixes, improvements, documentation updates ==== patterns-openSUSE ==== Subpackages: patterns-openSUSE-apparmor patterns-openSUSE-apparmor_opt patterns-openSUSE-base patterns-openSUSE-books patterns-openSUSE-console patterns-openSUSE-devel_C_C++ patterns-openSUSE-devel_basis patterns-openSUSE-devel_gnome patterns-openSUSE-devel_ide patterns-openSUSE-devel_java patterns-openSUSE-devel_kde patterns-openSUSE-devel_kde_frameworks patterns-openSUSE-devel_kernel patterns-openSUSE-devel_osc_build patterns-openSUSE-devel_perl patterns-openSUSE-devel_python patterns-openSUSE-devel_qt4 patterns-openSUSE-devel_qt5 patterns-openSUSE-devel_rpm_build patterns-openSUSE-devel_ruby patterns-openSUSE-devel_web patterns-openSUSE-dhcp_dns_server patterns-openSUSE-directory_server patterns-openSUSE-enhanced_base patterns-openSUSE-enhanced_base_opt patterns-openSUSE-file_server patterns-openSUSE-fonts patterns-openSUSE-fonts_opt patterns-openSUSE-games patterns-openSUSE-gateway_server patterns-openSUSE-generic_server patterns-openSUSE-gnome patterns-openSUSE-gnome_admin patte rns-openSUSE-gnome_basis patterns-openSUSE-gnome_basis_opt patterns-openSUSE-gnome_games patterns-openSUSE-gnome_ide patterns-openSUSE-gnome_imaging patterns-openSUSE-gnome_imaging_opt patterns-openSUSE-gnome_internet patterns-openSUSE-gnome_laptop patterns-openSUSE-gnome_multimedia patterns-openSUSE-gnome_multimedia_opt patterns-openSUSE-gnome_office patterns-openSUSE-gnome_office_opt patterns-openSUSE-gnome_utilities patterns-openSUSE-gnome_yast patterns-openSUSE-imaging patterns-openSUSE-imaging_opt patterns-openSUSE-kde patterns-openSUSE-kde_edutainment patterns-openSUSE-kde_games patterns-openSUSE-kde_ide patterns-openSUSE-kde_imaging patterns-openSUSE-kde_internet patterns-openSUSE-kde_multimedia patterns-openSUSE-kde_office patterns-openSUSE-kde_plasma patterns-openSUSE-kde_telepathy patterns-openSUSE-kde_utilities patterns-openSUSE-kde_utilities_opt patterns-openSUSE-kde_yast patterns-openSUSE-kvm_server patterns-openSUSE-lamp_server patterns-openSUSE-laptop patterns-openSUS E-lxde patterns-openSUSE-lxde_laptop patterns-openSUSE-lxde_office patterns-openSUSE-mail_server patterns-openSUSE-minimal_base patterns-openSUSE-minimal_base-conflicts patterns-openSUSE-misc_server patterns-openSUSE-multimedia patterns-openSUSE-multimedia_opt patterns-openSUSE-network_admin patterns-openSUSE-non_oss patterns-openSUSE-non_oss_opt patterns-openSUSE-office patterns-openSUSE-office_opt patterns-openSUSE-print_server patterns-openSUSE-remote_desktop patterns-openSUSE-rest_dvd patterns-openSUSE-sw_management patterns-openSUSE-sw_management_gnome patterns-openSUSE-sw_management_kde patterns-openSUSE-tabletpc patterns-openSUSE-technical_writing patterns-openSUSE-x11 patterns-openSUSE-x11_opt patterns-openSUSE-x11_yast patterns-openSUSE-xen_server patterns-openSUSE-xfce patterns-openSUSE-xfce_basis patterns-openSUSE-xfce_laptop patterns-openSUSE-xfce_office patterns-openSUSE-yast2_basis patterns-openSUSE-yast2_install_wf - Drop gnome-web-photo Recommends from gnome_utilities pattern. ==== postfix ==== Version update (3.1.1 -> 3.1.2) Subpackages: postfix-doc - update to 3.1.2: * Changes to make Postfix build with OpenSSL 1.1.0. * The makedefs script ignored readme_directory=pathname overrides. Fix by Todd C. Olson. * The tls_session_ticket_cipher documentation says that the default cipher for TLS session tickets is aes-256-cbc, but the implemented default was aes-128-cbc. Note that TLS session ticket keys are rotated after 1/2 hour, to limit the impact of attacks on session ticket keys. ==== sensors ==== Subpackages: libsensors4 libsensors4-32bit libsensors4-devel - add lm_sensors-3.4.0-sensors-detect-add-ftsteutates-support.patch for ftsteutates support (Fujitsu Skylake boards) ==== shotwell ==== Version update (0.23.5 -> 0.23.6) Subpackages: shotwell-lang - Update to version 0.23.6: + Fix locale-dependent times. + Use nl_langinfo instead of custom LConv. + Fix renaming of tags and saved searches. + Improve message shown on empty camera. + Make thm a recognized extension for JPEG files. + Bugs fixed: bgo#716533, bgo#718796, bgo#731480, bgo#759246. + Updated translations. ==== upower ==== Subpackages: libupower-glib3 typelib-1_0-UpowerGlib-1_0 - Align BuildRequires with what configure looks for and version them: - Replace dbus-1-glib-devel, libgudev-1_0-devel, libimobiledevice-devel, libusb-devel and pkgconfig(udev) - with libtool, pkgconfig(dbus-glib-1), pkgconfig(gio-2.0), pkgconfig(gio-unix-2.0), pkgconfig(glib-2.0), pkgconfig(gobject-2.0), pkgconfig(gudev-1.0), pkgconfig(libimobiledevice-1.0), pkgconfig(libplist) and pkgconfig(libusb-1.0). - Stop exporting V=1, we do debugging locally, so lets not clutter buildlogs. ==== webkit2gtk3 ==== Version update (2.12.4 -> 2.12.5) Subpackages: libjavascriptcoregtk-4_0-18 libwebkit2gtk-4_0-37 typelib-1_0-JavaScriptCore-4_0 typelib-1_0-WebKit2-4_0 webkit2gtk-4_0-injected-bundles - Update to version 2.12.5: + Fix a regression introduced in 2.12.4 that caused a hang in the network process after a load failure. + Fix several crashes and rendering issues. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] openSUSE Tumbleweed – Review of the Weeks 2016/36
by Dominique Leuenberger / DimStar 10 Sep '16

10 Sep '16

Dear Tumbleweed users and hackers, Another week with 4 snapshots has passed, sadly some issues managed to sneak in but, as you are used to by Tumbleweed already, we managed to resolve the issues on the mailing list in no time and made sure that upcoming snapshots get the fixes asap. The snapshots published were 0901, 0905, 0907 and 0908. Notable updates in those snapshots: * Mozilla Firefox 48.0.2 and Thunderbird 45.3.0 * Binutils 2.27 * gcc 6.2.1 – The entire distro was rebuilt with this compiler * zsh: was responsible for some users having trouble on login. An update had been provided in the update channel and snapshot 0908 had the definitive fix for it * ntp: the daemon was attempting to reuse the proper user instead of root, as per configuration. Unfortunately, this also caused some headaches, especially notable in long bootups. This change was reverted in 0908 as well * GStreamer 1.8.3 * Pulseaudio brings ofono headset support Unfortunately, none of the two issues we had this week were spotted by openQA: * zsh issues were missed, as all tests run with the default shell configured for the test users, being bash. * ntp issue was not seen as it ‘only’ causes a slow down on boot. openQA is, at this time, not usable as a performance regression test tool (there is too much variation with the virtualisation tools and generally well booked servers) At this point a big ‘thank you’ to all the people involved in tracking down the culprits and discussing solutions for as long as it was needed. Upcoming changes: * Mesa 12.0.2 * Appstream: our apps will receive translation information in the metadata * glibc 2.24 * Linux kernel 4.7.3 * KDE Frameworks 5.26.0 * KDE Applications 16.08.1 * GNOME 3.22 (actually 3.21.91) entered Staging:G Quite a list getting together here – and I had the feeling we were slowed down by various OBS and openQA issues… this clearly seems not to hinder us as much as it feels like. Cheers, Dominique

1 0

[opensuse-factory] Package for sale - Guake
by Bjørn Lie 10 Sep '16

10 Sep '16

A year ago I tried to sell guake, this is a new try on -factory: X11:terminals/guake is for sale. If anyone wants to step up and take over maintenance of it feel free to request it in the devel-project. The package itself is fairly low in terms of effort needed, but as I no longer use guake myself, and hence neglect it a bit, new hands are preferred. Note that in the last year guake have lagged several releases behind, so there might be a bit more todo in order to bump to current. I declined forward of guake to Leap, both in .1 and now. A new maintainer can reopen that of course. So if you are a Guake user who wants to see Guake in Leap, now is your time to shine. I will file a deletereq towards TW in the near future if package is not picked up by anyone. //Bjørn - Zaitor For ref https://lists.opensuse.org/opensuse-packaging/2015-08/msg00098.html -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20160908 released!
by Dominique Leuenberger 09 Sep '16

09 Sep '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: gegl-unstable gstreamer-editing-services (1.8.2 -> 1.8.3) gstreamer-validate (1.8.2 -> 1.8.3) hexchat libstorage (2.26.6 -> 2.26.8) ntp perl-Variable-Magic (0.59 -> 0.60) python-keyring (9.0 -> 9.3.1) python3-gst (1.8.2 -> 1.8.3) vm-install (0.8.56 -> 0.8.57) yast2-kdump (3.1.40 -> 3.1.41) yast2-network (3.1.168 -> 3.1.169) yast2-users (3.1.56 -> 3.1.57) zsh === Details === ==== gegl-unstable ==== Subpackages: gegl-0_3 libgegl-0_3-0 - Add gegl-unstable-include-stdlib.patch: include stdlib.h for realpath(). ==== gstreamer-editing-services ==== Version update (1.8.2 -> 1.8.3) Subpackages: libges-1_0-0 typelib-1_0-GES-1_0 - Update to version 1.8.3 (boo#996937): + Revert 3 commits: - "video-source: Expose deinterlace-[fields, mode, tff] child properties". - "container: Handle setting children properties that need prefixing". - "formatter: Prefix all children properties in the XML formatter". ==== gstreamer-validate ==== Version update (1.8.2 -> 1.8.3) Subpackages: libgstvalidate-1_0-0 - Update to version 1.8.3 (boo#996937): + Fix Validate plugin paths mixup. + No execute ON_ADDITION if a previous action is executed playback_time. - Drop gstreamer-validate-correctplugindir.patch: Fixed upstream. ==== hexchat ==== Subpackages: hexchat-lang - Modified migrate-configuration-from-xchat.patch Add hexchat-migrate-sh Realizing the migration job with shell script(bnc#989961) ==== libstorage ==== Version update (2.26.6 -> 2.26.8) Subpackages: libstorage-ruby libstorage7 - improved message for creating volumes with a filesystem but without a mountpoint (bsc#996208) - 2.26.8 - merged pull request to not set boot flag on DASDs (see bsc#935127) - 2.26.7 ==== ntp ==== Subpackages: ntp-doc - Keep the parent process alive until the daemon has finished initialisation, to make sure that the PID file exists when the parent returns (ntp-daemonize.patch). - Update to 4.2.8p8 (bsc#982056): * CVE-2016-4953, bsc#982065: Bad authentication demobilizes ephemeral associations. * CVE-2016-4954, bsc#982066: Processing spoofed server packets. * CVE-2016-4955, bsc#982067: Autokey association reset. * CVE-2016-4956, bsc#982068: Broadcast interleave. * CVE-2016-4957, bsc#982064: CRYPTO_NAK crash. - Change the process name of the forking DNS worker process to avoid the impression that ntpd is started twice. (bsc#979302, ntp-processname.patch). - Don't ignore SIGCHILD because it breaks wait() (boo#981422, ntp-sigchld.patch). - ntp-wait does not accept fractional seconds, so use 1 instead of 0.2 in ntp-wait.service (boo#979981). - Separate the creation of ntp.keys and key #1 in it to avoid problems when upgrading installations that have the file, but no key #1, which is needed e.g. by "rcntp addserver". - Fix the TZ offset output of sntp during DST. (bsc#951559, ntp-sntp-dst.patch) - Add /var/db/ntp-kod (bsc#916617). - Add ntp-ENOBUFS.patch to limit a warning that might happen quite a lot on loaded systems (bsc#956773). - Don't wait for 11 minutes to restart ntpd when it has died (boo#894031). - Update to 4.2.8p7 (bsc#977446): * CVE-2016-1547, bsc#977459: Validate crypto-NAKs, AKA: CRYPTO-NAK DoS. * CVE-2016-1548, bsc#977461: Interleave-pivot * CVE-2016-1549, bsc#977451: Sybil vulnerability: ephemeral association attack. * CVE-2016-1550, bsc#977464: Improve NTP security against buffer comparison timing attacks. * CVE-2016-1551, bsc#977450: Refclock impersonation vulnerability * CVE-2016-2516, bsc#977452: Duplicate IPs on unconfig directives will cause an assertion botch in ntpd. * CVE-2016-2517, bsc#977455: remote configuration trustedkey/ requestkey/controlkey values are not properly validated. * CVE-2016-2518, bsc#977457: Crafted addpeer with hmode > 7 causes array wraparound with MATCH_ASSOC. * CVE-2016-2519, bsc#977458: ctl_getitem() return value not always checked. * integrate ntp-fork.patch * Improve the fixes for: CVE-2015-7704, CVE-2015-7705, CVE-2015-7974 - Restrict the parser in the startup script to the first occurrance of "keys" and "controlkey" in ntp.conf (boo#957226). - Depend on pps-tools-devel to provide timepps.h header to enable Linux PPSAPI support to make GPS devices usefull. (boo#977563) - CVE-2015-8158, bsc#962966: potential infinite loop in ntpq - CVE-2015-8138, bsc#963002: Zero Origin Timestamp Bypass - CVE-2015-7978, bsc#963000: Stack exhaustion in recursive traversal of restriction list. - CVE-2015-7979, bsc#962784: off-path denial of service on authenticated broadcast mode - CVE-2015-7977, bsc#962970: restriction list NULL pointer dereference - CVE-2015-7976, bsc#962802: 'ntpq saveconfig' command allows dangerous characters in filenames - CVE-2015-7975, bsc#962988: nextvar() missing length check in ntpq - CVE-2015-7974, bsc#962960: Missing key check allows impersonation between authenticated peers - CVE-2015-7973, bsc#962995: replay attack on authenticated broadcast mode - CVE-2015-5300, bsc#951629: MITM attacker can force ntpd to make a step larger than the panic threshold - update to 4.2.8p6 * fixes low- and medium-severity vulnerabilities 4.2.8p6: CVE-2015-8158 CVE-2015-8138 CVE-2015-7978 CVE-2015-7979 CVE-2015-7977 CVE-2015-7976 CVE-2015-7975 CVE-2015-7974 CVE-2015-7973 4.2.8p5: CVE-2015-5300 * bug fixes - Explicitely run /usr/sbin/sntp to synchronize in start-ntpd. When run as cron job, /usr/sbin/ is not in the path, which caused the synchronization to fail. (boo#962318) - Fix ntp-4.2.6p2-ntpq-speedup-782060.patch to not pick arbitraty port numbers (bsc#782060). - Update to 4.2.8p4 to fix several security issues (bsc#951608): * CVE-2015-7871: NAK to the Future: Symmetric association authentication bypass via crypto-NAK * CVE-2015-7855: decodenetnum() will ASSERT botch instead of returning FAIL on some bogus values * CVE-2015-7854: Password Length Memory Corruption Vulnerability * CVE-2015-7853: Invalid length data provided by a custom refclock driver could cause a buffer overflow * CVE-2015-7852 ntpq atoascii() Memory Corruption Vulnerability * CVE-2015-7851 saveconfig Directory Traversal Vulnerability * CVE-2015-7850 remote config logfile-keyfile * CVE-2015-7849 trusted key use-after-free * CVE-2015-7848 mode 7 loop counter underrun * CVE-2015-7701 Slow memory leak in CRYPTO_ASSOC * CVE-2015-7703 configuration directives "pidfile" and "driftfile" should only be allowed locally * CVE-2015-7704, CVE-2015-7705 Clients that receive a KoD should validate the origin timestamp field * CVE-2015-7691, CVE-2015-7692, CVE-2015-7702 Incomplete autokey data packet length checks * obsoletes ntp-memlock.patch. - Add a controlkey line to /etc/ntp.conf if one does not already exist, to allow runtime configuration via ntpq. - Use SHA1 instead of MD5 for symmetric keys (bsc#905885). - Improve runtime configuration: * Read keytype from ntp.conf * Don't write ntp keys to syslog. - Fix legacy action scripts to pass on command line arguments. - Remove ntp.1.gz, it wasn't installed anymore. - Remove ntp-4.2.7-rh-manpages.tar.gz and only keep ntptime.8.gz. The rest is partially irrelevant, partially redundant and potentially outdated (bsc#942587). - Remove "kod" from the restrict line in ntp.conf (bsc#944300). - Add "addserver" as a new legacy action. - Fix the comment regarding addserver in ntp.conf (bnc#910063). - Use ntpq instead of deprecated ntpdc in start-ntpd (bnc#936327). - Add a controlkey to ntp.conf to make the above work. - Don't let "keysdir" lines in ntp.conf trigger the "keys" parser. - Disable mode 7 (ntpdc) again, now that we don't use it anymore. - Update to version 4.2.8p3 which incorporates all security fixes and most other patches we have so far (fate#319040). More information on: http://archive.ntp.org/ntp4/ChangeLog-stable - Disable chroot by default (bnc#926510). - Enable ntpdc for backwards compatibility (bnc#920238). - update to 4.2.8p2 * fixes CVE-2015-1798, CVE-2015-1799 (medium-severity vulnerabilities involving private key authentication) * bug fixes and enhancements * New script: update-leap - /bin/logger is needed for runtime configuration (bnc#924451). - update to 4.2.8p1 * fixes CVE-2014-9297, CVE-2014-9298 * over 30 bugfixes and improvements - update to 4.2.8 * fixes CVE-2014-9293, CVE-2014-9294, CVE-2014-9295, CVE-2014-9296 * changed Internal NTP Era counters * ntpdc responses disabled by default * over 1100 issues resolved between the 4.2.6 branch and 4.2.8 - adjusted patches to fit 4.2.8p1: ntp-segfault_on_invalid_device.patch bnc#506908.diff MOD_NANO.diff - removed obsolete / now-in-upstream patches: ntpd-maxmonmen.patch ntp-code-cleanup.patch ntp-sntp-recverr.patch bnc#817893.patch ntp-CVE-2014-9295.patch ntp-CVE-2014-9296.patch - changes to spec file: * added --datadir (for private perl module needed by ntp scripts) and --html-dir (html docs now get installed by "make install") to configure options * script ntp-wait has moved in source tree - *.service: Do not start ntpd when running on containers or when CAP_SYS_TIME was dropped from the default capability set ( see SYSTEMD-SYSTEM.CONF(5) for details) - Explicitely run /usr/sbin/sntp to synchronize in start-ntpd. When run as cron job, /usr/sbin/ is not in the path, which caused the synchronization to fail. (boo#901751) - Add ntp.NetworkManager: install NetworkManager dipatcher hook: if the DHCP Server delivers NTP Servers, accept those and configure NTP using the information (boo#900982). - Enable avahi support - bnc#910764: VU#852879 ntp security fixes * A potential remote code execution problem was found inside ntpd. The functions crypto_recv() (when using autokey authentication), ctl_putdata(), and configure() where updated to avoid buffer overflows that could be exploited. (CVE-2014-9295) * Furthermore a problem inside the ntpd error handling was found that is missing a return statement. This could also lead to a potentially attack vector. (CVE-2014-9296) - ntp-CVE-2014-9295.patch and ntp-CVE-2014-9296.patch will be obsoleted by the upcoming update to version 4.2.8. - fix typo in version check regarding /usr/lib/initscripts/legacy-actions to fix build for <= 13.1 - Re-enable the ntptimeset legacy init script action (bnc#893406). - conf.ntpd.service: Must run with PrivateTmp set to true - Ensure systemd services conflict with systemd-timesyncd.service present in upcoming systemd releases. - Try to fix broken migration from openSUSE-13.1 - Forward-port some bugs that got fixed for SLE11 (bnc#831311): * bnc#817893 * bnc#482349 * bnc#817893.patch - Cleanup with spec cleaner for better readability - Remove conditionals for < 12.2 distros as it does not work on them anyway. - fix start-ntpd again: service is now called ntpd, not ntp - Remove /var/run/ntp from the package: http://lists.opensuse.org/opensuse-packaging/2014-04/msg00046.html - Fix Provides/Obsoletes of package aliases. - Add /usr/sbin/rc* links. - Stay enabled across sysv to systemd migrations (bnc#875490). - fix "start-ntp addserver": start-ntp has no "status" method - Remove empty insserv call whic hhad only caused an error message - Correct 50-ntp.list to include ntpd.service - Restart nptd if failed or aborted (FATE#315133) - Service unit files are no executables - Use correct ntp-wait script from source tar ball (bnc#864193) - Implement new ntp-wait.service to provide time-sync.target - A few cleanups on the new start script of ntpd - Add missing systemd %pre macro - Add systemd configuration and start script - bnc#863815, ntp-sntp-recverr.patch: Get sntp to recognize socket errors, so that it skips unreachable destinations immediately instead of trying to reach them for more than five minutes before finally timing out. This patch will probably be obsoleted by the next major upgrade, because the current development release takes a different approach to get a quick answer from one of the specified servers. - CVE-2013-5211, bnc#857195: restrict query, configuration, modification access from world by default. Avoids that ntp can be used as a DDoS amplifier. - bnc#838458 ntp start script does not update /var/lib/ntp/etc/localtime file if /etc/localtime is symlink - Build with -DOPENSSL_LOAD_CONF , ntp must respect and use the system's openssl configuration. - fix build with automake-1.13 - bnc#797351 - ntpd "listen-on" directive support is missing/broken; unable to restrict/secure listening IPs - bnc#793012 - NTP default to 'sync time on startup' conflicts with NetworkManager - disable Undisciplined Local Clock in default conf file (bnc#784760) - Speedup ntpq (bnc#782060) +ntp-4.2.6p2-ntpq-speedup-782060.patch - bnc#450196 - ext3 - recovering journal on / on first boot on new kernel/fresh system updates - bnc#774553 - ntp initscript: hwclock: With --noadjfile, you must specify either --utc or --localtime - logrotate is not strictly required for operation of ntp so change it to Suggested. That way the minimal installation doesn't draw in cron and postfix. - Created the correct link to /run/ntp - Openssl wanted but not properly detected, fixed. - license update: (MIT and BSD-3-Clause and BSD-4-Clause) and GPL-2.0 Properly categorise licenses and sync with Fedora declaration - bnc#758253 - L3: ntp fails if host has more than 1024 IP-addresses ntp#1180 - ntpd won't start with more than 1000 interfaces - Remove superfluous remove of acconfig.h while build. - BuildRequire autoconf to avoid implicit dependency for post-11.4 systems. - Remove call to suse_update_config macro for post-11.4 systems. - BuildRequire fdupes for post-10.1 systems. - Do not call autoreconf for pre-10.2 systems. - Update to version 4.2.6p5. - ntpd * Updated "nic" and "interface" IPv6 address handling to prevent mismatches with localhost [::1] and wildcard [::] which resulted from using the address/prefix format (e.g. fe80::/64) * Fix orphan mode stratum incorrectly counting to infinity * Orphan parent selection metric updated to includes missing ntohl() * Non-printable stratum 16 refid no longer sent to ntp * Duplicate ephemeral associations suppressed for broadcastclient and multicastclient without broadcastdelay * Exclude undetermined sys_refid from use in loopback TEST12 * Exclude MODE_SERVER responses from KoD rate limiting * Include root delay in clock_update() sys_rootdisp calculations * get_systime() updated to exclude sys_residual offset (which only affected bits "below" sys_tick, the precision threshold) * sys.peer jitter weighting corrected in sys_jitter calculation - ntpq * -n option extended to include the billboard "server" column * IPv6 addresses in the local column truncated to prevent overruns - Update to version 4.2.6p4. - Build system * Fix checking for struct rtattr * Upgrade required version of autogen and libopts for building from our source code repository - ntpd * Back-ported several fixes for Coverity warnings from ntp-dev * Fix a rare boundary condition in UNLINK_EXPR_SLIST() * Allow "logconfig =allall" configuration directive * Bind tentative IPv6 addresses on Linux * Correct WWVB/Spectracom driver to timestamp CR instead of LF * Improved tally bit handling to prevent incorrect ntpq peer status reports * Exclude the Undisciplined Local Clock and ACTS drivers from the initial candidate list unless they are designated a "prefer peer" * Prevent the consideration of Undisciplined Local Clock or ACTS drivers for selection during the 'tos orphanwait' period� * Prefer an Orphan Mode Parent over the Undisciplined Local Clock or ACTS drivers * Improved support of the Parse Refclock trusttime flag in Meinberg mode * Back-port utility routines from ntp-dev: mprintf(), emalloc_zero() * Code cleanup in libntpq - ntpdc * Fix timerstats reporting - ntpdate * Reduce time required to set clock * Allow a timeout greater than 2 seconds - sntp * Backward incompatible command-line option change: - l/--filelog changed -l/--logfile (to be consistent with ntpd) - Documentation * Update html2man. Fix some tags in the .html files * Distribute ntp-wait.html - Remove superfluously used NTPD_PID_NOPREFIX from init script. - Refresh patches to apply with no offset. - bnc#730374 - Hardware Clock does not get synchronized - add libtool as buildrequire to avoid implicit dependency - bnc#656509 - don't use --bind on /var/lib/ntp/proc - bnc#699724 - ntpdate was replaced with a dud script - The default timeout for sntp is to long. This can stop booting - bnc#689070 - ntp post install script always removes /etc/sysconfig/ntp - bnc#688529 - (ntp) ntpq and ntpdc command history broken - bnc#695598 - "Started sntp" in /var/log/messages - fix "rcntp ntptimeset" * never try to syncronize with local clocks (127.127.*), which led to sntp blocking until timeout elapsed (and probably blocking boot sequence for ~5 min per device..) - fix DOS line breaks in some doc files - fix/improve init script * related to bugzilla 688132 * "rcntp ntptimeset" could not parse servers from ntp.conf when IP proto was specified (server [-4|-6] hostname) * "rcntp ntptimeset" is now using ip proto parameter (-4|-6) if it's set in NTPD_OPTIONS and skip servers where the opposite proto is defined - replace remove-ntpdate.diff with sed script - don't effectively zap existing /etc/sysconfig/ntp - while at it, simplify /etc/sysconfig/ntp update - improve NTP_PARSE_DEVICE documentation for /etc/sysconfig/ntp - refresh all patches with offsets and fuzz - updated the sntp syntax also in our ntpdate script (bnc#658255#c2) - update to version 4.2.6p3 * main feature, it really ! updates the time, old version was miscalculating the offset based on t21 and t34 - require $network startup before ntp. This is not enforced via $network_fs when no nfs and cifs is enabled - bnc#657194 - compile with --enable-ntp-signd - bnc#658799 - ntp init script makes /proc readonly, blocking login - bnc#658255 - ntpd is not working and sntp complains about unknown options - update to 4.2.6p2 * Major code clean up. 1. The protostats statistics files have been very useful in exposing little twitches and turns when something hiccups, like a broken PPS signal. Most of what used to be syslog messages are now repackaged as protostats messages with optional syslog as well. 2. Close inspection of the clock discipline behavior at long poll intervals (36 h) showed it not doing as well as it should. 3. Autokey. The enhanced error checking was becoming a major pain. A way was found to toss out gobs of ugly fat code and replace the function with a much simpler and more comprehensive scheme. 4. The interface code for the kernel PPS signal was not in sync with the kernel code itself. Some error checks were duplicated and some ineffective. 5. The flake restrict bit turned out to be really interesting, especially with symmtric modes and of those especially those using Autokey. * Documentation updates - New old feature: sync time on startup. If not needed NTPD_FORCE_SYNC_ON_STARTUP must be set to no in /etc/sysconfig/ntp - Handle /var/run as tmpfs - Set time by starting ntp via ntptimeset - rcntp timeset now gets the time via sntp inmediately - fix read-only mount of proc in chroot - bnc#574885 - XEN is using many network interfaces and stopping and restarting XEN instances results in ntpd error "Cannot find existing interface for address ...". - enable parallel build - update to ntp-4.2.4p8 to fix bnc#550316 - VUL-0: ntp DoS - bnc#557716 - NTP PLL does not converge based on https://support.ntp.org/bugs/show_bug.cgi?id=1219 - Also fix multiple mount on multiple "rcntp start" invocations - Really fix the multiple mount bug in ntp init script (bnc#517222) - bnc#517222 ? Minor patch for ntp init-script - Add ntp-4.2.4p7-autoconf.patch to fix build failure. - bnc#515629 - NM_ONLINE_TIMEOUT does not work with parallel boot - bnc#521044 - ntp init script: /etc/init.d/ntp: line 70: return: can only `return' from a function or sourced script - bnc#506908 - ntptrace doesn't work as non root user - update to 4.2.4p7: * [Sec 1151] Remote exploit if autokey is enabled - CVE-2009-1252. * [Bug 1187] Update the copyright date. * [Bug 1191] ntpd fails on Win2000 - "Address already in use" after fix for [Sec 1149]. * ntp.isc.org -> ntp.org cleanup. * [Bug 1178] Use prior FORCE_DNSRETRY behavior as needed at runtime, add configure --enable-ignore-dns-errors to be even more stubborn * [Bug 784] Make --enable-linuxcaps the default when available * [Bug 1179] error messages for -u/--user and -i lacking droproot * Updated JJY reference clock driver from Takao Abe * [Bug 1071] Log a message and exit before trying to use FD_SET with a descriptor larger than FD_SETSIZE, which will corrupt memory * On corruption of the iface list head in add_interface, log and exit * [Bug 1172] 4.2.4p7-RC{3,4} fail to build on linux. * flock-build script unportable 'set -m' use removed * [Bug 1167] use gcc -Winit-self only if it is understood * [Bug 787] Bug fixes for 64-bit time_t on Windows * [Bug 813] Conditional naming of Event * [Bug 1147] System errors should be logged to msyslog() * [Bug 1155] Fix compile problem on Windows with VS2005 * [Bug 1156] lock_thread_to_processor() should be declared in header * [Bug 1157] quiet OpenSSL warnings, clean up configure.ac * [Bug 1158] support for aix6.1 * [Bug 1160] MacOS X is like BSD regarding F_SETOWN * [Sec 1144] limited buffer overflow in ntpq. CVE-2009-0159 * [Sec 1149] use SO_EXCLUSIVEADDRUSE on Windows * [Bug 1131] UDP sockets should not use SIGPOLL on Solaris. * build system email address cleanup * [Bug 774] parsesolaris.c does not compile under the new Solaris * [Bug 873] Windows serial refclock proper TTY line discipline emulation * [Bug 1014] Enable building with VC9 (in Visual Studio 2008, Visual C++ 2008, or SDK) * [Bug 1117] Deferred interface binding under Windows works only correctly if FORCE_DNSRETRY is defined * [BUG 1124] Lock QueryPerformanceCounter() client threads to same CPU * DPRINTF macro made safer, always evaluates to a statement and will not misassociate an else which follows the macro. - bnc#468685 - ntpd causes 16 wakeups per second - bnc#492304 - ntpd man page refers to package xntp-doc (which does not exist) - bnc#495496 ? ntp misses prereq: /sbin/chkconfig ==== perl-Variable-Magic ==== Version update (0.59 -> 0.60) - updated to 0.60 see /usr/share/doc/packages/perl-Variable-Magic/Changes 0.60 2016-09-06 22:30 UTC + Chg : A large chunk of boilerplate XS code, which is also used in other XS modules, has been factored out of the main .xs file to a collection of .h files in the xsh subdirectory. + Fix : [RT #128989] : Bleadperl v5.25.3-266-g1d7e644 breaks V::M. Len magic is no longer called for negative array indices fetches, so the relevant tests are now skipped. Thanks Andreas Koenig for reporting. ==== python-keyring ==== Version update (9.0 -> 9.3.1) - update to 9.3.1: * Link to the new Gitter chat room is now in the readme. * Issue #235: ``kwallet`` backend now returns string objects instead of ``dbus.String`` objects, for less surprising reprs. * Minor doc fixes. - update to 9.3: 9.3 --- * Pull Request #226: In SecretService backend, unlock individual entries. 9.2.1 ----- * Issue #230: Don't rely on dbus-python and instead defer to SecretStorage to describe the installation requirements. 9.2 --- * Issue #231 via #233: On Linux, ``secretstorage`` is now a declared dependency, allowing recommended keyring to work simply after installation. 9.1 --- * Issue #83 via #229: ``kwallet`` backend now stores the service name as a folder name in the backend rather than storing all passwords in a Python folder. - Adjust Requires - Use pypi.io for Source url ==== python3-gst ==== Version update (1.8.2 -> 1.8.3) - Update to version 1.8.3 (boo#996937): + No changes, versionbump only. ==== vm-install ==== Version update (0.8.56 -> 0.8.57) - bsc#989468 - vm-install does not support aarch64 - Version 0.8.57 ==== yast2-kdump ==== Version update (3.1.40 -> 3.1.41) - AutoYaST: Write <general> and <crash_kernel> sections correctly. Imported settings will not be overwritten by proposal. (bnc#995750) - 3.1.41 ==== yast2-network ==== Version update (3.1.168 -> 3.1.169) - bnc#988157 - disable DHCP autoconfiguration in installer when an interface configuration is provided via linuxrc - 3.1.169 ==== yast2-users ==== Version update (3.1.56 -> 3.1.57) - AutoYaST: Ignore Users without UID while checking for duplicate UIDs (bnc#996823) - 3.1.57 ==== zsh ==== - Read /etc/profile as zsh again. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Cannot enter accented characters in KDE5/Qt apps
by auxsvr 09 Sep '16

09 Sep '16

Hello, Running latest KDE frameworks, Qt and applications on Tumbleweed, I'm unable to enter greek accented characters as a normal user. If I launch the same application as root, I can input accented characters. Any ideas? -- Regards, Peter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] questions about openQA packages for TW in openQA:stable project
by Normand 09 Sep '16

09 Sep '16

While trying to build openQA in stable project (1) for TW x86_64 and ppc64le (2), I identified at least two problems: * os-autoinst has a missing commit * openQA has unresolvable perl-Mojolicious-Plugin-Bootstrap3 is the stable project (1) really the one to use to download packages as suggested in docs (3) I tried in (2) to bypass these two problems but hit another missing JavaScript::Minifier::XS module when building openQA. Do I have to continue trials adding packages in my local branch ? (1) https://build.opensuse.org/project/show/devel:openQA:stable <= failing for TW. (2) https://build.opensuse.org/project/show/home:michel_mno:branches:devel:open… (3) https://github.com/os-autoinst/openQA/blob/master/docs/Installing.asciidoc -- Michel Normand -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Choices of btrfs-convert
by Constant Brouerius van Nidek 09 Sep '16

09 Sep '16

After seeing the advantages of the btrfs system I want to convert my second system to btrfs from ext4. Looked into the command and are more than bewildered by the options of choice. I would like to get a system which is similar as the system which I installed recently and which surprised me with the default btrfs. >From the ten options the only I understand is the rollback option. Everything else is too high for me. Which options are set for a default new installation? Which options should I choose for a convert? -- Qt: 5.6.1 KDE Frameworks: 5.25.0 kf5-config: 1.0 KDE Plasma: 5.7.4 Kernel: 4.7.2-2-default opensuse:tumbleweed:20160907 Linux User 183145 working on a Pentium IV . -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] looking for script hacker to update online release notes script
by Ludwig Nussel 09 Sep '16

09 Sep '16

Hi, The release notes pages on doc.opensuse.org are created by an old shell script¹ by downloading rpms and extracting them in a directory. After switching from fetching only released packages to ones directly created from github² the script now confuses packages from different distributions. So e.g. the 42.1 page actually displays 42.2³. Anyone up to fix or rewrite the script? Only condition is that it needs to run on SLE11SP4. [1] https://github.com/openSUSE/release-notes-openSUSE/blob/Leap_42.2/tools/bin… [2] http://build.opensuse.org/project/show/Documentation:Auto [3] https://doc.opensuse.org/release-notes/x86_64/openSUSE/Leap/42.1 cu Ludwig -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.com/ SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] zypper dup - kernel-devel and kernel-syms not cleant up on minor kernel updates
by René Krell 09 Sep '16

09 Sep '16

When updating the kernel, if it has just been recompiled due to a dependency change, zypper removes old packages, but just some of them, not all. This requires further manual steps to clean up. Example: The following 4 NEW packages are going to be installed: kernel-default 4.7.2-2.2 kernel-default-devel 4.7.2-2.2 kernel-devel 4.7.2-2.2 kernel-syms 4.7.2-2.2 ... The following 2 packages are going to be REMOVED: kernel-default 4.7.2-2.1 kernel-default-devel 4.7.2-2.1 Is there a logical reason for this? Why not remove also kernel-devel-4.7.2-2.1 and kernel-syms-4.7.2-2.1 for the above example, if there are the newer packages installed? René -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] [42.2 Beta] kernel version
by Johannes Weberhofer 09 Sep '16

09 Sep '16

Dear all! Currently the kernel version is 4.4.19. Is it planned to upgrade to a newer version? I'm asking because I have had problems with Kernels before 4.5 on new HP EliteDesk 2G machines regarding the display drivers (check https://bugzilla.suse.com/show_bug.cgi?id=974884 ). These problems were solved with kernel 4.6 and I have seen that some additional problems (there were some warnings in the journal which did not cause a visible effect) have been fixed with kernel 4.7. I think upgrading the kernel would solve many problems for users with newer PCs or Laptops with the Haswell chipset. Best regards, Johannes -- Johannes Weberhofer Weberhofer GmbH, Austria, Vienna -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 14

[opensuse-factory] New Tumbleweed snapshot 20160907 released!
by Dominique Leuenberger 09 Sep '16

09 Sep '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: gstreamer (1.8.2 -> 1.8.3) gstreamer-plugins-bad (1.8.2 -> 1.8.3) gstreamer-plugins-base (1.8.2 -> 1.8.3) gstreamer-plugins-good (1.8.2 -> 1.8.3) gstreamer-plugins-ugly (1.8.2 -> 1.8.3) gstreamer-rtsp-server (1.8.2 -> 1.8.3) libktorrent (2.0 -> 2.0.1) libpng16 (1.6.24 -> 1.6.25) libserf (1.3.8 -> 1.3.9) perl-Net-DNS (1.06 -> 1.06_03) pulseaudio spice-vdagent telepathy-qt5 (0.9.6.1 -> 0.9.7) wine (1.9.17 -> 1.9.18) === Details === ==== gstreamer ==== Version update (1.8.2 -> 1.8.3) Subpackages: gstreamer-devel gstreamer-utils libgstreamer-1_0-0 libgstreamer-1_0-0-32bit typelib-1_0-Gst-1_0 - Update to version 1.8.3 (boo#996937): + Fix stepping in PAUSED state in certain circumstances. + Fix jackaudiosink hang when exiting. + Fix udpsrc receiving multicast packets not only from the selected multicast group. + Fix unnecessary decoding of unselected streams in GES. + Fix (multi)udpsink randomly not sending to clients. + Fix ALL\_BOTH probes not considering EVENT\_FLUSH. + Fix average input rate calculations in queue2. + Fix various locking issues causing deadlock in adaptivedemux. + Fix gst-libav encoders to correctly produce codec\_data in caps. + Add Wayland, Windows and Rasberry Pi support to the QML GL video sink. + Add support for building with OpenH264 1.6. + Add support for controlling deinterlacing in GES video sources. + Bugs fixed: bgo#769802, bgo#768649, bgo#766970, bgo#768141, bgo#767688, bgo#763770, bgo#767413, bgo#739289, bgo#762330. + Updated translations. - Drop separate spec file for gstreamer-doc. Due to this drop all conditionals for splitting out doc build. Also drop docbook-toys, docbook-utils, texlive-latex, texlive-latex-doc and transfig BuildRequires. Add doc subpackage to gstreamer spec and pass enable gtk-doc to configure. Note that we are building a much leaner doc package now. - Following the above, drop pre_checkin script, gstreamer-no-gtk-doc-for-reals.patch and gstreamer-revert-bogus-automake-version.patch and stop passing NOCONFIGURE, no longer needed. - Conditionally apply translations-update-upstream and gnome-patch-translation BuildRequires and macro for non-openSUSE only. ==== gstreamer-plugins-bad ==== Version update (1.8.2 -> 1.8.3) Subpackages: libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbadbase-1_0-0 libgstbadvideo-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstgl-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgsturidownloader-1_0-0 libgstwayland-1_0-0 - Disable libbs2b support when building on SLE. - Update to version 1.8.3 (boo#996937): + Bugs fixed: bgo#767492, bgo#769376, bgo#736227, bgo#768160, bgo#767553, bgo#761260, bgo#763044, bgo#763081, bgo#756866, bgo#768771, bgo#766662, bgo#766163, bgo#768146, bgo#766663, bgo#767792, bgo#767492, bgo#767635. + Updated translations. ==== gstreamer-plugins-base ==== Version update (1.8.2 -> 1.8.3) Subpackages: gstreamer-plugins-base-devel libgstallocators-1_0-0 libgstapp-1_0-0 libgstaudio-1_0-0 libgstaudio-1_0-0-32bit libgstfft-1_0-0 libgstpbutils-1_0-0 libgstriff-1_0-0 libgstrtp-1_0-0 libgstrtsp-1_0-0 libgstsdp-1_0-0 libgsttag-1_0-0 libgsttag-1_0-0-32bit libgstvideo-1_0-0 libgstvideo-1_0-0-32bit typelib-1_0-GstAllocators-1_0 typelib-1_0-GstApp-1_0 typelib-1_0-GstAudio-1_0 typelib-1_0-GstFft-1_0 typelib-1_0-GstPbutils-1_0 typelib-1_0-GstRtp-1_0 typelib-1_0-GstRtsp-1_0 typelib-1_0-GstSdp-1_0 typelib-1_0-GstTag-1_0 typelib-1_0-GstVideo-1_0 - Update to version 1.8.3 (boo#996937): + Bugs fixed: bgo#767689, bgo#768991, bgo#767712, bgo#768566, bgo#768249, bgo#766970, bgo#768361, bgo#768178, bgo#757472, bgo#767859. + Updated translations. ==== gstreamer-plugins-good ==== Version update (1.8.2 -> 1.8.3) Subpackages: gstreamer-plugins-good-extra - Update to version 1.8.3 (boo#996937): + Bugs fixed: bgo#769773, bgo#762208, bgo#769514, bgo#747275, bgo#768509, bgo#768232, bgo#768623, bgo#768195, bgo#768268, bgo#753760, bgo#767980, bgo#766025, bgo#767680, bgo#767496. + Updated translations. ==== gstreamer-plugins-ugly ==== Version update (1.8.2 -> 1.8.3) - Update to version 1.8.3 (boo#996937): + Updated translations. ==== gstreamer-rtsp-server ==== Version update (1.8.2 -> 1.8.3) - Update to version 1.8.3 (boo#996937): + g-i: pass compiler env to g-ir-scanner. - Changes from version 1.8.2: + rtsp-session: RFC2326 does not allow a space between ; and timeout in the Session header. + rtsp-stream: - Fix crash on cleanup with shared media and multiple udpsrc. - Always bind to ANY when address is a multicast address and not only on Windows. - Rename package to gstreamer-rtsp-server. Align with the other gstreamer packages. Also obsolete and provide the previous ones to ease updates. ==== libktorrent ==== Version update (2.0 -> 2.0.1) Subpackages: libktorrent-devel libktorrent6 libktorrent6-lang - libktorrent 2.0.1: * Fix ui lags and hangs when downloading to ntfs partition ==== libpng16 ==== Version update (1.6.24 -> 1.6.25) Subpackages: libpng16-16 libpng16-16-32bit libpng16-compat-devel libpng16-devel - update to 1.6.25: Reject oversized iCCP profile immediately. Conditionally compile png_inflate(). Don't install pngcp; it conflicts with pngcp in the pngtools package. Added MIPS support (Mandar Sahastrabuddhe < ==== libserf ==== Version update (1.3.8 -> 1.3.9) Subpackages: libserf-1-1 libserf-devel - Apache Serf 1.3.9: * serf is now Apache Software Foundation project * fix various build issues * resolve a bucket (aka "memory") leak when a request bucket is destroyed before it is morphed into an aggregate bucket * reset state variables when resetting connection * fix types of passed, but unused batons * fix some usages of the openssl BIO api * improve handling of bad data in the response state line * support more overrides via SCons arguments * adapt to OpenSSL 1.1.x api - drop upstream patches: libserf-1.3.x-fix-comment-style.patch libserf-1.3.x-fix-deflate-buckets-test.patch ==== perl-Net-DNS ==== Version update (1.06 -> 1.06_03) - update to pre-release 1.06_03 to fix taint check issue with SpamAssassin ==== pulseaudio ==== Subpackages: libpulse-devel libpulse-mainloop-glib0 libpulse0 libpulse0-32bit pulseaudio-bash-completion pulseaudio-esound-compat pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-jack pulseaudio-module-lirc pulseaudio-module-x11 pulseaudio-module-zeroconf pulseaudio-utils pulseaudio-utils-32bit - Stop passing --disable-bluez5-ofono-headset when using bluez5. ==== spice-vdagent ==== - Fix crash when changing guest display's resolution (bsc#997236) 8c465007-vdagentd-fixes-small-leak.patch f97751fa-revert-uinput-fix-small-leak-of-screen_info.patch ==== telepathy-qt5 ==== Version update (0.9.6.1 -> 0.9.7) - add libtelepathy-qt5-service0 to baselibs.conf - Update to 0.9.7 - Dependencies: * CMake minimum version bumped to 2.8.12. - Enhancements: * Various documentation fixes and improvements. * Service library is now a shared library with own ABI versioning. * Implemented BaseConnectionContactsInterface::getContactByID(). * Reimplemented BaseChannelGroupInterface class - Has new future-proof API. - Has documentation for all methods. - Flags Properties and MembersChangedDetailed now always ON. * Added service-side Debug Interface implementation. * Added service-side Connection ClientTypes interface. * Added service-side Connection ContactCapabilities interface. * Implemented service-side FileTransfer Interface: - Well documented and covered with tests! - Supports IPv4 and IPv6 socket types with localhost access control. - Supports custom sockets and access control. * Added IODevice class, which is interesting for all CMs that have backend, that accepts a QIODevice for file transfers. * Other improvements. - API changes: * Service-side of ChannelGroup Interface redone with different API. - Fixes: * Fixed build with glibc-2.20+ * Fixed build with GStreamer-1.5.1+ * Added missing link to QtTest in tests. * Added missing link to glib2 in Farstream. * Fixed hash calculation of QList<ChannelClassSpec> for Qt-5.6. * fd.o #91659: CMake now search for Python 2, rather than Python 3. * fd.o #95376: Removed usage of deprecated QDBusArgument stream operators (fixes build with Qt-5.7 beta and (probably) Qt-5.8+). * fd.o #65981: Fixed build with Ninja (cmake). * Fixed memory leak in DBusError. * Fixed BaseConnection::createChannel() ".Requested" property processing. * Fixed BaseChannelGroupInterface::removeMembers(). * Fixed BaseChannelGroupInterface::groupFlagsChanged() signal emission. * Fixed CreationTimestamp property in BaseChannelRoomInterface. * Fixed device management in IncomingFileTransferChannel. * Fixed device management in OutgoingFileTransferChannel. * BaseConnection now properly closes channels on disconnect. * BaseConnection and BaseChannel debug output now respects Tp::enableDebug(). * Other small fixes. - removed obsolete patch telepathy-qt5-gst-1_6.patch, now included upstream - set minimum required cmake version to 2.8.12 ==== wine ==== Version update (1.9.17 -> 1.9.18) Subpackages: wine-32bit - Updated to 1.9.18 development snapshot - Support for multiple kernel drivers in a single process. - More WebServices reader support. - Various improvements in joystick support. - Some more work towards the Direct3D command stream. - GDI performance improvements. - Improved IME window handling. - Compatibility fixes in the clipboard support. - Various bug fixes. - updated winetricks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] YaST: highlights of development sprint 24
by Ancor Gonzalez Sosa 08 Sep '16

08 Sep '16

Yesterday we published a new blog post about YaST development. This time it comes with some bonus gems. https://lizards.opensuse.org/?p=11959 Enjoy. -- Ancor González Sosa YaST Team at SUSE Linux GmbH -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20160905 released!
by Dominique Leuenberger 08 Sep '16

08 Sep '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: ModemManager NetworkManager-gnome aria2 (1.26.0 -> 1.26.1) biosdevname blog btrfsprogs (4.7 -> 4.7.1) dracut gcr gdk-pixbuf git (2.9.3 -> 2.10.0) gnome-control-center gnome-maps (3.20.3 -> 3.20.3.1) gnome-menus intltool kernel-source kiwi (7.03.82 -> 7.03.92) konsole libcap (2.22 -> 2.25) libgnomesu libical libpwquality libreoffice multipath-tools (0.6.2+suse20160805.dcfa37d -> 0.6.2+suse20160826.4abd547) nano (2.6.3 -> 2.7.0) nautilus (3.20.2 -> 3.20.3) ntp obs-service-format_spec_file (20160202 -> 20160406) orc (0.4.25 -> 0.4.26) pam perl-DBD-mysql (4.035 -> 4.036) python-requests (2.10.0 -> 2.11.1) spice-gtk systemd tiff virtualbox (5.1.4_k4.7.2_1 -> 5.1.4_k4.7.2_2) vsftpd yast2-installation (3.1.213 -> 3.1.214) yast2-packager (3.1.116 -> 3.1.117) yast2-security (3.2.2 -> 3.2.3) yast2-slp (3.1.9 -> 3.1.10) zsh === Details === ==== ModemManager ==== Subpackages: ModemManager-bash-completion ModemManager-devel libmm-glib0 typelib-1_0-ModemManager-1_0 - Drop bnc878066-serial-ports-on-the-IO-card-are-not-responding.patch: No longer needed. ==== NetworkManager-gnome ==== Subpackages: NetworkManager-connection-editor libnm-gtk0 typelib-1_0-NMGtk-1_0 - Drop nm-applet-build-don-t-try-to-build-bluetooth-widget-with-bluez5.patch: Fixed in upstream. - Add nm-applet-fix-missing-translation.patch: Fix missing translation in ce-page-team.ui(bsc#988533). - Add NetworkManager-wrongly-placed-brace.patch: fix wrongly placed brace. - Update to GNOME 3.20 Fate#318572 - Drop nm-applet-build-don-t-try-to-build-bluetooth-widget-with-newer.patch: Fixed in upstream. - Rebase nm-applet-build-don-t-try-to-build-bluetooth-widget-with-bluez5.patch. - Rebase nm-applet-probe-radius-server-cert.patch. - Rebase nm-applet-private-connection.patch. - Add NetworkManager-appindicator.changes. - Add NetworkManager-appindicator.spec. - Add NetworkManager-gnome-no-firewalld.patch. - Add nm-applet-app-indicator.patch. - Add nm-icons-appindicator.tar.gz. - Add pre_checkin.sh. - Add nm-applet-build-don-t-try-to-build-bluetooth-widget-with-bluez5.patch + BlueZ 5 supported is default, disable the bluetooth plugin when BlueZ 5 is used.(bnc#876552) + Add bluez Requires - Update to version 1.0.10: + Bluetooth page in connection editor is now populated with available Bluetooth devices. + Fix a possible agent crash when cancelling the secrets request. + Updated translations. - Rebase nm-applet-private-connection.patch. - Split nm-connection-editor into a separate package (NetworkManager-connection-editor), which is then recommended by NetworkManager-gnome and NetworkManager-appindicator. The VPN plugins should then require connection editor, as that's what they're actually extending. As a result, NetworkManager-appindicator users would receive the option to install those plugins without conflicts. - Update to version 1.0.8: + Added hotspot support to the editor. + Password widgets now emits a signal for secret flag changes. + The connection validation errors are now communicated in a tooltip. + The editor is now able to edit the VLAN flags. + Several bug fixes. + Updated translations. - Rebase nm-applet-probe-radius-server-cert.patch. - Align the name of the appdata file with the desktop file: rename org.gnome.nm-connection-editor.appdata.xml to nm-connection-editor.appdata.xml - Own %{_datadir}/appdata to fix build in Leap 42.1. - Add dual spec file for building appindicator support - Add nm-applet-app-indicator.patch: introduce appindicator support. - Update to version 1.0.6: + Added option to set MTU of Team devices. + Added AppData for nm-connection-editor. + Build fixes. + Updated Czech, Polish and Hungarian translations. - Toggle with_cacert_patch to 1: the patch has been rebased. - Update to version 1.0.4: + Setting MTU for a bond device is now supported. + Connecting to a wireless network from the NetworkManager applet no longer results in an attempt to create system-wide connections. This fixes the ability to connect to a wireless network for non-privileged user. + The master interface name is used instead of master connection UUID for slave connections created with nm-connection-editor. This fixes compatibility of the ifcfg configuration files with the legacy network service. + It is now possible to specify an interface name instead of a MAC address when editing a connection using nm-connection-editor. + The WWAN connections now have IPv6 enabled by default. + libnm-gtk includes functions for password storage selection, which eases implementation of password GUI for VPN plugins and other users. - Rebase nm-applet-probe-radius-server-cert.patch and nm-applet-probe-radius-server-cert.patch. - Toggle with_cacert_patch to 0: the cacert patch is currently disabled in NetworkManager (boo#938198). - Update to version 1.0.2: + The applet is no longer started in GNOME 3. + STP controls are no longer displayed if STP is disabled. + Improved accessibility for screen reader users. + Multiple bugs fixed, including crashes. + Updated translations. - Add with_cacert_patch condition. When enabled: + Add NetworkManager(cacert-patch) Requires + Apply nm-applet-probe-radius-server-cert.patch + This needs to be toggled whenever NetworkManager is updated and the nm-probe-radius-server-cert.patch there is not rebased yet. - Refresh and enable nm-applet-probe-radius-server-cert.patch - Update to version 1.0.0: + Added support for editing Bluetooth mobile broadband connections. + Added support for IPv6 mobile broadband connections. + Allow IPv6-only configuration for more connection types. + The applet and editor are no longer shown in GNOME 3, which has its own network indicator and control panel. - Rebase NetworkManager-gnome-no-firewalld.patch. - Disable nm-applet-probe-radius-server-cert.patch for now: needs rebase (possibly only in NetworkManager itself). - Add NetworkManager-gnome-no-firewalld.patch: Allow to build without firewalld integration (which openSUSE does not offer, boo#897636). - Pass --without-firewalld to configure, to disable integration. - Added patches: - Add nm-applet-build-don-t-try-to-build-bluetooth-widget-with-newer.patch + Since the plugin API no longer exists(bnc#876552). - Add nm-applet-build-network-manager-applet-add-rules-for-BlueZ-.patch + BlueZ 5 supported is default, disable the bluetooth plugin when BlueZ 5 is used(bnc#876552). + Add bluez Requires - Rebase nm-applet-probe-radius-server-cert.patch. - Update to version 0.9.10.0: + Added controls for IPv6 privacy extensions. + Added support for VPN hints for new/additional secrets during connection. + Added support for Data Center Bridging and FibreChannel over Ethernet configuration. + Improved connections to new hidden WiFi networks. + Allow slaves VLANs/slaves of more device types. + Added support for changing password flags. + Passwords/secrets now default to user-agent storage instead of system-wide storage. + Added support for editing Team connections. + Rework CA certificate warnings to be less annoying. - Rebase nm-applet-private-connection.patch. - Disable nm-applet-probe-radius-server-cert.patch: needs further investigation. - Update to version 0.9.8.10: + Fixed the applet to not show the PIN unlock dialog even if the PIN was saved in the keyring. + Fixed a GSettings-related warning when using GLib 2.40. - Update to version 0.9.8.9: + Changed the default configuration of WPA Enterprise EAP certificate lookup to not use the system CA store by default, since this turns out to be a bad default. + We no longer try to build the bluetooth widget when using newer versions of gnome-bluetooth (that no longer support plugins). + Updated translations. - Drop gnome-bluetooth-devel BuildRequires: on GNOME 3.11.x, the bluetooth widget is no longer supported. - Update to version 0.9.8.8: + nm-applet is now started under GNOME 3 again (but never acts as a "secret agent" under GNOME Shell). This fixes the lack of password dialogs in some GNOME-3-based sessions (bgo#709410), and fixes the lack of a mobile broadband PIN unlock dialog under GNOME Shell. + Fixed a warning when closing the VPN import/export dialogs. + Made nm-applet use g_debug(); set G_MESSAGES_DEBUG=nm-applet to see logging now. + Updated translations. - Rebase nm-applet-private-connection.patch for 0.9.8.4 (bnc#751211) - Add nm-applet-probe-radius-server-cert.patch to probe the certificate the RADIUS server (bnc#574266) - Update to version 0.9.8.4: + Fix handling of bonding mode and VLAN parent fields in editor. + Fix crash when failing to read secrets from the keyring. + nm-applet is no longer autostarted under GNOME. + Updated translations. - Add dbus(org.freedesktop.secrets) Requires (bnc#828387). - Update to version 0.9.8.2: + Conversion from gnome-keyring to libsecret; libsecret is now required to build. + Editor no longer overwrites master interface name with the master UUID. + Fix crashes when using ModemManager 0.7/0.8. + Fix allowed values for VLAN ID and MTU in the editor. + Preserve existing PPP LCP echo failure and interval values. + Ensure Bridge STP checkbox values are saved. + Hide BSSID for Wi-Fi Ad-Hoc connections (it's autocreated by the kernel). + Ensure IPv6 next-hop/gateway values are sane. + Fix problems with the MAC address combo box on various pages. + Only request secrets from the user when allowed to. + Fix running with GTK+ 2.x. + Fix signal icons to work with newer libpng. + Don't show Wi-Fi Security combo when not required. + Improve applet icon size handling. + Show more helpful errors when VPN plugins are not installed. + Updated translations. - Replace gnome-keyring-devel BuildRequires with pkgconfig(libsecret-unstable), following upstreams port to libsecret. - Update to version 0.9.8.0: + Add manpages for nm-applet and nm-connection-editor. - Stop passing --disable-more-warnings to configure, it builds fine without it now. - Exchange NetworkManager-devel BuildRequires for pkgconfig(NetworkManager), pkgconfig(libnm-glib), pkgconfig(libnm-glib-vpn) and pkgconfig(libnm-util) BuildRequires, following what configure checks for. - Update to version 0.9.7.997: + Ensure AP mode connections are treated as Hotspot too. + Build fixes. + Editor fixes. + Editor: hide widgets that aren't supported for VPNs on the general page. + Updated translations. - Update to version 0.9.7.995: + Rework connection editor main UI to better support different connection types + Add connection editor support for WiMAX, Infiniband, Bond, and VLAN connections + Suggest "seen BSSIDs" for WiFi BSSID entry + Add connection editor support for autoconnect VPN connections + Add a "General" page to the connection editor and move general options to it + Fix GNOME Bluetooth plugin for recent versions of GNOME Bluetooth and the GNOME Control Center + Add LTE and HSPA+ icons to the applet + Fix connection editor command-line passing to already-running instance + Suppress nm-applet notifications when GNOME Shell is running + Ensure 802.1x passwords default to "agent owned" and not system-wide + Default to using system CA certificates for new connections + Add support for ModemManager 0.7/0.8 + Fix a crash when editing IP addresses with the XIM input framework + Fix handling of connection Zone when firewalld is active + Fix saving a connection when ignoring a missing CA certificate - Add pkgconfig(mm-glib) BuildRequires: dependency for ModemManager support. - Add pkgconfig(gudev-1.0) BuildRequires: new depdendency. - Add gobject-introspection-devel BuildRequires: new dependency. - Split new subpackage typelib-1_0-NMGtk-1_0. - Fix nm-applet-private-connection.patch: Allow to select a BT paired devices a PAN/NAP device. Without this fix, gnome-control-center crashes at that moment. - Update to version 0.9.6.4: + Better cooperation with GNOME Shell + Fix connection editing from external tools when the editor is already open + Backport new libnm-gtk API to work with recent GNOME Control Center versions + Updated translations. - Update to version 0.9.6.2: + Fix GNOME Bluetooth plugin DUN modem detection and setup. - Update to version 0.9.6.0: + Only handle VPN secrets for GNOME Shell 3.3 and lower. - Update to version 0.9.5.96: + Recognize PKCS#12 certificates imported from Firefox + Pre-fill CDMA username/password in the mobile broadband wizard. - Update to version 0.9.5.95: + Fixed UI mnemonics. + Various crash and stability fixes. + Allow appending DNS servers and domains in automatic addressing mode. + Fix defaults for PPP echo values. + Show IPv6 addressing page for VPN plugins that support it. + Port to GSettings and split out 0.8 -> 0.9 migration code into standalone tool. - Pass --disable-migration to configure: no supported openSUSE version has NetworkManager <= 0.8 anymore, so we do not need the migration tool. - Replace gconf schema handling macros with glib variants. - Drop gconf2-devel BuildRequires: without the migration tool, there is no need to access gconf anymore. - Add nm-applet-private-connection.patch: Create private connections if the user is not authorized. Some distributions do not allow the normal user to create a system connection without the polkit authentication. This commit checks the polkit policy and creates private connections if the user is not authorized. [bnc#751211]. - Add polkit-devel BuildRequires, as the above patch makes use of it. - Add gnome-common BuildRequires and call to gnome-autogen.sh, as above patch touches the build system. - Update to version 0.9.4.1: + No change compared to 0.9.4.1. - Changes from version 0.9.4.0: + Do not run our own secret agent when GNOME Shell is running. + Several bug fixes. + Updated translations. - Drop NetworkManager-gnome-OnlyShowIn.patch: this was implemented with NotShowIn upstream. - Update to version 0.9.3.997: + More flexible build-time warnings with - -enable-more-warnings=[yes|no|error] + Removed unused PolicyKit configure check + Lazily initialize the notification service for faster startup + Fix various memory leaks + Warn user if CA certificate is left blank in the editor for 802.1x + Disabled creation of WPA-protected Ad-Hoc WiFi networks due to kernel bugs - Remove polkit-devel BuildRequires: removed upstream. - Update to version 0.9.3.995: + Updated translations. - Update to version 0.9.3.990: + Fix interaction of single-connection edit mode with PolicyKit + Add EAP-FAST support + Make editor connection list sortable + Ensure mobile broadband provider list is sensitized correctly - Drop NetworkManager-gnome-link-gkr.patch: fixed upstream. - Remove call to autoreconf: it was only needed for above patch. - Add NetworkManager-gnome-link-gkr.patch: Fix linking with gnome-keyring in a gconf-helpers test program. - Add call to autoreconf in %prep, as above patch touches the build system. - Update to version 0.9.2.0: + Updated translations. - Pass --disable-more-warnings to configure to allow building with gtk+ 3.3. - Really enable parallel build: fix typo smp_flags => smp_mflags. - Update to version 0.9.1.95: + Select user's home directory by default for VPN import + Show VPN details in the Connection Information dialog + Allow auto-unlocking of GSM modems + Fix crash of Bluetooth widget after pairing - Drop NetworkManager-gnome-bluetooth-crash.patch: fixed upstream. - Replace category SystemSetup by X-SuSE-ServiceConfiguration to suppress rpmlint warnings - Modified categories in .desktop file so that it is grouped with "System" applications in the desktop menus (bnc#714333) - Add NetworkManager-gnome-bluetooth-crash.patch: fix some crash in gnome-control-center when disabling bluetooth. - Update to version 0.9.1.90: + New private library for wireless and mobile dialogs + iso-codes package used for translated country names in the mobile broadband wizard - Add pkgconfig(iso-codes) BuildRequires and iso-codes Requires for the new use of iso-codes. - Create libnm-gtk0 and libnm-gtk-devel subpackages, for the new library. - Remove redundant tags/sections from specfile - Remove NetworkManager-glib BuildRequires: we don't need an explicit BuildRequires for libraries. - Remove libglade2-devel, libgudev-1_0-devel, libiw-devel BuildRequires: they are unneeded. - Change dbus-1-glib BuildRequires to dbus-1-glib-devel: we're interested in the devel subpackage. - Update to version 0.9.0: + Fix compatibility with GTK+ <= 2.22. + Change "Device MAC address" to combo box with an entry. + Default to IPv6 Auto for manually created connections. + Enable registration state home/roaming notifications for CDMA. + Fix various VPN secret saving issues. - Update to 0.8.9997: + don't allow inserting 0.0.0.0 as destination and netmask for IPv4 routes. + Fix crash when connection is invalid. + Complete openconnect migration support. + handle PKCS#8 private keys. + filter APN entry characters in mobile-wizard. + allow _ as APN character. + Updated translations. - Update to version 0.8.999: + Give modems more time to unlock themselves after PIN entry + Fix creation of 802.1x-enabled connections in the applet + Don't crash gnome-bluetooth on some failures when creating new DUN connections + Much better handling of IP addresses in the editor + Updated translations. - Drop NetworkManager-gnome-fix-wpa-e.patch: fixed upstream. - Add NetworkManager-gnome-fix-wpa-e.patch: fix WPA-Enterprise support (bgo#646210) (git) - Update to version 0.8.998 (0.9.0-rc1): + Bugs fixed: bgo#646043, bgo#646643. + Updated translations. - Rebase NetworkManager-gnome-OnlyShowIn.patch - Update to version 0.8.997 (0.9 beta3): + Mostly bugfixes. - Update to version 0.8.996 (0.9 beta2): + don't require glib 2.26 + deb#615082, lp#725041: fixes for new dnsmasq + crash fixes + ifupdown plugin fixes + save connection timestamps in /var not /etc + install time fixes for Arch Linux + libnm-glib crash and correctness fixes + fix display of SSIDs in applet tooltips + build fixes and cleanups + import existing user connections - Summary from 0.8.995 (0.9 beta1) + simpler, easier, more flexible, and cooler applets. + Fast User Switching. + WiMAX support. + System connections by default. + More flexible system administration. + Scales down to smaller devices. - Rebase NetworkManager-gnome-OnlyShowIn.patch - Change gtk2-devel BuildRequires to gtk3-devel. - Stop removing %{_sysconfdir}/dbus-1/system.d/nm-applet.conf ourselves: it's not installed anymore. - Added support for translation-update-upstream. - Call relevant macros in %post/%postun: + %desktop_database_post/postun because the package ships at least one desktop file. + %icon_theme_cache_post/postun because the package ships themed icons. - Pass %{?no_lang_C} to %find_lang so that english documentation can be packaged with the program, and not in the lang subpackage. - Change Requires of lang subpackage to Recommends, since the english documentation is not there anymore. - updated NetworkManager-gnome-OnlyShowIn.patch in order to start nm-applet under Xfce as well - Update to version 0.8.2: + Hide mobile broadband PIN code when it's entered + Ensure Enable Wireless and Enable Networking always correctly sensitized + Fix handling of slow mobile broadband devices when entering a PIN + Startup performance improvements + Easier keyboard navigation of the connection editor + Show VPN connection notification even if VPN provides none + Fix handling of VPN secrets when moving connections from system to user + Updated translations. - Drop upstream fixed patches: + NetworkManager-gnome-fix-new-glib.patch + Drop NetworkManager-gnome-remove-bad-category.patch - Split out -lang package. - Add NetworkManager-gnome-remove-bad-category.patch to remove a category that should not exist upstream anyway. Instead, add X-SuSE-ControlCenter-Hardware to nm-connection-editor.desktop later on with suse_update_desktop_file. - Do not add -fno-strict-aliasing to CFLAGS: it's not needed anymore. - Remove non-existing --with-notify configure option. - Re-enable parallel build. - Upodate to version 0.8.1: + Bluetooth Dial-Up Networking + Mobile Broadband Status: signal strength, roaming, and access technology display + Enhanced IPv6 support + Updated translations - Pass --disable-maintainer-mode to configure to allow building with latest gtk. - Require mobile-broadband-provider-info for DUN capabilities. The BT plugin crashes when selecting DUN without this package available. - Add a general frontend dbus configuration in NetworkManager so delete the conf in nm-applet, bili(a)novell.com(bnc#476502). - Requires timezone package - Rename 0002-Autostart-nm-applet-in-GNOME-session-only.patch to NetworkManager-gnome-OnlyShowIn.patch, and add LXDE to OnlyShowIn. - This is based on work by Andrea Florio <andrea(a)opensuse.org> - Update to version 0.8: + rh#494641 - Add --help to explain what nm-applet is/does + core: clearer failure message when an applet is already running + dun: refactor gnome bluetooth plugin to use bluetooth client + rh#556763 - wired: don't crash when getting 802.1x settings from the user + rh#557007 - info: don't crash on various D-Bus property errors + core: fix clearing secrets when updating connections + rh#541353 - link nm-connection-editor with libm for ceil() + gsm: fix secret request when connection has multiple secrets + Updated translations. - Change again gnome-keyring-devel BuildRequires to libgnome-keyring-devel, following the module split upstream. - Upgrade to the latest upstream 0.8 branch: + New popup menu UI. + Ability to manually disconnect active devices. + Rework PolicyKit support. + Now it's possible to disable (somewhat annoying) notifications + Require newer glib and remove cut+pasted code for things that are now in glib (GChecksum, ) + Certificate handling improvements. + Add lockdown support for "Create new wireless network..." + New wizard for GSM/CDMA connection setup + Translation updates. + Lots of bug fixes. - Change gnome-keyring-devel BuildRequires to libgnome-keyring-devel, following the module split upstream. - Replaced 0002-Autostart-nm-applet-in-GNOME-session-only.patch with 0002-Autostart-nm-applet-in-GNOME-LXDE-session-only.patch: Add LXDE to OnlyShowIn, as LXDE uses the gtk2 NetworkManager. - Fix the 802.1x wired authentication dialog to use the entered secrets (bnc #525401). - The ModemManager API signatures have been changed for some calls, adjust the calling code (bnc #533261). - Remove libgnomeui-devel BuildRequires, which isn't needed. - Update to 0.7.1. - Add -fno-strict-aliasing to CFLAGS to fix build with gcc 4.4. ==== aria2 ==== Version update (1.26.0 -> 1.26.1) Subpackages: aria2-lang libaria2-0 - Update to version 1.26.1: * Make assertion hold ==== biosdevname ==== - Detect dom0 via xenfs instead of cpuid to compensate for ABI change in xen-4.7 on AMD systems. (bnc#974257) biosdevname-dom0.patch ==== blog ==== - Install binaries with read permissions (bnc#990837) ==== btrfsprogs ==== Version update (4.7 -> 4.7.1) Subpackages: libbtrfs0 - Add new btrfsprogs-udev-rules package to contain the udev rules. - Fix packaging for udev rules: - btrfs builtin didn't exist prior to udev v190, so the rules must depend on that version. - Added patch: * btrfsprogs-only-install-udev-rules-for-udev-190.patch - update to 4.7.1 * check: * new optional mode: optimized for low memory usage (memory/io tradeoff) * --mode=lowmem, not default, still considered experimental * does not work with --repair yet * convert: regression fix, ext2_subvol/image rw permissions * mkfs/convert: * two-staged creation, partially created filesystem will not be recognized * improved error handling (fewer BUG_ONs) * convert: preparation for more filesystems to convert from * documentation updates: quota, qgroup * other * message updates * more tests * more build options, enhanced debugging - update to 4.7 * convert: fix creating discontig extents * check: speed up traversing heavily reflinked extents within a file * check: verify qgroups of higher levels * check: repair can now fix wrong qgroup numbers * balance: new option to run in the background * defrag: default extent target size changed to 32MiB * du: silently skip non-btrfs dirs/files * documentation updates: btrfs(5), btrfs(8), balance, subvolume, scrub, filesystem, convert * bugfixes: * unaligned access (reported for sparc64) in raid56 parity calculations * use /bin/bash * other stability fixes and cleanups * more tests - Removed patches: * 0002-btrfs-progs-btrfsck-verify-qgroups-above-level-0.patch * 0003-btrfs-progs-btrfsck-write-corrected-qgroup-info-to-d.patch - update to 4.6.1 * fi resize: negative resize argument accepted again * qgroup rescan: fix skipping when rescan is in progress * mkfs: initialize stripesize to correct value * testsuite updates, mostly convert tests * documentation updates * btrfs-device, btrfs-restore manual pages enhanced * misc fixups - update to 4.6 * convert - major rewrite: * fix a long-standing bug that led to mixing data blocks into metadata block groups * the workaround was to do full balance after conversion, which was recommended practice anyway * explicitly set the lowest supported version of e2fstools to 1.41 * provide and install udev rules file that addresses problems with device mapper devices, renames after removal * send: new option: quiet * dev usage: report slack space (device size minus filesystem area on the dev) * image: support DUP * build: short options to enable debugging builds * other: * code cleanups * build fixes * more tests and other enhancements * Removed patches: * 0001-btrfs-progs-free-qgroup-counts-in-btrfsck.patch * 0169-btrfs-progs-udev-add-rules-for-dm-devices.patch * btrfs-progs-no-PKG_CHECK_VAR - btrfsck updates for qgroup verification and repair (fate#318144) * We can now check all qgroup levels * btrfsck will write out corrected qgroups when run with --repair - Added patch: 0001-btrfs-progs-free-qgroup-counts-in-btrfsck.patch - Added patch: 0002-btrfs-progs-btrfsck-verify-qgroups-above-level-0.patch - Added patch: 0003-btrfs-progs-btrfsck-write-corrected-qgroup-info-to-d.patch - update to 4.5.3 * ioctl: fix unaligned access in buffer from TREE_SEARCH; might cause SIGBUS on architectures that do not support unaligned access and do not performa any fixups * improved validation checks of superblock and chunk-related structures * subvolume sync: fix handling of -s option * balance: adjust timing of safety delay countdown with --full-balance * rescue super-recover: fix reversed condition check * check: fix bytes_used accounting * documentation updates: mount options, scrub, send, receive, select-super, check, mkfs * testing: new fuzzed images, for superblock and chunks - fix build failure on 13.1: conditional default for udevdir - fix build failure on SLE11SP4: wrong check in makefile - Add udev rules for dm devices (bsc#912170 bsc#888215) - Added patch: 0169-btrfs-progs-udev-add-rules-for-dm-devices.patch - Added patch: btrfs-progs-no-PKG_CHECK_VAR - update to 4.5.2 * new/moved command: btrfs-calc-stats -> btrfs inspect tree-stats * check: fix false alert for metadata blocks crossing stripe boundary * check: catch when qgroup numbers mismatch * check: detect running quota rescan and report mismatches * balance start: add safety delay before doing a full balance * fi sync: is now silent * fi show: don't miss filesystems with partially matching uuids * dev ready: accept only one argument for device * dev stats: print "devid:N" for a missing device instead of "(null)" * other: * lowest supported version of e2fsprogs is 1.41 * minor cleanups, test updates - Removed patch: 2000-btrfs-full-balance-warning.diff - update to 4.5.1 * mkfs: allow DUP on multidev fs * fix static build - update to 4.5 * new/moved commands * btrfs-show-super -> btrfs inspect-internal dump-super * btrfs-debug-tree -> btrfs inspect-internal dump-tree * new commands * btrfs fi du - calculate disk usage, including shared extents * enhancements * device delete - delete by id (needs kernel support, not merged to 4.6) * check - new option to specify chunk root * debug-tree/dump-tree - option -t understands human readable name of the tree (along numerical ids) * btrfs-debugfs - can dump block group information * bugfixes * all commands should accept the option separator "--" * several fixes in device scan * restore works on filesystems with sectorsize > 4k * debug-tree/dump-tree - print compression type as string * subvol sync: fix crash, memory corruption * argument parsing fixes: subvol get-default, qgroup create/destroy/assign, inspect subvolid-resolve * check for block device or regular file in several commands * other * documentation updates * manual pages for the moved tools now point to btrfs-filesystem * testsuite updates - Removed patch (upstream): 0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch - Recommend btrfsmaintenance - hide min/max macros clashing with gcc 6 (bnc#966257) (0001-btrfs-progs-libbtrfs-remove-max-min-macros-from-API.patch) - update to 4.4.1 * find-root: don't skip the first chunk * free-space-tree compat bits fix * build: target symlinks * documentation updates * test updates - update to 4.4 * mkfs.btrfs --data dup * support balance filters added/enhanced in linux 4.4 * manual pages enhanced (btrfs, mkfs, mount, filesystem, balance) * 'btrfs filesystem usage' works with mixed blockgroups * build: installation to /usr/local * build: the 'ar' tool is properly deteced during cross-compilation * improved stability on fuzzed/crafted images when reading sys array in superblock * debug-tree: option -t understands ids for tree root and chnuk tree * check: properly reset nlink of multi-linked file * chunk recovery: fix floating point exception * chunk recovery: endianity bugfix during rebuild * mkfs with 64K pages and nodesize reported superblock checksum mismatch - Removed patches: * 0001-btrfs-progs-mkfs-use-correct-size-for-superblock-csu.patch * fix-doc-build-on-SLE11SP3.diff - Fix missing dependency on coreutils for initrd macros (boo#958562) - Call missing initrd macro at post / postun (boo#958562) - fix mkfs failure on ppc64 (or with sectorsize > 4k) (bsc#956819) - Added patch: 0001-btrfs-progs-mkfs-use-correct-size-for-superblock-csu.patch - update to 4.3.1 * fixes * device delete: recognize 'missing' again * mkfs: long names are not trimmed when doing ssd check * support partitioned loop devices * other * replace several mallocs with on-stack variables * more memory allocation failure handling * add tests for bugs fixed * cmd-device: switch to new message printing helpers * minor code cleanups - update to 4.3 * mkfs * mixed mode is not forced for filesystems smaller than 1GiB * mixed mode broken with mismatching sectorsize and nodesize, fixed * print version info earlier * print devices sorted by id * do not truncate target image with --rootsize * fi usage: * don't print global block reserve * print device id * minor output tuning * other cleanups * calc-size: * div-by-zero fix on an empty filesystem * fix crash * bugfixes: * more superblock sanity checks * consistently round size of all devices down to sectorsize * misc leak fixes * convert: don't try to rollback with a half-deleted ext2_saved subvolume * other: * check: add progress indicator * scrub: enahced error message * show-super: read superblock from a given offset * add README * docs: update manual page for mkfs.btrfs, btrfstune, balance, convert and inspect-internal * build: optional build with more warnings (W=...) * build: better support for static checkers * build: html output of documentation * pretty-print: last_snapshot for root_item * pretty-print: stripe dev uuid * error reporting wrappers, introduced and example use * refactor open_file_or_dir * other docs and help updates * testing: * test for nodes crossing stripes * test for broken 'subvolume sync' * basic tests for mkfs, raid option combinations * basic tests for fuzzed images (check) * command intrumentation (eg valgrind) * print commands if requested * add README for tests - build btrfsprogs-static package for 13.2 and Factory, package with static versions of the utilities, aimed for rescue environments - update to 4.2.3 - subvol sync: make it actually work again - scanning: do not scan already discovered filesystems (minor optimization) - convert: better error message in case the filesystem is not finalized - restore: off-by-one symlink path check fix - update to 4.2.2 - fi label: use fallback if the label ioctl is not available - convert: check nodesize constraints against commandline features (-O) - scrub: report status 'running' until all devices are finished - device scanning might crash in some scenarios - fi usage: print summary for non-root users - update to 4.2.1 - fix an off-by-one error in cross-stripe boundary check - convert: don't write uninitialized data to image - image: don't loop with option -t0 - image: don't create threads if compression is not requested - Removed patches: * 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch - make mkfs work with 64k nodesize again, notably fixes mkfs on ppc64 (bsc#945229) - Added patch: * 0001-btrfs-progs-fix-cross-stripe-boundary-check.patch - version 4.2 * enhancements: * mkfs: do not create extra single chunks on multiple devices * resize: try to guess the minimal size, 'inspect min-dev-size' * qgroup assign: add option to schedule rescan * chunk-recover: be more verbose about the scanning process * fixes: * check: * find stripes crossing stripe boundary -- created by convert * print correct range for file hole when there are no extents and learn how to fix it * replace: more sanity checks * convert: concurrency fixes related to reporting progress * find-root: option -a will not skip the current root anymore * subvol list: fix occasional crash * do not create stripes crossing stripe boundary * build: * fixes for musl libc * preliminary support for android (not working yet, more code changes needed) * new EXTRA_CFLAGS and EXTRA_LDFLAGS * other: * lots of cleanups * tests: lots of updates, new tests, framework improvements * documentation updates * debugging: print-tree shows stripe length - Removed patches (upstreamed): * 2104-get-min-size-for-resize.patch * 2105-move-min-resize-implementation-to-inspec.patch * 2106-inspect-add-command-min-dev-size.patch - add warning before full balance starts (bsc#940467, fate#319317) - Added patches: 2000-btrfs-full-balance-warning.diff - Add feature to get minimum size a filesystem can be resized to (FATE#317897). - Added patches: * 2104-get-min-size-for-resize.patch * 2105-move-min-resize-implementation-to-inspec.patch * 2106-inspect-add-command-min-dev-size.patch - version 4.1.2 - mkfs: bugfix, previous version does not create entierly correct filesystem (has to be recreated) - version 4.1.1 * bugfixes - defrag: threshold overflow fix - fsck: - check if items fit into the leaf space - fix wrong nbytes - mkfs: - create only desired block groups for single device - preparatory work for fix on multiple devices * enhancements - new alias for 'device delete': 'device remove' * other - fix compilation on old gcc (4.3) - documentation updates - debug-tree: print nbytes - test: image for corrupted nbytes - corupt-block: let it kill nbytes - spec: drop libacl dependency - version 4.1 * bugfixes - fsck.btrfs: no bash-isms - bugzilla 97171: invalid memory access (with tests) - receive: - cloning works with --chroot - capabilities not lost - mkfs: do not try to register bare file images - option --help accepted by the standalone utilities * enhancements - corrupt block: ability to remove csums - mkfs: - warn if metadata redundancy is lower than for data - options to make the output quiet (only errors) - mixed case names of raid profiles accepted - rework the output: - more comprehensive, 'key: value' format - subvol: - show: - print received uuid - update the output - new options to specify size units - sync: - grab all deleted ids and print them as they're removed, previous implementation only checked if there are any to be deleted - change in command semantics - scrub: print timestamps in days HMS format - receive: - can specify mount point, do not rely on /proc - can work inside subvolumes - send: - new option to send stream without data (NO_FILE_DATA) - convert: - specify incompat features on the new fs - qgroup: - show: distinguish no limits and 0 limit value - limit: ability to clear the limit - help for 'btrfs' is shorter, 1st level command overview - debug tree: print key names according to their C name * new - rescure zero-log - btrfsune: - rewrite uuid on a filesystem image - new option to turn on NO_HOLES incompat feature * deprecated - standalone btrfs-zero-log * other - testing framework updates - uuid rewrite test - btrfstune feature setting test - zero-log tests - more testing image formats - manual page updates - ioctl.h synced with current kernel uapi version - convert: preparatory works for more filesystems (reiserfs pending) - use static buffers for path handling where possible - add new helpers for send uilts that check memory allocations, switch all users, deprecate old helpers - Makefile: fix build dependency generation - map-logical: make it work again - Install bash completion for btrfs. - version 4.0 * resize: * don't accept file as an argument (it's confusing) * print better error message in case of an error * restore: optionally restore metadata (time, mode, uid/gid) * receive: optionally enforce chroot * new rescue subcommand 'zero-log', same as btrfs-zero-log, but now also part of the main utility * check: * free space checks match kernel, fixes incorrect reports * convert: fix setting of checksum bit if --no-datasum is used * fsck.btrfs: don't print messages * fix quota rescan on PPC64 (mangled ioctl number) * test updates * documentation: files renamed to .asciidoc, misc fixups - version 3.19.1 - convert: - new option to specify metadata block size - --no-progress actually works - restore: properly handle the page boundary corner case - build fixes: - missing macro from public header, BTRFS_BUILD_VERSION - wrong handling of --enable-convert - fi usage: reports correct space for degraded mounts - other: - mkfs: help string updates - completion: added 'usage' subcommands - cleanups in qgroup code, preparatory work - version 3.19 - btrfs-image - restore can now run in parallel threads - fixed restore of multiple image from multiple devices onto a single dev - introduced metadump v2 - check - make --init-csum-tree and --init-extent-tree work together - find-new - option to search through all metadata even if a root was already found - convert - show progress by default, can be turned off - corrupt-block - option to work on a specific root - bash completion script for all subcommands - spec: convert to autotools Removed patch 0169-btrfs-progs-Check-metadata-mirrors-in-find-root.patch - add COPYING - version 3.18.2 * qgroup show: print human readable sizes, options to say otherwise * check: new option to explicitly say no to writes * mkfs: message about trimming is not printed to stderr * fi show: fixed return value * tests: new infrastructure * btrfstune: force flag can be used together with seeding option * backtrace support is back * getopt cleanups * doc and help updates - version 3.18.1 - minor fixes - documentation updates - version 3.18 - mkfs - skinny-metadata feature is now on by default, first introduced in kernel 3.10 - filesystem usage - give an overview of fs usage in a way that's more comprehensible than existing 'fi df' - device usage - more detailed information about per-device allocations - check: - option to set a different tree root byte number - ability to link lost files to lost+found, caused by a recent kernel bug - repair of severely corrupted fs (use with care) - convert - option to show progress - subvol create - print the commit mode inline, print the global mode only if --verbose - other updates: musl-libc support, coverity bugfixes, new test images, documentation - Removed patches (upstreamed): * 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0028-btrfs-progs-rework-calculations-of-fi-usage.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - version 3.17.3 - convert: fix conversion of sparse ext* filesystems - show: resolve to the correct path - fsck: more verbose error for root dir problems - version 3.17.2 - check improvements - add ability to replace missing dir item/dir indexes - fix missing inode items - create missing root dirid - corrupt block: enhancements for testing fsck - zero-log: able to reset a fs with bogus log tree pointer (bko#72151) - package mkinitrd scripts conditionally (bsc#893577) - spec: minor updates - version 3.17.1 - fi df: argument handling - fix linking with libbtrfs - replace: better error reporting - fi show: fixed stall if run concurrently with balance - check: fixed argument parsing for --subvol-extents - fi df: SI prefixes corrected - Added patches: * fix-doc-build-on-SLE11SP3.diff - Removed patches: * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch - Modified patches: * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch - version 3.17 - check: --init-csum-tree acutally does something useful, rebuilds the whole csum tree - /dev scanning for btrfs devices is gone - /proc/partitions scanning is gone, blkid is used exclusively - new subcommand subvolume sync - filesystem df: new options to set unit format - convert: allow to copy label from the origin, or specify a new one - Modified patches: * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - Added patches: * 0010-btrfs-progs-move-group-type-and-profile-pretty-print.patch * 0028-btrfs-progs-rework-calculations-of-fi-usage.patch * 0042-btrfs-progs-fix-linking-with-libbtrfs.patch * 0043-btrfs-progs-libbtrfs-make-exported-headers-compatibl.patch - Removed patches: * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch * 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0023-btrfs-progs-print-B-for-bytes.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch * 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch - version 3.16.2 - fsck: handle bad extent mapping - image: make it work on a balanced fs - btrfs-show-super: print flags in human readable way - documentation updates - version 3.16.1 - library version defines - subvol list: -R to print received UUID - fixed detection of multiple mounts on the same directory - restore: misc fixes - other fixes - Modified patches (sync with pending upstream versions): * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch - Removed patch: library-version-defines.patch (upstream) - send-stream API users updatd, drop the workaround - Removed patch: send-stream-api-wokaround.patch - workaround for send api breakage - Added patch: send-stream-api-wokaround.patch - add api versioning and package version.h (now 0.1.1) - Added patches: * library-version-defines.patch - version 3.16 - show-super: skip unrecognized sb, add option to force - debug-tree: print tree by id - mkfs: new option to specify UUID - receive: new option to limit number of errors - check: new option to verify quotas - check: reduced memory requirements - check: new option to print extent sharing - restore: check length before decompression - restore: more error handling - balance: new filter 'limit' - recover: allow to read all sb copies - restore: option to loop during restoring - mkfs: drop experimental notice - btrfstune: new option to force dangerous changes - documentation updates - Deleted patches (upstream): * 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch * 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch * btrfs-progs-canonicalize-pathnames-for-device-commands - Refreshed patches: * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0164-btrfs-progs-convert-set-label-or-copy-from-origin.patch - refresh references on the following patches: * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch - btrfs-progs: ignore orphaned qgroups by default - Added patch: * 0204-btrfs-progs-ignore-orphaned-qgroups-by-default.patch - btrfs-progs: show extent state for a subvolume (bnc#865621) - Added patch: * 0203-btrfs-progs-show-extent-state-for-a-subvolume.patch - btrfs-progs: canonicalize pathnames for device commands (bnc#880486). - Added patch: * btrfs-progs-canonicalize-pathnames-for-device-commands - fsck: fix checking on filesystems with large sectorsize (bnc#872286) - Added patches: * 0171-btrfs-progs-make-free-space-checker-work-on-non-4k-s.patch - Do not package btrfs-find-root and btrfs-select-super by default. - Removed printing byte number for every slot (bnc#872364). - Removed patch: * 0170-btrfs-progs-In-find-root-dump-bytenr-for-every-slot.patch - update to upstream 3.14.2 - man: separate pages for all subcommands - minor bugfixes - spec: removed upstreamed patches, update build dependencies - Added patches: * 0001-btrfs-progs-doc-fix-symlink-target-for-btrfsck.8.patch - Removed patches: * 0001-Btrfs-progs-fix-check-to-test-trim-support.patch * 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch * 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch * 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch * 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch * 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch * 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch - add quota group verify patches, sent to list near end of the week starting 5/4/2014 - updates btrfsck with the ability to verify quota groups - Update the changelog with some sad version of diffstat output to meet requirements. - Added patches: * 0200-btrfs-progs-print-qgroup-excl-as-unsigned.patch * 0201-btrfs-progs-import-ulist.patch * 0202-btrfs-progs-add-quota-group-verify-code.patch - add quota group verify patches, sent to list near end of the week starting 5/4/2014 - updates btrfsck with the ability to verify quota groups - update to upstream 3.14.1 - mkfs: - fix TRIM detection - do not zero-out end of device unconditionally - no crash with --features option - fsck: - clear log tree in repair mode - check reloc roots - btrfs - reworked space reporting (bnc#873106) - btrfs fi usage - new command - btrfs dev usage - new command - btrfs fi df - enhanced output with GlobalReserve - Removed patches: * 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch - Added patches: * 0001-Btrfs-progs-fix-check-to-test-trim-support.patch * 0002-Btrfs-progs-fsck-fix-double-free-memory-crash.patch * 0003-Btrfs-progs-mkfs-Remove-zero_end-1-since-it-has-been.patch * 0004-btrfs-progs-fix-wrong-max-system-array-size-check-in.patch * 0005-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch * 0006-Btrfs-progs-fsck-clear-out-log-tree-in-repair-mode.patch * 0007-Btrfs-progs-fsck-avoid-pinning-same-block-several-ti.patch * 0008-Btrfs-progs-fsck-add-ability-to-check-reloc-roots.patch * 0009-btrfs-progs-prevent-close_root-if-the-root-to-close-.patch * 0010-btrfs-progs-fix-mkfs.btrfs-segfault-with-features-op.patch * 0011-btrfs-progs-Enhance-the-command-btrfs-filesystem-df.patch * 0012-btrfs-progs-Add-helpers-functions-to-handle-the-prin.patch * 0013-btrfs-progs-Add-command-btrfs-filesystem-disk-usage.patch * 0014-btrfs-progs-Add-btrfs-device-disk-usage-command.patch * 0015-btrfs-progs-cleanup-dead-return-after-usage-for-fi-d.patch * 0016-btrfs-progs-Fix-memleak-in-get_raid56_used.patch * 0017-Btrfs-progs-fi-usage-free-memory-if-realloc-fails.patch * 0018-btrfs-progs-read-global-reserve-size-from-space-info.patch * 0019-btrfs-progs-add-original-df-and-rename-disk_usage-to.patch * 0020-btrfs-progs-move-device-usage-to-cmds-device-more-cl.patch * 0021-btrfs-progs-check-if-we-can-t-get-info-from-ioctls-d.patch * 0022-btrfs-progs-zero-out-structures-before-calling-ioctl.patch * 0023-btrfs-progs-print-B-for-bytes.patch * 0024-btrfs-progs-Print-more-info-about-device-sizes.patch * 0025-btrfs-progs-compare-unallocated-space-against-the-co.patch * 0026-btrfs-progs-add-section-of-overall-filesystem-usage.patch * 0027-btrfs-progs-cleanup-filesystem-device-usage-code.patch * 0028-btrfs-progs-extend-pretty-printers-with-unit-mode.patch * 0029-btrfs-progs-replace-df_pretty_sizes-with-pretty_size.patch * 0030-btrfs-progs-clean-up-return-codes-and-paths.patch * 0031-btrfs-progs-move-global-reserve-to-overall-summary.patch - own mkinitrd directories - add missing symbol to library (bnc#873164) - add version dependency for devel package - Added patches: * 0001-btrfs-progs-move-arg_strtou64-to-a-separate-file-for.patch - fsck: fixes and enahancements to --init-extent-tree mode - fsck: chunk-recover updates - scrub: add force option -f - send: check if subvolumes are read-only - subvol snapshot: add options to affect commit behaviour - btrfs: add properties command group - restore: add dry-run option - restore: fix restoring of compressed files - mkfs: support for no-holes feature - mkfs: option -r deals with hardlinks and relative paths - mkfs: discard phase is interruptible - documentation updates - cleaned spec file - Removed patches: * 0162-btrfs-progs-fix-loop-device-mount-checks.patch * 0165-Revert-btrfs-progs-update-options-in-find-root.c.patch * 0166-Btrfs-progs-add-some-verbose-output-to-find-root.patch - bump version to 3.12 - update tarball and remove upstreamed patches - fsck, image, restore: various improvements and fixes - btrfs: quota rescan (fate#312751) - fsck updates - more mkfs sanity checks - qgroup rescan wait - Added patches: * 0050-Btrfs-progs-commit-the-csum_root-if-we-do-init-csum-.patch * 0051-btrfs-progs-Fix-getopt-on-arm-ppc-platforms.patch * 0052-btrfs-progs-fix-duplicate-__-su-typedefs-on-ppc64.patch * 0053-btrfs-progs-use-reentrant-localtime.patch * 0054-btrfs-progs-don-t-have-to-report-ENOMEDIUM-error-dur.patch * 0055-Btrfs-progs-added-btrfs-quota-rescan-w-switch-wait.patch * 0056-btrfs-progs-fix-qgroup-realloc-inheritance.patch * 0057-Btrfs-progs-fix-restore-command-leaving-corrupted-fi.patch * 0058-btrfs-progs-avoid-write-to-the-disk-before-sure-to-c.patch * 0059-btrfs-progs-error-if-device-for-mkfs-is-too-small.patch * 0060-btrfs-progs-error-if-device-have-no-space-to-make-pr.patch * 0061-btrfs-progs-calculate-available-blocks-on-device-pro.patch * 0062-Btrfs-progs-keep-track-of-transid-failures-and-fix-t.patch - Change udev rule filename in setup-btrfs.sh to /usr/lib/udev/rules.d/64-btrfs.rules from from /usr/lib/udev/rules.d/80-btrfs.rules (bnc#839960 comment#7) - Remove udev rules file - udev packages one itself (bnc#839960). - update to upstream master (194aa4a1) - btrfs-restore: deal with NULL returns from read_node_slot - btrfs-restore: use the correct leafsize when reading the FS location - btrfs-find-root: Add options to control generation and level - btrfsck: fix incorrect casting on items in the corrupt_blocks tree - Btrfs-progs: fix closing of devices - Btrfs-progs: enhance btrfs-image to restore image onto multiple disks - Btrfs-progs: cleanup btrfs-image usage - Btrfs-progs: delete fs_devices itself from fs_uuid list before freeing - Btrfs-progs: skip open devices which is missing - Btrfs-progs: fix misuse of skinny metadata in btrfs-image - Btrfs-progs: recover raid0/raid10/raid5/raid6 metadata chunk - Btrfs-progs: Add chunk rebuild function for RAID1/SINGLE/DUP - Btrfs-progs: introduce list_{first, next}_entry/list_splice_tail{_init} - Btrfs-progs: Add chunk recover function - using old chunk items - Btrfs-progs: Add block group check funtion - Btrfs-progs: extend the extent cache for the device extent - Btrfs-progs: use rb-tree instead of extent cache tree for fs/file roots - Btrfs-progs: introduce common insert/search/delete functions for rb-tree - Btrfs-progs: cleanup similar code in open_ctree_* and close_ctree - Btrfs-progs: Don't free the devices when close the ctree - Btrfs-progs: don't close the file descriptor 0 when closing a device - Btrfs-progs: fix missing recow roots when making btrfs filesystem - Add fix for passing super_nr while opening ctree - btrfs-progs-mkfs-default-extref.diff: turn on extended refs by default, (aka hardlink count limtitation) (bnc#835695) - added 0040-btrfs-progs-fix-loop-device-mount-checks.patch: fix loop mount detection again (bnc#834173) - Simplify checks in mkinitrd scripts. They are always true because they come from the same package Use relative paths to binaries - Move udev rules to /usr. - Adjust rules to call binary from /usr - Simplify fsck.btrfs, its just a dummy until fixed - update to upstream master (f00dd8386a57d241d0f7c) - Make requirement on libattr-devel explicit - initrd support: add module (bnc#750185, bnc#727383) - set correct file mode if writing replacement fsck - fix build failure - add btrfs-debug-tree to initrd - adjust fs size to correct size (bnc#744593) - man page documentation updates - do not package obsolete utilities - mkfs: store correct size of device in superblock (bnc#730103) - updated restriper/balance commands to match kernel version - place binaries in /usr tree (UsrMerge project) - adjust mkinitrd scrippt accordingly - add btrfsck repair options for: - rebuild extent records - fix block group accounting - reset csums for rescue nodatasum mount - prune corrupt extent allocation tree blocks - device scanning fixes for dm and multipath (bnc#749540) - initrd support: move btrfs device scan after block device setup - documentation updates - add csize for file commpressed size - updated restore utility - patch license to follow spdx.org standard - btrfs-progs-fix-open_ctree_usage_segfaults.patch: fix segfaults from bnc#710486 due to unchecked usage of return value of open_ctree() [fixed compilation warnings] - pull upstream, replace existing patches, spec update - update 'restore' utility - lzo support - tools may now take earlies superblock when opening the fs - other fixes - pull integration-20111030 branch - mkfs: force mkfs if desired - other fixes - add btrfs-dump-super to mkinitrd - other fixes - skip non-existent devices or without media - documentation updates - scrubbing single device - graceful error handling when opening fs fails - updated mkinitrd script to scan devices before mount (bnc#727383) - add several tools to mkinitrd if root fs is btrfs - pull upstream branch and delete local patches - btrfsck: ignore -a (bnc#655906) - btrfsck: fix strerror value - Remove redundant tags/sections from specfile - Use %_smp_mflags for parallel build - add patch for local version override as we do not build from git, and avoid doubled "Btrfs" in output of 'btrfs' - reorder help for 'get-default' right after 'set-default' - add option -p to print parent subvolume - add subvolume 'get-default' subsubcommand - remove debugging printf from 0001-Btrfs-progs-add-a-btrfs-select-super-command-to-over.patch - add support for currently available kernel features: - add scrub subcommand - scan /proc/partitions by default (or use --all-devices for all) - mkfs fixes and improvements - documentation fixes - fix failing on deleted loop mounts (bnc#697671) - update from git: - add btrfs-select-super utility - add btrfs-label utility - allow mixed data+metadata (option --mixed) - allow populating new filesystem with files (option --rootdir) - allow discard support in mkfs - lzo support - deprecate 'btrfsctl' 'btrfs-vol' 'btrfs-show' - other bugfixes and documentation improvements - change to a hardlink - add link for fsck.btrfs (bnc#665899) - update to v0.19-35-g1b444cd: * used space accounting fix for the converter * Add btrfs-list for listing subvolumes * Add new util: 'btrfs' * multidevice support for check_mounted * check slash in deleting subvolumes * Add btrfsck option to select the super block copy * btrfs-debug-tree: add -d option to print only the device mapping - fix crash on creating filesystems (bnc#603620) - revert last change (bnc#599224#c3) - add hardlink from fsck.btrfs (bnc#599224) - fix memory leak (bnc#537633) - Updated to latest repo version. - used space accounting fix for the converter - btrfsctl: add snapshot/subvolume destroy ioctl - btrfsck: check root back/forward references - Add btrfs-map-logical program to map and read logical block numbers - build btfs-convert (bnc#572912) - enable parallel build - added Supplements - move apps to /sbin - update to 0.19: - build with rpm optflags - install man pages - fix leak in extends checking (bnc#523447) ==== dracut ==== - Rename patch: * From 0211-fix_multipath_check_hostonly.patch to 0303-fix_multipath_check_hostonly.patch - Rename patch: * From 0213-10i18n-keymap-find.patch to 0213-Fix-wrong-keymap-inclusion.patch - 95fcoe: Do not complain about missing /etc/hba.conf (bsc#980539) * Add 0215-95fcoe-Do-not-complain-about-missing-etc-hba.conf.patch - 95fcoe: silence lldpad warnings * Add 0216-95fcoe-silence-lldpad-warnings.patch - 95fcoe: Allow to specify the FCoE mode via the fcoe= parameter * Add 0217-95fcoe-Allow-to-specify-the-FCoE-mode-via-the-fcoe-p.patch - 40network: allow persistent interface names (bsc#995284) * Add 0218-40network-allow-persistent-interface-names.patch - 95fcoe: use interface names instead of MAC addresses * Add 0219-95fcoe-use-interface-names-instead-of-MAC-addresses.patch - 95fcoe: always set AUTO_VLAN for fcoemon (bsc#995019) * Add 0220-95fcoe-always-set-AUTO_VLAN-for-fcoemon.patch - 95fcoe: Add shutdown script (bsc#994860) * Add 0221-95fcoe-Add-shutdown-script.patch - 90dm: Fixup shutdown script (bsc#994860) * Add 0222-90dm-Fixup-shutdown-script.patch - 90dm: fixup dependency cycle between MD and DM shutdown (bsc#994860) * Add 0223-90dm-fixup-dependency-cycle-between-MD-and-DM-shutdo.patch - 90multipath: Start daemon after udev settle (bsc#986734) * Add 0304-90multipath-Start-daemon-after-udev-settle.patch - 90multipath: load dm_multipath module during startup * Add 0305-90multipath-load-dm_multipath-module-during-startup.patch - 90multipath: add shutdown script (bsc#994860) * Add 0306-90multipath-add-shutdown-script.patch - Reformat patches and add patch header: * 0053-01fips-fixup-loading-issues.patch * 0126-01fips-Add-drbg-module-to-force-loaded-modules.patch * 0128-90lvm-Install-dm-snapshot-module.patch * 0133-Allow-multiple-configurations-per-network-interface-.patch * 0138-fips_add_aesni-intel.patch * 0168-remove_plymouth_logo_file.patch * 0169-network_set_mtu_macaddr_for_dhcp.patch * 0170-iscsi-skip-ibft-invalid-dhcp.patch * 0180-i18n_add_correct_fontmaps.patch * 0196-ibft-wait-for-session-on-all-paths.patch * 0201-fix_nfs_with_ip_instead_of_hostname.patch * 0300-dracut_dont_use_dpkg_defaults_on_SUSE.patch * fips-kernel-4.4-fixes.patch - Rename patch: * from fips-kernel-4.4-fixes.patch * to 0139-fips-kernel-4.4-fixes.patch - Do not overwrite existing FCoE configuration (bsc#993861) * Add 0214-95fcoe-Do-not-overwrite-FCoE-configuration.patch ==== gcr ==== Subpackages: gcr-data gcr-prompter gcr-viewer libgck-1-0 libgck-devel libgcr-3-1 libgcr-devel typelib-1_0-Gck-1 typelib-1_0-Gcr-3 typelib-1_0-GcrUi-3 - Add openSUSE conditional macro and description tag for existing patches in specfile. ==== gdk-pixbuf ==== Subpackages: gdk-pixbuf-devel gdk-pixbuf-query-loaders gdk-pixbuf-query-loaders-32bit libgdk_pixbuf-2_0-0 libgdk_pixbuf-2_0-0-32bit typelib-1_0-GdkPixbuf-2_0 - Add fixes for some crashes, taken from upstream git (bsc#988745 bsc#991450 CVE-2016-6352): gdk-pixbuf-bgo768688-bmp-overflow.patch gdk-pixbuf-bgo768484-ico-set-errors.patch gdk-pixbuf-bgo769738-bmp-overflow.patch gdk-pixbuf-bgo769170-ico-headers.patch ==== git ==== Version update (2.9.3 -> 2.10.0) Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk - git 2.10.0, feature and bugfix update: * various workflow output improvements * various improvements and extensions of command line options * A handful of "git svn" updates. * internal performance improvements - Reduce build-compare noise git-asciidoc.patch git-tclIndex.patch ==== gnome-control-center ==== Subpackages: gnome-control-center-color gnome-control-center-goa gnome-control-center-user-faces - Drop Mesa-demo-x Requires: No longer needed. Fixes boo#996633. ==== gnome-maps ==== Version update (3.20.3 -> 3.20.3.1) - Update to version 3.20.3.1 (boo#995112): + Fix bug where you could not type + or - in the searchbar. + Fix horizontal wrapping of the map. - Use sed to revert libchamplain version bump, upstream did not intend to bump. ==== gnome-menus ==== Subpackages: gnome-menus-devel libgnome-menu-3-0 typelib-1_0-GMenu-3_0 - Add 0001-desktop-entries-support-multiple-desktops-in-XDG_CUR.patch, 0001-desktop-entries-fix-trivial-bug-in-handling-of-multi.patch: Backport upstream commit b4546ab and 4befe76. Parse XDG_CURRENT_DESKTOP correctly when it specifies multiple desktops (bsc#988595, bgo#741505). ==== intltool ==== - Update to GNOME 3.20 Fate#318572 ==== kernel-source ==== Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - drm/i915: Fix S4 resume breakage (bsc#984629,bsc#984632,bsc#993472). - drm/i915: Add distinct stubs for PM hibernation phases (bsc#984632,bsc#993472). - x86 / hibernate: Use hlt_play_dead() when resuming from hibernation (bsc#984629,bsc#993472). - commit 1d73b85 - tcp: fix use after free in tcp_xmit_retransmit_queue() (CVE-2016-6828 bsc#994296). - commit 73d7d3e ==== kiwi ==== Version update (7.03.82 -> 7.03.92) Subpackages: kiwi-desc-isoboot kiwi-desc-netboot kiwi-desc-oemboot kiwi-desc-vmxboot kiwi-doc kiwi-media-requires kiwi-pxeboot kiwi-templates kiwi-tools - v7.03.92 released - Translated using Weblate (Vietnamese) Currently translated at 100.0% (28 of 28 strings) - Fixup elilo.conf append setup append parameter was filled with an undefined variable It should contain the information from $cmdline - v7.03.91 released - Fixed bootloader configuration custom kernel parameters should be added to GRUB_CMDLINE_LINUX and not GRUB_CMDLINE_LINUX_DEFAULT Fixes bnc#994910 - waitForStorageDevice patch This solves the issue bnc#992992. Now waitForStorageDevice method has set a timeout of 4 seconds instead of 60 if the device is a usb. GetDeviceTransportType method has been added in order to determine device type (usb, sata, etc.) - v7.03.90 released - Preserve timestamp on grub2-install copy In order to workaround the bug in shim-install which unnecessarily calls grub2-install we replace the binary by a noop before calling shim-install. However all file attributes of the grub2-install binary, timestamp, modes, etc should stay untouched (bnc#993825) - v7.03.89 released - Fixed setupNetworkWicked IP address information from wicked dhcp reply consists out of two parts but we are only interested in the plain IPv4 address information at this point. Fixes bnc#992989 - Make sure DHCPCHADDR is uppercase Fixes bnc#992988 - v7.03.88 released - Fixed device setup for initrd only disk images - v7.03.87 released - Fixed use of undefined firmware value - Fixed setupBootLoaderConfiguration Theme setup should be optional. The bootloader setup should allow for working without a graphics boot theme setup - Fixed use of uninitialized value in string eq - v7.03.86 released - netboot code for rhel only added on x86 atm - v7.03.85 released - Package rhel netboot descriptions - mini iso: Pass kexec=1 to linuxrc (boo#990374) - Duplicate openSUSE-13.2 to openSUSE-Tumbleweed - v7.03.84 released - insserv please just do what I want from you force remove of service - v7.03.83 released - Follow up fix for insserv is not a chkconfig When changing the call from chkconfig to insserv also the caller syntax changes. - Trivial: Fix spelling of openSUSE ==== konsole ==== Subpackages: konsole-part - Add fix-transparency.patch to fix transparent backgrounds (kde#366368) ==== libcap ==== Version update (2.22 -> 2.25) Subpackages: libcap2 libcap2-32bit - Update to versison 2.25: + Recover gperf detection in make rules. + Man page typo fix. + Tweak make rules to make packaging more straightforward. + Fix error explanation in setcap. + Drop need to link with libattr. It turns out libcap wasn't actually using any code from that library, so linking to it was superfluous. - Drop libcap-nolibattr.patch: fixed upstream. - No longer add %{buildroot} to all variables for make install the Makefile learned about the meaning of DESTDIR. - Update to version 2.24 * Fix compilation problems (note to self, make distclean && make, before release) * Some make rule changes to make uploading a release to kernel.org easier for me. * Tidied up some documented links. - Update libcap-nolibattr.patch - Add pkg-config build requirement; libcap now provides a pkgconfig file - Clean up specfile - Move libraries and binaries to /usr because of #UsrMove ==== libgnomesu ==== Subpackages: libgnomesu0 - Update to GNOME 3.20 Fate#318572 - Drop libgnomesu-exit-with-parent.patch: now included in tarball. ==== libical ==== Subpackages: libical-devel libical1 - Update to GNOME 3.20 Fate#318572 - Drop libical-sle12-abi.patch: use standard libical 1.0.1 ABI for SP2. ==== libpwquality ==== - Update to GNOME 3.20 Fate#318572 ==== libreoffice ==== Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-branding-upstream libreoffice-calc libreoffice-calc-extensions libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-theme-breeze libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-oxygen libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-kde4 libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-ru libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreoffice-writer-extensions libreofficekit - BuildRequire libopenCOLLADA-devel (the new package name) instead of openCOLLADA-devel, except for Leap which only has the latter ==== multipath-tools ==== Version update (0.6.2+suse20160805.dcfa37d -> 0.6.2+suse20160826.4abd547) Subpackages: kpartx - Fixup module name in /usr/lib/modules-load.d (bsc#986734) - multipath: fixup check from udev rules (bsc#986734) - multipathd: start daemon after udev trigger (bsc#986734) - Load device handler and multipath module at boot (bsc#991634) - Do not check daemon from udev rules (bsc#986734,bsc#990538) ==== nano ==== Version update (2.6.3 -> 2.7.0) Subpackages: nano-lang - GNU nano 2.7.0: * new feature: allowing text to be selected by holding Shift together with the cursor keys. * now works also when run in very tiny terminals (down to one line, one column) * improves the handling of the prompt in cramped spaces ==== nautilus ==== Version update (3.20.2 -> 3.20.3) Subpackages: gnome-shell-search-provider-nautilus libnautilus-extension1 - Update to version 3.20.3: + Support HDPI in desktop margins. + Fix opaque desktop background after changing themes. + Fix gnome-shell search not providing results or making the CPU at 100% even if closed. - Drop nautilus-desktop-canvas-view-scale-desktop-workarea.patch: fixed upstream. ==== ntp ==== Subpackages: ntp-doc - Make the resolver task change user and group IDs to the same values as the main task. (bnc#988028, ntp-usrgrp-resolver.patch) ==== obs-service-format_spec_file ==== Version update (20160202 -> 20160406) - Update to 20160406 * Update licenses * Fetch SPDX license exceptions (bsc#973404) ==== orc ==== Version update (0.4.25 -> 0.4.26) Subpackages: liborc-0_4-0 liborc-0_4-0-32bit - Update to version 0.4.26: + Use 64 bit arithmetic to increment the stride if needed. + Fix generation of ModR/M / SIB bytes for the EBP, R12, R13 registers on X86/X86-64. + Fix test_parse unit test if no executable backend is available. + Add orc-test path to the -uninstalled .pc file. + Fix compiler warnings in the tests on OS X. - Add pkgconfig(glib-2.0) BuildRequires, the build looks for it. - Remove obsolete bconds, they were only there for now obsolete versions of openSUSE. - Drop explicit xz BuildRequires: No longer needed. - Enable testsuite for all arches again. ==== pam ==== Subpackages: pam-32bit pam-devel - pam-limit-nproc.patch: increased process limit to help Chrome/Chromuim users with really lots of tabs. New limit gets closer to UserTasksMax parameter in logind.conf ==== perl-DBD-mysql ==== Version update (4.035 -> 4.036) - updated to 4.036 see /usr/share/doc/packages/perl-DBD-mysql/Changes 2016-08-23 Patrick Galbraith, Michiel Beijen, DBI/DBD community (4.036) Stable version, to include all changes since 4.035. 2016-08-19 Patrick Galbraith, Michiel Beijen, DBI/DBD community (4.035_03) * By mistake, when DBD::mysql was compiled against libmariadb, it did not compile in SSL support. Reported by Jitka Plesnikova @ Red Hat (https://rt.cpan.org/Public/Bug/Display.html?id=116959) (https://bugzilla.redhat.com/show_bug.cgi?id=1366773) * If the database test server was not on localhost and the test database was not yet created, we would not correctly create the test database. Reported by Vladimir Marek. (https://rt.cpan.org/Ticket/Display.html?id=112072) 2016-08-11 Patrick Galbraith, Michiel Beijen, DBI/DBD community (4.035_02) * Test 56connattr.t failed when run when performance schema is enabled, but tests were run as a user with limited permissions. Reported by J�r�me �t�v�. (https://rt.cpan.org/Public/Bug/Display.html?id=115980) * In 4.033_03 we added a patch from Petr P�sa? @ Red Hat for a problem on 64-bit big-endian systems. The patch was applied but the unit test was not, also, there was no entry in the change log. Unit test provided by Vladimir Marek. t/40server_prepare.t test failed on s390x platform. Server-prepared values of types int, smallint, and tinyint are passed to application as 32-bit integer. The same buffer was interpreted as long integer by DBD::MySQL. This caused misaligned read/write and bogus interpretation of the values. (https://rt.cpan.org/Public/Bug/Display.html?id=57266) * Remove dropdb, createdb, reload and shutdown admin functions from perldoc. These are deprecated by the C API. Use 'CREATE DATABASE..', 'DROP DATABASE...' and other SQL commands instead. * Test rt75353-innodb-lock-timeout.t fails on MySQL Server 5.1 and earlier because innodb_lock_wait_timeout is not modifyable per session. * Test rt25389-bin-case.t does not work on MySQL Server < 5.1, reported by GAAS. 2016-08-01 Patrick Galbraith, Michiel Beijen, DBI/DBD community (4.035_01) * Apparently, on t/31insertid.t, there is one test that fails when compiled against libmysqlclient 5.7 or up; issuing a SELECT statement on the same database handle that previously executed an INSERT clears $dbh->{mysql_insertid}, while previously this was retained. (https://rt.cpan.org/Ticket/Display.html?id=108000) * Removed appveyor.yml and mysql.mtest from CPAN releases. * Converted README.pod to README.md because of installation failures on FreeBSD, reported by Don Randolph. (https://rt.cpan.org/Public/Bug/Display.html?id=114177) ==== python-requests ==== Version update (2.10.0 -> 2.11.1) update to version v2.11.1 * Update urllib3 to 1.16 * Close and then release the connection * Added tests for should_bypass_proxies function * Update documentation of Session.max_redirects * Document bunch of return types * Update HISTORY.rst * Cleaning up comment on JSON encoding to be more strictly relevant. * Oh yeah, we updated urllib3 too. * Fixing test; it was accomplishing the right thing, but doing it in the wrong way. * compensate for lack of taste * Use xfail marker for a test expected to fail without Internet connection * in python3.x not have StringIO * Spelling fixes * adding in slice_length fix and test for chunk_size=None (#3370) * Support responses like `HTTP/1.1 404 Unicode chars` (#3385) * Document header ordering. (#3295) * Add section on SOCKS proxies. * Update list of supported Python versions in todo.rst * removing Content-Type and Transfer-Encoding headers on redirect * check and test for headers containing return characters or leading whitespace * Clarify Python versions supported by requests * Allow graceful interruption of testserver.Server * reverting 3362 * fixed date formatting * Make BaseAdapter describe the mandatory adapter interface (#3216) * Note how HTTPErrors are raised * Removing charset from JSON content type; tightening requirements on .encode() * Add 'all' proxy selection to select_proxy * Fix TypeError when get json-encoded content of a response * wildly inaccurate button results in deletion * v2.11.1 * v2.11.0 * Prepare changelog for 2.11.1. * Allow None value for chunk_size again (#3368) * updating documentation to reflect decision of #3386 * added in type check for chunk_size * Update a note on AppEngine * Remove duplicate import warnings * adding asserted_encoding check on None type encoding to match text() behavior (#3362) * Encoding JSON requests to bytes for urllib3 to handle; ensuring same with testing. * docs updates * Changelog for 2.11 * Update README.rst * Use iter instead of noop list comprehension * Test security warnings (#3289) * Combined tests to one tests for should_bypass_proxies method * Update index.rst * Replace tab with appropriate spaces. * Support ALL_PROXY environment variable * Add a bit about RequestsCookieJar to Cookies section * making module docstrings and coding comments consistent * docs: Add a note about SSL c_rehash * updating docstring to match functionality * fix grammer mistakes in Quickstart * consider plain ip notation of an ip in no_proxy if not in cidr notation * Defining header value type requirements and tests * removing redundant test * updating HISTORY * adding in pep8 fixes * building Response manually * making class and function docstrings consistent ==== spice-gtk ==== Subpackages: libspice-client-glib-2_0-8 libspice-client-gtk-2_0-4 libspice-client-gtk-3_0-4 libspice-controller0 python-SpiceClientGtk typelib-1_0-SpiceClientGlib-2_0 typelib-1_0-SpiceClientGtk-3_0 - Move acl helper to a new libspice-client-glib-helper package and add a corresponding dependency (bsc#994858) ==== systemd ==== Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-bash-completion systemd-logger systemd-sysvinit udev - Only BuildRequire gnu-efi when building the 'real' systemd package. ==== tiff ==== Subpackages: libtiff-devel libtiff5 libtiff5-32bit - Added patches: * tiff-4.0.6-CVE-2016-3623.patch * tiff-4.0.6-CVE-2016-3945.patch * tiff-4.0.6-CVE-2016-3990.patch * tiff-4.0.6-CVE-2016-3991.patch - Upstream commits to fix CVE-2016-3623 [bsc#974618], CVE-2016-3945 [bsc#974614], CVE-2016-3990 [bsc#975069], CVE-2016-3991 [bsc#975070] ==== virtualbox ==== Version update (5.1.4_k4.7.2_1 -> 5.1.4_k4.7.2_2) Subpackages: virtualbox-guest-kmp-default virtualbox-guest-tools virtualbox-guest-x11 - Re-added missing copy of Module.symvers from vboxguest build so that loads of vboxvideo can resolve all symbols, this got lost somehow (boo#983927, boo#993091) - Update the host <-> guest KMP conflict dependencies to no longer refer to the old name (boo#983927). ==== vsftpd ==== - Extend vsftpd-2.0.4-lib64.diff to also find libcap.so.* in /usr/lib64. ==== yast2-installation ==== Version update (3.1.213 -> 3.1.214) - Display a warning popup when the installer self-update uses the fallback URL instead of the selected SMT or the default SCC server (bsc#996179) - Do not contact the registration server in self-update when network is not running, skip self-update completely - 3.1.124 ==== yast2-packager ==== Version update (3.1.116 -> 3.1.117) - Fix URLs handling when retrying to load an add-on from a CD/DVD through the add_on_products.xml (related to bsc#991935). - 3.1.117 ==== yast2-security ==== Version update (3.2.2 -> 3.2.3) - mark string "Security" translatable (bnc#988764) - 3.2.3 ==== yast2-slp ==== Version update (3.1.9 -> 3.1.10) - Align left the labels in the SLP service popup, unify it with the other popup dialogs in YaST (bsc#996846) - 3.1.10 ==== zsh ==== - Remove custom zshrc and zshenv as they might interfere with the users config - Remove unused zshprompt.pl - Move install outside loop in spec file, was executed too often -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 14

[opensuse-factory] pyside pkconfig and egg-info
by Carlos Hernandez 08 Sep '16

08 Sep '16

I believe there are a couple of issues with the current packages of pyside found in factory. The issues are as follows: 1) Current packages in factory of pyside do not include egg-info as is suggested by the openSUSE python packaging guidelines found @ https://en.opensuse.org/openSUSE:Packaging_Python. 2) python3-pyside-devel is compiled with ENABLE_VERSION_SUFFIX=TRUE in order to have a non conflicting pkgconfig file. I believe it would be more appropriate to disable ENABLE_VERSION_SUFFIX and instead provide pkconfig file suffixed with the %{pyver} i.e. pyside-py3.pc The two above issues stop packages such as yubikey-piv-manager from ever launching since it depends on the egg-info files from pyside. I have address the issue in my home project which can be found here: https://build.opensuse.org/project/show/home:hurricanehernandez -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] btrfs saved my day but now am I stuck
by Constant Brouerius van Nidek 08 Sep '16

08 Sep '16

Some freak accident and a blackout which outlasted my UPS my system would not start. Found that I could get a well functioning system when I use the "Start bootloader from a read-only snapshot". But now I have a working system which is "Read-only file system" Looked into the Btrfs Wiki and did the man pages but did not find a solution for my problem. As a matter of fact I can not update because /var/lib/rpm/.rpm.lock is a read only. From this working Read only system there should be a way to get a fully working system. Somebody with a solution? -- Qt: 5.6.1 KDE Frameworks: 5.25.0 kf5-config: 1.0 KDE Plasma: 5.7.4 Kernel: 4.7.2-1-default opensuse:tumbleweed:20160830 Linux User 183145 working on a Pentium IV . -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] TW 20160901 - Chromium / NVidia issues
by René Krell 07 Sep '16

07 Sep '16

With the latest update 20160901 I have several rendering problems in Chromium, but NEITHER in Chrome NOR in Firefox, unfortunately being forced to use the native nvidia graphics driver, currently version 367.44. 1. When selecting text with the mouse, I cannot see the selected text any longer, but the selection gets filled with the background color. In comparison, Chrome shows the selected text with a white foreground color and a blue background, which gives a good contrast. 2. Popup menus (right mouse click) have a weird border (a simple black line without any additional space outside), which doesn't much fit the overall look and feel of Chromium. This might be normal although I cannot imagine nor remember this. The first one is of course the worst one. Does anyone have similar trouble and maybe a solution? René -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 5

[opensuse-factory] Gstreamer*0.10* for sale!
by Bjørn Lie 07 Sep '16

07 Sep '16

More than 3 years ago upstream said enough is enough and pulled the plug on gst-0_10 branch, and ever since then we the gnome-maintainers have been carrying around the abandoned packages, both because we care and at the time of upstreams kill-off point we had a lot of packages depending on them. Since then we have quietly been porting the ones we care about or dropping them from Tumbleweed. We have however now reached a point where we can not in good conscious say that we care for gst-0_10 at all anymore, and would as a result offer up maintainership of said packages for those that still depend on them / want them to stay in Tumbleweed. Currently osc whatdependson openSUSE:Factory gstreamer-0_10 standard x86_64 gives this list [see end of email] of depending packages. If you as a maintainer are affected, please consider stepping up and requesting maintainer via obs or email. The above said, maintenance burden is not very high currently, so don't fear taking responsibility, it mainly consists of tweaking packages to ensure their continued build. As a maintainer though I'd prefer that we could drop gst-0_10 from TW all the way, but acknowledge that this is not currently possible, but if everyone who have packages still depend on gst-0_10* do a real push to port or drop packages still dependent we could perhaps take the easy route out and just drop gstreamer-0_10. //Bjørn - on behalf of openSUSE GNOME maintainers. LIST: osc whatdependson openSUSE:Factory gstreamer-0_10 standard x86_64 gstreamer-0_10 : aegisub audacity boinc-client codelite e17 e_dbus echievements elementary elemines emotion-generic-players enlightenment eperiodique epymc erlang espeakedit etrophy evas-generic-loaders filezilla fityk flamerobin freqtweak gcompris gnuplot gnuradio gstreamer-0_10-plugin-crystalhd gstreamer-0_10-plugins-bad gstreamer-0_10-plugins-base gstreamer-0_10-plugins-gl gstreamer-0_10-plugins-good gstreamer-0_10-plugins-ugly hugin ignuit kde3-amarok kde3-kaffeine kdemultimedia3 kicad lekha libucil mathgl meson moodbar morituri perl-Alien-wxWidgets perl-Wx pgadmin3 plplot poedit presage psi+-plugins-psimediaplugin python-efl python-gstreamer-0_10 python-matplotlib python-wxWidgets python-wxWidgets-3_0 rage sffview shellementary terminology tintii urbanlightscape usbprog wammu wxGTK3-3_0 wxMaxima wxWidgets wxWidgets-3_0 wxWidgets-ansi wxWidgets-wxcontainer wxWidgets-wxcontainer24c wxhexeditor xchm xfce4-mixer xfce4-volumed xylib -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

8 11

[opensuse-factory] Upgrade 42.1 to 42.2
by Thomas Vatter 07 Sep '16

07 Sep '16

Hello, since the google doc is not accessible any more for me here the update of my entry. Upgrade 42.1 to 42.2 Works with the following issues: 1. Monitor cable has to be more tightly fixed than for normal use, else screen remains black. 2. When upgrading from DVD with "language de", rest default: at Progress 97% "Installation des Bootmanagers" this message is shown: Execution of command "" failed. Exit code 1. Error output: Installing for i386-pc platform. File descriptor 4 (dev/sda1) leaked on vgs invokation. Parent PID 26397: /usr/sbin/grub2-install /run/lvm/lvmetad.socket: connect failed: No such file or directory. WARNING: Failed to connect to lvmetad. Falling back to internal scanning. /usr/sbin/grub2-install: Dateisysten ext2 unterstützt keine Einbettungen. /usr/sbin/grub2-install: Fehler: Einbettung ist nicht möglich, jedoch für die Installation mit RAID und LVM erforderlich. Continueing and booting works. 3. Desktop background is reset to default. Thomas -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] TW: XFCE : LibreOffice Calc cannot Red Negative Numbers
by ellanios82 07 Sep '16

07 Sep '16

Hello List , Since about 2 months , TW: XFCE : LibreOffice Calc it is not possible to produce Negative Numbers in Red Color . [ same files show Red Negative Numbers OK using OpenOffice.] ........ regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Intention to drop e17 (Enlightenment will stay)
by Simon Lees 07 Sep '16

07 Sep '16

Hi All, I think the time has finally come to drop e17, It's not currently in leap and its mostly stayed in tumbleweed because while it still built it was less effort then removing it, now it no longer builds and the people who I know were using it have migrated to the latest enlightenment or something else I think its time to drop it. As a bit of history e17->e18 broke a bunch of much older themes and some modules (that didn't work well anyway) and introduced a compulsory compositor even though its quite fast all this annoyed some people so given I had to rename the new package anyway I just left the old one to keep people happier. If anyone is strongly apposed to this (and would like to fix the build issue) or has anything they need help migrating please don't hesitate to let me know. Cheers -- Simon Lees (Simotek) http://simotek.net Emergency Update Team keybase.io/simotek SUSE Linux Adeliade Australia, UTC+9:30 GPG Fingerprint: 5B87 DB9D 88DC F606 E489 CEC5 0922 C246 02F0 014B

1 0

[opensuse-factory] New Tumbleweed snapshot 20160901 released!
by Dominique Leuenberger 06 Sep '16

06 Sep '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: MozillaFirefox (48.0.1 -> 48.0.2) MozillaThunderbird (45.2 -> 45.3.0) binutils (2.26.1 -> 2.27) elfutils (0.166 -> 0.167) gcc6 (6.1.1+r239476 -> 6.2.1+r239849) grub2 libgcj-gcc6 (6.1.1+r239476 -> 6.2.1+r239849) lsof mailman (2.1.22 -> 2.1.23) python-setuptools (23.1.0 -> 26.1.1) systemd === Details === ==== MozillaFirefox ==== Version update (48.0.1 -> 48.0.2) Subpackages: MozillaFirefox-translations-common - Mozilla Firefox 48.0.2: * Mitigate a startup crash issue caused on Windows (bmo#1291738) ==== MozillaThunderbird ==== Version update (45.2 -> 45.3.0) Subpackages: MozillaThunderbird-translations-common - update to Thunderbird 45.3.0 (boo#991809) * Disposition-Notification-To could not be used in mail.compose.other.header * "edit as new message" on a received message pre-filled the sender as the composing identity. * Certain messages caused corruption of the drafts summary database. security fixes: * MFSA 2016-62/CVE-2016-2836 Miscellaneous memory safety hazards * MFSA 2016-63/CVE-2016-2830 (bmo#1255270) Favicon network connection can persist when page is closed * MFSA 2016-64/CVE-2016-2838 (bmo#1279814) Buffer overflow rendering SVG with bidirectional content * MFSA 2016-65/CVE-2016-2839 (bmo#1275339) Cairo rendering crash due to memory allocation issue with FFmpeg 0.10 * MFSA 2016-67/CVE-2016-5252 (bmo#1268854) Stack underflow during 2D graphics rendering * MFSA 2016-70/CVE-2016-5254 (bmo#1266963) Use-after-free when using alt key and toplevel menus * MFSA 2016-72/CVE-2016-5258 (bmo#1279146) Use-after-free in DTLS during WebRTC session shutdown * MFSA 2016-73/CVE-2016-5259 (bmo#1282992) Use-after-free in service workers with nested sync events * MFSA 2016-76/CVE-2016-5262 (bmo#1277475) Scripts on marquee tag can execute in sandboxed iframes * MFSA 2016-77/CVE-2016-2837 (bmo#1274637) Buffer overflow in ClearKey Content Decryption Module (CDM) during video playback * MFSA 2016-78/CVE-2016-5263 (bmo#1276897) Type confusion in display transformation * MFSA 2016-79/CVE-2016-5264 (bmo#1286183) Use-after-free when applying SVG effects * MFSA 2016-80/CVE-2016-5265 (bmo#1278013) Same-origin policy violation using local HTML file and saved shortcut file ==== binutils ==== Version update (2.26.1 -> 2.27) Subpackages: binutils-devel - Update to binutils 2.27. * Add a configure option, --enable-64-bit-archive, to force use of a 64-bit format when creating an archive symbol index. * Add --elf-stt-common= option to objcopy for ELF targets to control whether to convert common symbols to the STT_COMMON type. GAS: * Default to --enable-compressed-debug-sections=gas for Linux/x86 targets. * Add --no-pad-sections to stop the assembler from padding the end of output sections up to their alignment boundary. * Support for the ARMv8-M architecture has been added to the ARM port. Support for the ARMv8-M Security and DSP Extensions has also been added to the ARM port. * ARC backend accepts .extInstruction, .extCondCode, .extAuxRegister, and .extCoreRegister pseudo-ops that allow an user to define custom instructions, conditional codes, auxiliary and core registers. * Add a configure option --enable-elf-stt-common to decide whether ELF assembler should generate common symbols with the STT_COMMON type by default. Default to no. * New command line option --elf-stt-common= for ELF targets to control whether to generate common symbols with the STT_COMMON type. * Add ability to set section flags and types via numeric values for ELF based targets. * Add a configure option --enable-x86-relax-relocations to decide whether x86 assembler should generate relax relocations by default. Default to yes, except for x86 Solaris targets older than Solaris 12. * New command line option -mrelax-relocations= for x86 target to control whether to generate relax relocations. * New command line option -mfence-as-lock-add=yes for x86 target to encode lfence, mfence and sfence as "lock addl $0x0, (%[re]sp)". * Add assembly-time relaxation option for ARC cpus. * Add --with-cpu=TYPE configure option for ARC gas. This allows the default cpu type to be adjusted at configure time. GOLD: * Add a configure option --enable-relro to decide whether -z relro should be enabled by default. Default to yes. * Add support for s390, MIPS, AArch64, and TILE-Gx architectures. * Add support for STT_GNU_IFUNC symbols. * Add support for incremental linking (--incremental). GNU ld: * Add a configure option --enable-relro to decide whether -z relro should be enabled in ELF linker by default. Default to yes for all Linux targets except FRV, HPPA, IA64 and MIPS. * Support for -z noreloc-overflow in the x86-64 ELF linker to disable relocation overflow check. * Add -z common/-z nocommon options for ELF targets to control whether to convert common symbols to the STT_COMMON type during a relocatable link. * Support for -z nodynamic-undefined-weak in the x86 ELF linker, which avoids dynamic relocations against undefined weak symbols in executable. * The NOCROSSREFSTO command was added to the linker script language. * Add --no-apply-dynamic-relocs to the AArch64 linker to do not apply link-time values for dynamic relocations. - Add binutils-2.27-branch.diff with fixes on the branch sofar. - Remove gold-relocate-tls.patch, included in binutils 2.27. ==== elfutils ==== Version update (0.166 -> 0.167) Subpackages: libasm1 libdw1 libelf1 libelf1-32bit - Update to version 0.167: libasm: Add eBPF disassembler for EM_BPF files. backends: Add m68k and BPF backends. ld: Removed. dwelf: Add ELF/DWARF string table creation functions. dwelf_strtab_init, dwelf_strtab_add, dwelf_strtab_add_len, dwelf_strtab_finalize, dwelf_strent_off, dwelf_strent_str and dwelf_strtab_free. Support compressed sections from binutils 2.27. - Remove patch elfutils-0.166-elfcmp-comp-gcc6.patch: included upstream. ==== gcc6 ==== Version update (6.1.1+r239476 -> 6.2.1+r239849) Subpackages: cpp6 gcc6-c++ gcc6-fortran gcc6-info gcc6-locale gcc6-objc libasan3 libatomic1 libcilkrts5 libgcc_s1 libgcc_s1-32bit libgfortran3 libgomp1 libitm1 liblsan0 libmpx2 libmpxwrappers2 libobjc4 libquadmath0 libstdc++6 libstdc++6-32bit libstdc++6-devel-gcc6 libtsan0 libubsan0 - Update to gcc-6-branch head (r239849). * Includes GCC 6.2 release. * Includes fix for OVMF compilation. - Refresh gcc-dir-version.patch. - gcc6-devel: require gmp-devel and mpc-devel - Update HSA_RUNTINE_LIB in gcc6-hsa-enablement.patch ==== grub2 ==== Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-systemd-sleep-plugin grub2-x86_64-efi grub2-x86_64-xen - binutils 2.27 creates empty modules without a symtab. Add patch grub2-accept-empty-module.patch to not reject them. ==== libgcj-gcc6 ==== Version update (6.1.1+r239476 -> 6.2.1+r239849) Subpackages: gcc6-gij gcc6-java libgcj-devel-gcc6 libgcj-jar-gcc6 libgcj_bc1 - Update to gcc-6-branch head (r239849). * Includes GCC 6.2 release. * Includes fix for OVMF compilation. - Refresh gcc-dir-version.patch. - gcc6-devel: require gmp-devel and mpc-devel - Update HSA_RUNTINE_LIB in gcc6-hsa-enablement.patch ==== lsof ==== - modify lsof_4.89-nfs_hanging.patch and add a check for HasNFS variable as HasNFS may already have been set to 2 in the readmnt() function [bsc#995061] ==== mailman ==== Version update (2.1.22 -> 2.1.23) - update to 2.1.23 * CSRF protection in user options page (CVE-2016-6893) * header_filter_rules matching: headers and patterns are all decoded to unicode * another possible REMOVE_DKIM_HEADERS setting * SMTPDirect.py can now do SASL authentication and STARTTLS * bug fixes, i18n updates * for further details see NEWS ==== python-setuptools ==== Version update (23.1.0 -> 26.1.1) - fix certificate handling with certifi, add support for SUSE's CA bundle (setuptools-certpath.patch, fixes boo#993968) - remove shebang lines, strip executable bit from README, to silence the easy rpmlint warnings - update to 26.1.1: * Re-release of 26.1.0 with pytest pinned to allow for automated deployement and thus proper packaging environment variables, fixing issues with missing executable launchers. * #763: ``pkg_resources.get_default_cache`` now defers to the `appdirs project <https://pypi.org/project/appdirs>`_ to resolve the cache directory. Adds a vendored dependency on appdirs to pkg_resources. * #748: By default, sdists are now produced in gzipped tarfile format by default on all platforms, adding forward compatibility for the same behavior in Python 3.6 (See Python #27819). * #459 via #736: On Windows with script launchers, sys.argv[0] now reflects the name of the entry point, consistent with the behavior in distlib and pip wrappers. * #752 via #753: When indicating ``py_limited_api`` to Extension, it must be passed as a keyword argument. * Add Extension(py_limited_api=True). When set to a truthy value, that extension gets a filename apropriate for code using Py_LIMITED_API. When used correctly this allows a single compiled extension to work on all future versions of CPython 3. The py_limited_api argument only controls the filename. To be compatible with multiple versions of Python 3, the C extension will also need to set -DPy_LIMITED_API=... and be modified to use only the functions in the limited API. * #739 Fix unquoted libpaths by fixing compatibility between `numpy.distutils` and `distutils._msvccompiler` for numpy < 1.11.2 (Fix issue #728, error also fixed in Numpy). * #731: Bump certifi. * Style updates. See #740, #741, #743, #744, #742, #747. * #735: include license file. * #612 via #730: Add a LICENSE file which needs to be provided by the terms of the MIT license. * #725: revert `library_dir_option` patch (Error is related to `numpy.distutils` and make errors on non Numpy users). * #720 * #723: Improve patch for `library_dir_option`. * #717 * #713 * #707: Fix Python 2 compatibility for MSVC by catching errors properly. * #715: Fix unquoted libpaths by patching `library_dir_option`. * #714 and #704: Revert fix as it breaks other components downstream that can't handle unicode. See #709, #710, and #712. * #704: Fix errors when installing a zip sdist that contained files named with non-ascii characters on Windows would crash the install when it attempted to clean up the build. * #646: MSVC compatibility - catch errors properly in RegistryInfo.lookup. * #702: Prevent UnboundLocalError when initial working_set is empty. * #686: Fix issue in sys.path ordering by pkg_resources when rewrite technique is "raw". * #699: Fix typo in msvc support. * #609: Setuptools will now try to download a distribution from the next possible download location if the first download fails. This means you can now specify multiple links as ``dependency_links`` and all links will be tried until a working download link is encountered. * #688: Fix AttributeError in setup.py when invoked not from the current directory. * Cleanup of setup.py script. * Fixed documentation builders by allowing setup.py to be imported without having bootstrapped the metadata. * More style cleanup. See #677, #678, #679, #681, #685. * #674: Default ``sys.path`` manipulation by easy-install.pth is now "raw", meaning that when writing easy-install.pth during any install operation, the ``sys.path`` will not be rewritten and will no longer give preference to easy_installed packages. To retain the old behavior when using any easy_install operation (including ``setup.py install`` when setuptools is present), set the environment variable: SETUPTOOLS_SYS_PATH_TECHNIQUE=rewrite This project hopes that that few if any environments find it necessary to retain the old behavior, and intends to drop support for it altogether in a future release. Please report any relevant concerns in the ticket for this change. * #398: Fix shebang handling on Windows in script headers where spaces in ``sys.executable`` would produce an improperly-formatted shebang header, introduced in 12.0 with the fix for #188. * #663, #670: More style updates. * #516: Disable ``os.link`` to avoid hard linking in ``sdist.make_distribution``, avoiding errors on systems that support hard links but not on the file system in which the build is occurring. * #667: Update Metadata-Version to 1.2 when ``python_requires`` is supplied. * #631: Add support for ``python_requires`` keyword. * More style updates. See #660, #661, #641. * #659: ``setup.py`` now will fail fast and with a helpful error message when the necessary metadata is missing. * More style updates. See #656, #635, #640, [#644], #650, #652, and #655. * Updated style in much of the codebase to match community expectations. See #632, #633, #634, [#637], #639, #638, #642, #648. * If MSVC++14 is needed ``setuptools.msvc`` now redirect user to Visual C++ Build Tools web page. * #625 and #626: Fixes on ``setuptools.msvc`` mainly for Python 2 and Linux. * Pull Request #174: Add more aggressive support for standalone Microsoft Visual C++ compilers in msvc9compiler patch. Particularly : Windows SDK 6.1 and 7.0 (MSVC++ 9.0), Windows SDK 7.1 (MSVC++ 10.0), Visual C++ Build Tools 2015 (MSVC++14) * Renamed ``setuptools.msvc9_support`` to ``setuptools.msvc``. Re-release of v23.2.0, which was missing the intended commits. * #623: Remove used of deprecated 'U' flag when reading manifests. ==== systemd ==== Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-bash-completion systemd-logger systemd-sysvinit udev - Add a script to fix /var/lib/machines to make it suitable for rollbacks (bsc#992573992573) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] btrfs quotas enabled by default
by Chris Murphy 06 Sep '16

06 Sep '16

Hi, Could someone urgently check a default installation of the current Leap beta? btrfs qgroup show / It seems at least one user has found in Tumbleweed that Btrfs quotas are enabled by default, and experiencing bogus enospc as a result (actually they're the result of quotas so they aren't entirely bogus). I don't know how this happened, and I'm actually very curious how it happened. But the priority is to find out if Leap has them enabled by default and if so what's doing that so it can be reverted. It's bad to do this in Tumbleweed, but it's a blocker bug for Leap. It can't ship if quotas are enabled. -- Chris Murphy -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

11 27

[opensuse-factory] Desktop freeze on login/logout
by ianseeks 06 Sep '16

06 Sep '16

Hi This is an occasional issue, sometimes once a day, sometimes once every couple of days. Sometimes its the very first login after startup and sometimes its hours later during a login after quite a few successful login/logouts. When the progress bar bar on the login splash gets to about 85%, it will sometimes stop and needs a ctrl backspace backspace to recover. Sometimes i can't recover it as its locked/frozen the keyboard so no keys work, so its a full reboot. The same also happens on logout but its even more rare than the login. Just wondering if anyone else is experiencing this issue? Regards Ian -- Qt: 5.6.1 KDE Frameworks: 5.25.0 kf5-config: 1.0 KDE Plasma: 5.7.4 Kwin5: 5.7.4-152.1 Kernel: 4.7.2-1-default opensuse:tumbleweed:20160831 Nouveau: 1.0.12-1.3 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] btrfs qgroup concerns
by Richard Brown 06 Sep '16

06 Sep '16

On 3 September 2016 at 18:24, Chris Murphy <lists(a)colorremedies.com> wrote: > On Fri, Sep 2, 2016 at 8:27 PM, Jeff Mahoney <jeffm(a)suse.com> wrote: >> No, it's not. We publish the code for every single one of our kernels >> both in patch series and expanded tree form. Every maintenance update >> is tagged and even if they weren't, the last commit that was included in >> the RPM is included in the RPM metadata. We also have a very >> longstanding, public policy regarding code going upstream and a outsize >> percentage of our kernel teams in upstream maintainer roles. So you can >> imagine that when someone suggests that we're not being good community >> members with our kernels, it ruffles a few feathers. You're the one >> leveling an accusation (using typically incorrect assumptions). You >> bring the proof. > > 1. > On the Btrfs mailing list, most every time anyone has a quota problem, > they're informed if they need stable quota support to use XFS or ext4. > And not a single Btrfs developer ever contradicts that advice in the > slightest way. And this most recent non-contradicted advice happened > just a few weeks ago. Well now you've seen at least one of our btrfs developers contradicting that advice. And it's not like Jeff is some novice who doesn't know what he's been talking about, he's been intimately involved with the kernel and explicitly btrfs and other filesystems for years now. He knows what he's talking about, he's very rarely wrong, and he is one of those boring "don't change anything, ship it only when it's absolutely ready" Enterprise developers. And even IF he is wrong, it's going to be the job of him and his team to fix it in both SLE and openSUSE, so you can take extra reassurance from that. And he works for SUSE, and SUSE has invested a lot of time, effort, engineering and testing on this. You've heard of the testing Jeff's team has done. In addition I can tell you that SUSE QA have been doing additional testing on btrfs qgroups and shaken out a corner case bug or two, but nothing that would classify as a 'Ship Stopper'. SUSE's Beta customers have all been using the feature also as part of the SLE 12 SP2 Open Beta programme. You've heard of the strategic importance of this feature from Matthias, SUSE's Senior Director of SLE Product Management. As a default option in our installation, almost all of SUSE's customers will be relying on this to work when they install SLE 12 SP2 at the end. SUSE isn't going to do that unless it's confident in the quality of the feature and its ability to support it for years. As an openSUSE contributor, you have an opportunity to contribute to this and to bring additional knowledge and data points to the table, but that comes with a responsibility to ensure that your data is accurate, correct, reproducible and actionable. By quoting random commits and mailinglist threads you do not have a full understanding of, while actively rejecting any suggestion to do your own testing, you have failed to contribute responsibly to this discussion. > The very first time I have ever read anywhere, by any Btrfs developer, > that enabling quotas is considered stable, was on this list. You heard it here first :) > 2. > https://github.com/kdave/btrfs-progs/commit/637c005ac881a7def923e3f56c9f928… > > Upstream has performance and stability concerns in the current code. > That commit is two weeks old. I will quote from that commit "Signed-off-by: David Sterba <dsterba(a)suse.com>" David is another one of SUSEs btrfs developers, we ARE upstream. The advice in David's documentation is true. There is a performance hit and you should only turn it on if you' are using it. We are using it in snapper, therefore we turn it on and take that hit. That's not a performance concern, that's good documentation. And yes, there have been corner cases, and our developers have fixed them, and will fix them when they're reported. That doesn't mean it's 'unstable', that means there are corner cases. > Matthias, Richard, and some of your comments, while circumspect, can > be inferred to mean your quota code substantially differs from the > current stable kernel, and that's why you consider it stable. But then > just yesterday you say "the only [Btrfs] patches we have applied to > the 4.4-based SLE12-SP2/Leap kernel are backports and patches we've > submitted upstream". 4.4 is the latest upstream LTS Kernel 4.7 is the latest upstream kernel You have tested 4.7 in tumbleweed, and quoted from commits for 4.7 The current 4.4 Kernel contains many backports from 4.7. It also contains code which 4.7 has totally changed, so has specific fixes for 4.4 that are nothing to do with the current state in 4.7. These 4.4 backports+fixes number in the thousands. Many of them were written by SUSE engineers as part of their work for SLE 12 SP2/Leap 42.2 and then submitted upstream (it's our policy to submit all of our patches upstream). In the very unlikely event of upstream not accept a small amount of our patches, there is also the possibility that OUR 4.4 LTS Kernel might have some patches and configuration that differs from upstream vanilla 4.4 LTS. So, to put it bluntly, everything you tested in 4.7 is irrelevant unless you prove otherwise. everything you read about the current upstream development is not conclusive unless you prove otherwise. You were invited to help confirm the issues you feared were present in the 4.4 LTS Kernel used by Leap 42.2 or SLE 12 SP2. You were given advice from Jeff on how to do this. You have outright refused to do so, so frankly I feel you have no credibility to imply that there are deeper issues. To put it very directly, with all due respect, either contribute or shut up - this is a mailinglist for contributors to discuss the development of the openSUSE distributions, not a soap box for ill-informed rants. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] New package: bcm43xx-firmware
by Andreas Färber 06 Sep '16

06 Sep '16

Hello, I have submitted a new package bcm43xx-firmware for inclusion in Tumbleweed (and later Leap 42.2), containing two things: 1) Redistributable BCM43430 Wifi+Bluetooth firmware files 2) NVRAM config files for BCM43430 and BCM43362 The former will hopefully at some point go into kernel-firmware package via linux-firmware.git (open GitHub ticket for Raspberry Pi Foundation) and could then be dropped from this package. However, both pcie and sdio variants of brcmfmac driver use a single per-chipset .txt file for initialization that will not go into linux-firmware.git because it doesn't depend on just the chipset but on the "wiring" of the module or board. We therefore may have multiple configs for the same chipset, as demonstrated for bcm43362, and need to determine at installation time which file to use. For Kiwi images - where we cannot detect this during %post - the idea is to not provide a potentially wrong config file by default and instead add a symlink manually from a Kiwi hook script. https://build.opensuse.org/request/show/424758 Note: Please do not add additional firmware files to this package without obtaining confirmation that they are in fact redistributable! For non-redistributable firmware see pullin-bcm43xx-firmware package. A corresponding arm64 kernel config patch to enable brcmfmac on master branch is pending; on openSUSE-42.2 branch it is already enabled and on stable branch it's not needed. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Question about VirtualBox build failure in 42.2
by Larry Finger 06 Sep '16

06 Sep '16

The build of VirtualBox 5.1.4 for Leap 42.2 has failed because it is "unresolvable" due to "nothing provides kernel-default-devel = 4.7.2-2 needed by kernel-syms". Is this a transient failure, or is the kernel structure for 42.2 borked? This project builds locally with osc. Thanks, Larry -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] 42.2 Live DVD with KDE
by Linux Kamarada 05 Sep '16

05 Sep '16

Hi everyone. I started this discussion in another mailing list: https://lists.opensuse.org/opensuse/2016-08/msg00466.html Then, I was instructed to proceed here, at opensuse-factory. Since I believe Live media are important to Linux - especially because they present Linux to newcomers - I'm here to volunteer myself to build (or to help anyone that already started building) an official LiveDVD for openSUSE Leap 42.2. Before seeking for help, I was doing all the work on my own. You can check what I've done until now here: - Download of ISO image: https://sourceforge.net/projects/kamarada/files/latest/download - KIWI source: https://github.com/kamarada/kiwi-config-Kamarada/tree/42.2 - Commit history: https://github.com/kamarada/kiwi-config-Kamarada/commits/42.2 With that Leap 42.2 Live media, I tried to come as close as possible from a clean openSUSE Leap 42.2 install made using Network install. Except for Brazilian Portuguese translations and a few customizations to the software selection and YaST Firstboot, my Live media is equivalent to a clean openSUSE install. I'm facing some issues, which I reported at GitHub, and I would appreciate the help of any of you who have sufficient knowledge to solve them (maybe someone who knows very well openSUSE and/or KIWI could help solving those issues): https://github.com/kamarada/kiwi-config-Kamarada/issues/ Briefly, here is what I'm facing: 1) I'm unable to ping, when I try to do so I get the following error message: ping: error while loading shared libraries: libcap.so.2: cannot stat shared object: Permission denied 2) Live system loses keyboard configuration after initial setup, it looks like YaST Firstboot does not store the keyboard layout I select In the meantime, I managed to solve this issue: 3) LiveDVD asks for root password (the latest version based on Leap 42.2 Beta 1 does not ask for root password anymore) Any help would be really appreciated. Thank you in advance! Antonio The Linux Kamarada Project https://kamarada.github.io/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] RFC - pattern console still requires wodim
by Dave Plater 05 Sep '16

05 Sep '16

Leap:42.2 is about to go beta and the console pattern still requires wodim which causes cdrtools to be uninstalled. This has caused many problems with the recording of dvds by k3b in the past. This requirement remains due to kiwi having a specific requirement for genisoimage. This requirement is removed in kiwi versions 8x but apparently there are some python packages that can't be accepted. Regards Dave Plater -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 25

[opensuse-factory] What method is used to fix a Leap:42.2 package
by Dave Plater 05 Sep '16

05 Sep '16

I wish to help fixing the 32 build failures in Leap:42.2 but when I branched and fixed a package in the past it was rejected with the comment "Use source project openSUSE:Factory" in that case. The first package I picked is gnuradio sourced from 42.1 where it does build. I looked at updating it from Factory but that requires python-Sphinx and python-Pygments updates and I've stopped at a boost update which might lead to other failures. What method shall I use? Thanks Dave Plater -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Cannot find fstrim.timer in util-linux
by Roman Bysh 04 Sep '16

04 Sep '16

Hi, I just installed openSUSE 13.2 (yes I know) on a Crucial MX300 550 GB drive. I'm editing fstab by adding discard and noatime. I have read that continuous trim is not recommended but periodic trim. Hence, the need for fstrim.timer. I also read somewhere about adding an entry to udev rules for non-rotating devices but I cannot find it again. Read the article about setting up an SSD with openSUSE. I have three other drives. 2nd drive is for /data 3rd drive is for Tumbleweed and 42.2 Beta 1 4th has Yosemite However, I still need some help. -- Cheers! Roman IRC: 551368250 ============== -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] openSUSE Tumbleweed – Review of the Weeks 2016/35
by Dominique Leuenberger / DimStar 04 Sep '16

04 Sep '16

Dear Tumbleweed users and hackers, Week 35 has ended with a QtCon/Akademy/VideoLAN Dev Days in Berlin and, as was to be expected, a lot of good discussions happened there. But not everybody is in Berlin and some people make sure that Tumbleweed keeps on rolling. As such, we were provided 5 snapshots this week (0825, 0826, 0828, 0830 and 0831). The updates included * KDE Plasma 5.7.4 * KDE Framework 5.25.0 * KDE Applications 16.08.0 * ModemManager 1.6.0 * FFmpeg 3, parallel to FFmpeg 2.8.7 * VirtualBox 5.1.4 And as usual, a bunch of things are queued up for you: * GNOME 3.22 is appearing on the horizon * glibc 2.24 * gcc 6.2 Have a fun time ahead, Dominique

1 0

[opensuse-factory] btrfs incremental backup -- ERROR: cannot find parent subvolume
by Florian Koch 04 Sep '16

04 Sep '16

Hi list, i try to make incremental snapshots from my btrfs datastore: this is my structure: /mnt/datastore <-- btrfs root /mnt/datastore/.snapshot <-- for snapshots (no subvolume) /mnt/datastore_BACKUP <-- Backup btrfs fs first i create a read only snapshot (this works) btrfs subvolume snapshot -r /mnt/datastore /mnt/datastore/.snapshot/$(date +%y%m%d) then i make an initial full send receive (this works) btrfs send /mnt/datastore/.snapshot/160903 | btrfs receive /mnt/datastore_BACKUP/ now i have /mnt/datastore/.snapshot/160903 /mnt/datastore_BACKUP/160903 i create another read only snapshot (on another day) btrfs subvolume snapshot -r /mnt/datastore /mnt/datastore/.snapshot/$(date +%y%m%d) now i have /mnt/datastore/.snapshot/160903 /mnt/datastore/.snapshot/160904 /mnt/datastore_BACKUP/160903 If i try a incremental send receive i got an error btrfs send -p /mnt/datastore/.snapshot/160903 /mnt/datastore/.snapshot/160904 | btrfs receive /mnt/datastore_BACKUP/ At subvol .snapshot/160904 At snapshot 160904 ERROR: cannot find parent subvolume what is wrong with my attempt? cat /etc/os-release NAME="openSUSE Tumbleweed" # VERSION="20160831" ID=opensuse ID_LIKE="suse" VERSION_ID="20160831" PRETTY_NAME="openSUSE Tumbleweed" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:tumbleweed:20160831" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" regards flo -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory]
by Chris Murphy 03 Sep '16

03 Sep '16

On Fri, Sep 2, 2016 at 8:27 PM, Jeff Mahoney <jeffm(a)suse.com> wrote: > On 9/1/16 7:39 PM, Chris Murphy wrote: >> On Thu, Sep 1, 2016 at 5:25 PM, Simon Lees <sflees(a)suse.de> wrote: >>> >>> >>> On 09/02/2016 07:47 AM, Chris Murphy wrote: >>>> >>>> So please elucidate the list on exactly what code base you guys are >>>> using for quotas. If you're saying the warnings don't apply to your >>>> implementation then you guys are using something remarkably different >>>> and you need to tell us what that is or you do not get to sit there >>>> and claim this is a community project. >>>> >>> >>> Given that the right people are probably sleeping or close too now, i'll >>> remind you that you can look at openSUSE's kernel source code in the >>> following locations. >>> >>> https://build.opensuse.org/package/show/openSUSE:Leap:42.2/kernel-default >>> https://github.com/openSUSE/kernel >>> https://github.com/openSUSE/kernel-source >>> >>> (Make sure you get the right branches for the git based one). >> >> No, I'm not going to do that and it's inappropriate to even suggest >> it. The people who actually understand the code need to answer the >> question. They are the ones claiming their quota code is stable and >> production ready, the burden is on them to prove it, not for me to >> prove a negative. I'm not spending 1 f'n hour, let alone the likely 20 >> hours it would take me to look over hundreds to thousands of backports >> to find out what you guys have done, that compels you to claim your >> stuff is stable when upstream code is not there yet. > > No, it's not. We publish the code for every single one of our kernels > both in patch series and expanded tree form. Every maintenance update > is tagged and even if they weren't, the last commit that was included in > the RPM is included in the RPM metadata. We also have a very > longstanding, public policy regarding code going upstream and a outsize > percentage of our kernel teams in upstream maintainer roles. So you can > imagine that when someone suggests that we're not being good community > members with our kernels, it ruffles a few feathers. You're the one > leveling an accusation (using typically incorrect assumptions). You > bring the proof. 1. On the Btrfs mailing list, most every time anyone has a quota problem, they're informed if they need stable quota support to use XFS or ext4. And not a single Btrfs developer ever contradicts that advice in the slightest way. And this most recent non-contradicted advice happened just a few weeks ago. The very first time I have ever read anywhere, by any Btrfs developer, that enabling quotas is considered stable, was on this list. 2. https://github.com/kdave/btrfs-progs/commit/637c005ac881a7def923e3f56c9f928… Upstream has performance and stability concerns in the current code. That commit is two weeks old. 3. There have been two attempts at quotas on Btrfs, which caused users all sorts of problems and were ultimately abandoned in favor of the current code base. Therefore my concern about quotas is not unfounded, is not unreasonable, and I'm not alone in that concern. I have explicitly invited having my assumptions contradicted, most notably at the very top of this email, and that was not the first time. Matthias, Richard, and some of your comments, while circumspect, can be inferred to mean your quota code substantially differs from the current stable kernel, and that's why you consider it stable. But then just yesterday you say "the only [Btrfs] patches we have applied to the 4.4-based SLE12-SP2/Leap kernel are backports and patches we've submitted upstream". I see that as an incongrucency with 1, 2, and 3. I cannot rectify the inconsistency with the available information. There are patches you've applied, that are not applied upstream, that wipe away the performance and stability concern in a barely two week old commit? OK... -- Chris Murphy -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] HEADS UP synaptic touchpad users
by Florian Koch 03 Sep '16

03 Sep '16

Hi, all synaptics touchpad users should be aware of this bug: https://bugzilla.opensuse.org/show_bug.cgi?id=981924 regards flo -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] slow libreoffice
by Michal Hlavac 03 Sep '16

03 Sep '16

hi, using latest tumbleweed snapshot (nvidia driver 367.27) and libreoffice is very slow (e.g. switch between sheets in oocalc is about 2 - 3 seconds). And it looks like problem with UI drawing. And also I noticed that main menu is blinking when mouse moves over it. thanks, miso -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] amdgpu MULLINS (R5) experimental support and xf86-video-amdgpu
by Malcolm 03 Sep '16

03 Sep '16

Hi Following on from the enabling of experimental support for Sea Island cards (Ref: <https://lists.opensuse.org/opensuse-kernel/2016-08/msg00010.html> ) I have a MULLINS card, which if I build the amdgpu kernel module and add the missing line to support (Ref: <http://kernel.opensuse.org/cgit/kernel/commit/?h=stable&id=ac9a015a9094695e…> ) The kernel module loads up fine on Tumbleweed 4.7.0-2-default adding the amdgpu.exp_hw_support=1 in the kernel options, however the present xf86-video-amdgpu driver is missing the PCI ID's for the Mullins devices, so I patched and re-generated the relevant files (for my card) and rebuilt the driver, added a 20-amdgpu.conf file and all works fine now. So, is it possible to get this implemented for Tumbleweed, do I branch and submit for openSUSE only? Or do I need to go upstream, since there are more pci ids for other variants and get upstream to add? As a side note, I've also tested on SLED 12 SP2 RC1 4.4 kernel and it works there as well. -- Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890) openSUSE Leap 42.1|GNOME 3.16.2|4.1.27-27-default up 5 days 12:03, 5 users, load average: 0.26, 0.20, 0.23 CPU AMD Athlon(tm) II X4 635 @ 2.90GHz | GPU Nvidia GeForce 8800 GT -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

Re: [opensuse-factory] btrfs quotas enabled by default
by Chris Murphy 03 Sep '16

03 Sep '16

On Thu, Sep 1, 2016 at 3:21 PM, Matthias G. Eckermann <mge(a)suse.com> wrote: > Chris, > > I think, you are mixing two things, as also Richard > pointed out: > > 1. SLE 12 SP2 / LEAP 42.2 versus upstream/Tumbleweed. > > SLE 12 SP2 / LEAP 42.2 have a hardened (and less > feature rich) btrfs implementation. Stop being coy and tell me exactly what quota code base you guys are using in the 4.4 kernel you're shipping for Leap. Are you using upstream backports up to and including 4.7? Or 4.8? Or are you using something else and if so what is it? Because that matters. Right now the upstream code is not ready for production use, the upstream position has been it's ready for testing. If your policy is to subject your Leap users to testing substantially changing code (I've lost count how many quota patches have even come in the last month), you're obligated to tell them. Not silently opt them in. > > SUSE is actively participating in making subvolume > quotas more robust for use by snapper. And that's very generous but it doesn't make either the snapper defaults, or silently enabling quota support appropriate. And you don't even need quota support to do what you want with snapper. For a while now there's been a btrfs ioctl to do pretty much what "btrfs fi du" does to show what is unique and what is shared, per subvolume so you can figure out from that what space is being used or is available rather than enabling quotas. > > 2. Depending where you go the manpage from, it is either > from and for upstream (and thus true) or you found a > bug in the manpage for LEAP 42.2 / SLE 12 SP2. In > that case, please open a bug report. Well the only way you get away with that is if you're using an out of tree branch of code for quotas. *shrug* Because the two previous attempts are dead upstream code. And the current code, as I said, is too new and not ready for production and comes with the warnings I've copied from upstream. So just taking out the warnings doesn't make it stable, you know? So please elucidate the list on exactly what code base you guys are using for quotas. If you're saying the warnings don't apply to your implementation then you guys are using something remarkably different and you need to tell us what that is or you do not get to sit there and claim this is a community project. -- Chris Murphy -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] Bug in Tumbleweed snapshot 20160730
by Larry Finger 02 Sep '16

02 Sep '16

If you are running TW in a VirtualBox Virtual Machine, DO NOT install this snapshot!!!!! There is a bug that breaks xboxvideo for both KDE and Gnome. Not only does the new 4.7.0-1 kernel fail to boot to X, but something has broken X even when using older kernels. The specifics of the problem are unknown, but you have been warned. Larry -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

20 56

[opensuse-factory] New Tumbleweed snapshot 20160830 released!
by Dominique Leuenberger 02 Sep '16

02 Sep '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: NetworkManager accountsservice akonadi-calendar (16.04.3 -> 16.08.0) akonadi-contact (16.04.3 -> 16.08.0) akonadi-mime (16.04.3 -> 16.08.0) akonadi-notes (16.04.3 -> 16.08.0) akonadi-search (16.04.3 -> 16.08.0) akonadi-server (16.04.3 -> 16.08.0) analitza (16.04.3 -> 16.08.0) apparmor ark (16.04.3 -> 16.08.0) attica-qt5 (5.24.0 -> 5.25.0) autoyast2 (3.1.147 -> 3.1.149) baloo5 (5.24.0 -> 5.25.0) baloo5-widgets (16.04.3 -> 16.08.0) blinken (16.04.3 -> 16.08.0) bluedevil5 (5.7.3 -> 5.7.4) bluez-qt (5.24.0 -> 5.25.0) bovo (16.04.3 -> 16.08.0) breeze (5.7.3 -> 5.7.4) breeze-gtk (5.7.3 -> 5.7.4) breeze5-icons (5.24.0 -> 5.25.0) calendarsupport (16.04.3 -> 16.08.0) cantarell-fonts (0.0.24 -> 0.0.25) ceph (10.2.2+git.1471622341.b446b70 -> 11.0.0+git.1472455009.a17726c) cervisia (16.04.3 -> 16.08.0) cmake cogl (1.22.0 -> 1.22.2) dolphin (16.04.3 -> 16.08.0) dragonplayer (16.04.3 -> 16.08.0) eventviews (16.04.3 -> 16.08.0) extra-cmake-modules (5.24.0 -> 5.25.0) frameworkintegration (5.24.0 -> 5.25.0) gcr gitg (3.20.1 -> 3.20.2) gnome-packagekit gnome-settings-daemon gpg2 (2.1.13 -> 2.1.15) gpgmepp5 (16.04.3 -> 16.08.0) gpsd (3.15 -> 3.16) grantleetheme (16.04.3 -> 16.08.0) grilo-plugins gsettings-desktop-schemas gtk-vnc (0.5.4 -> 0.6.0) gwenview5 (16.04.3 -> 16.08.0) icewm incidenceeditor (16.04.3 -> 16.08.0) java-1_5_0-gcj-compat juk (16.04.3 -> 16.08.0) kaccounts-integration (16.04.3 -> 16.08.0) kaccounts-providers (16.04.3 -> 16.08.0) kactivities-stats (5.24.0 -> 5.25.0) kactivities5 (5.24.0 -> 5.25.0) kactivitymanagerd (5.7.3 -> 5.7.4) kalarmcal (16.04.3 -> 16.08.0) kalgebra (16.04.3 -> 16.08.0) kalzium (16.04.3 -> 16.08.0) kamera (16.04.3 -> 16.08.0) kanagram (16.04.3 -> 16.08.0) kapptemplate (16.04.3 -> 16.08.0) karchive (5.24.0 -> 5.25.0) kate (16.04.3 -> 16.08.0) katomic (16.04.3 -> 16.08.0) kauth (5.24.0 -> 5.25.0) kblackbox (16.04.3 -> 16.08.0) kblocks (16.04.3 -> 16.08.0) kbookmarks (5.24.0 -> 5.25.0) kbounce (16.04.3 -> 16.08.0) kbreakout (16.04.3 -> 16.08.0) kbruch (16.04.3 -> 16.08.0) kcachegrind (16.04.3 -> 16.08.0) kcalc (16.04.3 -> 16.08.0) kcalcore (16.04.3 -> 16.08.0) kcalutils (16.04.3 -> 16.08.0) kcharselect (16.04.3 -> 16.08.0) kcm_sddm (5.7.3 -> 5.7.4) kcmutils (5.24.0 -> 5.25.0) kcodecs (5.24.0 -> 5.25.0) kcolorchooser (16.04.3 -> 16.08.0) kcompletion (5.24.0 -> 5.25.0) kconfig (5.24.0 -> 5.25.0) kconfigwidgets (5.24.0 -> 5.25.0) kcontacts (16.04.3 -> 16.08.0) kcoreaddons (5.24.0 -> 5.25.0) kcrash (5.24.0 -> 5.25.0) kcron (16.04.3 -> 16.08.0) kdbusaddons (5.24.0 -> 5.25.0) kde-cli-tools5 (5.7.3 -> 5.7.4) kde-gtk-config5 (5.7.3 -> 5.7.4) kde-l10n (16.04.3 -> 16.08.0) kde-print-manager (16.04.3 -> 16.08.0) kde-user-manager (5.7.3 -> 5.7.4) kdebase4 (16.04.3 -> 16.08.0) kdebase4-runtime (16.04.3 -> 16.08.0) kdeclarative (5.24.0 -> 5.25.0) kded (5.24.0 -> 5.25.0) kdeedu-data (16.04.3 -> 16.08.0) kdelibs4 (4.14.22 -> 4.14.23) kdelibs4support (5.24.0 -> 5.25.0) kdenetwork4-filesharing (16.04.3 -> 16.08.0) kdepim (16.04.3 -> 16.08.0) kdepim-addons (16.04.3 -> 16.08.0) kdepim-apps-libs (16.04.3 -> 16.08.0) kdepim-runtime (16.04.3 -> 16.08.0) kdesdk4-scripts (16.04.3 -> 16.08.0) kdesignerplugin (5.24.0 -> 5.25.0) kdesu (5.24.0 -> 5.25.0) kdewebdev4 (16.04.3 -> 16.08.0) kdewebkit (5.24.0 -> 5.25.0) kdf (16.04.3 -> 16.08.0) kdgantt2 (16.04.3 -> 16.08.0) kdiamond (16.04.3 -> 16.08.0) kdnssd (16.04.3 -> 16.08.0) kdnssd-framework (5.24.0 -> 5.25.0) kdoctools (5.24.0 -> 5.25.0) kemoticons (5.24.0 -> 5.25.0) kf5-filesystem (20160420 -> 20160807) kfilemetadata5 (5.24.0 -> 5.25.0) kgamma5 (5.7.3 -> 5.7.4) kgeography (16.04.3 -> 16.08.0) kget (16.04.3 -> 16.08.0) kglobalaccel (5.24.0 -> 5.25.0) kgoldrunner (16.04.3 -> 16.08.0) kgpg (16.04.3 -> 16.08.0) kguiaddons (5.24.0 -> 5.25.0) khangman (16.04.3 -> 16.08.0) kholidays (16.04.3 -> 16.08.0) khotkeys5 (5.7.3 -> 5.7.4) khtml (5.24.0 -> 5.25.0) ki18n (5.24.0 -> 5.25.0) kiconthemes (5.24.0 -> 5.25.0) kidentitymanagement (16.04.3 -> 16.08.0) kidletime (5.24.0 -> 5.25.0) kig (16.04.3 -> 16.08.0) kimageformats (5.24.0 -> 5.25.0) kimap (16.04.3 -> 16.08.0) kinfocenter5 (5.7.3 -> 5.7.4) kinit (5.24.0 -> 5.25.0) kio (5.24.0 -> 5.25.0) kio-extras5 (16.04.3 -> 16.08.0) kio_audiocd (16.04.3 -> 16.08.0) kiriki (16.04.3 -> 16.08.0) kitemmodels (5.24.0 -> 5.25.0) kitemviews (5.24.0 -> 5.25.0) kiten (16.04.3 -> 16.08.0) kjobwidgets (5.24.0 -> 5.25.0) kjs (5.24.0 -> 5.25.0) kjsembed (5.24.0 -> 5.25.0) kjumpingcube (16.04.3 -> 16.08.0) kldap (16.04.3 -> 16.08.0) kleopatra5 (16.04.3 -> 16.08.0) klettres (16.04.3 -> 16.08.0) kmag (16.04.3 -> 16.08.0) kmahjongg (16.04.3 -> 16.08.0) kmailtransport (16.04.3 -> 16.08.0) kmbox (16.04.3 -> 16.08.0) kmediaplayer (5.24.0 -> 5.25.0) kmenuedit5 (5.7.3 -> 5.7.4) kmime (16.04.3 -> 16.08.0) kmines (16.04.3 -> 16.08.0) kmousetool (16.04.3 -> 16.08.0) kmouth (16.04.3 -> 16.08.0) kmplot (16.04.3 -> 16.08.0) knavalbattle (16.04.3 -> 16.08.0) knetwalk (16.04.3 -> 16.08.0) knewstuff (5.24.0 -> 5.25.0) knotifications (5.24.0 -> 5.25.0) knotifyconfig (5.24.0 -> 5.25.0) kolf (16.04.3 -> 16.08.0) kollision (16.04.3 -> 16.08.0) kolourpaint (16.04.3 -> 16.08.0) kompare (16.04.3 -> 16.08.0) konquest (16.04.3 -> 16.08.0) konsole (16.04.3 -> 16.08.0) kontactinterface (16.04.3 -> 16.08.0) kopete (16.04.3 -> 16.08.0) kpackage (5.24.0 -> 5.25.0) kparts (5.24.0 -> 5.25.0) kpat (16.04.3 -> 16.08.0) kpeople5 (5.24.0 -> 5.25.0) kpimtextedit (16.04.3 -> 16.08.0) kplotting (5.24.0 -> 5.25.0) kppp (16.04.3 -> 16.08.0) kpty (5.24.0 -> 5.25.0) kqtquickcharts (16.04.3 -> 16.08.0) krdc (16.04.3 -> 16.08.0) kremotecontrol (16.04.3 -> 16.08.0) kreversi (16.04.3 -> 16.08.0) krfb (16.04.3 -> 16.08.0) kross (5.24.0 -> 5.25.0) kruler (16.04.3 -> 16.08.0) krunner (5.24.0 -> 5.25.0) kscd (16.04.3 -> 16.08.0) kscreen5 (5.7.3 -> 5.7.4) kscreenlocker (5.7.3 -> 5.7.4) kservice (5.24.0 -> 5.25.0) kshisen (16.04.3 -> 16.08.0) ksirk (16.04.3 -> 16.08.0) kspaceduel (16.04.3 -> 16.08.0) ksquares (16.04.3 -> 16.08.0) ksshaskpass5 (5.7.3 -> 5.7.4) ksudoku (16.04.3 -> 16.08.0) ksysguard5 (5.7.3 -> 5.7.4) ksystemlog (16.04.3 -> 16.08.0) kteatime (16.04.3 -> 16.08.0) ktexteditor (5.24.0 -> 5.25.0) ktextwidgets (5.24.0 -> 5.25.0) ktimer (16.04.3 -> 16.08.0) ktnef (16.04.3 -> 16.08.0) ktouch (16.04.3 -> 16.08.0) ktp-accounts-kcm (16.04.3 -> 16.08.0) ktp-approver (16.04.3 -> 16.08.0) ktp-auth-handler (16.04.3 -> 16.08.0) ktp-common-internals (16.04.3 -> 16.08.0) ktp-contact-list (16.04.3 -> 16.08.0) ktp-contact-runner (16.04.3 -> 16.08.0) ktp-desktop-applets (16.04.3 -> 16.08.0) ktp-filetransfer-handler (16.04.3 -> 16.08.0) ktp-kded-module (16.04.3 -> 16.08.0) ktp-send-file (16.04.3 -> 16.08.0) ktp-text-ui (16.04.3 -> 16.08.0) ktuberling (16.04.3 -> 16.08.0) kturtle (16.04.3 -> 16.08.0) kubrick (16.04.3 -> 16.08.0) kunitconversion (5.24.0 -> 5.25.0) kwallet (5.24.0 -> 5.25.0) kwalletmanager5 (16.04.3 -> 16.08.0) kwayland (5.24.0 -> 5.25.0) kwidgetsaddons (5.24.0 -> 5.25.0) kwin5 (5.7.3 -> 5.7.4) kwindowsystem (5.24.0 -> 5.25.0) kwordquiz (16.04.3 -> 16.08.0) kxmlgui (5.24.0 -> 5.25.0) kxmlrpcclient5 (5.24.0 -> 5.25.0) libKF5ModemManagerQt (5.24.0 -> 5.25.0) libKF5NetworkManagerQt (5.24.0 -> 5.25.0) libcroco libgcrypt (1.6.6 -> 1.7.3) libgit2-glib (0.24.0 -> 0.24.3) libgravatar (16.04.3 -> 16.08.0) libgsf (1.14.39 -> 1.14.40) libgweather (3.20.2 -> 3.20.3) libkcddb4 (16.04.3 -> 16.08.0) libkcompactdisc4 (16.04.3 -> 16.08.0) libkdcraw (16.04.3 -> 16.08.0) libkdecoration2 (5.7.3 -> 5.7.4) libkdegames (16.04.3 -> 16.08.0) libkdepim (16.04.3 -> 16.08.0) libkeduvocdocument (16.04.3 -> 16.08.0) libkexiv2 (16.04.3 -> 16.08.0) libkface (16.04.3 -> 16.08.0) libkgeomap (16.04.3 -> 16.08.0) libkipi (16.04.3 -> 16.08.0) libkleo (16.04.3 -> 16.08.0) libkmahjongg (16.04.3 -> 16.08.0) libkomparediff2 (16.04.3 -> 16.08.0) libksane (16.04.3 -> 16.08.0) libkscreen2 (5.7.3 -> 5.7.4) libksieve (16.04.3 -> 16.08.0) libksysguard5 (5.7.3 -> 5.7.4) libqca2 libvirt (2.0.0 -> 2.1.0) libvirt-python (2.0.0 -> 2.1.0) lokalize (16.04.3 -> 16.08.0) lskat (16.04.3 -> 16.08.0) lsof mailcommon (16.04.3 -> 16.08.0) mailimporter (16.04.3 -> 16.08.0) marble (16.04.3 -> 16.08.0) messagelib (16.04.3 -> 16.08.0) milou5 (5.7.3 -> 5.7.4) mlocate mobipocket (16.04.3 -> 16.08.0) mozc nss_ldap obs-service-tar_scm (0.6.0.1469628830.67456b7 -> 0.6.1.1471594222.d257927) okteta (16.04.3 -> 16.08.0) okular (16.04.3 -> 16.08.0) oxygen5 (5.7.3 -> 5.7.4) oxygen5-icon-theme (5.24.0 -> 5.25.0) pangomm (2.40.0 -> 2.40.1) parley (16.04.3 -> 16.08.0) patterns-openSUSE pimcommon (16.04.3 -> 16.08.0) pixman plasma-framework (5.24.0 -> 5.25.0) plasma-nm5 (5.7.3 -> 5.7.4) plasma5-addons (5.7.3 -> 5.7.4) plasma5-desktop (5.7.3 -> 5.7.4) plasma5-integration (5.7.3 -> 5.7.4) plasma5-openSUSE plasma5-pa (5.7.3 -> 5.7.4) plasma5-pk-updates plasma5-session (5.7.2 -> 5.7.4) plasma5-workspace (5.7.3 -> 5.7.4) polkit-kde-agent-5 (5.7.3 -> 5.7.4) powerdevil5 (5.7.3 -> 5.7.4) poxml (16.04.3 -> 16.08.0) primus (20131226 -> 0+git20150328.d1afbf6) signon-kwallet-extension (16.04.3 -> 16.08.0) solid (5.24.0 -> 5.25.0) sonnet (5.24.0 -> 5.25.0) spectacle (16.04.3 -> 16.08.0) sssd (1.14.0 -> 1.14.1) step (16.04.3 -> 16.08.0) sweeper (16.04.3 -> 16.08.0) syndication (16.04.3 -> 16.08.0) systemsettings5 (5.7.3 -> 5.7.4) telepathy-glib threadweaver (5.24.0 -> 5.25.0) umbrello (16.04.3 -> 16.08.0) usb_modeswitch yast2 (3.1.203 -> 3.1.205) yast2-bootloader (3.1.199 -> 3.1.203) yast2-installation (3.1.210 -> 3.1.213) yast2-network (3.1.167 -> 3.1.168) yast2-packager (3.1.115 -> 3.1.116) yast2-storage (3.1.101 -> 3.1.102) yast2-update (3.1.41 -> 3.1.42) === Details === ==== NetworkManager ==== Subpackages: NetworkManager-devel libnm-glib-vpn1 libnm-glib4 libnm-util2 libnm0 typelib-1_0-NM-1_0 typelib-1_0-NMClient-1_0 typelib-1_0-NetworkManager-1_0 - Modify nm-probe-radius-server-cert.patch: Make sure the "Apply" button in Wifi configuration page of gnome-control-center is clickable.(bsc#985332) - Move provides NetworkManager(cacert-patch) to libnm-util2, to ensure gnome-control-center doesn't hard requires NetworkManager. - Update to version 1.0.12 (FATE#318572) - drop nm-core-fix-crash-during-Wi-Fi-rescan-by-emitting-NM_DE.patch contained in version 0.9.9.1. - Rebase NetworkManager-geoclue-interaction.patch - Rebase nm-don-t-consider-not-needed-secrets-for-has_system_secr.diff - Rebase nm-treat-not-saved-secrets-just-like-agent-owned-when-cl.diff - Rebase systemd-network-config.patch - Rebase nm-probe-radius-server-cert.patch - nm-treat-not-saved-secrets-just-like-agent-owned-when-cl.diff rebased. _ Update to version 1.0.12: + DHCP leases on software devices are now renewed when the computer is awoken from suspend. + Improved ifupdown plugin robustness and interoperability on Yocto and OpenEmbedded. + Fixed failed VPN activations when plugin supports interactive mode, but the VPN daemon does not. + Wi-Fi monitor interfaces are now ignored, not turned into managed mode. + AP and AdHoc mode connections with manual IP configuration are now able to autoconnect. + Broken device drivers (AWS ENI) that initially have invalid MAC addresses are now properly managed as soon as correct MAC address is set. + WWAN devices are unlocked a bit earlier so that supported IP versions can be queried. + The NetworkManager.service was ordered after network-pre.target and dbus.service. This ensures NetworkManager doesn't set up connectivity before firewall rules are in place and wouldn't exit before remote filesystems can be umounted ensuring orderly operation of systemd managed installations. + The netfilter rules used with shared IPv4 method are now removed on exit. + Ability to manage USB gadget drivers (UDC side) has beed added. + Infiniband transport mode change now takes place with the link set down because some drivers need that. + Race conditions that could disclose connection secrets to authenticated local users when changing ifcfg and keyfile connections have been fixed. This has security impact of low severity (CVE-2016-0764). + A handful of memory leak and crasher bugs of minor importance have been fixed. - Drop patches incorporated upstream: - NetworkManager-openvpn-route-configuration.patch. - nm-ppp-manager-clear-ppp_watch_id.patch. - nm-update-ip_iface-only-if-IP-interface-exists.patch. - Rebase systemd-network-config.patch for updated version. - nm-don-t-consider-not-needed-secrets-for-has_system_secr.diff rebased. - Split out a NetworkManager-branding-upstream subpackage that installs the default upstream version of the /etc/NetworkManager/NetworkManager.conf file. - Add Requires: NetworkManager-branding to main package. - Add nm-ppp-manager-clear-ppp_watch_id.patch and nm-update-ip_iface-only-if-IP-interface-exists.patch: Patches from upstream git cherrypicked to stable branch from master. - Add NetworkManager-openvpn-route-configuration.patch: Fix routes not being applied when connecting to openVPN. - Add explicit pkgconfig(libteam) BuildRequires: force team connection support. - Update to version 1.0.10: + Added support for handling VPN secrets to nmtui and nmcli agent. + Fixed a regression that caused NetworkManager to ignore external deletion of a device with master. + Fixed glitches with older versions of glib (prior to 2.36.0). + Fixed build with most recent versions of libsoup. + Fixed busy retry loop on non-transient errors from wpa_supplicant. + Improvements to testing infrastructure. + Updated translations. - Update to version 1.0.8: + MTU indicated by a VPN gateway is now properly applied. + Fixed MSS setting when MTU changes. + The default route is properly restored on device disconnect. + Build with older toolchains has been fixed. + The team devices can now properly be enslaved to bridges. + Failed DHCP attempts for assumed connections are now retried after a timeout. + Default wired connection is now created after udev registers the device. + Support for Bluetooth DUN devices with Bluez 5 has been fixed. + The ipv6.ignore-auto-dns property is now properly honored making it possible to override automatically obtained name servers. + Invalid permanent MAC adddresses as reported by some devices are now ignored. + Device links reported by more recent versions of Linux kernel that reside in different network namespaces are no longer confused with links in the namespace NetworkManager runs in. + MAC address changes of VLANs enslaved to a bond are now properly propagated to the master device. + Fixed error handling for teaming devices with invalid configuration. + Wi-Fi AP list is now updated correctly after AP mode has been used. + Management of a device is not attempted until the device has been registered with udev. + The error handling for VPN secret agents is now significantly more robust. + Detection of s390 CTC devices now works properly. + A GATEWAY property in /etc/sysconfig/network now no longer affects non-static connections. + Added support for IPv6-only VPN connections. + The systemd service now uses HUP signal to reload configuration. + Change VLAN default flags to set REORDER_HDR for new connections. + nmtui is now able to ignore automatically configured routes. + Numerous bash shell autocompletion fixes for nmcli. + Allow setting IPv6 and PPP settings for GSM and CDMA connections via nmcli. + Added support for adding ADSL connections in nmcli. + Numerous crash fixes. + Updated translations. - Rebase NetworkManager-geoclue-interaction.patch. - Update to version 1.0.6: + Improved capture portal detection. + Default route through WiFi connection is now preferred to Mobile Broadband if both are available. + Expose a flag to determine whether a particular connection is metered via API and client tools. + Add support for locking connections to a channel within a particular band. + Add support for configuring Wake-on-LAN capabilitites. + Allow overriding the MTU for team device. + Usual pile of bug fixes and robustness improvements. - Rebase NetworkManager-geoclue-interaction.patch . - Toggle with_cacert_patch to 1: the patch has been rebased. - Change nfs dispatcher-script to be more reliable in mixed ip v4 v6 environments. - Rebase nm-probe-radius-server-cert.patch for 1.0.4 (bsc#938198). - Add explicit pkgconfig(udev) BuildRequires: we need it to define %{_udevdir}. - Update to version 1.0.4: + The MTU setting from an IPv6 neighbor discovery Router Advertisements is now ignored if applying it would result in invalid configuration. + Some configuration options can now be changed without restarting the daemon. Notably, this applies to 'dns', 'connectivity' and 'ignore-carrier' settings. + The connection activation was made more robust. If an active connection is reactivated, the device it's active on takes precedence. If an attempt is made to activate a connection on a different device than it is active on, the activation proceeds removing the connection from the active device. + The device specifiers in configuration files now support negation via 'except:' match. + Devices that only have IPv6 link-local address are no longer assumed to be connected. + nmcli now provides hints and tab-completion for enumeration properties. + If the IPv6 interface tokens are set they are honored when creating an interface identifier for IPv6 addressing. + NetworkManager now maintains correct routing configuration when multiple interfaces are connected to the same network. + The management of devices can now be controlled with udev rules. The veth devices as well as the virtual Ethernet devices of various virtualization tools (VMWare, VirtualBox, Parallels Workstation) are now ignored by default. + The IPv6 privacy extensions are now enabled by default and handling of the ip6-privacy sysctl has been improved. + Activating a Bond, Bridge or Team device can now optionally activate the slave connections as well. The behavior is controlled with 'connection.autoconnect-slaves' property. + The platform support code has been refactored, resulting in better scalability in large configurations. + Changes to network interfaces configuration done outside NetworkManager are now picked up and exposed to the user via NetworkManager API and tools. + A connection can now optionally leave externally configured default route in place instead of overriding it. The behavior is controlled with 'ipv4.never-default' and 'ipv6.never-default' properties. + Multiple crasher and memory leak bugs in the daemon were fixed. + Multiple bugs that could cause the client tools to hang or crash were fixed. + nmcli allows multiple devices for 'nmcli device disconnect/delete'. + Firewall zone is added to firewalld for device-based VPN connections too. - Toggle with_cacert_patch to 0: the Radius CA patch neeeds to be reworked. Wrap applying the patch into a with_cacert_patch condition, to make enabling/disabling a one-stop change. - Update to version 1.0.2: + Wi-Fi devices now indicate support for 2GHz and 5GHz frequencies. + "nmcli device" output now indicates physical port ID + New config items added to the 'ifcfg-rh' plugin: - IPV4_ROUTE_METRIC and IPV6_ROUTE_METRIC. - DEVTIMEOUT. - IPADDR and PREFIX are now supported for specifying address ranges of shared IPv4 connections. + Dispatcher scripts now get a CONNECTION_FILENAME variable with the path to the configuration file for the connection. + An example dispatcher script that is able to apply complex routing rules (such as setting up policy-based routing) for 'ifcfg-rh' connections was added to examples/dispatcher/. + 'mode' key of Bond device options property now accepts numeric values. + Connection attempts for devices without carrier on startup now wait for carrier to appear within a short timeout instead of failing immediately. This makes system startup more robust. + Bridge connectivity is now properly restored on resume from suspend. + The D-Bus name is acquired earlier during the daemon startup. This makes it possible for the systemd service manager to optimize the service startup so that services that require networking are activated sooner contributing to faster system start up time. + A lot of memory leak problems were fixed, resulting in reduced memory usage. Many of them were discovered as a result of improvements in use of Valgrind in the testing infrastructure. + Management of 'teamd' daemon instances for Team devices is now more robust. + The 'dnsmasq' daemon respawns when it terminates and it is configured for management of DNS resolver configuration. + Hostnames that are not fully qualified are no longer sent to a DHCPv6 server for a dynamic DNS update. + Connection UUIDs are now checked for uniqueness when connection configurations are read. + Receipt of a NDP Router Advertisement can no longer lower the IPv6 hop limit (CVE-2015-2924). + Many other bugs were fixed. + Updated translations. - Add NetworkManager(cacert-patch) provides: to be toggled to 0 whenever we disable nm-probe-radius-server-cert.patch. Other packages that consume the ABI introduced by this patch can specify this as a requirement. - Reabse nm-probe-radius-server-cert.patch - Add rp-pppoe BuildRequires, so configure can autodetect the path to the pppoe binary. - Recommend rp-pppoe: the program is needed for NetworkManager to be able to initiate PPPoE connections (commonly used by ADSL providers). It is not strictly required to operate NM in most setups, thus only recommended (boo#903553). - Update to version 1.0: + A new 'libnm' GObject-based client library to replace libnm-util/libnm-glib: - IP address, IP route, hardware address, and other properties are now represented as strings. - Based on GIO's GDBus bindings instead of dbus-glib. - Uses modern GObject APIs including GAsyncResult and GVariant. - See https://wiki.gnome.org/Projects/NetworkManager/libnm. + Devices and VPN connections now have individual default routes. Priorities are handled through configurable route metrics. + nmcli now supports password requests and PolicyKit authorizations. + A faster, lighter-weight (though less capable) internal DHCP client has been added and may be selected with the "dhcp=internal" option. It supports fewer DHCP options and does not yet support DHCPv6. + A new 'configure-and-quit=yes' option has been added for environments with less dynamic network configuration. + When running on 3.17 and later kernels, NetworkManager handles IPv6LL address assignment to ensure that IPv6 connectivity is not enabled until intentionally configured by the user. + NetworkManager no longer causes the nl80211 kernel module to be loaded on systems with no Wi-Fi devices. + Bluetooth DUN support now works with Bluez 5.x. + VPN connections can now persist across link changes and suspend/resume if their VPN plugin supports this feature. + A new 'ibft' settings plugin has been added to support firmware-based iBFT/iSCSI configurations. This functionality has been moved to 'ibft' from the 'ifcfg-rh' plugin. + IPv6 router advertisement MTUs are now respected. + NetworkManager no longer requires polkit libraries at runtime when Polkit support is enabled, and Polkit can be disabled at build time too. + Automatically created connections are now deleted when their device goes away. + 'nmcli dev connect' now attemts to create a connection if none exists. + Manually configured static IPv6 configuration is kept even if SLAAC fails. + Manpages for the 'keyfile' and 'ifcfg-rh' plugins now describe their configuration syntax and available options. + WWAN connections now support IPv6 if the modem and provider support IPv6. + Software devices (bridge, bond, team, etc) can now be deleted from the D-Bus API or with nmcli. + The manpages, documentation, and API annotations have received many cleanups. + Externally created virtual interfaces are no longer managed by NetworkManager until they are set "up" or activated via nmcli. - Disable nm-probe-radius-server-cert.patch for now: needs rebase. - Drop 0001-core-don-t-auto-launch-logind-bgo-741572.patch and NetworkManager-dhcpv6.patch: fixed upstream. - Split out new subpackage typelib-1_0-NM-1_0 and libnm0. - Require typelib-1_0-NM-1_0 and libnm0 by the -devel package. - Add pkgconfig(bluez) BuildRequires. - Replace pkgconfig(libsystemd-login) BuildRequires with pkgconfig(libsystemd) and pkgconfig(polkit-gobject-1) with pkgconfig(polkit-agent-1), following upstream. - Update to version 0.9.10.1: + Kernel 'cache' routes (such as those added by IPv6 operations) are ignored, preventing unwanted CPU usage. + Vala bindings for libnm-glib async methods have been added. + Some interactions with external OpenVPN daemon default routes have been fixed. + Fixed usage of libnm-glib connectivity checking from garbage-collected languages. + An unusual delay acquiring a DHCP lease with dhcpcd has been fixed. + A libnm-glib crash has been fixed when multiple NMClients are created. + A failure to pass certificate blobs to wpa_supplicant has been fixed. + A failure to send the inner private key password to wpa_supplicant has been fixed. + nmcli now returns earlier when activating master interfaces. + nmtui password fields now correctly display the password. + The IPv6 hop limit is no longer mistakenly set to 0 in some cases. + Some DHCPv6 failures are no longer fatal. + Handling of DHCP 'nak' and 'expire' states has been fixed in some cases. + WiFi band locking has been fixed. + Support for Bluetooth DUN with Bluez5 has returned. + Non-local users can now control networking after authenticating with PolicyKit. + Externally added routes no longer have their metrics overwritten. + Some child interfaces (eg VPN or WWAN) are no longer deconfigured when recognized. + Support for the PrimaryConnection D-Bus property has been backported. + IPv6 RDNSS/DNSSL forced expiration is now handled properly. + An invalid route to the DHCP server is no longer added in some configurations. + A crash when external master/slave changes were made has been fixed. + Various nmtui bugs for slaves, WiFi, and IP address buttons have been fixed. + DHCP no longer fails due to SIGPIPE when the systemd journal is restarted. + Unmanaged slaves are now updated correctly when they disappear. + Cooperation with external team interfaces has been fixed. + Bridge STP property ranges are now properly checked. + Manager state is now properly updated on resume. + Slave interfaces are no longer released on exit. + Static IPv6 configuration is now added before SLAAC is started. + Allow shared connections to be started without a carrier. + A crash when disconnecting older Nokia phones has been fixed. - Drop patches incorporated upstream: + 0001-core-don-t-auto-launch-logind-bgo-741572.patch. + NetworkManager-dhcpv6.patch. - Add NetworkManager-dhcpv6.patch: dhcp: let dhclient handle requesting the 'server-id' option (boo#912315). - Add 0001-core-don-t-auto-launch-logind-bgo-741572.patch: do not trigger logind start on system startup to avoid deadlock (boo#905639). - Handle NetworkManager-dispatcher.service using the systemd macros. - Enable NetworkManager-dispatcher.service in %post: as this is a dbus service, the 'systemd unit' must be enabled in order to be fired up. - modified patches: * systemd-network-config.patch: NM-wait-online should block only network-online.target, not network.target (bnc#889175). - modified patches: * systemd-network-config.patch : ensure NetworkManager-wait-online.service is enabled when NetworkManager.service is (bnc#889175). - Add nm-core-fix-crash-during-Wi-Fi-rescan-by-emitting-NM_DE.patch: fix regression in 0.9.8.10 causing crash in Wifi rescan. - Change ppp requires to %requires_eq ppp: the plugin is installed in a versioned directory, and as such we do require the exact version of ppp (bnc#888442). - Rebase nm-probe-radius-server-cert.patch. - Drop nm-remove-AP-always-on-device-disconnect.diff: No longer needed. - Update to version 0.9.10.0: + Added a new curses-based client called "nmtui" for easier console operation. + Added interactive connection editing and creation mode to nmcli with detailed help and tab completion support. + nmcli bash completion has been greatly improved. + Added support for Data Center Bridging (DCB) and FibreChannel over Ethernet (FCoE). + IPv6 autoconfiguration is now done in userspace with libndp instead of the kernel. + The D-Bus daemon is no longer required for root-only operation. + WiFi, ADSL, WWAN, and Bluetooth are now optional plugins, reducing install size. + Added support for Infiniband Partitions. + Network connection files are no longer watched by default, use "nmcli con reload" to notice changes made externally or set "monitor-connection-files=true" in NetworkManager.conf's [main] section. + Connections can now be locked to interface names in addition to hardware/MAC addresses. + A new "ignore-carrier" configuration option is available to ignore the carrier on selected interfaces. + A new "dns=none" option has been added to suppress changes to /etc/resolv.conf. + Changes made to IP addresses, IP routes, and master/slave relationships from external tools are now recognized and reflected in the D-Bus API. + Assuming the existing configuration of interfaces without changing that configuration is now more reliable. + The 'root' user is no longer subject to PolicyKit access controls and usage of D-Bus "at_console" permissions has been removed. + Configuration file snippets can be dropped in /etc/NetworkManager/conf.d to change smaller sets of configuration options. + Added IP-level support for more software/virtual interfaces types including GRE, macvlan, macvtap, tun, tap, veth, and vxlan interfaces. + All network interfaces known to the kernel are now exposed through the D-Bus interface. + Improved support for routing-only VPNs like openswan/libreswan/strongswan. + Added support for "temporary" connections which are not saved to disk until requested. + Added WWAN autoconnect support and fixed issues with airplane mode handling. + NetworkManager-wait-online systemd service behavior is more reliable. + The dispatcher timeout has increased to 10 minutes, and new "pre-up" and "pre-down" events have been added which block activation until complete. + NetworkManager no longer prevents Wake-on-LAN functionality from working. + PPPoE now requires userland "rp-pppoe" to work around kernel bugs with that prevent detecting server-side termination of the PPP link. + An ARP announcement is now sent after IPv4 addresses are configured. + Added a DNS plugin for dnssec-trigger for better DNSSEC operation. + More properties are now exposed via the D-Bus properties interface in addition to getter/setter functions. + Added support for custom IP address ranges for Shared connections. + Fatal connection failures now block automatic reconnection more reliably. + VPN connection IP details are now available via the D-Bus interface. + VPN plugins can now request additional/new secrets from the user during the connection process. + 'veth' interfaces are now unmanaged by default to cooperate better with external tools. - Add pkgconfig(libndp) BuildRequires: new dependency. - Disable nm-probe-radius-server-cert.patch, nm-don-t-consider-not-needed-secrets-for-has_system_secr.diff and nm-treat-not-saved-secrets-just-like-agent-owned-when-cl.diff: closer investigation is needed if the upstream changes caught all the cases we tried to address with these hack patches. - Rebase NetworkManager-geoclue-interaction.patch. - Pass --with-nmtui to configure to ensure the text mode UI (tui) is being built. - Add pkgconfig(libnewt) BuildRequires: dependency for the tui. - Update to version 0.9.8.10: + Fixed a bug that allowed a user to disconnect a connection that they didn't have permissions on. - Update to version 0.9.8.9: + Fixed two problems that could result in gnome-shell showing incorrect icons. In particular, fixed the problem where the network icon would disappear when certain VPNs were activated. + Dispatcher scripts now receive correct IPv6 addresses, and also correct DHCP information on lease-change events. + NetworkManager no longer tries to start ModemManager itself on systemd-using systems. + Activating a second ethernet connection while another is already active will now not move the default route. + Fixed some edge cases where one user could deactivate a connection owned by another. + Fix handling of dhcp-send-hostname property with ifcfg-rh. + DHCP now works even if you have a global dhclient.conf that specifies a (non-NetworkManager) script to run. + The dhcpcd backend now requests that dhcpcd only do DHCPv4, fixing some WWAN devices that don't react well to seeing IPv6 packets. + Fixed the default value of bridge priority. + The D-Bus policy file has been updated to include the NetworkManager-iodine VPN plugin. + It is possible to specify the path to dnsmasq at build time. + Removed a GLib 2.32 dependency that accidentally snuck into 0.9.8.8. + Fixed a bunch of memory leaks. + Fixed a bunch of miscellaneous crashes. + Removed some less-useful bits of logging output. - Rebase NetworkManager-geoclue-interaction.patch. - Fix files list: do not expect pppd plugin version 2.4.5 in the directory name. - Add NetworkManager-geoclue-interaction.patch: allow the user "srvGeoClue" (as used by the geoclue2 service) to query NetworkManager, - Update to version 0.9.8.8 (bnc#845542): + Fixes to the BlueZ code. + A few memory leak fixes. + Minor docs fixes. - Switch to systemd check for the nfs script if enabled or not. Also do not exit with error code if nfs script is not enabled. - Update nm-probe-radius-server-cert.patch to probe the server with the user credential (bnc#817585) - Update to version 0.9.8.6: + Now supports BlueZ 5. If you are still using BlueZ 4, configure with --enable-bluez4 to disable BlueZ 5 support and enable BlueZ 4 support. - Pass nmrundir="/run/%{name}" to make and makeinstall: + Use /run/NetworkManager instead of /var/run/NetworkManager as runtime directory. - Update to version 0.9.8.4: + Removed some spurious warnings. + Root clients running outside a login session now have the right permissions. + WiFi AP mode and EAP-FAST support are now detected correctly. + Bonding config removes inappropriate options when switching modes. + Fix reading of bond connections with keyfile plugin. + Fix hang when dbus-daemon restarts. + Fix crash when VPN disconnection fails. + The dispatcher now exposes IPv6 VPN info, and IPv4/IPv6 DNS search domains. + Build fix to support dhcpcd 6.x. + Fix crash on startup when no dhcp client is available. + Fix device descriptions when using the latest udev. + Fix some possible obscure problems at startup. + Always clear the default route correctly when disconnecting mobile broadband. + Keyfile plugin now ignores more emacs temporary files. + When using dnsmasq, pass all nameservers to it, not just the first. + Kill dhclient if nm-dhcp-client-action encounters a fatal error. + Fix dispatcher systemd unit install. + Make ifcfg-rh VLAN parsing match initscripts better. + Change threshold for WiFi background scanning under WPA Enterprise. + Fix crash when deleting a currently-active connection. + Fix ifcfg-rh's handling of IPV6_DEFAULTGW. + Fix manager State transitions when connectivity checking is enabled. + Add Connectivity property to distinguish portals from "limited connectivity". + Add PrimaryConnection and ActivatingConnection properties to simplify UI code. + Old connection files containing UUIDs without hyphens work again. - Rebase systemd-network-config.patch. - avoid suse-release, it moves NM behind java in bootstrap and all features that configure.ac enabled for suse-release are enabled with --with anyway - Update to version 0.9.8.2: + Memory leak fixes. + Ensure the ifcfg-rh plugin saves the bridging STP setting correctly. + Also request static routes from DHCP servers. + Fix crash when dbus-daemon restarts. + Look harder for the machine ID and don't crash if we don't have one. + Copy DHCP leasefiles from the previous location if necessary. + Wait up to 120 seconds for modems to connect. + Don't crash for PPPoE connections with no wired setting. + Fix AvailableConnections for some WiFi connections. + Ensure new available connections generate the PropertiesChanged signal. + Ensure the keyfile plugin reads all-default VLAN connections correctly. + Suppress the kernel's automatic creation of bond0. + Make the SecretAgent API introspectable for bindings. + Ensure ActiveConnections get torn down when device is unavailable. + Ensure ifupdown plugin rechecks unmanaged devices on interface changes. + Don't prematurely think IPv6 has succeeded due to left-over addresses. + Fix various systemd issues and add service file for the dispatcher. + Updates for new ModemManager API changes. + Fix crash on Wi-Fi when IP configuration times out. - Rebase systemd-network-config.patch. - Readd nm-probe-radius-server-cert.patch, as it is not yet merged upstream (bnc#574266, bnc#771185). - Add sysconfig and suse-release BuildRequires to properly configure for suse (bnc#817592). - Add --with-netconfig=yes to configure call. - Add additional test in build section to ensure netconfig is detected. This is needed as specifying --with-netconfig=yes does not fail configure if not found. - Pass --with-modem-manager-1 to configure: we already have a new enough ModemManager to make use of this. - Add pkgconfig(mm-gib) BuildRequires: needed for above switch to take effect. - Re-enabled translation-update-upstream. - Recommend avahi-autoipd used for IPv4LL support. - Update to version 0.9.8.0: + Fix issue with duplicate ActiveConnection objects if a connection was reactivated on a device. + Fix race when looking up hostname and concurrently updating DNS. + Always load the 'keyfile' settings plugin, even if no plugins are specified. + Add a new WiFi device ADHOC capability; not all devices/drivers support IBSS mode. + Fix an issue with quick wpa_supplicant restarts not being noticed. + Expose the AvailableConnections property through libnm-glib. + Fix usage of libnm-glib's NMRemoteConnection from GObject introspection. - Update to version 0.9.7.997: + libnl 3.2.7 or later is required. + The internal crashdump handling has been removed. + A DHCPv6 DUID is now generated from /etc/machine-id and sent to the DHCPv6 server, if not overridden by an administrator-defined DUID. + Bond interfaces now wait for a ready slave before starting automatic IP configuration. + The kernel WiFi rfkill state is now synced to the user-requested WirelessEnabled state at startup. - Update to version 0.9.7.995: + New AvailableConnections property for Device objects. + Better handling of various rfkill/Airplane Mode switches + Fixed handling of DNS servers for some mobile broadband devices + Don't duplicate various IPv6 routes added by the kernel + Ensure buggy ethernet driver carrier indications are handled correctly + Fix crash in dnsmasq plugin when no nameservers were presen + Add support for 4G LTE network modes + Fix signal handling when daemonizing at startup + Don't autoconnect to WiFi networks that have never successfully connected + Only request new WiFi secrets during the initial association or when the secrets are known to be wrong, not every time the connection randomly fails + Add capability to autoconnect VPN connections when a parent connection succeeds + Add configure-time option for "permissive" system connection editing policy + Various libnm-glib fixes for asynchronous usage + Fix gateway handling when given with secondary IP addresses + Optionally listen to systemd for suspend/resume events instead of UPower + Fix 'seen-bssids' property when retrieving WiFi connections via D-Bus + Add support for AP-mode WiFi hotspots (instead of just Ad-Hoc) + Add a "slaves" property to Bond devices + Add support for ModemManager 0.7/0.8 + Allow more human-readable formatting of IP address in keyfile connections + Drop support for dhclient v3 + Add support for DHCPv6 server-side Dynamic DNS + Add support for bridge master devices and bridge ports + Fix canceling secrets requests in GUI agents + Always enable Proactive Key Caching (PKC, also called OKC) for WPA Enterprise WiFi configurations - Replace --with-distro=suse configure parameter with - -enable-ifcfg-suse, following upstreams changes, which allow for granular configuration. - Drop NetworkManager-systemd-suspend.patch and NetworkManager-upower-out.patch: fixed upstream. - Rebase systemd-network-config.patch. - Added migration hook enabling NetworkManager.service on update from openSUSE < 12.3 and NETWORKMANAGER=yes setting (bnc#803058). - Install network.service alias, that points to the enabled service and obsoletes the use of NETWORKMANAGER=yes/no sysconfig variable in /etc/sysconfig/network/config (bnc#764055,bnc#764336,bnc#798348). - Requires sysconfig-0.80.0 - Update systemd-network-config.patch: ensure NetworkManager.service is Before network.target (bnc#789421). - Move the udev files to the right location: + Define _udevdir based on the udevdir variable of udev.pc. + Pass --with-udev-dir=%{_udevdir} to configure. + Use %{_udevdir} in the files section as appropriate. - Switch on systemd support: change with_systemd defines to 1. - Add NetworkManager-systemd-suspend.patch and NetworkManager-upower-out.patch: Listen to systemd for suspend/resume when built with systemd support. The upower signals will never be emitted. - When building with systemd support, add gnome-common BuildRequires and call to gnome-autogen.sh, as above patches touch the build system. - Update to version 0.9.6.4: + Add libnm-glib API to get bond interface slaves. + Fix detection of some ACPI-based laptop airplane-mode/rfkill switches. + Fix a crash when a VLAN interface is removed. + Fix a regression setting the Device 'driver' and 'firmware' properties. + Fix a stale-properties issue with libnm-glib when device state changes. + Ignore cached/cloned route notifications from the kernel. + Work around buggy kernel driver carrier notifications. + Fix a crash with dnsmasq local caching nameserver functionality when no nameservers are present. + Add "Speedport W 501V" to list of manufacturer default SSIDs. + Various documentation fixes. + Fix routing setup if gateway is not given with the first IP address. + Enhance nmcli for additional VLAN and bonding functionality. + Fix possible crash when removing OLPC Mesh devices. - Disable nm-remove-AP-always-on-device-disconnect.diff: the AP might be removed from the list forever due to the AP list update method change since 0.9.4.0 (bnc#768564) - Update to version 0.9.6.0: + Allow customized dnsmasq local caching nameserver config via /etc/NetworkManager/dnsmasq.d/ + Fixes for VLAN and bonding when libnl2 or earlier are used + D-Bus API, libnm-glib, libnm-util, and GObject Introspection documentation updates. - Update to version 0.9.5.96: + Fix various crashes and issues in the ifcfg-rh system settings plugin + Fix race with multiple interfaces running DHCP at the same time + Add Linux From Scratch (LFS) support. - Update to version 0.9.5.95: + Many libnm-glib fixes, including crashes when NetworkManager restarts + Enhanced IPv6 stability and compatibility. + Fix regression in carrier handling for devices that don't support carrier detect. + Add ability to connect to new WiFi networks from nmcli. + Add native support for ADSL modems using PPPoE or PPPoATM. + Reduce number of changes made to DNS information during connection setup. + Add support for IPv6-enabled VPN connections. + Add device driver version, firmware version, and autoconnect properties to D-Bus API. + Add on-demand WiFi scan support. + Fix IPv6 default gateway handling for DHCPv6. + Add Vala language bindings. - Drop patches that were merged upstream: + nm-ensure-bindings-created-NMClient-object-work.patch + nm-gerror-must-be-null.patch + nm-ppp-build-error.patch + nm-ensure_inited-fixing.patch + nm-null-out-on-dispose.patch + nm-probe-radius-server-cert.patch + nm-wireless-strength.patch - Add vala BuildRequires: needed to build the new vala bindings. - Add nm-wireless-strength.patch, fix wireless status for ipw2200. (bnc#755541, bgo#675017). - Remove dbus system-service for NetworkManager, to prevent warnings about it not being running (bnc#738596) - Add nm-probe-radius-server-cert.patch to probe the certificate of the RADIUS server (bnc#574266, bnc#771185) - Add nm-null-out-on-dispose.patch to fix crash in gnome-shell or any other program using libnm-glib (bgo#674473) - Add nm-ensure-bindings-created-NMClient-object-work.patch to fix "nmcli con" not working (bgo#672812, bnc#766045). - Add nm-ppp-build-error.patch, don't use struct ifpppstatsreq that was removed from linux/ip_ppp.h in recent kernels. - Add nm-ensure_inited-fixing.patch, ensure initialization in get_property() calls.(bnc#764290). - Add nm-gerror-must-be-null.patch: GError * must be initialized to NULL (bnc#757656). - Update to version 0.9.4.0: + Removed support for WiFi Ad-Hoc WPA connections due to kernel bugs - Update to version 0.9.3.997: + A bug causing IPv6 address assignment to fail on newer kernels with libnl3 has been fixed + Fix a bug in the ifcfg-rh plugin with backticks in WPA passphrases + Ensure connections that cannot be stored are ignored by the ifnet plugin + Enable out-of-the-box IPv6 connectivity by allowing IPv4 to fail if IPv6 succeeds + Allow proxying of DNSSEC data when using the dnsmasq local caching nameserver plugin + Add support for multiple domain names sent from VPN plugins - Add NetworkManager Supplements to NetworkManager-device-plugin-wimax so that it gets automatically installed by default. - Update to version 0.9.3.995: + Linux Wireless Extensions (WEXT) support can be disabled at configure time with --with-wext=no + IPv6 Privacy Extensions are now enabled by default for new connections + Support for checking Internet connectivity has been added + The ifnet system config plugin rewrites config files less often - Add pkgconfig(libsoup-2.4) BuildRequires and pass - -enable-concheck to configure to enable internet connectivity check. - Add with_wimax define, which prepares NM for wimax. If with_wimax is defined to 1: + Add pkgconfig(libiWmxSdk-0) BuildRequires + Change --disable-wimax to --enable-wimax in configure + Create NetworkManager-device-plugin-wimax subpackage - Get ready for full-switch to systemd: + Add a with_systemd macro, currently set to 0 as the systemd support implies no support for ConsoleKit, which we want to keep until sysvinit is not supported anymore. + Add pkgconfig(libsystemd-login) BuildRequires and pass - -with-session-tracking=systemd to configure if we build systemd support. - Move to libnl3: + Remove pkgconfig(libnl-1) BuildRequires. + Add pkgconfig() BuildRequires: libnl-3.0, libnl-genl-3.0, libnl-route-3.0. - Remove libiw-devel BuildRequires: it's not needed anymore. - Stop changing libexecdir to %{_prefix}/lib/NetworkManager: there is no need for this. - Update to version 0.9.3.990: + Better handling of WiFi devices via nl80211 when available (instead of WEXT) + IP configuration is now non-blocking; waiting for IPv6 RA no longer blocks the device from activating if IPv4 is ready and vice versa + Addded support for firewall "zones" via FirewallD + Added basic support for bonded interfaces + WiFi connections are no longer locked to a specific MAC address if they are "locally administered" addresses (ie, 02:::::) + New state change reasons have been added for mobile broadband PIN errors + Agent-owned secrets are now sent to agents for newly created connections + Support for non-UTF8-encoded 802.1x passwords has been added + libnm-glib now fetches some properties more aggressively (like active connections, access points, etc) + Added basic support for IP-over-Infiniband interfaces + Added support for device plugins and converted WiMAX support to a plugin for easier packaging and simpler dependencies + Added support for VLAN interfaces + Added support for 802.1x EAP-FAST authentication + Added non-blocking mode and API to libnm-glib - Rebased systemd-network-config.patch. - Split typelib files into their own subpackages: typelib-1_0-NetworkManager-1_0 and typelib-1_0-NMClient-1_0. - Add typelib-1_0-NetworkManager-1_0 and typelib-1_0-NMClient-1_0 Requires to devel subpackage. - Update systemd-network-config.patch to handle NM_TIMEOUT value 0 as no timeout (bnc#730628). - Really enable parallel build: fix typo smp_flags => smp_mflags. - Update to version 0.9.2.0: + Fixes for building with recent GLib versions. + Don't update routing and DNS until a device is managed. + Fix bug causing IPv6 RA-provided routes to be ignored. + Fix possible wrong handling of 'keyfile' connection certificates. + Correct Shared connection IP address range to be as documented. - Update to version 0.9.1.95: + Fix a crash when deleting default wired connections + Fix a security issue in the ifcfg-rh plugin with newlines in file names + Fix the "SpecificObject" property for active VPN connection objects + Improve handling of rfkill on some platforms + Spaces no longer used in ifcfg config file names + IPv6 RAs are now accepted when forwarding is configured + dnsmasq local caching nameserver plugin cache size bumped to 400 entries (from 150) + Fix handling of SSIDs in the keyfile plugin + Fix some GObject Introspection annotations in libnm-glib and libnm-util + Fix setting hostnames from DHCP - Drop nm-udev-rfkill-handling.patch: fixed upstream. - avoid annoying polkit popups when connecting to 802.11x networks that are supposed to ask for passwords (bnc#713639) - also avoid asking for a password (and thereore polkit auth) when an AP goes of range. - Add nm-udev-rfkill-handling.patch to improve the rfkill handling (bnc#709733,bgo#655773) - Update systemd-network-config.patch to correctly handle /usr over NFS. - Use latest systemd rpm macros. - Update to version 0.9.1.90: + Support for libnl2 and libnl3 and various leak fixes + Various small bug fixes in the ifnet config plugin + Ensure IPv6 link-local DNS servers work correctly in the dnsmasq DNS plugin + Add ability for nmcli to delete connections + Fix setup of connection sharing with newer iptables versions + Ensure WiMAX activation emits correct signals (fixes initial signal strength) + Fix an issue with duplicated keyfile connections + Ensure the 'novj' options is passed through to pppd + Store timestamps for VPN connections too - Remove explicit Requires for libnl: this is a library, so the right Requires will be automatically be added. - Remove redundant tags/sections from specfile - Implement baselibs for package - Update systemd-network-config.patch to enable NetworkManager-wait-online.service too (and read timeout value from /etc/sysconfig/network/config). - Apply shared library packaging policy (bnc#689039): + Create libnm-util2, libnm-glib4, libnm-glib-vpn1 subpackages. + Add Provides/Obsoletes for NetworkManager-glib to libnm-glib4. + Changes NetworkManager-glib Requires in devel subpackage to libnm-util2, libnm-glib4 and libnm-glib-vpn1 Requires. + Remove NetworkManager-glib Requires from main subpackage: there is no reason to have an explicit Requires for the libraries. - Merge doc subpackage in devel subpackage, with appropriate Provides/Obsoletes. - Rename nm-system-settings.conf source to NetworkManager.conf, to follow the new non-deprecated scheme for configuration. Note that this uses the same format, so there's nothing to adapt. If users have an old modified version of nm-system-settings.conf, then it will still be used. Fix bnc#689042. - Mark %{_sysconfdir}/NetworkManager/NetworkManager.conf with %config(noreplace). - Add empty systemd macro to fix build on 11.4 - Update systemd-network-config.patch to disable dbus activation for NetworkManager, it was causing KDE timeout when NM was not handling network (bnc#714962). - Update to version 0.9.0: + fdo#39463: Ensure NM can talk to newly installed VPN plugins + Don't autoconnect disabled modems. + Preserve agent secrets the right way. + Preserve agent secrets over Update operation. + Add libnl-3 API compatibility. + Add libnl-2 support with libnl-1 compatibility. + Fix DBus signal signatures in supplicant. + Handle a few more possible D-Bus activation errors. + Fix integer list SSID parsing. + bgo#652512: Fix crash for AddAndActivateConnection() D-Bus call + Add missing U2600 GSM band enumeration. - Drop f15-branch.patch: No longer required. - no longer package /var/run/NetworkManager, not used by NM anymore. Package /var/lib/NetworkManager instead. - Add systemd-network-config.patch: follow network configuration to not start NM under systemd if it is disabled system-wide. - enable systemd service for NetworkManager - Update to version 0.8.9997: + Fix symbol exports in libnm-glib. + Fix some gobject introspection annotations. + WiMax fixes : do not attemp to connect when scanning. + Recognize PKCS#8 private keys and check passwords. + Allow _ as valid character for GSM APN. + Improve PolicyKit integration. + Fix up Ad-Hoc frequency when connecting. + Don't complay if ConsoleKit database isn't found at startup. + Improve openconnect migration. + Handle DHCP options perperty correctly. + Only send hostname without domain as host-name option for DHCP. + Fix crash when SSID is missing + Make auto-activation retries really work. + Fix dispatcher handling of empty VPN interface. - Update f15-branch.patch from the git branch. - Update to version 0.8.999: + IPv6 compliance and RDNSS lifetime fixes + systemd cooperation fixes + API fixes for clients creating wifi connections + API additions to make client code simpler + Startup efficiency fixes by not parsing the ConsoleKit database more than required + Fixes for IBM s390 CTC-type network devices + Fixes for WWAN enable/disable status + Fixes for ifcfg-rh configuration plugin handling of IP addresses + Support for Easytether Android handset tethering + Better handling of rfkill for WiFi and WiMAX interfaces + Addition of IPv6 support for dispatcher scripts + Fixed handling of DER-format certificates - Update f15-branch.patch from the git branch. - Remove polkit-unauthorized-privilege filter from NetworkManager-rpmlintrc as polkit-default-privs got updated. - Update NetworkManager-rpmlintrc: + Remove filter for suse-dbus-unauthorized-service, this got fixed. + Update polkit-unauthorized-privilege to be more specific since only org.freedesktop.NetworkManager.settings.modify.hostname is missing now. + Mention bnc#680140, where we are tracking this. - Move to pkgconfig()-style BuildRequires: + Old ones: dbus-1-devel, dbus-1-glib-devel, libgudev-1_0-devel, libnl-devel, libuuid-devel, mozilla-nss-devel, polkit-devel. + New ones: dbus-1, dbus-glib-1, glib-2.0, gudev-1.0, libnl-1, nss, polkit-gobject-1, uuid. - Remove libgcrypt-devel BuildRequires: it's only needed if we don't use nss. - Remove explicit Requires for various packages in devel subpackage as they should be brought with pkgconfig() magic: dbus-1, dbus-1-glib, dbus-1-devel, glib2-devel, dbus-1-glib-devel, libgcrypt-devel, libgpg-error-devel. - Add fdupes BuildRequires to remove duplicate files in /usr/share/gtk-doc. - Do not call /sbin/ldconfig in %post/%postun of main binary package as there is no library there. - Stop manually building nm-online: it's already installed with the standard build. - Drop NetworkManager-frontend.conf as this was for the NetworkManager 0.8 world. This is now integrated in /etc/dbus-1/system.d/NetworkManager.conf. Fix bnc#689043. - Ship /etc/NetworkManager/VPN directory. - Add back f15-branch.patch: all patches from Fedora15 branch, mostly for fixing compatibility issues. - Update to version 0.8.998 (0.9.0-rc1): + Fix memory leaks + libnm-glib: Fix crashes + Fix wired connection completion + Updated translations. + Bugs fixed: bgo#646300, bgo#646115, bgo#646335, bgo#646375, bgo#645927. - Drop f15-branch.patch: merged. - Remove autoreconf call: no more patches. - Add f15-branch.patch: all patches from Fedora15 branch, mostly for fixing compatibility issues. - Update to version 0.8.997 (0.9 beta3): + Mostly bugfixes and backwards compatible D-BUS changes. - Update to version 0.8.996 (0.9 beta2): + don't require glib 2.26 + deb#615082, lp#725041: fixes for new dnsmasq + crash fixes + ifupdown plugin fixes + save connection timestamps in /var not /etc + install time fixes for Arch Linux + libnm-glib crash and correctness fixes + fix display of SSIDs in applet tooltips + build fixes and cleanups + import existing user connections - Summary from 0.8.995 (0.9 beta1) + simpler, easier, more flexible, and cooler applets. + Fast User Switching. + WiMAX support. + System connections by default. + More flexible system administration. + Scales down to smaller devices. - Drop patches fixed upstream: + nm-64bit-timestamp.diff + nm-nis-domain.diff + nm-crash-lack-ipv4.patch + nm-ignore-temp-files.patch + nm-stop-touching-hosts.patch + nm-destory-crash.patch - Add pkgconfig(systemd) BuildRequires for systemd integration support. - Add gobject-introspection-devel BuildRequires to get introspection support. - Pass --disable-wimax to configure for now as we don't have the libraries for it. - Add nm-destory-crash.patch, fix crash when NM exit(bnc#673627). - Add the nm-stop-touching-hosts.patch to stop touching /etc/hosts. (bnc#667265) - Added autoreconf since nm-ignore-temp-files.patch needs more than touching Makefile.in. - Add nm-ignore-temp-files.patch: stop NM from filling dmesg and logs by ignoring temporary files (bgo#602868) (bnc#668183) Original upstream patch has been extended to also touch Makefile.in in order to avoid having to re-bootstrap. - Add nm-crash-lack-ipv4.patch to fix a crash during exit: lack of an IPv4 setting indicates DHCP (bnc#664640). - Stop removing sr@Latn translation: it was added by translation-update-upstream, and the script got fixed now. - Add patch to fix NM crash (bnc#655685) - Add patch to fix NM crash with ethernet (bnc#655505) - Remove sr@Latn as it's a duplicate of sr@latin and no valid locale. - Update to version 0.8.2: + Native local caching nameserver support using dnsmasq + Automatically detect addition and removal of new VPN plugins + Support for handling suspend/resume signals from UPower + Ensure users are allowed to enable/disable WiFi and networking + Ensure WiFi enable state is preserved across reboot and suspend + Better handling of /etc/hosts and preservation of custom hostnames + Support for the systemd session management service + Better handling of 'keyfile' system connection errors + Support for S390 network devices + and much more... - Split out lang package. - Pass --with-docs to configure. - Change --with-dhcp-client configure option to --with-dhclient. - Re-enable parallel build. - Update to version 0.8.1: + Bluetooth Dial-Up Networking + nmcli: a command-line interface for controlling NetworkManager + Mobile Broadband Status: signal strength, roaming, and access technology display + Enhanced IPv6 support: including DHCPv6 and tons of fixes + Logging and Debugging: make NM as quiet or verbose as you like - Drop NetworkManager-netconfig-exit-quick.patch, upstreamed. - Drop NetworkManager-NIS.patch, no longer required. - nfs script should not use nfs restart(bnc#559021). - Add SPARC targets to %files list - Reword comment about locations of files (since sparcv9 is neither single-arch nor a 64-bit environment) - Update NetworkManager-NIS.patch, init the variable(bnc#618599). - Add NetworkManager-netconfig-exit-quick.patch, fix wrong return value when updating the DNS with netconfig(bnc#595708, bnc#544195, bnc#537907, bnc#596163). - Add NetworkManager-NIS.patch, support NIS domain and servers (bnc#608677). - Minor spec-cleanup. - fix NetworkManager dependencies * ModemManager and dnsmasq should be recommended, not required * should Require iproute2,iputils and ppp * Should Recommend iptables - remove not needed build time dependency on dhcp-client - Add a general dbus conf file for nm-applet, cnetworkmanager and NetworkManager-kde4(bnc#476502). - Update to version 0.8: + introspection: fix inclusion of Dhcp6Config XML + crypto: de-init NSS after calling PR_GetError() + ifcfg-rh: read and write DHCPv6 connections + policy: fall back to original hostname before trying reverse DNS + bluetooth: finish DUN implementation + introspection: sync device state reason code with NetworkManager.h + policy: be more selective when adding hostname to /etc/hosts + gsm: handle PIN requests during modem enable too + system-settings: register setting errors so D-Bus errors are meaningful + Updated translations. - Add NetworkManager-rpmlintrc to list of sources. - Fix self-obsoletion of dhcdbd. - Update to version 0.7.999: + ifcfg-rh: formatting fix + ifcfg-rh: handle missing PREFIX by generating one + ifcfg-rh: ensure IPv6 addresses are cleared when none get written out + ifcfg-rh: add IPv6 addressing and routes support (rh #523288) + backends: add backend for Pardus + libnm-util: fix NMDeviceBt hardware address property + core: ensure failed /etc/hosts update writes out well-formatted file (lp#471498) + olpc-mesh: fix companion path and active channel property types + netlink: work around kernel cache refill problems + keyfile: add IPv6 support (bgo #593814) + libnm-util: add IPv6 comparison functions + Translation updates - Remove 0006-NIS-patch.patch, 0007-Fix-etc-hosts-updating.patch, nm-hal-tree-changes.patch and 0009-Implement-sending-system-hostname-with-DHCP-client.patch. These patches were not applied - Upgrade to the latest upstream 0.8 branch: + Add support for Bluetooth DUN devices. + Add support to manually deactivate active devices. + Much improved killswitch handling. + The state (networking, wireless, ...) is now remembered after reboots. + The system settings daemon is removed and the main daemon has support for distribution specific plugins now. + The keyfile plugin supports a lot more data formats now (human readable IP addresses, passwords without hashing etc). Add back the support for certificate file paths. + Add back support for multiple CA certificate per (.PEM) file. + HAL usage is replaced with gudev. + IPv6 support. + Documentation updates. + Lots of bug fixes. - Never fall back to manually updating resolv.conf, even if netconfig fails (bnc #537907, #544195). - Fix a segfault introduced by the updated ModemManager patch (bnc #538180). - HAL added 'ssb' (Silicon Sonics Backplane, used internally on most Broadcom ethernet and wifi chipsets) in 0.5.13, which changed the device list layout and made NM unable to get the driver for the wifi device. Fix that (bnc #526105). - Fix issues with root being at_console (bnc #530430). - Require libiw-devel for building instead of wireless-tools. - Update to latest 0.7.1 upstream + Handle ZTE (Onda) device port types + Wait 20 seconds (instead of 15) for PPP connections to come up + Block until netconfig exits + Allow 63 byte long PSK + Fix dbus reconnection + Handle unsolicited supplicant scans + Other fixes - Add 0013-iptables-path.patch to correct path for iptables, it lives in /usr/sbin. - Added Build dependency for libuuid - Update to 0.7.1: + Plays better with stupid wifi and ethernet drivers. + Support for rfc3442 classless static routes. + The default "Auto eth0" connection is now read/write. + Compatibility fixes for 802.1x PEAP authentication and 3G/PPP connections. + Reduced wakeups for power saving awesomeness. + Ability to deny specific devices the default route. + More correct display of wifi signal strength. + Custom IPv4 settings for mobile broadband connections. + More informative display of network device state. + Lots of bugs fixed. ==== accountsservice ==== Subpackages: libaccountsservice0 typelib-1_0-AccountsService-1_0 - Enable as-fate318433-prevent-same-account-multi-logins.patch for Leap as requested by the Leap Release Manager (boo#994876). ==== akonadi-calendar ==== Version update (16.04.3 -> 16.08.0) - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== akonadi-contact ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5AkonadiContact5 - Build only on architectures supported by libqt5-qtwebengine - Update RPM group classifcation. Drop unused macros. - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Cleanup build requirements - Drop no longer respected QTWEBENGINE_SUPPORT_OPTION from cmake (QtWebEngine is mandatory now) - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== akonadi-mime ==== Version update (16.04.3 -> 16.08.0) - Update RPM group classifcation. Drop unused macros. - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Cleanup build requirements - Drop no longer respected QTWEBENGINE_SUPPORT_OPTION from cmake - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== akonadi-notes ==== Version update (16.04.3 -> 16.08.0) - Update RPM group classifcation. Drop unused macros. - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Cleanup build requirements and remove unnecessary requires from the devel package - Drop no longer respected QTWEBENGINE_SUPPORT_OPTION from cmake - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== akonadi-search ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5AkonadiSearch - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== akonadi-server ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5AkonadiAgentBase5 libKF5AkonadiCore5 libKF5AkonadiWidgets5 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== analitza ==== Version update (16.04.3 -> 16.08.0) Subpackages: libAnalitza5 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== apparmor ==== Subpackages: apparmor-abstractions apparmor-docs apparmor-parser apparmor-profiles apparmor-utils libapparmor-devel libapparmor1 libapparmor1-32bit pam_apparmor pam_apparmor-32bit perl-apparmor python3-apparmor - add changes-since-2.10.1--r3326..3346.diff with upstream changes and fixes since the 2.10.1 release, including - allow dac_override in winbindd profile (boo#990006#c5) - allow mr for /usr/lib*/ldb/*.so in samba abstractions (needed since Samba 4.4.x, boo#990006) - abstractions/nameservice: also support ConnMan-managed resolv.conf - let aa-genprof ask about profiles in extra dir (again) - fix aa-logprof "add hat" endless loop (lp#1538306) - honor 'chown' file events in logparser.py - ignore log file events with a request mask of 'send' or 'receive' because they are actually network events (lp#1577051, lp#1582374) - accept hostname with dots when parsing logs (lp#1453300 comments #1 and #2) - fix python LibAppArmor import failures with swig > 3.0.8 (boo#987607) (libapparmor-fix-import-path.diff) - refresh apparmor-abstractions-no-multiline.diff - drop upstreamed profiles-ping-inet6-r3449.diff - add %check section - runs libapparmor (including swig bindings), parser and profiles tests - add BuildRequires: perl(Locale::gettext) - needed for parser tests ==== ark ==== Version update (16.04.3 -> 16.08.0) Subpackages: libkerfuffle16 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== attica-qt5 ==== Version update (5.24.0 -> 5.25.0) Subpackages: attica-qt5-devel libKF5Attica5 - Do not rely on pkg-config being pulled in by something else; make sure pkgconfigdeps.sh runs without a doubt. - Update to 5.25.0 * Qt >= 5.5 is now required * Follow HTTP redirects * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== autoyast2 ==== Version update (3.1.147 -> 3.1.149) Subpackages: autoyast2-installation - Profile Location: Use Report instead of Popup to not block AutoYast if not configured to. (bnc#988949) - 3.1.149 - Fixed: Setting timeout for error popups has not been possible. (bnc#988949) - 3.1.148 ==== baloo5 ==== Version update (5.24.0 -> 5.25.0) Subpackages: baloo5-devel baloo5-file baloo5-imports baloo5-kioslaves baloo5-tools libKF5Baloo5 libKF5BalooEngine5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== baloo5-widgets ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== blinken ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== bluedevil5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php - Adjust filelist for the plasmoid appdata, installed with KF > 5.25.0 ==== bluez-qt ==== Version update (5.24.0 -> 5.25.0) Subpackages: bluez-qt-devel bluez-qt-imports bluez-qt-udev libKF5BluezQt6 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== bovo ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== breeze ==== Version update (5.7.3 -> 5.7.4) Subpackages: breeze5-cursors breeze5-decoration breeze5-style breeze5-wallpapers - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== breeze-gtk ==== Version update (5.7.3 -> 5.7.4) Subpackages: gtk2-metatheme-breeze gtk3-metatheme-breeze metatheme-breeze-common - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php - Add update_from_BreezeGTK.patch to fix the GTK theme settings on upgrades from Leap 42.1, which shipped with BreezyGTK (boo#994832) ==== breeze5-icons ==== Version update (5.24.0 -> 5.25.0) - Update to 5.25.0 * Qt >= 5.5 is now required * Update mail- 16px icons to recognize the icons better * Update mic and audio status icons to have the same layout and size * New System Settings app icon * Add symbolic status gnome icons * Add gnome 3 symbolic icon support * Added icons for Diaspora and Vector, see phabricator.kde.org/M59 * New icons for Dolphin and Gwenview * Weather icons are status icons no app icons * Add some links to xliff thanks gnastyle * Add kig icon * Add mimetype icons, krdc icon, other app icons from gnastyle * Add certificate mimetype icon (kde#365094) * Update gimp icons thanks gnastyle (kde#354370) * Globe action icon is now no linked file please use it in digikam * Update labplot icons according to mail 13.07. from Alexander Semke * Add app icons from gnastyle * Add kruler icon from Yuri Fabirovsky * Fix broken svg files thanks fuchs (kde#365035) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== calendarsupport ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5CalendarSupport5 - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== cantarell-fonts ==== Version update (0.0.24 -> 0.0.25) - Update to version 0.0.25: + Outline and spacing on C,G. + Improved terminals on numerous glyphs. + Weight/stem width fixes (k,G). + Port imrpovements from regular to bold. + Improved metrics. + Fixes to f-ligatures. + Shape fixes to some numerals. + Fixes to anchors > composited glyphs. ==== ceph ==== Version update (10.2.2+git.1471622341.b446b70 -> 11.0.0+git.1472455009.a17726c) Subpackages: librados2 librbd1 - pre_checkin.sh: add Source line for ceph-rpmlintrc - move Source line for ceph-rpmlintrc from ceph.spec to ceph-test.spec (see https://github.com/SUSE/ceph/pull/60 for rationale) - Update to version 11.0.0+git.1472455009.a17726c: + ceph.spec.in: drop ceph-rpmlintrc source line + ceph.spec.in: drop epoch prefixes - Update to version 11.0.0+git.1472384770.c9f3af8: + test/rgw: add --gateways-per-zone to test_multi.py + rgw: RGWDataSyncCR fails on errors from RGWListBucketIndexesCR + rgw: RGWCoroutinesManager::run returns status of last cr + os/bluestore: fix whitespace in bitset apply helper + cmake: do not link secret.c if not necessary + cmake: do not link against keyutils if not necessary + os/bluestore: fsck on mkfs (on by default) + os/bluestore: ensure block device size is a multiple of the block size + Revert "ceph.spec.in: don't try to package __pycache__ for SUSE" + rpm: force creation of Python 3 __pycache__ on SUSE + doc: add v0.94.7 changelog + doc: add v0.94.8 changelog + doc/releases: add v0.94.8 to timeline + doc/release-notes: fix v10.2.2 changelog link + unittest_bluefs: fix block device sizes + doc: do not list all major versions in get-packages.rst + doc: add missing PR to hammer 0.94.8 release notes + doc: release-notes.rst: move misplaced line + doc: fix two broken links in releases.rst + doc: add 11.0.0 to releases table - pre_checkin.sh: forward-port insert_line_before() function from filesystems:ceph:jewel/ceph version - README-ceph-test.txt: new file - ceph-test.spec: add ceph_ver_hack.sh as a source file - Update to version 11.0.0+git.1472202104.8999301: + rgw: add deadlock detection to RGWCoroutinesManager::run() + src/common/lockdep.cc Reduce logging noise if lockdep is not tested + osd: fix updating same_interval_since logic of project_pg_history() + osd: drop duplicated sched_scrub during tick() + osd: move methods which don't need osd_lock from tick into tick_without_osd_lock() + mon/PGMonitor: mark dump_object_stat_sum() as static + mon/PGMonitor: calc the %USED of pool using used/(used+avail) + rpm: proper packaging of udev directories + LTTng-UST disabled for openSUSE + ceph-disk: do not activate device that is not ready + osd: update reture type of get_pg_or_queue_for_pg() to PGRef + common/WPQ: add sanity check to avoid potential access violation + osd/osd_types: kill undefined_shard() method of pg_shard_t + release-notes.rst: draft 0.94.8 release notes + PG: introduce and maintain upset + mon/MonClient: should update sub_sent with sub_new + osd: set objecter.osdmap when starts + rgw: fix for assertion in RGWMetaSyncCR + PG: use upset rather than up for _update_calc_stats + rgw: do not try to encode or decode time_t + cls_rgw: fix the compiler warning + msg/async: fix compiler warnings + os/filestore: silence compiling warnings + test/rbd: silence compiling warnings + rgw: silence a compiling warning + msg/async/kqueue: avoid remove nonexist kqueue event + librbd: cache was not switching to writeback after first flush + mon/OSDMonitor: fix potential division-by-zero error + mon/OSDMonitor: get rid of snprintf when formatting output string + mon/OSDMonitor: avoid duplicated calls when determining osdmap boundary + osd/OSDMonitor: avoid duplicated assignment of oldest_map/newest_map + osd/OSDMonitor: drop redundant check of exists() + mon/PGMonitor: skip scrub checking if we can + mon/PGMonitor: drop redundant loading of dumpcontents + mon/PGMonitor: fix potential underflow + debian: replace SysV rbdmap with systemd service + os/bluestore: break down onode vs bnode_map size in log + os/bluestore/BlueFS: do direct io by default (not buffered) + os/bluestore/BlueFS: rename buffered_io option + os/bluestore: add multiple finishers to bluestore + os/bluestore: fix decoding hash of bnode + cmake: fix unmatched endforeach + debian: enable dh_python3 for python3 packages + debian: exclude python3* packages in dh_shlibdeps + debian: drop python-argparse dependency + os/bluestore: fix race condition during get_fs_usage() + os/bluestore: use bluefs_max_prefetch for log file prefetch + os/bluestore: use hex if we are running out of space + os/bluestore: fix assert + osd: bail out if transaction size overflows + os/filestore/FileJournal: bail out if transaction is too large + os/FuseStore: remove unneeded header file + os/Memstore.h: add override to virtual functions + os/MemStore: move OmapIteratorImpl to cc file + os/bluestore: include bluefs space in statfs result + common/config_opts: fix comment(radio -> ratio) + msg: kill unused macros + mon/OSDMonitor: add output field name of average/overload_utilization + test/librados: rados_connect() should succeed + ceph-osd-prestart.sh: check existence of OSD data directory + osd/ReplicatedPG:wipe off param op from generate_subop() + ceph-post-file: migrate to RSA SSH keys + ceph-post-file: Ignore keys offered by ssh-agent + os/Memstore: move PageSetObject class to .cc file + yasm-wrapper: dont echo the yasm command line + arch/arm.c: remove unnecessary variable read for simplicity + rpm: drop obsolete libs-compat metapackage + ceph.spec.in: drop trouble-making divider comments + rpm: do not unnecessarily spawn shells for scriptlets + cls_lock: support updating the lock cookie without releasing the lock + librbd: helper state machine to update lock cookie + librbd: store exclusive lock cookie instead of recalculating + librbd: exclusive lock now supports reacquiring a lost lock + librbd: helper state machine for asynchronous watch recovery + librbd: integrate asynchronous image rewatch state machine + librbd: image state machine now has hooks for lock requests + librbd: interlock image refresh and lock operations + librbd: remove unused refresh request logic + test/common/test_util.cc: FreeBSD does not have distro information + README.md: replace package build instructions with tarball instructions + doc: fix singleton example in Developer Guide + rgw: delete region map after upgrade to zonegroup map + rgw: fix period update --commit return error + cmake: use PERF_LOCAL_FLAGS only if defined + tests: populate /dev/disk/by-partuuid for scsi_debug + ceph.spec.in: don't try to package __pycache__ for SUSE + doc: fix wrong osdkeepalive name in mount.ceph manpage + rados-striper.sh: Use expect_failure and conditional stringmatching + Revert "ceph.spec.in: ppc64 build in Tumbleweed only" + jerasure: include generic objects in neon jerasure lib (like sse3/4) - pre_checkin.sh: fix package files path rewriting - _constraints: tweak values to pick up maximum number of OBS build workers - Update to version 11.0.0+git.1471969747.79ca12e: + cmake: fix declaration position of WITH_TESTS option - Update to version 11.0.0+git.1471959548.f013b97: + rpm: Renamed bcond tests flag to make_check + cmake: Use WITH_TESTS flag to guard the build of ceph-test scripts/binaries + rpm: Added ceph_test_package bcond flag to control the build of ceph-test package ==== cervisia ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== cmake ==== - Respect CFLAGS while bootstraping - Remove wrong FIXME from the spec - Add relwithdebinfo as default target to ease living of sci packages - Add possibility to switch between ninja and cmake by defining %__builder ninja prior %cmake call bnc#995752 ==== cogl ==== Version update (1.22.0 -> 1.22.2) Subpackages: cogl-devel gstreamer-plugins-cogl libcogl-gles2-20 libcogl-pango20 libcogl20 typelib-1_0-Cogl-1_0 typelib-1_0-Cogl-2_0 typelib-1_0-CoglGst-2_0 typelib-1_0-CoglPango-1_0 typelib-1_0-CoglPango-2_0 - Add 0001-fix-build-failure-with-Werror-undef.patch: Fix build failure for SLE (bgo#770533). - Update to version 1.22.2: + Skip journal dumping if not supported (bgo#728355). + Support glMapBufferRange from ES3 (bgo#728355). + Improvements in the KMS winsys (bgo#756926, bgo#758073). + Require gettext 0.19 to avoid hacks (bgo#760285). + Respect the Wayland spec for EGL surface creation (bgo#765351). + Updated translations. - Drop cogl-GLES-Support-glMapBufferRange.patch and cogl-fix-black-login-screen.patch: Fixed upstream. ==== dolphin ==== Version update (16.04.3 -> 16.08.0) Subpackages: dolphin-part libdolphinvcs5 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== dragonplayer ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== eventviews ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5EventViews5 - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== extra-cmake-modules ==== Version update (5.24.0 -> 5.25.0) Subpackages: extra-cmake-modules-doc - Update to 5.25.0 * Qt >= 5.5 is now required * Fix inclusion when there's no Qt5 * Add a fallback method for query_qmake() when there's no Qt5 installation * Make sure ECMGeneratePriFile.cmake behaves like the rest of ECM * Appstream data changed its preferred location * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== frameworkintegration ==== Version update (5.24.0 -> 5.25.0) Subpackages: frameworkintegration-devel frameworkintegration-plugin libKF5Style5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== gcr ==== Subpackages: gcr-data gcr-prompter gcr-viewer libgck-1-0 libgck-devel libgcr-3-1 libgcr-devel typelib-1_0-Gck-1 typelib-1_0-Gcr-3 typelib-1_0-GcrUi-3 - Update to GNOME 3.20 -- Fate#318572. ==== gitg ==== Version update (3.20.1 -> 3.20.2) Subpackages: gitg-lang libgitg-1_0-0 libgitg-ext-1_0-0 - Update to version 3.20.2: + Set primary selection to selected commit SHA1. + Scrollable commit message in diff view. + Incremental loading on large repositories. + Faster switching of large repositories. + Create global git config if it does not exist yet. + Remember opened projects regardless of gnome privacy settings. ==== gnome-packagekit ==== - Installation of local files has been removed from gpk, avoid registration of bad rpm mime handler. See boo#941862, bgo#766896 - Update to GNOME 3.20 Fate#318572 - Drop patch license-agreement-title.patch: fixed upstream. - Rebase bnc#881245-update-test-affects-package-manager-should-restart-gpk-update-viewer.patch - Remove py_requires: The python helper functions have been removed since version 3.11.1. - Update to version 3.20.0: + Add a missing tag to the AppData file. + Add resizing to various modal dialogs. + Updated translations. - Disable gnome-packagekit-displaysize.patch: Upstream solved the issue an other way, lets test if we can drop the patch we carry. - Replace libcanberra-devel for pkgconfig(libcanberra-gtk3) BuildRequires: Needed now that libcanberra-devel has been split, and it is what configure looks for. - Add bnc#939278-gnome-packagekit-asks-for-reboot-password-too-early.patch Asks for reboot passwd too early (bnc#939278). - Move gpk-application.appdata.xml to -extras package, where also the .desktop file resides. - Add bnc-946886-install-signatures-in-viewer.patch -- install signatures in gpk-update-viewer if needed (bsc#946886). - Update to version 3.18.0: + Updated translations. - Update to version 3.17.90: + Ensure to escape package and vendor name. + Consider available packages as updatable. + Set minimum content height for scrolledwindows. + Avoid registering two main desktop file categories. + Updated translations. - Rebase gnome-packagekit-OnlyShowIn.patch. - Add patch license-agreement-title.patch: fix license agreement title (bsc#927319). - Update to version 3.16.0: + Updated translations. - Update to version 3.15.92: + Updated translations. - Update to version 3.15.91: + Updated translations. - Update to version 3.15.90: + Remove the dialog to run newly installed software. - Update to version 3.15.4: + Add suitable Keywords to the package updater desktop file. + Update executable blacklist for gnome-terminal. + Updated translations. - Update to version 3.15.3: + Avoid conflict with new GTK+ API. + Updated translations. - Rebase gnome-packagekit-OnlyShowIn.patch. - Update to version 3.14.2: + Bugfix: Set a more reasonable size request for gpk-update-viewer. + Updated translations. - Add gpk-prefs to category X-GNOME-SystemSettings so it shows up in gnome-control-center. - Update to version 3.14.0: + Updated translations. - Add patch bnc#881245-update-test-affects-package-manager-should-restart-gpk-update-viewer.patch: ensure gpk-update-viewer is restarted when restart_suggested is part of the update flags. Initial patch by Roy Ley Mu (bnc#881245). - Update to version 3.13.92: + Bugfix: Do not use PkDesktop. + Updated translations. - Update to version 3.13.91: + Bugfix: Properly call polkit and dbus for reboot. + Updated translations. - Drop gnome-packagekit-fix-polkit-usage.patch: Fixed upstream. - Update to version 3.13.90: + Add <project_license> to the AppData file. + Disable check for updates if gpk-update-viewer is uninstalled. + Don't default to -g -fexceptions. + Fixed first character eating. + Improve Application column results in gpk-log. + Remove out-of-date user help. + Rename gpk-log to Package Log. + Updated translations. - Add gnome-packagekit-fix-polkit-usage.patch: properly call polkit and dbus for reboot (bnc#881221). - Drop gnome-icon-theme Requires: no longer required after the merging of the themes into Adwaita theme, which in turn is a dependency to GTK+ 3.0. - Add category X-GNOME-SystemSettings to gpk-prefs.desktop so that gnome-control-center can recongnize and show it (bnc#866235). - Add category X-GNOME-SystemSettings to gpk-prefs.desktop so that gnome-control-center can recongnize and show it (bnc#866235) - Update to version 3.12.2: + Updated translations. - Update to version 3.12.1: + Updated translations. - Update to version 3.12.0: + Fix grammar. + Updated translations. - Update to version 3.11.90: + Consistently name gpk-prefs as Package Sources. + Remove uses of the term "software update". + Updated translations. - Update to version 3.11.5: + Fix compile with --disable-systemd. + Rename the 'Software Install' action to 'Package Install'. + Consistently use the name 'Packages'. + Use the name 'Package Updater' to avoid confusion with gnome-software. + Updated translations. - Drop gpk-expand-repos-and-softwarelog.patch, fixed upstream. - Update to version 3.11.4: + Adjust for PackageKit depends/requires API changes. + Drop the rest of service pack support. + Fix incorrect-fsf-address. + Fix progress label in Software Sources. + Revert "Use the term software more consistently". + Spelling fixes. + Wrap license text. + Updated translations. - Update to version 3.11.3: + Remove catalog support. + Remove the service pack support. + Bugfixes: - Do not use deprecated libpackagekit functionality. - Do not use the deprecated (and unused) PkMessage. - Do not use the deprecated (and unused) UpgradeSystem. - Fix compile with newer versions of PackageKit. - Never, ever, use Werror. - Standardize Help/About/Quit in the app menu. + Updated translations. - Rebase gnome-packagekit-OnlyShowIn.patch. - Update to version 3.11.1: + New (and removed) Features: - Modernise a few of the Glade files. - Remove gpk-distro-upgrade. - Remove the gpk-install-catalog binary. - Remove the gpk-install-mime-type binary. - Remove the gpk-install-package-name binary. - Remove the gpk-install-provide-file binary. - Remove the python helper functions. - Translate the AppData file. + Bugfixes: - Do not set gnome-settings-daemon schema in the prefs program. - Do not show a 'Check now' button in the prefs. - Do not show a critical warning when we try to remove a missing GSource. - Do not support ConsoleKit anymore for restart detection. - Do not use deprecated GTK symbols. - Do not use the DesktopDB in gpk-application. - Don't link to UPower as it is not needed by anything. - Fix the AppData name to be less generic. - Never pass relative paths to the session interface. - Remove EggDBusMonitor as it was basically unused. - Show the whole list in the window when showing repos. - Use 16:9 screenshots in the AppData files. + Updated translations. - Dro plibupower-glib-devel BuildRequires: no longer required. - Rebase gnome-packagekit-OnlyShowIn.patch. - Clean .desktop file handling as per removed features. - Add gpk-expand-repos-and-softwarelog.patch, properly expand list of repositories and software log, making them readable. Taken from upstream git. - Add missing patchtag to patch1. - Remove conflict with otherproviders(org.freedesktop.PackageKit.service): the conflict was solved on file-level by renaming the service file provided by apper (bnc#846342). - Update to version 3.10.1: + Use the new 16:9 AppData screenshots. + Add Copyright information to the AppData files. + Updated translations. - Update to version 3.10.0: + Updated translations. - Update to version 3.9.92: + New Features: - Add some desktop file categories. - Add two AppData files for gnome-software. - Open Listaller packages with gpk-install-local-file. + Bugfix: - Change the name of the package installer from 'Software' to 'Packages'. - Do not maximize by default as we do not have a draggable header yet. - Do not try and duplicate all the PackageKit errors in the session helper. - Do not use the deprecated gtk_icon_size_lookup_for_settings(). - Don't pass relative file-paths to the session-service. - Ignore package progress updates when the transaction is being simulated. - Mark some strings as translatable. - Never show two modal dialog boxes when using the install helpers. - Port from a homegrown EggTest to GTest. - Remove redundant calls to g_type_init. - Set the default height of the details expander. - Show a meaningful name in the about dialog. - Show the update viewer in the app overview. - Swapped "Required packages" and "Dependent packages" button functionality. - Updated the man pages to reflect reality. - Use a reasonable default window size. + Updated translations. - Drop gnome-packagekit-larger-details-pane.patch: fixed upstream. - Drop gnome-packagekit-spinner.patch: fixed upstream. - Rebase gnome-packagekit-OnlyShowIn.patch. - Add gnome-packagekit-spinner.patch: Fix gnome-packagekit 'hanging' for a long time after executing the update and consuming CPU resources (bnc#813176). - Update to version 3.8.2: + Fix the search menu. + Open Listaller packages with gpk-install-local-file. + Update the man pages to reflect reality. + Updated translations. - Update to version 3.8.1: + Show the update viewer in the app overview. + Add some translator comments. + Do not maximize by default as we do not have a draggable header yet. + Do not try and duplicate all the PackageKit errors in the session helper. + Mark strings as translatable. + Never show two modal dialog boxes when using the install helpers. + Show a meaningful name in the about dialog. + Updated translations. - Rebase gnome-packagekit-OnlyShowIn.patch. - Add org.freedesktop.PackageKit.service provides and conflict otherproviders(org.freedesktop.PackageKit.service). - Update to version 3.8.0: + Fix icon size of pk-wait 48x48 icon. + Updated translations. - Update to version 3.7.92: + Do not use GTK deprecated functions. + Don't show confirmation dialog by default. + Don't use horizontal scrollbars. + Fix alignment of dialog. + Ignore the selection-changed after clearing. + Updated translations. - Update to version 3.7.5: + New Features: - Add keywords for better discoverability. - Support notification filtering. + Bugfix: - Be more careful when dealing with windows. - Don't call gpk_dbus_task_set_xid twice. - Don't crash if the window that invoked the task exits before the task starts up. - Don't use the deprecated INCLUDES in Makefile.am. - Fix a segfault when there is a distribution upgrade available. - Use the correct titles for any encoder or decoder version. - Use the UTF-8 '?' rather than '...' in UI code. + Updated translations. - Drop gpk-Dont-crash-if-the-window-invoking-task-exits.patch, fixed upstream. - Update gnome-packagekit-OnlyShowIn.patch: change NoDisplay to false for gpk-prefs and gpk-update-viewer (bnc#803201). - Don't mangle categories of gpk-prefs: the upstream ones are just fine (showing up in Settings). - Add gpk-Dont-crash-if-the-window-invoking-task-exits.patch, Don't crash if the window that invoked the task exits before the task starts up (rh#756208). - Do not ship gpk-distro-upgrade (also not in -extras package): Neither does the zypp backend offer this capability at this moment nor do our repositories publish the needed product information. - Update to version 3.6.1: + Fix a segfault when distribution upgrades available (bgo#685579) + Updated translations. - Switch on systemd support: change with_systemd defines to 1. - Update to version 3.6.0: + Bug fixes: - Add trailing semicolon to satisfy desktop-file-validate - Fix help links + Updated translations. - Rebase gnome-packagekit-OnlyShowIn.patch. - Update to version 3.5.90: + Do not show the preferences program in the application view + Do not show the update viewer in the application overview + Don't show the clear button when installing or removing packages + Just call the install/remove program 'Software' + Make the header of gpk-application draggable + Reword the welcome message now we have no find button + Use 'Clear' for the clear packages button + Updated translations. - Rebase gnome-packagekit-OnlyShowIn.patch. - Replace gnome-doc-utils-devel BuildRequires with yelp-tools, following upstream. - Replace docbook-utils BuildRequires with docbook-utils-minimal: It's sufficient for the build and avoids pulling in an entire texlive stack. - No longer pass --disable-scrollkeeper to conigure. - Update to version 3.5.4: + Update the UI in gpk-prefs to reflect the changes in g-s-d + Remove any references to UpdateSystem + Updated translations. - Update to version 3.5.3: + Don't use the deprecated g_thread_init and raise the required glib version + Ensure the native and newest filters are synced at startup + Port away from the deprecated gdk_window_get_pointer() + Port away from the deprecated PackageKit subpercentage properties + Raise the required PackageKit version to something non-obsolete + Remove PK_MESSAGE_ENUM_UNTRUSTED_PACKAGE, it's been removed in PackageKit + Remove support for rollback, it's been removed in PackageKit + Remove support for SimulateX roles as these are no longer present in PackageKit + We're only automatically downloading updates only now, so change the label in the UI + Updated translations. - Update to version 3.5.1: + New Features: - Change the name of the package installer to be 'Install Software'. - Maximise the 'Install Software' window by default. - Move the 'Help' menu into the application menu. - Move the installer filter options into the application bar. - Move the selection items into actual buttons. - Move the 'System' menu item in the 'Software Installer' into the application menu. - Nuke the 'Find' button in gpk-application. - Remove the run button from gpk-application. - Use a prettier, smaller, info panel in gpk-application. + Bugfix: - Do not try to use the GSD schema if it has not been installed - Remove the newest metagroup -- it's just not useful. + Updated translations. - Add gnome-packagekit-displaysize.patch: Never stretch more than 90% of the screen area (bnc#730968). - Add gnome-packagekit-larger-details-pane.patch to make the details pane in the update viewer larger (bnc#730971,bgo#666635); patch came from Gary and was pushed to the upstream bug report. - Update to version 3.4.2: + Do not try to use the GSD schema if it has not been installed + Updated translations. - Update to version 3.4.0: + Bugfix: - Return with success if we try to install no packages + Updated translations. - Update to version 3.3.92: + Improved strings in the UI. + Updated translations. - Update to version 3.3.5: + New Features: - Add optional systemd support + Bugfix: - Drop an unneeded include - Ensure that non-arch packages get the correct update size set + Updated translations. - Remove xz BuildRequires now that it comes for free in the build system. - Get ready for full-switch to systemd: + Add a with_systemd macro, currently set to 0 as the systemd support implies no support for ConsoleKit, which we want to keep until sysvinit is not supported anymore. + Add pkgconfig(libsystemd-login) and pkgconfig(polkit-gobject-1) BuildRequires if we build systemd support. + Pass --enable-systemd to configure if we build systemd support. - Update to version 3.3.3: + Actually exit the GTK tools when the user closes the window + Add a friendly name for g-s-d in the log program + Don't autoclose when no updates but distro upgrades are available + Don't spin in a loop in the updater when results come quicker than we expect + Don't use the deprecated g_format_size_for_display + Don't use the deprecated gtk_hbox_new + Mark the '32-bit' and '64-bit' strings as translatable + Move the gtk-module support files to PK + New versions of GTK show image-broken when we specify an empty string + Updated translations. - Add xz BuildRequires because we can't build a package for a xz-compressed tarball without explicitly specifying that... See bnc#697467 for more details. - Change category in gpk-prefs.desktop to X-SuSE-ServiceConfiguration to avoid rpmlint warnings - Modified categories in .desktop file so that it is grouped with "System" applications in the desktop menus (bnc#714333) - Update to version 3.2.1: + Updated translations. - Update to version 3.2.0: + Bugfix: - Correctly count the list of packages in the update viewer - Ensure the full path is sent to PackageKit when installing files + Updated translations. - Update to version 3.1.92: + Never duplicate the 'Remove' tab for obsoleted software + Updated translations. - Update to version 3.1.90: + New Features: - Allow the list of package dependencies to expand horizontally - Don't make each package have a bold summary now that the package details are grey - Make the version and architecture gray in the GUI tools - Move the '7 Updates (45Mb)' text to the button box to match the mockup - Split up the updates in the update viewer into sections to match the mockup - Turn the cryptic i86_64 into a human readable string, e.g. '64-bit' + Bugfix: - Better default dialog height for the main application and the update viewer - Better default position for the package update description vpane - Better default size for the Log Viewer - Better default size in the repositories prefs dialog - Correctly use the theme colors rather than hardcoding gray - Do not allow vertical scrollbars on the package metadata - Do not show the full path when installing local files - Do not use deprecated #defines from PackageKit - Don't clear the welcome screen when starting gpk-application - Fix the update viewer's progressbar alignment - Give more space for error messages - Hide the details expander by default in the updates viewer to match the mockup - Never set a window title if the dialog has no parent - Nuke the 'Help' button in the update viewer to closer match the mockups - Rename the 'Software Updates' to 'Software Settings' to make searching clearer - Service Pack dialog: affirmative action goes to the right - Show the application name in the run listbox - Use a 'Cancel' button for a confirm dialog rather than 'Close' - Drop gnome-packagekit-gpk-prefs-desktop.patch: the name has been changed to 'Software Settings' upstream, which is good enough for us. - Update to version 3.1.3: + New Features: - Support looking up Plasma services - Pack package dependency lists into tabs + Bugfix: - Add desktop file for gpk-dbus-service - Add the new enumerated types - Add two new translated error codes - Do not set the package checkboxes to be selectable if the backend is not able to do UpdatePackages - Do not show the menu path of installed software as this makes no sense with either GNOME Shell or Unity - Don't use hardcoded paths to executables - Fix compile warnings when using the latest GTK+ - Fix some sensitivity problems with gpk-application - Make the session RemovePackageByFiles API match what we have in kpackagekit - Never auto-close the update-viewer if there are restarts to agree to - Remove the foo_DISABLE_DEPRECATED CPPFLAGS as it's hurting with the GTK+ and Glib changes - Rename to Software Install - Use a proper application name - Use GpkTask rather than PkClient while searching - Use /org/gnome as starting path for schemas + Updated translations. - Drop gnome-packagekit-gtk-3_1_6.patch: fixed upstream. - Add gnome-packagekit-gtk-3_1_6.patch: Fix build with gtk+ 3.1.6, which has gtk_[hv]box_new deprecated. Patch taken from git. - Update to version 3.0.3: + Pack the tarball with a non-broken version of libtool this time + Add the gpk-dbus-service.desktop.in file to POTFILES.in as it was missing + Never auto-close the update-viewer if there are restarts to agree to. - Remove call to autoreconf and gtk-doc BuildRequires. A working libtool is in the tarball again. - Update to version 3.0.2: + Only use the window title if the user set a parent window XID. Fixes rh#700229. + Updated translations. - Call autoreconf and add gtk-doc to BuildRequires to replace tarball libtool with the one from openSUSE. - Own /usr/share/GConf and /usr/share/GConf/gsettings directories. - Add pkgconfig(dbus-glib-1) BuildRequires. - Drop gconf2-devel, libunique-devel, sqlite-devel BuildRequires. - Drop gnome-packagekit-BNC538353.patch: this needs to be moved to gnome-settings-daemon. See bnc#689592. - Update to version 3.0.0: + Add desktop file for gpk-dbus-service + Don't use hardcoded paths to executables + Rename to Software Install + Use a proper application name + Use /org/gnome as starting path for schemas + Updated translations. - Update to version 2.91.92: + New Features: - Toggle subpackages when toggling the main package + Bugfix: - Don't show Distro Upgrade in Application view - Don't show log viewer in Application view - Don't show Service Pack Creator in application view - Ensure we show the correct icon after unticking a to-be installed item. - Remove obsolete compile time version checks + Updated translations - Changes from version 2.91.90: + New Features: - Add a nice name for the pk-command-not-found executable in gpk-log + Bugfix: - Do not show a notification icon when the notification server has persistence support. Fixes bgo#631726 - Do not use sounds in the update viewer - Honor aclocal flags (bgo#641584) - Make the warning dialog work - Remove LTSP install root setting as it has moved to gnome-settings-daemon. - Remove the gpk-update-icon process, the functionality has been moved to gnome-settings-daemon - Remove the proxy setting functionality, it's been moved into gnome-settings-daemon - Remove the update preferences from the control center - Remove useless 'FIXME' schema - Sensitize the app's 'Find' button when pasting into the GtkEntry - Changes from version 2.91.5: + Do not use the deprecated gdk_app_launch_context_new + Fix gcc uninitialized variable warning + Raise the PackageKit dep to 0.6.5 for pk_task_refresh_cache_async + Translations update - Changes from version 2.91.4: + switch to GTK3 + Updated translations + move repositories configuration into control center panel + allow to check for updates from control center panel + Port to latest GNOME3 API (libnotify 0.7 / glib logging framework, GtkComboBoxTest / GtkApplication...) + remove gpk-backend-status + Improve update settings UI + Use pk_client_set_cache_age() to optimize the amount of downloaded data + Add a simple distribution upgrade tool that uses PackageKit + Avoid multi-search in gpk-application at the same time - Drop gnome-packagekit-BNC383261.patch, gnome-packagekit-fate302445.patch: this needs to move to gnome-settings-daemon. See bnc#689592. - Drop gnome-packagekit-opensuse-libexec.patch: fixed upstream. - Add docbook-utils BuildRequires and replace gtk2-devel BuildRequires with pkgconfig(gtk+-3.0). - Replace GConf2 schemas handling with GSettings schemas handling, with %glib2_gsettings_schema_* macros. - Remove --disable-schemas-install option, which was needed for gconf only. - Remove .desktop autostart workaround in install section: there's no autostart file anymore. - Call relevant macros in %post/%postun: + %desktop_database_post/postun because the package ships at least one desktop file. + %icon_theme_cache_post/postun because the package ships themed icons. - Pass %{?no_lang_C} to %find_lang so that english documentation can be packaged with the program, and not in the lang subpackage. - Change Requires of lang subpackage to Recommends, since the english documentation is not there anymore. - Own /usr/share/gnome and /usr/share/gnome/help to fix build. - Update gnome-packagekit-opensuse-libexec.patch to the patch committed to git. - Update to version 2.32.0: + Ensure we reset the GCancellable before doing each async method + Make apply button insensitive while applying + When showing the dep dialog, allow the addition packages to scroll horizontally. Fixes rh#585554 + Updated translations. - Move gpk-log to the extras subpackage: it's not really useful by default, for users. - Make the extras subpackage require the same version of gnome-packagekit. - Update to version 2.31.92: + Add required compat defines for PackageKit < 0.6.5. Fixes fdo#30139 + Convert to using libupower-glib, rather than devkit-power-gobject + Fix an update viewer crash if the GetUpdates call produced any messages + Fix the gpk-application GetDepends and GetRequires calls + Only disable deprecated code for --enable-strict builds + Updated translations. - Change DeviceKit-power-devel BuildRequires to libupower-glib-devel. - Add gnome-packagekit-opensuse-libexec.patch to use the right path for libexecdir in openSUSE when checking if a binary is trusted. - Update to version 2.31.91: + New Features: - Show a GtkInfoBar explaining if updates have been held back and an incomplete update list is shown + Bugfix: - Fix the .desktop files - Mark "_Install Update(s)" string as translatable - Mark items in the Selection menu translatable + Updated translations. - Rebase gnome-packagekit-gpk-prefs-desktop.patch. - Update to version 2.31.6: + Nuke the '7 messages from the package manager' functionality + When the icon gets UpdatesChanged then hide until the new GetUpdate is complete as the information is likely inaccurate + Updated translations. - Changes from version 2.30.3: + Ensure we wait for the users response when an application uses InstallMimeTypes. Fixes #28323 + Fix an important bug that stopped GetUpdates from working correctly. Fixes rh#615099 + Ignore message types we do not recognize. Fixes rh#575669 + Ensure files created with gpk-service-pack do not have ';' in them + Save the package lists to the specified directory, not the system default. Fixes rh#609531 + Ensure we reset the UI to sensitive after creating the system package list + Use the correct URL in the about dialog to fix an error. Fixes rh#598261 + Only mark the find button sensitive if we have valid text _and_ are not searching. Fixes rh#602422 + Fix default value of ignored_messages key + Fix crash in gpk-dbus-service when looking for printer drivers + Updated translations. - Rebase gnome-packagekit-BNC538353.patch. - Drop gnome-packagekit-fix-default-ignored_messages.patch: fixed upstream. - Drop gnome-packagekit-crash-install-print-driver.patch: fixed upstream. - Add gnome-packagekit-gpk-prefs-desktop.patch to change the name of the "Software Update" menu entry: this makes it possible to get the translations from the po files during the build, while suse_update_desktop_file requires manual translations by openSUSE translators, which is duplicate work. - bnc#380665 - Rename one of the "Software Update" menu entries to "Software Update Preferences". - Split out an -extras package which contains GUI frontends to functionality that openSUSE provides in YaST Package Management. Have -extras Require gnome-packagekit. - Add gnome-packagekit-crash-install-print-driver.patch to fix a crash when looking for printer drivers. Fix bnc#614774. - Update to version 2.30.2: + Always show the search type menu icons. Fixes rh#530595 + Ignore other-updates-held-back messages by default + Ignore repo-metadata-download-failed messages by default + Fix up a crash where installing a file failed. Fixes rh#586414 + Fix compile with -Wshadow + Do not set the Add/Remove search to name but instead use the GConf defaults - This update fixes the search that is too strict by default, bnc#597772. - Add gnome-packagekit-fix-default-ignored_messages.patch to fix the default value of the ignored_messages key. See bgo#620524. - Update gnome-packagekit-fate302445.patch: we shouldn't look for /usr/share/applications/YaST2/suse_register.desktop to decide whether to run smolt or not. The check for /var/run/smolt_do_opensuse_run and smoltGui should be enough. Fix bnc#607132. - Update to version 2.30.1: + Ensure the session UI always shows a package name rather than a package-id + Ensure we process font requests by correctly processing the session ignore blacklist + rh#581682: Fix a crash where the desktop file that was installed has no root directory + Set the cancel button to be initially insensitive + rh#531878: Use GIO to launch the desktop file application after it is installed + Use /proc/%i/exe instead of cmdline when getting the exec of a sender + Zero the size value when the package finished signal is recieved + Updated translations. - Update to version 2.30.0: + New Features: - Allow the user to select the GPG key information to be able to verify it - Use libunique to ensure we only ever have one update icon running in the session + Bugfix: - Added and updated screenshots - Check if we got an invalid pixbuf to prevent a crash - Ensure we close the previous dialog before we show an error dialog. Fixes rh#569842 - Ensure we remove the timeout source of the auto-closing dialogs. Fixes rh#570436 - Fix the error when the user clicks the about menu item - Fix the second install in gpk-update-viewer when a backend is reporting detailed errors - Fix checking for updates every day when the user had specified 'Never'. Fixes rh#544573 - Hide the update icon when all updates are blocked - Mark a few menu items translatable - Use gtk_buildable_get_name() rather than gtk_widget_get_name() - Rebase gnome-packagekit-fate302445.patch. - Rebase gnome-packagekit-BNC383261.patch. - Update to version 2.29.91: + New Features: - Add InstallPrinterDrivers into the session API + Bugfixes: - Do not assume that we are just installing when we get the simulate request - Do not schedule a refresh-cache if one is already waiting - Do not show '0 bytes' in the confirmation dialog, just show the message title - Do not show the list of packages in the updates-available bubble. Fixes bgo#609233 - Ensure parent window is set modal when installing packages with deps using the DBus interface. Fixes rh#566741 - Fix an infinite loop in gpk_update_viewer_are_all_updates_selected() - Fixed incorrect use of g_ascii_strdown - If we failed to update the system, wait a lot longer than two seconds before we try again - Read the PkClient error code enum and try to map it to a PkErrorEnum code - Return TRUE when InstallPackageFiles succeeds - Use correct provides tag for postscriptdriver what-provides query - Add libgudev-1_0-devel BuildRequires. - Move the change of gconf schema in gnome-packagekit_release.patch to the gconf2-branding package, and rename gnome-packagekit_release.patch to gnome-packagekit-OnlyShowIn.patch. - Drop gnome-packagekit-BNC542819.patch: the logic for patch based updates should be done in PackageKit itself now. - Update to version 2.29.3: + New Features: - Remove the 'Install only security updates' button from the security updates popup and open the update viewer instead - Show transaction messages in gpk-repo - Show the size of the extra packages that need to be downloaded as deps - Filter by the timespec in gpk-log, not the localised date. Fixes rh#544667 - Show internal errors with modal dialogs, rather than just failing quietly with an error on stderr - Nest child updates in the update viewer so we don't show the same update description multiple times + Bugfix: - Fix menu entry capitalisation in gpk-application - Make the security update notification dialog timeout after 15 seconds - Ensure we detect and use x11 to fix the compile when linking with --as-needed - Actually cancel the transaction when the GpkWatch cancel button is pressed - Process every transaction finish, even if we're not watching it - Only wait 3 seconds (not 60) when we get the updates changed signal - Re-get the update list in the update viewer if the network state changes. Fixes rh#543871 - Fix two potential crashers when gpk-update-viewer has finished applying updates - Don't hide the restart status icon just because the daemon exited. Fixes rh#553966 - Fix some i18n bugs. Fixes bgo#606629 - Update to version 2.29.2: + New Features: - Ensure the gpk-update-icon service is running by activating it if somebody uses the interface. Fixes rh#548095 - Split up the DBus interface part of gpk-update-icon into an session-activated gpk-dbus-service binary + Bugfix: - Check the GpkDbusTask object only replies once to each session request - Update to version 2.29.1: + New Features: - Convert all the client applications to use packagekit-glib2 - When the update viewer is no longer being shown, force an update of the updates - Remove a lot of the helpers and create a GpkTask module that implements PkTask to handle the transaction interactions - Use a GtkInfoBar to display the mobile broadband warning, not a modal dialog box - Add RemovePackageByFile() to match the API provided by KPackageKit - Format the dates in the update viewer according to the users locale. Fixes bgo#601493 - Add a GConf key to add program exec names to ignore all DBus requests from. Fixes rh#501023 - Make the update viewer cope with multiple packages downloading at the same time - Add a new GConf key to control whether we show all packages in the add/remove UI + Bugfix: - Fix thinko in spinner cell renderer's rendering - Fix duplicate mnemonics in menu. Fixes bgo#601581 - Use the correct show-confirm key when installing a font - Some more fixes to the session interface - Don't escape the desktop summary in the run dialog. Fixes bgo#596010 - Ignore cleanup and finished packages when we a simulating a remove or install - Never show the role text in the GpkWatch tooltip - Only show 'and n other security updates when there are other updates to list. Fixes rh#527149 - Don't show 4Gb as the file size when we actually get -1, meaning percentage unknown - Use seporate messages when we've finished installing all or some of the updates - If command line contains (deleted) the original binary is invalid, and don't show it in the UI. Fixes rh#524873 - Don't show finished tasks in the menu dropdown - Run the gpk-install-foo helpers with interaction 'hide-finished,hide-warnings' as we are handling failure - Check we're not already doing GetUpdates or GetDistroUpgrades before we try to do the action - Ensure we use the progress callback to update the UI when processing session DBus requests - Use the desktop icon when we unselect the installed application in gpk-application. Fixes fdo#25098 - Rebase gnome-packagekit-fate302445.patch. - Rebase gnome-packagekit-BNC383261.patch. - Update to version 2.28.2: + Don't cache the length of the deps array if we are removing items from it + rh#530595 - Always show the search type menu icons + Remove the original package from the dep-confirmation screen + Ignore generic errors such as 'Failed' and do not show UI in this case + Only wait 3 seconds (not 60) when we get the updates changed signal + fdo#25098 - Use the desktop icon when we unselect the installed application in gpk-application + Updated translations. - Update to version 2.28.1: + Fix thinko in spinner cell renderer's render + Don't escape the desktop summary in the run dialog. Fixes bgo#596010 + Simulate removal for PackageKit >= 0.5.2 to fix removing packages + Ignore cleanup and finished packages when we a simulating remove or install + If command line contains (deleted) the original binary is invalid. Fixes rh#524873 + Never show the role text in the GpkWatch tooltip + Only show 'and n other security updates' when there are no updates to list. Fixes rh#527149 + Run the helpers with interaction 'hide-finished,hide-warnings' as we are handling failure + Don't show the the 'all updates installed' dialog if we've just shown the restart required dialog + Dont segfault if error_local is not set + Call gpk_dbus_task_install_files when installing local files + Updated translations. - Drop gnome-packagekit-BNC543595.patch: fixed upstream. - Update to version 2.28.0: + Only show installing and updating packages in the GpkHelperDepsUpdate UI + fdo#23888 - Add a --enable-small-form-factor which disables the auto-maximise code by default + Connect to the correct signal name for gnome-session idle detection + Updated translations. - Fix bnc#543595 - install local files. - Fix for bnc#542819 - update dependencies failure - Fix for bnc#538353 - Update to version 2.27.92: + New Features: - Add simulation of installed files if the backend support it + Bugfix: - Fix the help buttons - Don't show duplicate package names in the reboot tooltip - Fix a typo where the codec dialog would have no text - Fix small memory leak and possible crash in the firmware code - Fix a possible crash if X is misbehaving - Fix a possible crash in the service pack code - String fixes. - Build fixes. + Updated translations. - Changes from version 2.27.91: + New Features: - Show the notifications pointing at the status icon when possible - Watch /dev/.udev/firmware-missing for changes so we pick up hotplug requests too - Add the pk-device-rebind functionality to replug hardware + Bugfix: - Wrap license in about dialogue - Remove markup from .ui files - Add accelerator. Fixes bgo#590999 - Only return the newest packages for mime, fonts and codec helpers. Fixes rh#514879 - Only install the newest native-arch package when using the session methods. Fixes rh#509569 - Don't show a modal dialog when the user cancels the file install - Egg update to fix compile on FreeBSD - Reduce in weight X-GNOME-Autostart-Phase desktop files - Ignore hidden desktop files when we show the list of new applications - Only run the update if the dep check was successful - Don't show the auth-failure dialog in the update viewer - Show errors when using the firmware client - Add CanStop and CanRestart methods on the ConsoleKit helper - Never use a title on a modal error dialog - Check in more places if a user is able to restart - Add application/x-deb to the list of files we try to open - Improve the firmware code when multiple devices are requesting the same files - Resize the deps list in a better way. Fixes rh#517662 - Don't show a single menu item for the left click on the updates star - Only show the on-battery warning only if we would have performed the update - Don't allow double click on a help item. Fixes rh#518854 - Change the firmware 'Do not show again' to a 'Ignore devices' button + Updated translations. - Drop gnome-packagekit-XGetWindowProperty.patch: upstream has changed the code and the original issue shouldn't be there anymore. - Respin gnome-packagekit-BNC383261.patch. - Update to version 2.27.5: + New Features: - Port all the code to using PolicyKit1 rather than PolicyKit - Reduce the size displayed as the package is downloaded in the update viewer - Scroll to the package being processed in the update list. Fixes rh#510984 + Bugfix: - Don't unconditionally force on NEWEST filtering in the update viewer - Fix compile with old versions of PackageKit - Fix up few translations to include trailing full stop. Fixes fd#22745 - Don't do the update check as soon as the UpdatesChanged signal is recieved - Don't flash the gpk-repo UI when we enable or disable repos. Fixes half of rh#510730 - Check the language tags before trying to parse them. Fixes fd#22792 - Ensure we re-set the proxy when packagekitd re-appears on the bus - When doing queries automatically, don't spam them with locking failure messages. Fixes gnome#588698 - Build a private library and link that to reduce the size of the package by 300kb - Don't set the package view insensitive when doing searches, and add a delay to prevent flicker. Fixes rh#510730 - Make some of the libnotify bubbles more sane - Don't show (0) in the update viewer if there is nothing to download - Don't show the 'Update System Now' link in the update dropdown, the user should use the update viewer - Add in different translations for encode, decode and unknown. Fixes rh#497737 - Make the arch filter a single tickbox, not an option group - Don't print the package list when we have a RestartRequired of a security type - Add some missing punctuation in some of the restart strings - Reduce the size of two of the messagebox titles - Add a 'Selected packages' group in add/remove programs like kpackagekit - Use the correct icon in the panel when restarts are required - Actually make the gnome-session code work by using the correct callback signatures - We don't require DeviceKit, so don't check for it. Fixes bgo#590157 - Only return the newest packages for mime, fonts and codec helpers and to perhaps fix rh#514879 + Updated translations. - Respin gnome-packagekit-BNC383261.patch. - Respin gnome-packagekit-fate302445.patch. - Drop DeviceKit-devel and PolicyKit-gnome-devel BuildRequires. - Update to version 2.27.3: + New Features: - Add a link to gpk-log in gpk-application - Enable nice build output on automake1.11 - Enable the warning GSEAL_ENABLE and fix up build failures - Check for dependancies before downloading updates in the update viewer - Add --parent-window options to the client tools so they are set transient in gpk-application + Bugfix: - Include <locale.h> in gpk-update-viewer.c - Use gtk_show_uri instead of deprecated gnome-open - Don't use English enumerated values in GConf, instead use seconds - Check packages content-type before sending them to the daemon - Add a tooltip to the package entry box in the service pack creator - Fix a double free when we fail to find packages - Show normal updates in the update viewer severity column - Populate the manpage package names correctly - Force intltool to recognise .ui files as gettext/glade files - Set the GpkHelperRun window to be modal. Fixes rh#506010 - Connect to gnome-session to get the idle status, not gnome-screensaver - Don't show a generic icon when we have messages - Get rid of the 'Display Notification' section in the preferences pane - Don't try to update previously added deps to be installed in the update viewer - Fix mnemonic conflict in gpk-application - When the user clicks hide, do so until the session is restarted. Fixes rh#507062 - Move a few GConf keys to the correct places - Add preference to be able to see every PackageKit transaction, even if it's active - Don't ignore the user pressing escape to dismiss a GpkHelperChooser - Use small form factor mode when the window is nearly as big as the display - Don't use a large package screen on notebooks with small displays - Use the newest filter by default in the update viewer. Fixes rh#508505 - Use better wording when a package sent RequireRestart - Don't include the size column in the Status column. Fixes rh#509067 - Run all the packages after install, not just the selected package - Clear the run list when we setup a new GpkHelperRun. Fixes fd#22489 - Use a PkPackageList in gpk-appliction to store the package list - If the use has set get-updates policy to never, then ignore updates-changed events. Fixes rh#509104 - Fix up a translation string. Fixes fd#22623 - Don't connect to key press _and_ release in gpk-log. Fixes rh#509636 + Updated translations. - Add py_requires. - Do not package omf files twice. - Pass --disable-schemas-install to configure. - Update to version 2.27.2: + New Features: - Replace GpkCellRendererProgress with GpkCellRendererSpinner in the update viewer - Set a busy cursor in the update viewer when the transaction is not cancellable - Warn when we use the update viewer when on mobile broadband - Remove libsexy requirement, and raise our GTK+ dep to 2.15.0 - Raise our dep on GIO to 2.18.0 - Add a hard dep on libunique 1.0.0 - Remove the old update viewer, and rename gpk-update-viewer2 to gpk-update-viewer - Convert glade files into GtkBuilder files, and drop the libglade dep completely - Remove the legacy org.freedesktop.PackageKit session interface - Use PkClient rather than GpkClient in gpk-application - Add UI helpers for media changing - Add media change functionality into gpk-application - Remove GpkClient and move to a 99% asyncronous model of operation - Add DOAP project description + Bugfix: - Use the busy cursor when we are in a transaction, not just when we cannot cancel - Make the install button the default widget in the update viewer - Make typeahead search work in the update list - Add a silly hack until we get some metadata about animated icon sizes - Only get the distro upgrades in the update viewer if we support it - Make the tooltip past and present tense in the update viewer, and also add a downloaded icon - When we launch the update viewer manually, ensure we set the title text correctly - Allow the user to resize the gpk-log dialog. Fixes rh#493934 - Do the find callback when we paste text into the add-remove software window. Fixes rh#492160 - If we have force-login set to true, never repeat the startup check even if it fails - Don't show cancel and close in the update viewer - Preload all the common GConf keys in the update icon - Never show the checkbox for the search welcome. Fixes rh#496024 - Add a commits file taken from Nautilus, and autogenerate the ChangeLog - Denote the size column in the update viewer to belong to the status column - Set the size value to zero when we get an info update - Add a completed modal dialog at the end of a successful update, rather than just quitting - Show the package name in the repo-signature dialog. Fixes fd#21236 - Use libcanberra to do event sounds when we succeed in doing an update - Don't re-get the update list after a failed install, just undisable the checkboxes. Fixes rh#496870 - Enable autocode for compiler defines in the markdown parser. Fixes rh#497162 - Only select the package item after all the results have appeared - Add another helper to cope with deps from the update process - Don't inhibit to gnome-power-manager, use gnome-session - Use DeviceKit-power rather than gnome-power-manager to get the on-battery status - Pop up a modal dialog if any of the methods in gpk-install-foo fail. Fixes rh#500237 - Provide some #ifdef compatibility so that git master GPK can build with >= 0.4.4 PK - Export InstallCatalogs on the session bus. Fixes rh#502562 - Don't show a long list of packages in the catalog install screen, instead use a scrollable package list - Refresh the system package list if it does not exist in the service pack creation tool. Fixes rh#502589 - Remove GpkSmartIcon and use GpkStatusIcon directly - Only show the monitor icon when the task is no longer connected to the bus but running - Inhibit the icon in GpkCheckUpdate rather than having last-set policy. Fixes rh#492005 - Add a loading string when loading details in the update viewer - Fix the window icon, title, and some inconsistent text in the update viewer - Don't critically warn when we have no packages selected after install + Updated translations. - Rewrite gnome-packagekit-BNC383261.patch to apply to the new layout of 2.27.2 - Add DeviceKit-devel, DeviceKit-power-devel, libcanberra-devel, libunique-devel BuildRequires. - Remove libglade2-devel BuildRequires. - Do not explicitly specify the path to the gconf schemas in the file list, and instead use the list that was generated with the gconf macros. - Update to version 2.27.1: + New Features: - Switch gnome-packagekit to the GNOME release guidelines and version numbers - Provide tooltips for the icons in the new update viewer - Add a new menu item 'Select security updates' to the new update viewer. Fixes rh#491713 - Hide the update icon notification when the update viewer is opened - Switch the default update viewer to gpk-update-viewer2 + Bugfix: - Fix some window icons in gpk-repo - Don't set the default widget to the install button when we reconsider. Fixes rh#492645 - Don't scroll to the downloading object. - Fix the MimeType entry of gpk-install-catalog. Fixes rh#489473 - Set an icon for gpk-backend-status. Fixes fdo#20681 - Make gpk-application file list resizable, and a good default size. Fixes rh#490334 - Don't use newline as a paragraph spacer in the Markdown parser - The changelog data is markup formatted, so use the markdown parser before displaying - Don't escape markdown code sections, and enable autocode for certain special words - Make the new update viewer respond to PkControl::updates-changed and update the update list - Set an initial size of the update viewer using gpk_window_set_size_request. Fixes rh#491422 - Wrap the header text to allow the new update viewer to be made much smaller - Don't resize the main window when no updates are available, use a modal window. Fixes rh#491708 - If the new update viewer is running in a transaction when it's closed, just hide the window - Don't set the model with finished, as working round it in the CellRenderer breaks things - Allow gpk-update-icon to be run in XFCE. Fixes rh#491104 - Set the update viewer title properly when there are no updates. Fixes rh#492096 - After we've applied updates, close the UI rather than getting the new update list. Fixes rh#491710 + Updated translations. - Added support for translation-update-upstream (FATE#301344). - Update to version 0.4.5: + New Features: * Merge in a new update viewer with a very different UI + Bugfix: * Allow markup in the error dialog message * Disable the polling in GpkAnimatedIcon if the widget is disabled * Don't check for local for all the GUI tools, so we can use vncviewer * Correct some of the strings we show the user about the restart mode + Translation updates - Removed gnome-packagekit-fate303359.patch as per bnc#440498 (it was not applied anyway) - Remove BuildRequires cairo-devel and gtk-doc - Don't use autoreconf - Update to version 0.4.4: + Small improvement on PK_ROLE_ENUM_SEARCH_DETAILS + Fix compile failure with gcc-4.4.0 and old versions of glib2 + Correct the specification in that we shouldn't send the provide name encoded with the provides prefix, as this is distro specific + Don't show the filter UI when we offer applications to install + Bump the required version of PackageKit to 0.4.4 now we are turning on lots of compiler warnings + Use GTK 2.15.x new GtkEntry features to remove dep on libsexy + Fix infinite recursion when we try to format invalid markdown. Fixes rh#486334 + Provide a GConf key to allow ignoring some daemon messages + Change the update viewer UI to be 'Ignore this update' not 'Ignore this package' + When we loose network and have updates, hide the icon as we can't do the updates + Updated translations. - Remove BuildRequires: libsexy-devel. ==== gnome-settings-daemon ==== - Add gnome-settings-daemon-bring-back-updates-plugin.patch: Revert upstream commits fc22a8100fa40533fddfb4338160a20188e46c6b and e3e961c52419df5f2544b24957e71cf3a4c5ef85 to bring back the updates plugin.(bsc#991024) ==== gpg2 ==== Version update (2.1.13 -> 2.1.15) - GnuPG 2.1.15: * gpg: Remove the --tofu-db-format option and support for the split TOFU database. * gpg: Add option --sender to prepare for coming features. * gpg: Add option --input-size-hint to help progress indicators. * gpg: Extend the PROGRESS status line with the counted unit. * gpg: Avoid publishing the GnuPG version by default with --armor. * gpg: Properly ignore legacy keys in the keyring cache. * gpg: Always print fingerprint records in --with-colons mode. * gpg: Make sure that keygrips are printed for each subkey in - -with-colons mode. * gpg: New import filter "drop-sig". * gpgsm: Fix a bug in the machine-readable key listing. * gpg,gpgsm: Block signals during keyring updates to limits the effects of a Ctrl-C at the wrong time. * g13: Add command --umount and other fixes for dm-crypt. * agent: Fix regression in SIGTERM handling. * agent: Cleanup of the ssh-agent code. * agent: Allow import of overly long keys. * scd: Fix problems with card removal. * dirmngr: Remove all code for running as a system service. * tools: Make gpg-wks-client conforming to the specs. * tests: Improve the output of the new regression test tool. * tests: Distribute the standalone test runner. * tests: Run each test in a clean environment. * Spelling and grammar fixes. - fix build error, adding 0001-common-Follow-up-to-14479e2-fix-void-return-in-non-v.patch - GnuPG 2.1.14: * gpg: Removed options --print-dane-records and --print-pka-records. The new export options "export-pka" and "export-dane" can instead be used with the export command. * gpg: New options --import-filter and --export-filter. * gpg: New import options "import-show" and "import-export". * gpg: New option --no-keyring. * gpg: New command --quick-revuid. * gpg: New options -f/--recipient-file and -F/--hidden-recipient-file to directly specify encryption keys. * gpg: New option --mimemode to indicate that the content is a MIME part. Does only enable --textmode right now. * gpg: New option --rfc4880bis to allow experiments with proposed changes to the current OpenPGP specs. * gpg: Fix regression in the "fetch" sub-command of --card-edit. * gpg: Fix regression since 2.1 in option --try-all-secrets. * gpgv: Change default options for extra security. * gpgsm: No more root certificates are installed by default. * agent: "updatestartuptty" does now affect more environment variables. * scd: The option --homedir does now work with scdaemon. * scd: Support some more GEMPlus card readers. * gpgtar: Fix handling of '-' as file name. * gpgtar: New commands --create and --extract. * gpgconf: Tweak for --list-dirs to better support shell scripts. * tools: Add programs gpg-wks-client and gpg-wks-server to implement a Web Key Service. The configure option --enable-wks-tools is required to build them; they should be considered Beta software. * tests: Complete rework of the openpgp part of the test suite. The test scripts have been changed from Bourne shell scripts to Scheme programs. A customized scheme interpreter (gpgscm) is included. This change was triggered by the need to run the test suite on non-Unix platforms. * The rendering of the man pages has been improved. - drop upstream gnupg-make_--try-all-secrets_work.patch ==== gpgmepp5 ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5QGpgme5 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== gpsd ==== Version update (3.15 -> 3.16) Subpackages: gpsd-devel libQgpsmm22 libgps22 python-gpsd - Update gpsd.keyring (old key 8421F11C got superseeded by 8C6C738D) - Added "-std=gnu++98" to the compile-flags otherwise compilation will break on systems with >= gcc6 - ifdef "Requires: pps-tools-devel" since it's only available on recent os-versions - Update to version 3.16 * Test rebuilds for mid-2015 leapsecond bump. * Regression tests will run even if "python" in Python 3. * Build correctly on systems where -ltinfo is split from -lncurses. * Avoid some rare overflow conditions in PPS code. * Fix bugs in JSON sat-view parsing due to the JSON parser stuffing ints into shorts. * Various small fixes to AIS interpretation. * Prevent a memory leak in long-running gpsmon instances. * Fix Savannah bug #45270: serial driver does not work properly on pipes. * Fix Savannah bug #44648: GPSD won't build if CCFLAGS contains options that are only compatible with the cros1s-compiler. * Fix Savannah bug #45342: SConstruct generates wrong *.pc files. * Fix Savannah bug #46495: gpsd_poll may crash due to unitialized pointer (probably due to buggy FD_ISSET on host system). * Fix Savannah bug #46648: gpsd crashes and buffer overflow is reported when terminated. * Fix Savannah bug #46802: AIVDM to CSV is broken in some weird cases. * Fix Savannah bug #46804: JSON satellite view parsing is somewhat broken. ==== grantleetheme ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5GrantleeTheme5 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== grilo-plugins ==== Subpackages: grilo-plugin-tracker grilo-plugin-youtube - Conditionally disable LUA Factory on openSUSE < 13.2 (SLE and Leap 42.x). LUA 5.3 is not available and as a consequence we can't ship LUA Factory plugins. - Conditionally disabled chromaprint on openSUSE < 13.2 (SLE and Leap 42.x). GStreamer/chroma support is not available. ==== gsettings-desktop-schemas ==== Subpackages: gsettings-desktop-schemas-devel - Update to GNOME 3.20 Fate#318572 - Remove gsettings-desktop-schemas-bnc872820-wm-button-layout.patch upstreamed. ==== gtk-vnc ==== Version update (0.5.4 -> 0.6.0) Subpackages: gtk-vnc-lang libgtk-vnc-2_0-0 libgvnc-1_0-0 typelib-1_0-GVnc-1_0 typelib-1_0-GtkVnc-2_0 - Update to version 0.6.0: + Important changes: - Default to build with GTK-3, use --with-gtk=2.0 to override. + New features: - Add --with-tls-priority configure flag to set default TLS priority string. - Add a 'vnc-error' signal to report reason for disconnect. - Add support for fallback to GNUTLS system trust DB. + Bug fixes: - Fix crash on Windows with GTK3 checking realized state. - Fix XKB detection of keyboard mapping with Xwayland. - Switch back to XKB detection for Xwayland. - Remove duplicate cert expiry check. - Avoid misc compile warnings. - Add missing API docs + GObject introspection annotations. - Add missing GIO dep on gvnc library GObject introspection build. - Remove unused code. - Fix redraw on Win10. - Drop support for gnutls < 2.2.0. - Fix path to h2def script. - Update compiler warning detection to fix clang build. - Ignore cast align warnings to fix clang build. - Fix endianess inversion when setting pixel format. ==== gwenview5 ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== icewm ==== Subpackages: icewm-config-upstream icewm-default icewm-lite - Add patch icewm-exit-fork.patch to avoid deadlock (bsc#977233) - Modify: icewm-preferences.patch bnc#977233 modify the command to correct one. ==== incidenceeditor ==== Version update (16.04.3 -> 16.08.0) - Build only on architectures supported by libqt5-qtwebengine - Update rpm group classification - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== java-1_5_0-gcj-compat ==== Subpackages: java-1_5_0-gcj-compat-devel - Add correct alternatives listing bnc#994284 ==== juk ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kaccounts-integration ==== Version update (16.04.3 -> 16.08.0) Subpackages: libkaccounts1 - Add libkaccounts1 to baselibs.conf. Without libkaccounts1-32bit, neither kaccounts-integration-32bit nor purpose-32bit are installible. - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kaccounts-providers ==== Version update (16.04.3 -> 16.08.0) - Adjust filelist for the plasmoid appdata, installed with KF > 5.25.0 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kactivities-stats ==== Version update (5.24.0 -> 5.25.0) - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kactivities5 ==== Version update (5.24.0 -> 5.25.0) Subpackages: kactivities5-devel kactivities5-imports libKF5Activities5 - Update to 5.25.0 * Qt >= 5.5 is now required * [KActivities-CLI] commands for starting and stopping an activity * [KActivities-CLI] setting and getting activity name, icon and description * Added a CLI application for controlling activities * Adding scripts to switch to previous and next activities * Method for inserting into QFlatSet now returns index along with the iterator (kde#365610) * Adding ZSH functions for stopping and deleting non-current activities * Added isCurrent property to KActivities::Info * Using constant iterators when searching for activity * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kactivitymanagerd ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kalarmcal ==== Version update (16.04.3 -> 16.08.0) - Remove unnecessary build requirements - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kalgebra ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kalzium ==== Version update (16.04.3 -> 16.08.0) - Remove unnecessary Requires: libkdeedu4-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kamera ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kanagram ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kapptemplate ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== karchive ==== Version update (5.24.0 -> 5.25.0) Subpackages: karchive-devel libKF5Archive5 - Update to 5.25.0 * Qt >= 5.5 is now required * Handle multiple gzip streams (kde#232843) * Assume a directory is a directory, even if the permission bit is set wrong (kde#364071) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kate ==== Version update (16.04.3 -> 16.08.0) Subpackages: kate-plugins kwrite - Adjust filelist for the plasmoid appdata, installed with KF > 5.25.0 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== katomic ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kauth ==== Version update (5.24.0 -> 5.25.0) Subpackages: kauth-devel libKF5Auth5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kblackbox ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kblocks ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kbookmarks ==== Version update (5.24.0 -> 5.25.0) Subpackages: kbookmarks-devel libKF5Bookmarks5 - Update to 5.25.0 * Qt >= 5.5 is now required * KBookmarkGroup::moveBookmark: fix return value when item is already at the right position * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kbounce ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kbreakout ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kbruch ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kcachegrind ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kcalc ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kcalcore ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kcalutils ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5CalendarUtils5 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kcharselect ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kcm_sddm ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kcmutils ==== Version update (5.24.0 -> 5.25.0) Subpackages: kcmutils-devel libKF5KCMUtils5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kcodecs ==== Version update (5.24.0 -> 5.25.0) Subpackages: kcodecs-devel libKF5Codecs5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kcolorchooser ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kcompletion ==== Version update (5.24.0 -> 5.25.0) Subpackages: kcompletion-devel libKF5Completion5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kconfig ==== Version update (5.24.0 -> 5.25.0) Subpackages: kconf_update5 kconfig-devel libKF5ConfigCore5 libKF5ConfigGui5 - Update to 5.25.0 * Qt >= 5.5 is now required * Add DeleteFile and RenameFile standard shortcut * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kconfigwidgets ==== Version update (5.24.0 -> 5.25.0) Subpackages: kconfigwidgets-devel libKF5ConfigWidgets5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kcontacts ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kcoreaddons ==== Version update (5.24.0 -> 5.25.0) Subpackages: kcoreaddons-devel libKF5CoreAddons5 - Update to 5.25.0 * Qt >= 5.5 is now required * Install known licenses and find them at runtime (regression fix) (kde#353939) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kcrash ==== Version update (5.24.0 -> 5.25.0) Subpackages: kcrash-devel libKF5Crash5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kcron ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdbusaddons ==== Version update (5.24.0 -> 5.25.0) Subpackages: kdbusaddons-devel kdbusaddons-tools libKF5DBusAddons5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kde-cli-tools5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kde-gtk-config5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kde-l10n ==== Version update (16.04.3 -> 16.08.0) Subpackages: kde-l10n-cs kde-l10n-da kde-l10n-da-data kde-l10n-da-doc kde-l10n-de kde-l10n-de-data kde-l10n-de-doc kde-l10n-el kde-l10n-en_GB kde-l10n-en_GB-data kde-l10n-en_GB-doc kde-l10n-es kde-l10n-es-data kde-l10n-es-doc kde-l10n-fr kde-l10n-fr-data kde-l10n-hu kde-l10n-it kde-l10n-it-data kde-l10n-it-doc kde-l10n-ja kde-l10n-pl kde-l10n-pl-data kde-l10n-pt kde-l10n-pt_BR kde-l10n-pt_BR-data kde-l10n-ru kde-l10n-ru-data kde-l10n-zh_CN kde-l10n-zh_TW - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kde-print-manager ==== Version update (16.04.3 -> 16.08.0) - Adjust filelist for the plasmoid appdata, installed with KF >= 5.25.0 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kde-user-manager ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kdebase4 ==== Version update (16.04.3 -> 16.08.0) Subpackages: kdebase4-libkonq kdebase4-nsplugin kdepasswd kdialog keditbookmarks konqueror konqueror-plugins libkonq-devel libkonq5 - Disable build of the KDE4 folderview applet by setting the cmake option BUILD_plasma=OFF instead of removing the files after it has been built - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php - Drop the buildrequires on baloo and libbaloowidgets. This will not work with the Baloo5 based db. ==== kdebase4-runtime ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdeclarative ==== Version update (5.24.0 -> 5.25.0) Subpackages: kdeclarative-components kdeclarative-devel libKF5CalendarEvents5 libKF5Declarative5 libKF5QuickAddons5 - Update to 5.25.0 * Qt >= 5.5 is now required * Actually emit valueChanged * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kded ==== Version update (5.24.0 -> 5.25.0) Subpackages: kded-devel - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kdeedu-data ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdelibs4 ==== Version update (4.14.22 -> 4.14.23) Subpackages: kdelibs4-core kdelibs4-doc libkde4 libkde4-devel libkdecore4 libkdecore4-devel libksuseinstall1 - Update to 4.14.23 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Add upstream patch KDE_HAVE_GCC_VISIBILITY-fix.patch to fix the value so that GCC6 is taken into account - get rid of opensuse_bs macro ==== kdelibs4support ==== Version update (5.24.0 -> 5.25.0) Subpackages: kdelibs4support-devel libKF5KDELibs4Support5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kdenetwork4-filesharing ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdepim ==== Version update (16.04.3 -> 16.08.0) Subpackages: akonadi_resources akregator5 kaddressbook5 kalarm5 kmail5 knotes5 kontact5 korganizer5 - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdepim-addons ==== Version update (16.04.3 -> 16.08.0) - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdepim-apps-libs ==== Version update (16.04.3 -> 16.08.0) - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdepim-runtime ==== Version update (16.04.3 -> 16.08.0) - Provide/Obsolete kio-pimlibs - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdesdk4-scripts ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdesignerplugin ==== Version update (5.24.0 -> 5.25.0) Subpackages: kdesignerplugin-devel kdesignerplugin-lang - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kdesu ==== Version update (5.24.0 -> 5.25.0) Subpackages: kdesu-devel libKF5Su5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kdewebdev4 ==== Version update (16.04.3 -> 16.08.0) Subpackages: kfilereplace kimagemapeditor klinkstatus - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdewebkit ==== Version update (5.24.0 -> 5.25.0) Subpackages: kdewebkit-devel libKF5WebKit5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kdf ==== Version update (16.04.3 -> 16.08.0) Subpackages: kwikdisk - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdgantt2 ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5KDGantt2-5 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdiamond ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdnssd ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kdnssd-framework ==== Version update (5.24.0 -> 5.25.0) Subpackages: kdnssd-framework-devel libKF5DNSSD5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kdoctools ==== Version update (5.24.0 -> 5.25.0) Subpackages: kdoctools-devel kdoctools-lang - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kemoticons ==== Version update (5.24.0 -> 5.25.0) Subpackages: kemoticons-devel libKF5Emoticons5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kf5-filesystem ==== Version update (20160420 -> 20160807) - Own %_kf5_appstreamdir - Use metainfo for %_kf5_appstreamdir on Leap >= 42.2 - Use appdata dir for %_kf5_appstreamdir on older oS releases ==== kfilemetadata5 ==== Version update (5.24.0 -> 5.25.0) Subpackages: kfilemetadata5-devel - Update to 5.25.0 * Qt >= 5.5 is now required * Check for xattr during config step, otherwise the build might fail (if xattr.h is missing) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kgamma5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kgeography ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kget ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kglobalaccel ==== Version update (5.24.0 -> 5.25.0) Subpackages: kglobalaccel-devel kglobalaccel5 libKF5GlobalAccel5 libKF5GlobalAccelPrivate5 - Make sure the right subpackage calls ldconfig - Update to 5.25.0 * Qt >= 5.5 is now required * Use klauncher dbus instead of KRun (kde#366415) * Launch jumplist actions via KGlobalAccel * KGlobalAccel: Fix deadlock on exit under Windows * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kgoldrunner ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kgpg ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kguiaddons ==== Version update (5.24.0 -> 5.25.0) Subpackages: kguiaddons-devel libKF5GuiAddons5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== khangman ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kholidays ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== khotkeys5 ==== Version update (5.7.3 -> 5.7.4) Subpackages: khotkeys5-devel - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== khtml ==== Version update (5.24.0 -> 5.25.0) Subpackages: khtml-devel libKF5KHtml5 - Update to 5.25.0 * Qt >= 5.5 is now required * Support percentage unit in border radius * Removed prefixed version of background and border radius properties * Fixes in 4-values shorthand constructor function * Create string objects only if they will be used * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== ki18n ==== Version update (5.24.0 -> 5.25.0) Subpackages: ki18n-devel libKF5I18n5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kiconthemes ==== Version update (5.24.0 -> 5.25.0) Subpackages: kiconthemes-devel libKF5IconThemes5 - Update to 5.25.0 * Qt >= 5.5 is now required * Greatly improve the performance of makeCacheKey, as it is a critical code path in icon lookup * KIconLoader: reduce number of lookups when doing fallbacks * KIconLoader: massive speed improvement for loading unavailable icons * Do not clear search line when switching category * KIconEngine: Fix QIcon::hasThemeIcon always returning true (kde#365130) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php - Drop upstreamed 0001-KIconEngine-Fix-QIcon-hasThemeIcon-always-returning-.patch ==== kidentitymanagement ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kidletime ==== Version update (5.24.0 -> 5.25.0) Subpackages: kidletime-devel libKF5IdleTime5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kig ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kimageformats ==== Version update (5.24.0 -> 5.25.0) - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kimap ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kinfocenter5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kinit ==== Version update (5.24.0 -> 5.25.0) Subpackages: kinit-devel - Update to 5.25.0 * Qt >= 5.5 is now required * Adapt KInit to Mac OS X * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kio ==== Version update (5.24.0 -> 5.25.0) Subpackages: kio-core kio-devel - Remove workaround to install "Create New" templates as actual files, the issues with using the embedded resource are fixed in 5.25.0 - Update to 5.25.0 * Qt >= 5.5 is now required * Fix KIO::linkAs() to work as advertised, i.e. fail if dest already exists * Fix KIO::put("file:///path") to respect the umask (kde#359581) * Fix KIO::pasteActionText for null dest item and for empty URL * Add support for undoing symlink creation * GUI option to configure global MarkPartial for KIO slaves * Fix MaxCacheSize limited to 99 KiB * Add clipboard buttons to checksums tab * KNewFileMenu: fix copying template file from embedded resource (kde#359581) * KNewFileMenu: Fix creating link to application (kde#363673) * KNewFileMenu: Fix suggestion of new filename when file already exist in desktop * KNewFileMenu: ensure fileCreated() is emitted for app desktop files too * KNewFileMenu: fix creating symlinks with a relative target * KPropertiesDialog: simplify button box usage, fix behavior on Esc * KProtocolInfo: refill cache to find newly installed protocols * KIO::CopyJob: port to qCDebug (with its own area, since this can be quite verbose) * KPropertiesDialog: add Checksums tab * Clean url's path before initializing KUrlNavigator * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kio-extras5 ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kio_audiocd ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kiriki ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kitemmodels ==== Version update (5.24.0 -> 5.25.0) Subpackages: kitemmodels-devel libKF5ItemModels5 - Update to 5.25.0 * Qt >= 5.5 is now required * KRearrangeColumnsProxyModel: fix assert in index(0, 0) on empty model * Fix KDescendantsProxyModel::setSourceModel() not clearing internal caches * KRecursiveFilterProxyModel: fix QSFPM corruption due to filtering out rowsRemoved signal (kde#349789) * KExtraColumnsProxyModel: implement hasChildren() * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kitemviews ==== Version update (5.24.0 -> 5.25.0) Subpackages: kitemviews-devel libKF5ItemViews5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kiten ==== Version update (16.04.3 -> 16.08.0) Subpackages: fonts-KanjiStrokeOrders - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kjobwidgets ==== Version update (5.24.0 -> 5.25.0) Subpackages: kjobwidgets-devel libKF5JobWidgets5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kjs ==== Version update (5.24.0 -> 5.25.0) Subpackages: kjs-devel libKF5JS5 libKF5JSApi5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kjsembed ==== Version update (5.24.0 -> 5.25.0) Subpackages: kjsembed-devel libKF5JsEmbed5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kjumpingcube ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kldap ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kleopatra5 ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== klettres ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kmag ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kmahjongg ==== Version update (16.04.3 -> 16.08.0) - Update/cleanup build requirements - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kmailtransport ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kmbox ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kmediaplayer ==== Version update (5.24.0 -> 5.25.0) Subpackages: kmediaplayer-devel libKF5MediaPlayer5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kmenuedit5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kmime ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kmines ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kmousetool ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kmouth ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kmplot ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== knavalbattle ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== knetwalk ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== knewstuff ==== Version update (5.24.0 -> 5.25.0) Subpackages: knewstuff-devel libKF5NewStuff5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== knotifications ==== Version update (5.24.0 -> 5.25.0) Subpackages: knotifications-devel libKF5Notifications5 - Update to 5.25.0 * Qt >= 5.5 is now required * Don't set parent of sublayout manually, silences warning * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== knotifyconfig ==== Version update (5.24.0 -> 5.25.0) Subpackages: knotifyconfig-devel libKF5NotifyConfig5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kolf ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kollision ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kolourpaint ==== Version update (16.04.3 -> 16.08.0) - Do not recommend ksaneplugin any more, the KF5 version does not use it (it hasn't been ported to KF5 anyway) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kompare ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== konquest ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== konsole ==== Version update (16.04.3 -> 16.08.0) Subpackages: konsole-part - Add fix-extra-window-when-restored-by-session-management.patch to prevent creating an extra window upon session restoration (kde#367447) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php - Drop upstreamed patch Write-profile-changes-to-Konsoles-location.patch ==== kontactinterface ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kopete ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kpackage ==== Version update (5.24.0 -> 5.25.0) Subpackages: kpackage-devel - Update to 5.25.0 * Qt >= 5.5 is now required * Infer the ParentApp from the PackageStructure plugin * Let kpackagetool5 generate appstream information for kpackage components * Make it possible to load metadata.json file from kpackagetool5 * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kparts ==== Version update (5.24.0 -> 5.25.0) Subpackages: kparts-devel libKF5Parts5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kpat ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kpeople5 ==== Version update (5.24.0 -> 5.25.0) Subpackages: kpeople5-devel - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kpimtextedit ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kplotting ==== Version update (5.24.0 -> 5.25.0) Subpackages: kplotting-devel libKF5Plotting5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kppp ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kpty ==== Version update (5.24.0 -> 5.25.0) Subpackages: kpty-devel libKF5Pty5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kqtquickcharts ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== krdc ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kremotecontrol ==== Version update (16.04.3 -> 16.08.0) Subpackages: liblibkremotecontrol1 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kreversi ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== krfb ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kross ==== Version update (5.24.0 -> 5.25.0) Subpackages: kross-devel - Update to 5.25.0 * Qt >= 5.5 is now required * Remove unused KF5 dependencies * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kruler ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== krunner ==== Version update (5.24.0 -> 5.25.0) Subpackages: krunner-devel libKF5Runner5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kscd ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.04.3 * KDE Applications 16.04.3 * https://www.kde.org/announcements/announce-applications-16.04.3.php ==== kscreen5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kscreenlocker ==== Version update (5.7.3 -> 5.7.4) Subpackages: libKScreenLocker5 - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kservice ==== Version update (5.24.0 -> 5.25.0) Subpackages: kservice-devel - Update to 5.25.0 * Qt >= 5.5 is now required * applications.menu: remove references to unused categories * Always update the Trader parser from yacc/lex sources * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kshisen ==== Version update (16.04.3 -> 16.08.0) - Cleanup build requirements - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ksirk ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kspaceduel ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ksquares ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ksshaskpass5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== ksudoku ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ksysguard5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== ksystemlog ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kteatime ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktexteditor ==== Version update (5.24.0 -> 5.25.0) Subpackages: ktexteditor-devel - Update to 5.25.0 * Qt >= 5.5 is now required * Do not ask for overwriting a file twice with native dialogs * Added FASTQ syntax * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== ktextwidgets ==== Version update (5.24.0 -> 5.25.0) Subpackages: ktextwidgets-devel libKF5TextWidgets5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== ktimer ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktnef ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktouch ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-accounts-kcm ==== Version update (16.04.3 -> 16.08.0) Subpackages: libktpaccountskcminternal9 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-approver ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-auth-handler ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-common-internals ==== Version update (16.04.3 -> 16.08.0) Subpackages: ktp-icons - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-contact-list ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-contact-runner ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-desktop-applets ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-filetransfer-handler ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-kded-module ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-send-file ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== ktp-text-ui ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Don't use -a when copying the icon, it may be a symlink to breeze-dark which would break if breeze5-icons is not installed - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php - Drop patch fix_desktop.diff. The right icon is in the breeze theme, so we just need to copy it to the right place ==== ktuberling ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kturtle ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kubrick ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kunitconversion ==== Version update (5.24.0 -> 5.25.0) Subpackages: kunitconversion-devel libKF5UnitConversion5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kwallet ==== Version update (5.24.0 -> 5.25.0) Subpackages: kwallet-devel kwallet-tools kwalletd5 libKF5Wallet5 libkwalletbackend5-5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kwalletmanager5 ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kwayland ==== Version update (5.24.0 -> 5.25.0) Subpackages: kwayland-devel - Rebase fix-wayland-1.3-dependency.diff - Update to 5.25.0 * Qt >= 5.5 is now required * [client] Use a QPointer for the enteredSurface in Pointer * Expose Geometry in PlasmaWindowModel * Add a geometry event to PlasmaWindow * [src/server] Verify that surface has a resource before sending pointer enter * Add support for xdg-shell * [server] Properly send a selection clear prior to keyboard focus enter * [server] Handle no XDG_RUNTIME_DIR situation more gracefully * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kwidgetsaddons ==== Version update (5.24.0 -> 5.25.0) Subpackages: kwidgetsaddons-devel libKF5WidgetsAddons5 - Update to 5.25.0 * Qt >= 5.5 is now required * [KCharSelect] Fix crash when searching with no present data file (kde#300521) * [KCharSelect] Handle characters outside BMP (kde#142625) * [KCharSelect] Update kcharselect-data to Unicode 9.0.0 (kde#336360) * KCollapsibleGroupBox: Stop animation in destructor if still running * Update to Breeze palette (sync from KColorScheme) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kwin5 ==== Version update (5.7.3 -> 5.7.4) Subpackages: kwin5-devel - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== kwindowsystem ==== Version update (5.24.0 -> 5.25.0) Subpackages: kwindowsystem-devel libKF5WindowSystem5 - Update to 5.25.0 * Qt >= 5.5 is now required * [xcb] Ensure the compositingChanged signal is emitted if NETEventFilter is recreated (kde#362531) * Add a convenience API to query the windowing system/platform used by Qt * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php - Drop upstreamed compositingchanged.patch ==== kwordquiz ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== kxmlgui ==== Version update (5.24.0 -> 5.25.0) Subpackages: kxmlgui-devel libKF5XmlGui5 - Update to 5.25.0 * Qt >= 5.5 is now required * Fix minimum size hint (cut-off text) (kde#312667) * [KToggleToolBarAction] Honor action/options_show_toolbar restriction * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== kxmlrpcclient5 ==== Version update (5.24.0 -> 5.25.0) Subpackages: kxmlrpcclient5-devel libKF5XmlRpcClient5 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== libKF5ModemManagerQt ==== Version update (5.24.0 -> 5.25.0) Subpackages: libKF5ModemManagerQt-devel libKF5ModemManagerQt6 - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== libKF5NetworkManagerQt ==== Version update (5.24.0 -> 5.25.0) Subpackages: libKF5NetworkManagerQt-devel libKF5NetworkManagerQt6 - Update to 5.25.0 * Qt >= 5.5 is now required * Default to WPA2-PSK and WPA2-EAP when getting security type from connection settings * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php - Raise NM BuildRequires to 0.9.10.0 so it matches reality ==== libcroco ==== - Update to GNOME 3.20 Fate#318572 ==== libgcrypt ==== Version update (1.6.6 -> 1.7.3) Subpackages: libgcrypt-devel libgcrypt20 libgcrypt20-32bit - libgcrypt 1.7.3: * security issue already fixes with 1.6.6 * Fix building of some asm modules with older compilers and CPUs. * ARMv8/AArch32 improvements for AES, GCM, SHA-256, and SHA-1. - includes changes from libgcrypt 1.7.2: * Bug fixes: - Fix setting of the ECC cofactor if parameters are specified. - Fix memory leak in the ECC code. - Remove debug message about unsupported getrandom syscall. - Fix build problems related to AVX use. - Fix bus errors on ARM for Poly1305, ChaCha20, AES, and SHA-512. * Internal changes: - Improved fatal error message for wrong use of gcry_md_read. - Disallow symmetric encryption/decryption if key is not set. - includes changes from 1.7.1: * Bug fixes: - Fix ecc_verify for cofactor support. - Fix portability bug when using gcc with Solaris 9 SPARC. - Build fix for OpenBSD/amd64 - Add OIDs to the Serpent ciphers. * Internal changes: - Use getrandom system call on Linux if available. - Blinding is now also used for RSA signature creation. - Changed names of debug envvars - includes changes from 1.7.0: * New algorithms and modes: - SHA3-224, SHA3-256, SHA3-384, SHA3-512, and MD2 hash algorithms. - SHAKE128 and SHAKE256 extendable-output hash algorithms. - ChaCha20 stream cipher. - Poly1305 message authentication algorithm - ChaCha20-Poly1305 Authenticated Encryption with Associated Data mode. - OCB mode. - HMAC-MD2 for use by legacy applications. * New curves for ECC: - Curve25519. - sec256k1. - GOST R 34.10-2001 and GOST R 34.10-2012. * Performance: - Improved performance of KDF functions. - Assembler optimized implementations of Blowfish and Serpent on ARM. - Assembler optimized implementation of 3DES on x86. - Improved AES using the SSSE3 based vector permutation method by Mike Hamburg. - AVX/BMI is used for SHA-1 and SHA-256 on x86. This is for SHA-1 about 20% faster than SSSE3 and more than 100% faster than the generic C implementation. - 40% speedup for SHA-512 and 72% for SHA-1 on ARM Cortex-A8. - 60-90% speedup for Whirlpool on x86. - 300% speedup for RIPE MD-160. - Up to 11 times speedup for CRC functions on x86. * Other features: - Improved ECDSA and FIPS 186-4 compliance. - Support for Montgomery curves. - gcry_cipher_set_sbox to tweak S-boxes of the gost28147 cipher algorithm. - gcry_mpi_ec_sub to subtract two points on a curve. - gcry_mpi_ec_decode_point to decode an MPI into a point object. - Emulation for broken Whirlpool code prior to 1.6.0. [from 1.6.1] - Flag "pkcs1-raw" to enable PCKS#1 padding with a user supplied hash part. - Parameter "saltlen" to set a non-default salt length for RSA PSS. - A SP800-90A conforming DRNG replaces the former X9.31 alternative random number generator. - Map deprecated RSA algo number to the RSA algo number for better backward compatibility. [from 1.6.2] - Use ciphertext blinding for Elgamal decryption [CVE-2014-3591]. See http://www.cs.tau.ac.il/~tromer/radioexp/ for details. [from 1.6.3] - Fixed data-dependent timing variations in modular exponentiation [related to CVE-2015-0837, Last-Level Cache Side-Channel Attacks are Practical]. [from 1.6.3] - Flag "no-keytest" for ECC key generation. Due to a bug in the parser that flag will also be accepted but ignored by older version of Libgcrypt. [from 1.6.4] - Speed up the random number generator by requiring less extra seeding. [from 1.6.4] - Always verify a created RSA signature to avoid private key leaks due to hardware failures. [from 1.6.4] - Mitigate side-channel attack on ECDH with Weierstrass curves [CVE-2015-7511]. See http://www.cs.tau.ac.IL/~tromer/ecdh/ for details. [from 1.6.5] * Internal changes: - Moved locking out to libgpg-error. - Support of the SYSROOT envvar in the build system. - Refactor some code. - The availability of a 64 bit integer type is now mandatory. * Bug fixes: - Fixed message digest lookup by OID (regression in 1.6.0). - Fixed a build problem on NetBSD - Fixed some asm build problems and feature detection bugs. * Interface changes relative to the 1.6.0 release: gcry_cipher_final NEW macro. GCRY_CIPHER_MODE_CFB8 NEW constant. GCRY_CIPHER_MODE_OCB NEW. GCRY_CIPHER_MODE_POLY1305 NEW. gcry_cipher_set_sbox NEW macro. gcry_mac_get_algo NEW. GCRY_MAC_HMAC_MD2 NEW. GCRY_MAC_HMAC_SHA3_224 NEW. GCRY_MAC_HMAC_SHA3_256 NEW. GCRY_MAC_HMAC_SHA3_384 NEW. GCRY_MAC_HMAC_SHA3_512 NEW. GCRY_MAC_POLY1305 NEW. GCRY_MAC_POLY1305_AES NEW. GCRY_MAC_POLY1305_CAMELLIA NEW. GCRY_MAC_POLY1305_SEED NEW. GCRY_MAC_POLY1305_SERPENT NEW. GCRY_MAC_POLY1305_TWOFISH NEW. gcry_md_extract NEW. GCRY_MD_FLAG_BUGEMU1 NEW [from 1.6.1]. GCRY_MD_GOSTR3411_CP NEW. GCRY_MD_SHA3_224 NEW. GCRY_MD_SHA3_256 NEW. GCRY_MD_SHA3_384 NEW. GCRY_MD_SHA3_512 NEW. GCRY_MD_SHAKE128 NEW. GCRY_MD_SHAKE256 NEW. gcry_mpi_ec_decode_point NEW. gcry_mpi_ec_sub NEW. GCRY_PK_EDDSA NEW constant. GCRYCTL_GET_TAGLEN NEW. GCRYCTL_SET_SBOX NEW. GCRYCTL_SET_TAGLEN NEW. - Apply libgcrypt-1.6.3-aliasing.patch only on big-endian architectures - update drbg_test.patch and install cavs testing directory again - As DRBG is upstream, drop pateches: v9-0001-SP800-90A-Deterministic-Random-Bit-Generator.patch 0002-Compile-DRBG.patch 0003-Function-definitions-of-interfaces-for-random.c.patch 0004-Invoke-DRBG-from-common-libgcrypt-RNG-code.patch 0005-Function-definitions-for-gcry_control-callbacks.patch 0006-DRBG-specific-gcry_control-requests.patch v9-0007-User-interface-to-DRBG.patch libgcrypt-fix-rng.patch - drop obsolete: libgcrypt-fips-dsa.patch libgcrypt-fips_ecdsa.patch ==== libgit2-glib ==== Version update (0.24.0 -> 0.24.3) - Update to version 0.24.3: + Reduce memory allocations during diff generation. + Fix ctime in index entry. - Update to version 0.24.2: + Fix several crashes. + Misc bugfixing. ==== libgravatar ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5Gravatar5 - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libgsf ==== Version update (1.14.39 -> 1.14.40) Subpackages: gsf-office-thumbnailer libgsf-1-114 libgsf-devel typelib-1_0-Gsf-1 - Updated to version 1.14.40: + Avoid gnome-common dependency. - Conditionally apply translations-update-upstream BuildRequires and macro for non-openSUSE only. ==== libgweather ==== Version update (3.20.2 -> 3.20.3) Subpackages: libgweather-3-6 libgweather-data libgweather-devel typelib-1_0-GWeather-3_0 - Update to version 3.20.3: + NOAA shut down their METAR provider service, so libgweather switched to a different provider (bgo#770321). + Updates translations. - Drop libgweather-change-service-provider.patch: Fixed upstream. - Add libgweather-change-service-provider.patch: The existing weather service provider was expired, replace by a working provider instead; patch taken from upstream bug report (bgo#770321). ==== libkcddb4 ==== Version update (16.04.3 -> 16.08.0) Subpackages: libkcddb4-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkcompactdisc4 ==== Version update (16.04.3 -> 16.08.0) Subpackages: libkcompactdisc4-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkdcraw ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5KDcraw5 libkdcraw-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkdecoration2 ==== Version update (5.7.3 -> 5.7.4) Subpackages: libkdecoration2-devel libkdecorations2-5 libkdecorations2private5 - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== libkdegames ==== Version update (16.04.3 -> 16.08.0) Subpackages: kdegames-carddecks-default libkdegames-devel libkf5kdegames6 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkdepim ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5Libkdepim5 - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkeduvocdocument ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkexiv2 ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5KExiv2-15_0_0 libkexiv2-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkface ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5KFace10_0_0 libkface-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkgeomap ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5KGeoMap10_0_0 libkgeomap-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update build requirements and add necessary requires to the devel package - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkipi ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5Kipi31_0_0 libkipi-data libkipi-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkleo ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5Libkleo5 - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkmahjongg ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5KMahjongglib5 libkmahjongg-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkomparediff2 ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libksane ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5Sane5 libksane-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libkscreen2 ==== Version update (5.7.3 -> 5.7.4) Subpackages: libKF5Screen7 libkscreen2-devel libkscreen2-plugin - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== libksieve ==== Version update (16.04.3 -> 16.08.0) - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== libksysguard5 ==== Version update (5.7.3 -> 5.7.4) Subpackages: libksysguard5-devel libksysguard5-helper - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== libqca2 ==== Subpackages: libqca2-devel - Add new plugin-gcrypt subpackage ==== libvirt ==== Version update (2.0.0 -> 2.1.0) Subpackages: libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-config-nwfilter libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-uml libvirt-daemon-driver-vbox libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen - libxl: allow vendor/product addressing for USB hostdevs virHostdevFindUSBDevice-privsyms.patch, libxl-usb-vendor.patch bsc#989646 - qemu: fix auth for rbd network disks d53d4650-qemu-rbd-auth.patch bsc#988998 - Replace cpumodel-vendor-crash-fix.patch with upstream variant 541e9ae6-cpu-vendor-crash-fix.patch bsc#992425 - Update to libvirt 2.1.0 - New subpackages libvirt-libs and libvirt-admin - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Dropped patches: c8f08e48-systemd-notify-fix.patch - qemu: fix qemu.conf security_driver regression in 2.1.0 release 856965b3-qemu-secdriver.patch ==== libvirt-python ==== Version update (2.0.0 -> 2.1.0) - Update to 2.1.0 - Add all new APIs and constants in libvirt 2.1.0 ==== lokalize ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== lskat ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== lsof ==== - add lsof_4.89-nfs_hanging.patch to prevent 'lsof -b' from hanging when NFS server is unavailable [bsc#995061] ==== mailcommon ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5MailCommon5 - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== mailimporter ==== Version update (16.04.3 -> 16.08.0) - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== marble ==== Version update (16.04.3 -> 16.08.0) Subpackages: libastro1 marble-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== messagelib ==== Version update (16.04.3 -> 16.08.0) - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== milou5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php - Add use-iconName.patch to use iconName instead of icon if set, that's preferred since KDE Frameworks 5.24 because having each runner set (and lookup) an icon for the results can lead to threading issues (boo#994983) - Adjust filelist for the plasmoid appdata, installed with KF > 5.25.0 ==== mlocate ==== Subpackages: mlocate-lang - Reduce dependencies a bit - Update updatedb.conf wrt bnc#994663 ==== mobipocket ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== mozc ==== Subpackages: fcitx-mozc ibus-mozc ibus-mozc-candidate-window mozc-gui-tools - Disable fcitx on SLE again. ==== nss_ldap ==== Subpackages: nss_ldap-32bit - Relabel patches: nss_ldap.dif -> 0000-nss_ldap.dif group-utf8.dif -> 0001-group-utf8.dif nss_ldap-ldapconn-leak-bug418.dif -> 0002-nss_ldap-ldapconn-leak-bug418.dif nss_ldap-getent-retry.dif -> 0003-nss_ldap-getent-retry.dif nss_ldap-getent-skip-invalid-uidgidnumber.dif -> 0004-nss_ldap-getent-skip-invalid-uidgidnumber.dif nss_ldap-265-glibc-2.16.patch -> 0005-nss_ldap-265-glibc-2.16.patch nss_ldap-265-pthread.patch -> 0006-nss_ldap-265-pthread.patch bnc#842120.dif -> 0007-bnc#842120.dif bnc#866763.dif -> 0008-bnc#866763.dif - Add patches: * Resolve a connection management issue in oneshot operation mode & Fix bad variable initialisation (bsc#934444) 0009-fix-for-BUG-412-don-t-close-nested-contexts.patch 0010-initialize-context-in-_nss_ldap_getbyname.patch * Fix buffer management issue between glibc and LDAP (bsc#986858) 0011-When-invoked-via-glibc-the-input-buffer-is-enlarged.patch ==== obs-service-tar_scm ==== Version update (0.6.0.1469628830.67456b7 -> 0.6.1.1471594222.d257927) - Update to version 0.6.1.1471594222.d257927: * prefer local cache directory * jailed mode for docker integration * added setup of remote branches in jailed mode * new handling for remote/local branches when caching - cache handling will be refactored to have only one implementation in future. ==== okteta ==== Version update (16.04.3 -> 16.08.0) Subpackages: okteta-devel - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== okular ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== oxygen5 ==== Version update (5.7.3 -> 5.7.4) Subpackages: oxygen5-cursors oxygen5-decoration oxygen5-devel oxygen5-lang oxygen5-sounds oxygen5-style - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== oxygen5-icon-theme ==== Version update (5.24.0 -> 5.25.0) Subpackages: oxygen5-icon-theme-large - Update to 5.25.0 * Qt >= 5.5 is now required * Add application-menu to oxygen (kde#365629) * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== pangomm ==== Version update (2.40.0 -> 2.40.1) - Update to version 2.40.1: + C++11: Make all operator bool()s explicit. + Build: Fix silent builds (bgo#768797). ==== parley ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== patterns-openSUSE ==== Subpackages: patterns-openSUSE-apparmor patterns-openSUSE-apparmor_opt patterns-openSUSE-base patterns-openSUSE-books patterns-openSUSE-console patterns-openSUSE-devel_C_C++ patterns-openSUSE-devel_basis patterns-openSUSE-devel_gnome patterns-openSUSE-devel_ide patterns-openSUSE-devel_java patterns-openSUSE-devel_kde patterns-openSUSE-devel_kde_frameworks patterns-openSUSE-devel_kernel patterns-openSUSE-devel_osc_build patterns-openSUSE-devel_perl patterns-openSUSE-devel_python patterns-openSUSE-devel_qt4 patterns-openSUSE-devel_qt5 patterns-openSUSE-devel_rpm_build patterns-openSUSE-devel_ruby patterns-openSUSE-devel_web patterns-openSUSE-dhcp_dns_server patterns-openSUSE-directory_server patterns-openSUSE-enhanced_base patterns-openSUSE-enhanced_base_opt patterns-openSUSE-file_server patterns-openSUSE-fonts patterns-openSUSE-fonts_opt patterns-openSUSE-games patterns-openSUSE-gateway_server patterns-openSUSE-gnome patterns-openSUSE-gnome_admin patterns-openSUSE-gnome_basis patterns -openSUSE-gnome_basis_opt patterns-openSUSE-gnome_games patterns-openSUSE-gnome_ide patterns-openSUSE-gnome_imaging patterns-openSUSE-gnome_imaging_opt patterns-openSUSE-gnome_internet patterns-openSUSE-gnome_laptop patterns-openSUSE-gnome_multimedia patterns-openSUSE-gnome_multimedia_opt patterns-openSUSE-gnome_office patterns-openSUSE-gnome_office_opt patterns-openSUSE-gnome_utilities patterns-openSUSE-gnome_yast patterns-openSUSE-imaging patterns-openSUSE-imaging_opt patterns-openSUSE-kde patterns-openSUSE-kde_edutainment patterns-openSUSE-kde_games patterns-openSUSE-kde_ide patterns-openSUSE-kde_imaging patterns-openSUSE-kde_internet patterns-openSUSE-kde_multimedia patterns-openSUSE-kde_office patterns-openSUSE-kde_plasma patterns-openSUSE-kde_telepathy patterns-openSUSE-kde_utilities patterns-openSUSE-kde_utilities_opt patterns-openSUSE-kde_yast patterns-openSUSE-kvm_server patterns-openSUSE-lamp_server patterns-openSUSE-laptop patterns-openSUSE-lxde patterns-openSUSE-lxde_lap top patterns-openSUSE-lxde_office patterns-openSUSE-mail_server patterns-openSUSE-minimal_base patterns-openSUSE-minimal_base-conflicts patterns-openSUSE-misc_server patterns-openSUSE-multimedia patterns-openSUSE-multimedia_opt patterns-openSUSE-network_admin patterns-openSUSE-non_oss patterns-openSUSE-non_oss_opt patterns-openSUSE-office patterns-openSUSE-office_opt patterns-openSUSE-print_server patterns-openSUSE-remote_desktop patterns-openSUSE-rest_dvd patterns-openSUSE-sw_management patterns-openSUSE-sw_management_gnome patterns-openSUSE-sw_management_kde patterns-openSUSE-tabletpc patterns-openSUSE-technical_writing patterns-openSUSE-x11 patterns-openSUSE-x11_opt patterns-openSUSE-x11_yast patterns-openSUSE-xen_server patterns-openSUSE-xfce patterns-openSUSE-xfce_basis patterns-openSUSE-xfce_laptop patterns-openSUSE-xfce_office patterns-openSUSE-yast2_basis patterns-openSUSE-yast2_install_wf - Suggest instead of Recommend inkscape for the gnome_imaging_opt pattern, so that it is not pulled in by default on default GNOME pattern installs. Inkscape is a specialised app that users should install on their system if they need it, and the other desktop patterns (e.g. KDE) do not install it by default either. - Add the 'generic_server' pattern to the DVD. - Drop sox, vorbis-tools from console, this does not feel like the right place for them. Same for wodim. ==== pimcommon ==== Version update (16.04.3 -> 16.08.0) Subpackages: libKF5PimCommon5 - Build only on architectures supported by libqt5-qtwebengine - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== pixman ==== Subpackages: libpixman-1-0 libpixman-1-0-32bit libpixman-1-0-devel - Update to GNOME 3.20 Fate#318572 ==== plasma-framework ==== Version update (5.24.0 -> 5.25.0) Subpackages: plasma-framework-components plasma-framework-devel plasma-framework-private - Update to 5.25.0 * Qt >= 5.5 is now required * Keep compatiable slot createApplet with Frameworks 5.24 * Don't delete gl texture twice in thumbnail (kde#365946) * Add translation domain to wallpaper QML object * Don't manually delete applets * Add a kapptemplate for Plasma Wallpaper * Templates: register templates in own toplevel category "Plasma/" * Templates: Update techbase wiki links in READMEs * Define what Plasma packagestructures extend plasmashell * Support a size for adding applets * Define Plasma PackageStructure as regular KPackage PackageStructure plugins * Fix: update wallpaper example Autumn's config.qml to QtQuick.Controls * Use KPackage to install Plasma Packages * If we pass a QIcon as an argument to IconItem::Source, use it * Add overlay support to Plasma IconItem * Add Qt::Dialog to default flags to make QXcbWindow::isTransient() happy (kde#366278) * [Breeze Plasma Theme] Add network-flightmode-on/off icons * Emit contextualActionsAboutToShow before showing the applet's contextualActions menu (kde#366294) * [TextField] Bind to TextField length instead of text * [Button Styles] Horizontally center in icon-only mode (kde#365947) * [Containment] Treat HiddenStatus as low status * Add kruler system tray icon from Yuri Fabirovsky * Fix the infamous 'dialogs show up on the Task Manager' bug once more * Fix network wireless available icon with an ? emblem (kde#355490) * IconItem: Use better approach to disable animation when going from invisible to visible * Set Tooltip window type on ToolTipDialog through KWindowSystem API * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== plasma-nm5 ==== Version update (5.7.3 -> 5.7.4) Subpackages: plasma-nm5-openconnect plasma-nm5-openvpn plasma-nm5-pptp plasma-nm5-vpnc - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php - Adjust filelist for the plasmoid appdata, installed with KF > 5.25.0 ==== plasma5-addons ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php - Adjust filelist for the plasmoid appdata, installed with KF > 5.25.0 ==== plasma5-desktop ==== Version update (5.7.3 -> 5.7.4) - Don't try to remove kactivities5.po anymore, they have been removed upstream - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php - Add use-iconName-if-possible.patch: adjust the application menu's search function to use the iconName if set, and change the included runners to set the iconName instead of an icon to prevent threading issues and speed up things (boo#994983) ==== plasma5-integration ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== plasma5-openSUSE ==== Subpackages: plasma5-desktop-branding-openSUSE plasma5-workspace-branding-openSUSE - Set widgetStyle=Breeze in the openSUSE look-and-feel. Using breeze (lowercase) breaks the kconf update tool that should change the KDE4 config on first login, resulting in KDE4 applications still using oxygen. ==== plasma5-pa ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php - Adjust filelist for the plasmoid appdata, installed with KF > 5.25.0 ==== plasma5-pk-updates ==== - Add upstream commits fix-typo-in-icon-name.patch and use-new-breeze-icons.patch - Adjust filelist for the plasmoid appdata, installed with KF > 5.25.0 ==== plasma5-session ==== Version update (5.7.2 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php - Bump to 5.7.3 ==== plasma5-workspace ==== Version update (5.7.3 -> 5.7.4) Subpackages: drkonqi5 plasma5-workspace-devel plasma5-workspace-libs - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php - Refresh plasma5-workspace.spec - Add Use-iconName-instead-of-icon-in-all-runners.patch to fix problems in KRunner caused by QIcon not being thread-safe (boo#994983, kde#355122, kde#356957) - Use xterm to install the debug packages in drkonqi, konsole doesn't handle the -e parameter correctly currently (boo#990353, kde#366793) - Adjust filelist for the plasmoid appdata, installed with KF > 5.25.0 - Add add-separate-autostart-file-for-klipper.patch to prevent klipper from autostarting in e.g. GNOME (boo#993334) ==== polkit-kde-agent-5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== powerdevil5 ==== Version update (5.7.3 -> 5.7.4) - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== poxml ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== primus ==== Version update (20131226 -> 0+git20150328.d1afbf6) - Update to version 0+git20150328.d1afbf6: * Fix compilation on arm * pass any preprocessor flags defined by environment to gcc * Reuse initial ddpy if XOpenDisplay fails in display thread * Avoid using primus.ddpy in match_fbconfig * Avoid using primus.ddpy in match_visual (GH-132) * Remove some of the remaining uses of primus.ddpy * Defer glXChooseFBConfig from library constructor to first use (GH-151) * Revert back to using compiler support for ifuncs (GH-153) * Do not try to reuse ddpy fbconfig (fixes GH-160) * Fix connect() error detection (GH-163) - Drop merged patch type-directive.patch ==== signon-kwallet-extension ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== solid ==== Version update (5.24.0 -> 5.25.0) Subpackages: libKF5Solid5 solid-devel solid-imports solid-tools - Update to 5.25.0 * Qt >= 5.5 is now required * Always update the Predicate parser from yacc/lex sources * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== sonnet ==== Version update (5.24.0 -> 5.25.0) Subpackages: libKF5SonnetCore5 libKF5SonnetUi5 sonnet-devel - Update to 5.25.0 * Qt >= 5.5 is now required * hunspell: Clean up code for searching for dictionaries, add XDG dirs (kde#361409) * Try to fix language filter usage of language detection a bit * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== spectacle ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== sssd ==== Version update (1.14.0 -> 1.14.1) Subpackages: libnfsidmap-sss libsss_idmap0 libsss_nss_idmap0 libsss_simpleifp0 sssd-32bit sssd-krb5-common sssd-ldap - Update to new upstream release 1.14.1 * The IPA provider now supports logins with enterprise principals (also known as additional UPN suffixes). This functionality also enabled Active Directory users from trusted AD domains who use an additional UPN suffix to log in. Please note that this feature requires a recent IPA server. * When a user name is overriden in an IPA domain, resolving a group these users are a member of now returns the overriden user names * Users can be looked up by and log in with their e-mail address as an identifier. In order to do so, an attribute that represents the user's e-mail address is fetched by default. This attribute can by customized by setting the ldap_user_email configuration option. * A new ad_enabled_domains option was added. This option lets the administrator select domains that SSSD should attempt to reach in the AD forest SSSD is joined to. This option is useful for deployments where not all domains are reachable on the network level, yet the administrator needs to access some trusted domains and therefore disabling the subdomains provider completely is not desirable. * The sssctl tool has two new commands active-server and servers that allow the administrator to observe the server that SSSD is bound to and the servers that SSSD autodiscovered * SSSD used to fail to start when an attribute name is present in both the default SSSD attribute map and the custom ldap_user_extra_attrs map * GPO policy procesing no longer fails if the gPCMachineExtensionNames attribute only contains whitespaces * Several commits fix regressions related to switching all user and group names to fully qualified format, such as running initgroups for a user who is only a member of a primary group * Several patches fix regressions caused by splitting the database into two ldb files, such as when user attributes change without increasing the modifyTimestamp attribute value * systemd unit files are now shipped for the sssd-secrets responder, allowing the responder to be socket-activated. To do so, administrators should enable the sssd-secrets.socket and sssd-secrets.service systemd units. * The sssd binary has a new switch --disable-netlink that lets sssd skip messages from the kernel's netlink interface. * A crash when entries with special characters such as '(' were requested was fixed * The ldap_rfc_2307_fallback_to_local_users option was broken in the previous version. This release fixes the functionality. ==== step ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== sweeper ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== syndication ==== Version update (16.04.3 -> 16.08.0) - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== systemsettings5 ==== Version update (5.7.3 -> 5.7.4) Subpackages: systemsettings5-devel - Update to 5.7.4 * New bugfix release * For more details please see: https://www.kde.org/announcements/plasma-5.7.4.php ==== telepathy-glib ==== Subpackages: libtelepathy-glib0 typelib-1_0-TelepathyGlib-0_12 - Update to GNOME 3.20 Fate#318572 - Remove upstreamed patches: 0001-fix-file-path-leaks.patch 0001-tp_list_connection_managers_async-terminate-properly.patch ==== threadweaver ==== Version update (5.24.0 -> 5.25.0) Subpackages: libKF5ThreadWeaver5 threadweaver-devel - Update to 5.25.0 * Qt >= 5.5 is now required * For more details please see: https://www.kde.org/announcements/kde-frameworks-5.25.0.php ==== umbrello ==== Version update (16.04.3 -> 16.08.0) - Don't rename the icon files any more, this breaks the build as they are not found - Update to KDE Applications 16.08.0 * KDE Applications 16.08.0 * https://www.kde.org/announcements/announce-applications-16.08.0.php - Update to KDE Applications 16.07.90 * KDE Applications 16.07.90 (16.08-RC) * https://www.kde.org/announcements/announce-applications-16.07.90.php ==== usb_modeswitch ==== Subpackages: usb_modeswitch-data - Install required usb_modeswitch@.service, fixes boo#994763 ==== yast2 ==== Version update (3.1.203 -> 3.1.205) - Packages: remove warning icon from package callbacks. (bnc#988949) - 3.1.205 - Set AutoYaST default timeout entries for reporting errors correctly and do not overwrite AutoYaST profile settings. (bnc#988949) - 3.1.204 ==== yast2-bootloader ==== Version update (3.1.199 -> 3.1.203) - import properly device map in autoyast profile (found during debugging bnc#995627) - log device map entries before written them, to allow easier debugging of augeas lenses failure (bnc#995627) - 3.1.203 - fix crash when activating partition on md raid (bnc#995627) - 3.1.202 - warn user if enabling TPM when not available (bsc#994556) - 3.1.201 - fix proposing generic mbr if proposed to boot from MBR ( found during debugging bnc#994348 ) - 3.1.200 ==== yast2-installation ==== Version update (3.1.210 -> 3.1.213) - Move the installer self update step earlier in the workflow so the user entered values are not lost after restart and avoid repeating some steps again (bsc#985055) - This also fixes losing some values due to restaring YaST (bsc#993690), (bsc#992608) - Improved the self update URL handling - the boot parameter has the highest priority, always ask user when a SLP service is found, in AutoYaST mode SLP needs to be enabled in the profile - Display progress when downloading and applying the updates - 3.1.213 - Replace unicode bullet char by asterisk for ncurses (bsc#995082) - 3.1.212 - fix writing proposals (bnc#994127) - 3.1.211 ==== yast2-network ==== Version update (3.1.167 -> 3.1.168) - bnc#993587 - installer is able to newly configured set devices up in case of ssh/vnc installation - 3.1.168 ==== yast2-packager ==== Version update (3.1.115 -> 3.1.116) - Always enable "Next" button in license confirmation dialog, because even if not accepted, popup is shown to user (bnc#993530). - Use the same popup when license not confirmed for base product in the license confirmation dialog (bnc#993530). - 3.1.116 ==== yast2-storage ==== Version update (3.1.101 -> 3.1.102) - Don't check for installer restart as it's not needed anymore (bsc#985055) - 3.1.102 ==== yast2-update ==== Version update (3.1.41 -> 3.1.42) - The update installer has been moved earlier in the workflow. We don't need to store data to remember selected target/partitions anymore. (bsc#988287) - 3.1.42 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] How to push SElinux rules? [WAS: New package : Prelude SIEM]
by Greg Freemyer 02 Sep '16

02 Sep '16

On Thu, Sep 1, 2016 at 12:16 PM, Thomas Andrejak <thomas.andrejak(a)gmail.com> wrote: <snip> > For prelude-lml prelude-manager and prelude-correlator, I want to push > selinux rules but I can't find out how to solve my issue. Do you know > someone that can help me ? Anyone? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] How to submit a package only for Tumbleweed?
by Yasuhiko Kamata 01 Sep '16

01 Sep '16

Hello all, According to the bug report #995921 (https://bugzilla.suse.com/show_bug.cgi?id=995921), I've created instlux (openSUSE install tool from Windows) for Tumbleweed. But I think that Tumbleweed and Leap share the same management line; i.e. packages which submitted to Factory will be applied to both of them (although timings are different). But this (instlux for Tumbleweed) should be included only to Tumbleweed, not Leap, because download URL is embedded (built-in). So I want to ask how to handle it. Thanks in advance, -- Yasuhiko Kamata (instlux maintainer) E-mail: belphegor(a)belbel.or.jp -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] New Tumbleweed snapshot 20160831 released!
by Dominique Leuenberger 01 Sep '16

01 Sep '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: ffmpeg (3.1.2 -> 3.1.3) hplip libreoffice (5.2.0.4 -> 5.2.1.2) pango (1.40.1 -> 1.40.2) virtualbox (5.0.18 -> 5.1.4) xdm yast2-users (3.1.55 -> 3.1.56) === Details === ==== ffmpeg ==== Version update (3.1.2 -> 3.1.3) Subpackages: libavcodec57 libavformat57 libavutil55 libswresample2 - Update to version 3.1.3 * examples/demuxing_decoding: convert to codecpar * avcodec/exr: Check tile positions * avcodec/aacenc: Tighter input checks * avformat/wtvdec: Check pointer before use * libavcodec/wmalosslessdec: Check the remaining bits * avcodec/adpcm: Fix adpcm_ima_wav padding * avcodec/svq3: fix slice size check * avcodec/diracdec: Check numx/y * avcodec/h2645_parse: fix nal size * avcodec/h2645_parse: Use get_nalsize() in ff_h2645_packet_split() * h2645_parse: only read avc length code at the correct position * h2645_parse: don't overread AnnexB NALs within an avc stream * avcodec/h264_parser: Factor get_avc_nalsize() out * avcodec/cfhd: Increase minimum band dimension to 3 * avcodec/indeo2: check ctab * avformat/swfdec: Fix inflate() error code check * avcodec/rawdec: Fix bits_per_coded_sample checks * vcodec/h2645_parse: Clear buffer padding * avcodec/h2645: Fix NAL unit padding * avfilter/drawutils: Fix single plane with alpha * cmdutils: check for SetDllDirectory() availability ==== hplip ==== Subpackages: hplip-hpijs hplip-sane - Fixed device communication/detection problems with mdns/Bonjour * added hplip-mdns.patch (MDNS send/receive on every iterface) * added hplip-mdns-retry-query.patch (MDNS retry) See https://bugs.launchpad.net/hplip/+bug/1616861 ==== libreoffice ==== Version update (5.2.0.4 -> 5.2.1.2) Subpackages: libreoffice-base libreoffice-base-drivers-mysql libreoffice-branding-upstream libreoffice-calc libreoffice-calc-extensions libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-theme-breeze libreoffice-icon-theme-galaxy libreoffice-icon-theme-hicontrast libreoffice-icon-theme-oxygen libreoffice-icon-theme-sifr libreoffice-icon-theme-tango libreoffice-impress libreoffice-kde4 libreoffice-l10n-cs libreoffice-l10n-da libreoffice-l10n-de libreoffice-l10n-el libreoffice-l10n-en libreoffice-l10n-es libreoffice-l10n-fr libreoffice-l10n-hu libreoffice-l10n-it libreoffice-l10n-ja libreoffice-l10n-pl libreoffice-l10n-ru libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-writer libreoffice-writer-extensions libreofficekit - Version update to 5.2.1.2: * Various fixes for the 5.2 branch release ==== pango ==== Version update (1.40.1 -> 1.40.2) Subpackages: libpango-1_0-0 libpango-1_0-0-32bit pango-devel typelib-1_0-Pango-1_0 - Update to version 1.40.2: + Improve introspection builds in msvc (bgo#764984). + Properly handle UTF32 chars in coretext. + Add rebeccapurple to list of colors. + Correct font weight mapping in coretext (bgo#766148). + Use version macros for exports (bgo#767587). - Make libpango obsolete/provide pango-modules bsc#978972. Change by idonmez(a)suse.com. - Update to version 1.40.1: + Use $PKG_CONFIG consistently (bgo#764191). + Fix a PangoWin32FontMap memory leak (bgo#764089). - Update to version 1.40.0: + Fix typos. + Don't treat OGHAM SPACE MARK as whitespace. - Update to version 1.39.0: + Update PangoScript to Unicode 8.0. - Update to version 1.38.1: + Require Harfbuzz 0.9.30. + Fix make check with --enable-debug=no. + Win32 build fixes. - Drop pango-tools requirement from libpango-1_0-0: as there are no modules supported, there is also no querymodules call in the post scriptlet (also adjust baselibs.conf; do no longer build pango-tools-32bit, as it would be empty). - Update to version 1.38.0: + No changes. - Update to version 1.37.5: + Small optimizations. - Update to version 1.37.4: + Use grapheme boundaries in justification. + Support coloring marks and bases independently (bgo#541608). + Fix a crash (bgo#753167). + Make Thai and Arabic support thread-safe. + Fix justification. - Update to version 1.37.3: + Fix pango_glyph_item_iter_prev. + Add alpha attributes. + Add support for alpha in markup. - Update to version 1.37.2: + Don't use hb_glib_get_unicode_funcs. + Warning fixes. - Update to version 1.37.1: + Add attributes for OpenType font features (bgo#738505). + CoreText: locale handling improvements (bgo#750017). + Fix ellipsization with line space (bgo#750383). + Fix issues with hex boxes (bgo#750463). - Update to version 1.37.0: + Pango modules, engines, and config have been removed (bgo#733882). + Added pango_fc_font_map_config_changed() (bgo#748767). + Added pango_fc_font_map_[sg]et_config() (bgo#547671). + Added pango_matrix_get_font_scale_factors. + Lot of API has been deprecated. + Fix CoreText font fallback. + General build fixes. + Win32 build fixes. - Clean up scriptlets: as modules support no longer exist, there is no need for querymodules anymore. Change the existing macros in macros.pango to be dummy placeholders (to not break other packages referencing them). - fix bashism in post script - Update to version 1.36.8: + Make tests not fail on build.gnome.org. - Update to version 1.36.7: + Add tests for pango markup. + Add tests for PangoLayout. + Add an analysis flag for ellipsis (bgo#735719). + Treat attributes in ellipsis better (bgo#735732). - Update to version 1.36.6: + Cope with lack of LC_CTYPE (bgo#732276). + Prevent harfbuzz from using replacement char. + Don't force static builds on win32 (bgo#733137). + Allow backend selection via PANGOCAIRO_BACKEND. + Support more font weights (bgo#733764). + Fix vertical positioning on win32. + Don't break in the middle of jamo (bgo#705727). - Get rid of files using the old SUSE spelling (bnc#889024). - Update to version 1.36.5: + Lower the harfbuzz requirement. - Changes from version 1.36.4: + Improve thread-safety on Windows (bgo#695913). + Add missing annotations (bgo#729840). + Update PangoWeight documentation. + Require harfbuzz 0.9.29. - Update to version 1.36.3: + Fix builddir != srdir builds. + Avoid a crash when FT_Face is NULL (bgo#724006). + Win32 build fixes. + Update pango_color_parse docs (bgo#711061). - Pass --with-cairo to configure, to ensure we build the cairo backend. - Check for libpango instead of pango directory in pango-tools %post (bnc#864561). - Package modules.cache (bnc#864561#c3). - Fix location of pango.modules. - Update to version 1.36.2: + Win32 build fixes. + Fix a possible strtol(NULL) (bgo#719549). + Fix --with-included-modules. + Fix a FPE in pango_layout_iter_get_char_extents (bgo#720379). + Use 96 dpi for CoreText by default. - Update to version 1.36.1 (bnc#849913): + Handle scaling absolute font sizes (bgo#708778). + Small documentation fixes. - Update to version 1.36.0: + Remove a useless test (bgo#707131). + Never return NULL from pango_layout_get_test (bgo#707659). + Correct an annotation (bgo#707874). + Fix gravity map (bgo#708432). - Update to version 1.35.3: + Compiler warnings about strict aliasing (bgo#703995). + Getting rid of the arbitrary MAX_SIZE for font (bgo#707131). - Update to version 1.35.2: + Bypass line reordering in some cases (bgo#705007). - Update to version 1.35.0: + Requires cairo 1.12.10. + Add a --with-cairo option. + Handle invalid utf8 better (bgo#700577). + Install some tests. + Don't change fonts for space (bgo#701652). - Update to version 1.34.1: + bgo#696238: PangoAttrFilterFunc vs pango_attr_list_filter docs. + Update win32/CoreText shaper signature. + Fix CoreText scaling (again). + Align word breaking with newer Unicode specs. - bnc#792646, bnc#803529#c1: Change requires pango-tools in baselibs.conf to prereq in order to: + Match the behavior of the native lib in the .spec file, where we use (Requires(post). + Ensure the right version of pango-tools is installed when the post script is being executed. - Update to version 1.34.0: + No changes. - Update to version 1.33.9: + Port PangoWin32 to use GWeakRef. + Use G_DEFINE_TYPE in pangowin32-fontmap (bgo#682846). + Fix scale in pangocairo-threads test. + Misc Win32 build fixes. - Update to version 1.33.8: + Bugs fixed: bgo#694095, bgo#668154, bgo#694626, bgo#694626, bgo#694830, bgo#694918, bgo#694882. - Update to version 1.33.7: + Allow enabling font features through fontconfig snipplets. + Fix an infinite loop when starting Inkscape. - Update to version 1.32.6: + Make pango threadsafe. + Pass down BOT/EOT flags to HarfBuzz. + Broken relocation of modules (bgo#690279). + Build with automake-1.13 broken (bgo#691263). - Require at least pango 1.31.1 for the post scriptlets to work. This helps for dist upgrades from openSUSE 12.2, where pango-querymodules did not yet know the --update-cache parameter. Depending on the (random) installation order during zypper dup, the post scriptlet of libpango-1_0-0 might execute pango-querymodules --update-cache, but not yet have the new tools installed yet (bnc#792646) (same change in baselibs.conf). - Update to version 1.32.5: + Fix build failures (bgo#689864). + Other bugs fixed: bgo#689882, bgo#686512, bgo#690081, bgo#679299, bgo#689843. - Update to version 1.32.4: + Require harfbuzz 0.9.9. + Add serials tracking changes in PangoFontMap/PangoContext/ PangoLayout (bgo#340066). + Automatically relayout PangoLayout if PangoContext has changed. + Fix rendering of rotated frames. + Remove Thai/Lao Prepend/Extend properties (bgo#576156). + Fix grapheme properties of joiner / nonjoiner. + Fix grapheme properties of U+FFxx range. + Fix line break of surrogate characters. + Fix grapheme boundaries of surrogates and unassigned default ignorables. + Update bidi tables to Unicode 6.2.0. + Use -Bsymbolic-functions by default if available (bgo#689648). + Fix Win32 and CoreText cairo backends to take cairo CTM into account. - Update to version 1.32.3: + Make gobject-introspection PANGO_GLYPH happy + Provide a phony define for LANGUAGE + Adjust to harfbuzz 0.97 API - Do not provide typelib-1_0-Pango-1_0-32bit (baselibs.conf): this only results in a big mess of duplicate provides. Adding ($HOSTTYPE) to the typelib() symbols does not work, as we'd otherwise no longer be able to use them against noarch packages. - Update to version 1.32.2: + Fix load_fontset() for Win32 backend (bgo#685021). + pango-viewer: Flush cairo surface when done. + Xft: Fix a deadlock on display close (bgo#687470) + Add missing colors from the web palette. + Rename configure.in to configure.ac. - Make pango-devel-32bit available on all archs (baselibs.conf). - Remove redundant tags/sections from specfile. - Update to version 1.32.1: + Fixup grapheme clusters, cause of crashes (bgo#684959) - Update to version 1.32.0: + Add a --without-xfg configure option. + Add pango_shape_full(). - Update to version 1.31.2: + More work done towards thread-safety. + Build fixes on OS. - Add pkgconfig(glib-2.0) BuildRequires so it can be versioned. - Drop pango64.patch: + pango-querymodules now has a --update-cache option that will update a pango.modules file under %{_libdir}. This means we no longer need to differentiate the 64bit file since it's by definition in a different directory. + Use this --update-cache option instead of redirecting the output of pango-querymodules in the scriplets, in the macros we define in macros.pango, and in baselibs.conf. + Touch %{_libdir}/pango/%{pango_binary_version}/pango.modules in %install instead of %{_sysconfdir}/pango/pango.modules: this is the new file listing the modules. + Update README.SuSE accordingly. + As a side-effect, this fixes bnc#346210. - Update to version 1.31.1: + The module cache file can now be located in libdir. + Initial work towards making pango thread-safe. + Update to Unicode 6.1. + Deprecate a few API. + Bugs fixed: bgo#682421, bgo#678721, bgo#678997, bgo#653347, bgo#682952. - Rebased pango64.patch. - Update to version 1.31.0: + Port to harfbuzz 0.9.x, use external harfbuzz + Remove Arabic, Hangul, Hebrew, Khmer, Syriac, Tibetan and Thai shapers (replaced by harfbuzz) + Remove Indic module (replaced by harfbuzz) + Remove Atsui support (superseded by CoreText) + Remove PangoX + Bugs fixed: bgo#679654, bgo#680965, bgo#681423. - Drop pango-implicit.patch: fixed upstream. - Add pkgconfig(harfbuzz) BuildRequires: new dependency. - Bump pango_binary_version defines to 1.8.0 (in baselibs.conf too). - Update to version 1.30.1: + Update Arabic joining classes to 6.1.0 + Build fixes + Annotation fixes + Bugs fixed: bgo#667960, bgo#673497, bgo#675400. - Add pango-implicit.patch: Fix implicit declaration of pango_config_key_get_system. - Update to version 1.30.0: + bgo#667799: Fix cross-compiling bug in configure.in + bgo#664125: Zero-width spaces cause missing characters + CoreText backend: - implement font fallbacks - make more robust against broken fonts - make shaping engine more robust - Guard against glyph count of zero + Win32 build fixes - Split typelib files into typelib-1_0-Pango-1_0 subpackage. - Add typelib-1_0-Pango-1_0 Requires to devel subpackage. - Update to version 1.29.5: + Documentation fixes + Build fixes for ATSUI backend + Add more Chinese poetry + Fix ChanContext backtrack matching with GPOS + Bugs fixed: bgo#653985, bgo#635399, bgo#658561, bgo#656014, bgo#654689, bgo#403499, bgo#650456, bgo#653985, bgo#661612. - Update to version 1.29.4: + Prevent a crash when hitting the fallback engine (bgo#660360) - Update to version 1.29.3: + Minor fix in 1.29.1 tarball - Changes from version 1.29.1: + Lots of introspection markup added + Misc fixes - Drop pango-no-G_CONST_RETURN.patch: fixed upstream. - Add Url tag. - Change Obsoletes for pango-doc from <= to < to avoid rpmlint warning. This is safe as we've updated to new versions several times since removing pango-doc. - Add pango-no-G_CONST_RETURN.patch: Do not use G_CONST_RETURN, patch taken from upstream git (commit 4c7807da). - Fix %pango_module_post/%pango_module_postun to create the right file (pango.modules instead of pango.immodules). - Update to version 1.28.4: + Various introspection annotation fixes + Build fixes + Require glib >= 2.24.0 + Bugs fixed: - bgo#636348: Hex boxes are incorrectly scaled with non identity cairo scale. - bgo#639882: Heap corruption in font parsing with FreeType2 backend. - Update Obsoletes on library package (from <= to < ). - Drop pango-CVE-2011-0064.patch and pango-CVE-2011-0020.patch: fixed upstream. - Add pango-CVE-2011-0020.patch: fixes heap corruption in font parsing with FreeType2 backend. Fix bnc#666101, CVE-2011-0020. - Add pango-CVE-2011-0064.patch: handle realloc failure in the buffer to fix potential crashes. Fix bnc#672502, CVE-2011-0064. - Do not call pango-querymodules twice in the %post of libpango-1_0-0. Especially since the first call might fail since it's not in the if test. - Put comments that are in the scriptlets area of the spec file in "%if 0" statement: if we don't do that, they actually end up in the scriplets and can even make them fail if the scriptlets were just "-p /sbin/ldconfig". - Update packaging to use the shared library packaging policy: + Create libpango-1_0-0 and pango-tools subpackages. + Add pango-tools Requires to libpango-1_0-0 for the call to pango-querymodules in %post. + Make libpango-1_0-0 Provides/Obsoletes pango. + We need %post/%postun scriptlets for libpango-1_0-0 and pango-tools that call pango-querymodules when possible. + Update baselibs.conf accordingly, and simplify it a bit. - Add RPM macros (macros.pango) to make it easier to handle installation of a Pango module. - Add pango-tools Requires to pango-module-thai-lang for the call to pango-querymodules in %post/%postun. - Add pango-module-thai-lang to baselibs.conf, since people want the 32-bit module if they have the 32-bit library. - Update summaries and descriptions. - Use a find to remove .la files. - Use <prefix> in baselibs.conf since we use full paths there, and this is needed for x86 packages that put files in /emul/ia32-linux. - Update to version 1.28.3: + bgo#630857: introspection: Use --include-uninstalled - Changes from version 1.28.2: + Reduce DLL hijack risk and simplify code in basic-win32 module + Improve performance on Windows especially for non-Latin scripts + Bugs fixed: bgo#628497, bgo#626966, bgo#629632, bgo#625807 - Move gir files to devel subpackage. - Update BuildRequires to use the pkgconfig() style: use cairo, fontconfig, freetype2, gobject-2.0, gobject-introspection-1.0, libthai, xft, xrender instead of old-style BuildRequires (cairo-devel, glib2-devel, gobject-introspection-devel, libthai-devel) - Remove check for old versions of openSUSE (11.0 and earlier). - Update to version 1.28.1: + pango-view now accepts --margin + Various HarfBuzz bug fixes + Build fixes + Bugs fixed: - bgo#582698: Support CSS-style margin specification - bgo#621612: VPATH build fix - bgo#605870: Incorrect shaping for Syriac - bgo#457990: font metrics are not converted to user space in cairo backend - bgo#613015: [HB] Does not sanitize Device tables referenced from ValueRecords. - buildrequire pkg-config to fix provides - Update to version 1.28.0: + [HB] Fix leak when duplicating blob + Misc bug fixes + Bugs fixed: - bgo#611033 - Layout using ATSUI fontmap treats absolute font sizes a... - bgo#605655 - Pango 1.26.2 introduces kerning bug - bgo#611229 - Pango reads from uninitialized memory - bgo#594101 - [Indic] needed character class data updates to support unicode 5.1 - bgo#345066 - backspace changes independent indic characters - bgo#609326 - Complex script shaping failed in the FT2 backend on Windows - bgo#604128 - Applications crash when displaying Hebrew characters - bgo#608923 - Incorrect/broken ligatures on MacOS - bgo#610791 - checks fail for unused documented symbols - Update to version 1.27.1: + Enable introspection again + Misc HarfBuzz bug fixes + Improve PangoLayout line breaking + Revert usage of CoreText in ATSUI backend + Fix FT_Face finalizer call + Bugs fixed: - bgo#593240 - (pangoosx) Crash / infinite loop with Mac OS X - bgo#610183 - Pango doesn't compile with gcc 3.3.3 - bgo#582697 - Add pango-view --pixels option - Add baselibs.conf as a source - Add baselibs for SPARC - Update to version 1.26.2: + Fix non-standard C++ usage + Fix OpenType mark ligation + OS X bug fix + bgo#602823 - void function cannot return value + bgo#602660 - [HB] don't use flexible arrays + bgo#602408 - Invalid C++ code breaks compile with Sun C++ Compiler - Update to version 1.26.1: + [HB] Fix lookup_flag ignoring + Fix leak with non-mmapped fonts + Allow using uninstalled glib + bgo#341481 - pangocairo kerning problem with nonidentity scaling + bgo#587768 - Don't build pango-view twice + bgo#594101 - character class data updates to support unicode 5.1 + bgo#596837 - Typo in pango_cairo_show_layout documentation - Update to version 1.26.0: + bgo#595539 - Regressions in rendering certain Thai sequences - Update to version 1.25.6: + Fix a couple of array overflow bugs + Bugs fixed: - bgo#593240 - updating pango to latest git master makes things crash - bgo#593231 - < c99 compiler dislikes ValueRecord - Update to version 1.25.5: + Minor HarfBuzz code shuffling + Bugs fixed: - bgo#592484 - invalid write in HB - bgo#592194 - Fix missing _SC_PAGE_SIZE macro - Update to version 1.25.4: + Fix various possible overflows in HarfBuzz + Improve HB font sanitizing + Improved win32 performance + Really fix ming32 build issues + Re-enable introspection + Bugs fixed: - bgo#592131 - Add AM_SILENT_RULES - bgo#592036 - integer overflow bug causes misrendering of Nepali characters - bgo#591511 - hh-blob.c does not compile using mingw on windows - Update to version 1.25.3: + Fix couple of crashers + Enforce -fno-exceptions better, should fix build issues for distros on x86-64. + Call mprotect() only when available. + New public API: pango_glyph_item_get_logical_widths() + Remove G_GNUC_PURE attr from pango_glyph_string_get_width() + Fix buffer corruption in HarfBuzz + Bugs fixed: - bgo#591413 - needs to link with libstdc++ - bgo#591511 - hb-blob.c does not compile using mingw on windows - bgo#591557 - [HB] crash scrolling the evolution message list - bgo#591576 - crashed with SIGSEGV at pango - bgo#591465 - Gimp crashes upon opening the font selection dialog - Update to version 1.25.2: + Tweak C++ compiler options. If you get link errors with gcc on x86-64 about __gxx_personality_v0(), make sure your CXXFLAGS does not have -fexceptions. This will be fixed in Pango itself later. + Fix crasher with gzipped fonts. (bgo#591409) - Update to version 1.25.1: + Merge harfbuzz-ng: brand new OpenType Layout engine + Port to ATSUI backend to use CoreText instead of ATS + New public API: - pango_gravity_get_for_script_and_width() + Misc bug fixes - bgo#590042 - pango-view.1 manpage should not be gzipped - bgo#410169 - gravity problem with Common chars - bgo#589113 - Some characters rotated incorrectly in vertical text - bgo#582851 - Little fix for compiling with Cygwin - bgo#588060 - Fonts missing on Cygwin - Update to version 1.24.5: + Build introspection again + bgo#589133 - Firefox 3.5 complains about invalid weak references + bgo#585806 - crash during pango_fc_font_map_shutdown + bgo#588678 - pango crash: install a new theme from - Add gobject-introspection-devel BuildRequires. - Update to version 1.24.4: + bgo#586814 - Crashes related to fontmap destruction after upgrade - Update to version 1.24.3: + bgo#585337 - Fails to install: install: will not overwrite just-created + bgo#585164 - 'man preload' shows man page for pango-view + bgo#584328 - Persian sample text is not good + bgo#583250 - pango_font_metrics_get_approximate_char_width is wrong when LANG=fa_IR - Update pango64.patch to also patch Makefile.in, and drop autoreconf call: patching Makefile.in is simpler. - Update to version 1.24.2: + bgo#580987 ? SIGFPE in pango_glyph_string_index_to_x + bgo#580273 ? Font metrics functions incorrectly listed as reporting point sizes + bgo#579694 ? Cygwin parallel-build patch + bgo#578944 ? pango-1.24.1 fails its testsuite + bgo#578935 ? Syntax error (missing semicolon) in pango/pangowin32-fontmap.c - Update to version 1.24.1: + Fix a couple of crashers + Fix minor pangofc API semantics breakage + Better handle SFNT fonts in dfont containers + Improved docs + Improved Indic shaper for new Unicode 5.1 characters + Misc bug fixes + Bugs fixed in this release: - bgo#577952 ? Error loading {GDEF,GSUB,GPOS} table 0x6EAD - bgo#578336 ? ABI breakage from 1.22 to 1.24 in fontmap field of PangoFcFont - bgo#556132 ? gnome-panel crashed with SIGSEGV in g_cclosure_marshal_VOID__BOXED() - bgo#571291 ? Unicode 5.1 support in pango - Indic Lanuages - bgo#576298 ? Fails to link pango-view if --without-x is specified but cairo has X11 support - Update to version 1.24.0: + pango-view improvements: * pango-view -q now works without a X server * Ability to save to PS, EPS, PDF, and SVG files. Filetype is detected from output file extension * New options --foreground, --background, and --annotate * Now installs a manual page, thanks to help2man + PangoFc API changes: * PangoFcFont now has a "fontmap" property that subclasses can use at construction time to setup the font->fontmap link * New backend-public API: o pango_fc_font_map_find_decoder() + Misc optimizations + Build fixes + Misc bug fixes + Bugs fixed in this release: * bgo#547963 - man page for pango-view * bgo#502804 - pango-view or pangocairo-view option to annotate * bgo#502801 - per-backend pango-view options * bgo#502805 - pango-view option for foreground/background color * rh#490331 - Crash of galeon in libpango * bgo#523166 - pango-view opens display even when invoked with - q * bgo#567160 - Share cmap cache between PangoFcFont's of the same face * rh#487593 - crash changing language in gdm * bgo#572662 - Remove deprecated GTK+ symbols * bgo#572529 - Poor -I ordering can break build - Remove perl-XML-Parser and sgml-skel from BuildRequires - Remove AutoReqProv since it's default - Remove %if statements <= 1020 - Remove xorg-x11-libs from PreReq - Remove glibc-devel from Requires in -devel package - Merge -doc into -devel since it only contained gtk-doc - Remove custom CFLAGS ==== virtualbox ==== Version update (5.0.18 -> 5.1.4) Subpackages: virtualbox-guest-kmp-default virtualbox-guest-tools virtualbox-guest-x11 virtualbox-host-kmp-default virtualbox-qt - Add "ExclusiveArch: %ix86 x86_64" line back into the spec file. Handle a false positive indication from kmemleak. This patch is added to "modify_for_4_8_bo_move.patch". - The API for ttm_bo_move_memcpy() is changed in kernel 4.8. Add patch file "modify_for_4_8_bo_move.patch" to handle this case. - Version bump to 5.1.4 (released 2016-08-16 by Oracle) This is a maintenance release. The following items were fixed and/or added: GUI: show actual VM uptime in the session information window Audio: re-enabled speakers for Mac OS X guests (5.1.0 regression; bug #15611) Audio: fixed crashes under certain conditions USB: fixed a hang under certain conditions USB: fixed a hanging guest under certain conditions (bug #15747) PIIX4: implemented dummy SMBus controller to prevent annoying Linux kernel warnings about uninitialized SMBus base address (bug #9517) NVMe: several fixes to improve stability, fixed a crash while saving a VM state VMDK: Fixed an issue creating fixed size images with certain sizes and the Split2G option enabled (bug #15748) VHDX: fixed cloning images with VBoxManage clonehd (bug #14288) Storage: Fixed broken bandwidth limitation when the limit is very low (bug #14982) EFI: fixed sending debug messages in the EFI firmware if a serial port is enabled (bug #12161) OVF: when importing appliances, make sure that the version of the embedded VirtualBox-specific settings is processed, to get the default settings handling right VBoxManage: Don't try to set the medium type if there is no change (bug #13850) Linux installer: fixed some scripting issues (bugs #15701 and #15702) Linux installer: fixed a path issue on certain Linux distributions (bug #15717) Windows hosts: fixed corrupted mouse pointers with some Linux and Solaris guests (bug #15665) Linux Additions: made the video driver work on 32-bit guests with large video memory sizes (bug #15621) Linux Additions: made the video driver work on kernel 4.7 and later (bug #15769) Linux Additions: converted a failure message to an informational one when drivers could not be stopped during upgrade (bug #15692) Linux Additions: made the video driver work around an X server bug which cause screen refresh to stop (bug #15511) Windows Additions: auto-resizing fixes for Windows 10 guests (bug #15257) Windows Additions: fixed VBoxTray problems with Windows 2000 (bug #15661) - Other local changes: "changeset_60565.diff" is removed - fixed in upstream. "vbox-kernel47-cpu_has_pge.diff" -s removed - also fixed in upstream. - adjust file attributes on SUID helpers to avoid chkstat issues - remove obsolete libgsoap-devel (again) - remove /usr/lib/udev/rules.d/60-vboxdrv.rules - it is overruled from vboxdrv init script anyway - vboxdrv generates a /etc/udev/rules.d/60-vboxdrv.rules file on _every_ start, note that fact in /etc/default/virtualbox and describe a strategy to control this behaviour - relocate VBoxCreateUSBNode.sh to /usr/lib/virtualbox this is, where vboxdrv, resp. the generated 60-vboxdrv.rules file is expecting it - Remove request for patch that is no longer used. - Patch11 is file "vbox-kernel47-cpu_has_pge.diff". - Add upstream patch fix cpu_has_pge removed macro in kernel 4.7 Patch11 - Add ifarch ix86 to limit concurrency on 32bits (-j2) Remove ExcludeArch instructions - Version bump to 5.1.2 (released 2016-07-21 by Oracle) New main capabilities in Oracle VM VirtualBox 5.1 are: Improved Performance: Significantly improved performance for multi-CPU virtual machines and networking. Bug Reporting Tool: New utility able to collect all the information and logs related to the host and guest operating system, for debug or analysis purposes. Improved Logging Window: New logging functionalities to highlight and filter information related to guest Virtual Machines. Improved multimedia availability: Improved support for different USB devices and multi-channel audio availability. Flash storage emulation: New NVMHCI storage controller emulation available, able to emulate NVME devices - Flash storage - on guest Virtual Machine. Improved Linux integration: Automatic modules deployment in case of a Linux Kernel upgrade and improved systemd integration for the latest releases of popular Linux distributions. - Drop drm-vboxvideo-Add-delayed-update-to-support-fbdev.patch, fixed upstream. - Drop drm-vboxvideo-Initialize-data-needed-to-map-fbdev-memory.patch, fixed upstream. - Drop vbox-4.7.patch, fixed upstream. - vbox-permissions_warning.diff and vbox-usb-warning.diff updated to Qt5 - User Manual updated. - virtualbox-60-vboxdrv.rules: added missing udev rules for vboxdrvu and vboxnetctl (http://www.mgreene.org/?p=211) - Disable i586 builds as they fail with the OBS compiler. Increased VM to 20000 M. - Version bump to 5.0.26 (released 2016-07-18 by Oracle) This is a maintenance release. The following items were fixed and/or added: VMM: fixed a bug in the task switching code (ticket #15571) GUI: allow to overwrite an existing file when saving a log file (bug #8034) GUI: fixed screenshot if the VM is started in separate mode Audio: improved recording from USB headsets and other sources which might need conversion of captured data Audio: fixed regression of not having any audio available on Solaris hosts VGA: fixed an occasional hang when running Windows guests with 3D enabled Storage: fixed a possible endless reconnect loop for the iSCSI backend if connecting to the target succeeds but further I/O requests cause a disconnect Storage: fixed a bug when resizing certain VDI images which resulted in using the whole disk on the host (bug #15582) EFI: fixed access to devices attached to SATA port 2 and higher (bug #15607) API: fixed video recording with VBoxHeadless (bug #15443) API: don't crash if there is no graphics controller configured (bug #15628) VBoxSVC: fixed several memory leaks when handling .dmg images Solaris hosts: fixed a crash on hosts with certain CPU configurations Windows hosts: properly fall back to NDIS5 on pre-Vista hosts on silent installations - Version bump to 5.0.24 (released 2016-06-28 by Oracle) This is a maintenance release. The following items were fixed and/or added: VMM: reverted to the old I/O-APIC code for now to fix certain regressions with 5.0.22 (bug #15529). This means that the networking performance with certain guests will drop to the 5.0.20 level (bug #15295). One workaround is to disable GRO for Linux guests. Main: when taking a screenshot, don't save garbage for blanked screens NAT: correctly parse resolv.conf file with multiple separators (5.0.22 regression) Storage: fixed a possible corruption of stream optimized VMDK images from VMware when opened in read/write mode for the first time Audio: imlemented dynamic re-attaching of input/output devices on Mac OS X hosts ACPI: notify the guest when the battery / AC state changes instead of relying on guest polling Linux hosts: fixed VERR_VMM_SET_JMP_ABORTED_RESUME Guru Meditations on hosts with Linux 4.6 or later (bug #15439) - Version bump to 5.0.22 (released 2016-06-16 by Oracle) This is a maintenance release. The following items were fixed and/or added: VMM: fixes for certain Intel Atom hosts (bug #14915) VMM: properly restore the complete FPU state for 32-bit guests on 64-bit hosts on Intel Sandy Bridge and Ivy Bridge CPUs VMM: new I/O-APIC implementation fixing several bugs and improving the performance under certain conditions (bug #15295 and others) VMM: fixed a potential Linux guest panic on AMD hosts VMM: fixed a potential hang with 32-bit EFI guests on Intel CPUs (VT-x without unrestricted guest execution) GUI: don't allow to start subsequent separate VM instances GUI: raised upper limit for video capture screen resolution (bug #15432) GUI: warn if the VM has less than 128MB VRAM configured and 3D enabled Main: when monitoring DNS configuration changes on Windows hosts avoid false positives from competing DHCP renewals. This should fix NAT link flaps when host has multiple DHCP configured interfaces, in particular when the host uses OpnVPN. Main: properly display an error message if the VRDE server cannot be enabled at runtime, for example because another service is using the same port NAT: Initialize guest address guess for wildcard port-forwarding rules with default guest address (bug #15412) VGA: fix for a problem which made certain legacy guests crash under certain conditions (bug #14811) ACPI: properly notify the guest if the ACPI battery state changed OVF: fixed import problems for some appliances using an AHCI controller created by 3rd party applications SDK: reduced memory usage in the webservice Java bindings Linux hosts: EL 6.8 fix (bug #15411) Linux hosts: Linux 4.7 fix (bug #15459) Linux Additions: Linux 4.7 fixes (bug #15444) Linux Additions: fix for certain 32-bit guests (5.0.18 regression; bug #15320) Linux Additions: fixed mouse pointer offset (5.0.18 regression; bug #15324) Linux Additions: made old X.Org releases work again with kernels 3.11 and later (5.0.18 regression; bug #15319) Linux Additions: fixed X.Org crash after hard guest reset (5.0.18 regression; bug #15354) Linux Additions: don't stop the X11 setup if loading the shared folders module fails (5.0.18 regression) Linux Additions: don't complain if the Drag and Drop service is not available on the host Solaris Additions: added support for X.org 1.18 Local openSUSE specific changes: File "changeset_60565.diff" is no longer needced and has been removed. Version bump to 5.0.20 (released 2016-04-28 by Oracle) This is a maintenance release. The following items were fixed and/or added: Storage: fixed a regression causing write requests from the BIOS to cause a Guru Meditation with the LsiLogic SCSI controller (5.0.18 regression; bug #15317) Storage: several emulation fixes in the BusLogic SCSI controller emulation NAT Network: support TCP in DNS proxy (same problem as in bug #14736 for NAT) NAT: rework handling of port-forwarding rules (bug #13570) NAT: rewrite host resolver to handle more query types and make it asynchronous so that a stalled lookup doesn't block all NAT traffic Snapshots: don't crash when restoring a snapshot which has more network adapters than the current state (ie when the snapshot uses ICH9 and the current state uses PIIX3) Guest Control: various bugfixes for the copyfrom and copyto commands / API (bug #14336) VBoxManage: list processor features on list hostinfo (bug #15334) Linux hosts: fix for Linux 4.5 if CONFIG_NET_CLS_ACT is enabled (bug #15327) Windows Additions: fixed performance issues with PowerPoint 2010 and the WDDM graphics drivers if Aero is disabled ==== xdm ==== Subpackages: xdm-xsession - spec-file: Move '%fillup_only -n displaymanager' into %else clause of test for initV/systemd as this is only required for systemd. ==== yast2-users ==== Version update (3.1.55 -> 3.1.56) - AutoYaST: Checking users entries for duplicate username/UIDs. (bnc#995397) - 3.1.56 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Reminder: pending review requests in the Leap 42.2 Staging
by Max Lin 01 Sep '16

01 Sep '16

Hi, After announced about fcc-submiter was involved in the Leap 42.2 development process[1], so far we still have about one hundred requests were opened by fcc-submitter and no response from project/package maintainer. If you're project/package maintainer please check whether you have the pending review request in your review list, please review them as soon as possible, Beta2 is three weeks away. Still, if you think that package makes sense in Leap 42.2 and you are willing to maintain it, accept it; if not, decline it. [1] https://lists.opensuse.org/opensuse-factory/2016-08/msg00145.html Regards, Max -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Issues with Tumbleweed, graficscard AMD RX 460 , Kernel 4.7.2-1
by Peter Mc Donough 01 Sep '16

01 Sep '16

Hi, I had to replace the graficscard in my opensuse 13.2 desktop computer. After a little research I choose a "newer" AMD RX 460 expecting it to run with the open source driver better on a freshly installed Tumbleweed than on my suse 13.2. Success (!), it runs much better, apart from four issues, which may be related to the graficscard. 1) When the computer is booted I see two messages: 3.342677] amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff 5.566632] sp5100_tco: I/O address 0x0cd6 already in use After a very short pause booting continuous as it should and I can work with the computer. Unfortunately three other issues have turned up: 2) It is not possible changing with Yast the boot-loader kernel-parameter splash= silent to splash=verbose, Top tells me the CPU-load raises to 100% i.e 25% (4-core AMD-processor) and that is it. I have to kill y2base. 3) The same with Yast and hardware-information: 100% CPU-load, stopps at 25% "results" (framebuffer???), can only be left by killing y2base. 4) A new kernel arrived yesterday, 4.7.2 -1.2. I set the computer to init level 2 and tried zypper refresh, zypper up. Everything was downloaded. Checking for conflicts successful to 51% then CPU-load 200% no further progress for at least 3 minutes. I stopped it with <ctrl><c>. Presently the computer boots according to dmesg with: [ 0.000000] Linux version 4.7.2-1-default (geeko@buildhost) (gcc version 6.1.1 20160815 [gcc-6-branch revision 239479] (SUSE Linux) ) #1 SMP PREEMPT Sun Aug 21 08:59:11 UTC 2016 (34ba8d6) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.7.2-1-default root=UUID=7ad5e8ea-1f2a-4da6-8c17-d0bb10ec5c18 resume=/dev/sdb3 splash=silent quiet showopts Any ideas? cu Peter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] Missing Qt development files
by Larry Finger 01 Sep '16

01 Sep '16

Using Leap 42.2 Beta 1, I am unable to build the Qt-based GUI for kernel configuration as the necessary development package is not available. My workaround is to use the ncurses-based configuration utility; however, the GUI is much more convenient. Bug filed at https://bugzilla.opensuse.org/show_bug.cgi?id=996753. Larry -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0