December 2016 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] nodejs renamed to nodejs6 on Tumbleweed
by Karl Cheng 12 Dec '16

12 Dec '16

Hi everyone, With the update to Node.js 6.9.2, users will need to install the nodejs6 package to receive this update as the nodejs package has been removed. This is to keep in line with the naming scheme for Leap, as well as the Web & Scripting Module in SLE. Node.js 7.x has not been submitted to Factory yet as an odd bug remains[1] that arguably should not be present in a post-testing release. [1]: https://github.com/nodejs/node/issues/9419 - Karl Cheng (Qantas94Heavy) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20161211 released!
by Dominique Leuenberger 12 Dec '16

12 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: alsa alsa-plugins build (20161025 -> 20161206) gnome-software (3.22.3 -> 3.22.4) kiwi (7.04.17 -> 7.04.21) krb5 (1.14.3 -> 1.15) libgda libinput (1.5.2 -> 1.5.3) libssh libvirt (2.4.0 -> 2.5.0) m17n-lib postgresql93 (9.3.14 -> 9.3.15) postgresql94 (9.4.9 -> 9.4.10) postgresql94-libs (9.4.9 -> 9.4.10) python3-pytz (2016.7 -> 2016.10) python3-setuptools (30.2.0 -> 30.3.0) sensors shared-mime-info (1.7 -> 1.8) smartmontools (6.4 -> 6.5) sssd tcsh texlive-specs-m (2016.112.svn40218 -> 2016.113.svn40218) vim (8.0.102 -> 8.0.130) xdm === Details === ==== alsa ==== Subpackages: alsa-devel libasound2 libasound2-32bit - Backport upstream fixes (bsc#1012594): - A few PCM bugs have been fixed: * Stall of dmix and others in a wrong PCM state * Refactoring of PCM locking scheme * SHM initialization race fix * plug PCM memory leaks * Improvement of dshare/dmix delay calculation * Fix endless dshare draining * Fix semaphore discard race fix of direct plugins - UCM fixes and updates for DB410c and skylake-r5286 - Mixer code cleanup not to install bogus plugin codes - Documentation fixes / updates 0001-ucm-Add-ucm-files-for-DB410c-board.patch 0002-mixer-Fix-rounding-mode-documentation.patch 0003-pcm-Fix-shm-initialization-race-condition.patch 0004-pcm-Better-understandable-locking-code.patch 0005-ucm-fix-crash-when-calling-snd_use_case_geti-with-no.patch 0006-ucm-docs-typeset-lists-of-identifiers-explicitly.patch 0007-Update-include-sound-tlv.h-from-4.9-pre-kernel-uapi.patch 0008-test-use-actual-information-for-TLV-operation.patch 0009-ctl-improve-API-documentation-for-TLV-operation.patch 0010-ctl-improve-documentation-about-TLV-related-APIs.patch 0011-ctl-correct-documentation-about-TLV-feature.patch 0012-conf-ucm-skylake-add-skylake-rt286-conf-files.patch 0013-pcm_plug-Clear-plugins-on-all-error-conditions.patch 0014-mixer-Don-t-install-smixer-modules-unless-python-is-.patch 0015-pcm_dshare-Do-not-discard-slave-reported-delay-in-st.patch 0016-pcm-direct-Protect-from-freeing-semaphore-when-alrea.patch 0017-pcm-dshare-Fix-endless-playback-of-buffer.patch 0018-pcm-Add-the-PCM-state-checks-to-plugins.patch 0019-pcm-dmix-Do-not-discard-slave-reported-delay-in-stat.patch - smixer module files got removed from the file list as well ==== alsa-plugins ==== Subpackages: alsa-plugins-32bit alsa-plugins-pulse alsa-plugins-pulse-32bit - Own alsa-lib dir, needed due to changes in alsa. ==== build ==== Version update (20161025 -> 20161206) Subpackages: build-mkbaselibs build-mkdrpms - add config for openSUSE Leap 42.3 (alpha, non-final) - handle Fedora 25 special cases - Improve /proc mount behaviour - fix dependency on CentOS (build#2415) - Use weak dependencies as 3rd choice breaker - support statistics from xvda devices - build env wipe support (--wipe command) - speed up build (for preinstall and keeping packages) - Recognize Recommends and Supplements relations of RPMs. - fix build against susetags repos ==== gnome-software ==== Version update (3.22.3 -> 3.22.4) - Update to version 3.22.4: + Add locking to GsApp to fix hard-to-debug thread related crashes. + Fix various top crashers listed on Fedora's retrace server. + Fix an issue that caused app addon install/removal to get triggered without user interaction. + Make flatpakref installation work. + Hide review buttons when there's no internet connection. + Updated translations. ==== kiwi ==== Version update (7.04.17 -> 7.04.21) Subpackages: kiwi-desc-isoboot kiwi-desc-netboot kiwi-desc-oemboot kiwi-desc-vmxboot kiwi-doc kiwi-media-requires kiwi-pxeboot kiwi-templates kiwi-tools - v7.04.21 released - Control volume variables order in .profile This commits modifies KIWIProfileFile::writeProfile behavior in order to write in special order the variables of the LVM volumes. The sorting criteria is based on the mount point, this way we prevent nested mount points to be mounted in wrong order. - v7.04.20 released - Fixed expansion of msdos disks If the target disk size is beyond 2TB it can't be expanded to the full size if the msdos partition table layout is in use. Because of this the disk expansion will be limited to the allowed maximum for the msdos partition table type which is at 2TB. This fixes bnc#1010966 - v7.04.19 released - Fixed release network using ip tool Apply the cidr fix from setupNic and introduce a new method called deleteNic which replaces the wrong ip call from the releaseNetwork method. Fixes bnc#1003091 - Move bootloader_cmdline to etc For netboot images the information should be permanently available Thus the former tmp location was not suitable. Fixes bnc#1009032 - v7.04.18 released - Fixup lease time in setupNetworkWicked The default lease time with 300s used by wicked is relatively short and different from the default lease time of the former dhcpcd. This change causes wicked to use a lease time of 3600s This is related to bnc#1003091 - Fixup default behavior of releaseNetwork If no tool was found to communicate with the dhcp server in order to free the lease the method did nothing. However it should at least bring down the network. This is related to bnc#1003091 - Fixup setupNic for address information in cidr Ignore netmask if address is already in cidr format - Lazy umount for the chrooted environment With this commit the mount points that fail to umount when trying a regular umount, a lazy umount is applied. This can be helpful in case the installation of some service in the chrooted environment created/opened something inside a mount point preventing it to be unmounted immediately. This commit is related with the issue bnc#1008898 - Refactoring of getKernelBootParameters Instead of trying to extract the cmdline information from the various bootloader config files we now write a metadata file which contains this information as result of the bootloader configuration - Translated using Weblate (Italian) Currently translated at 100.0% (28 of 28 strings) - Translated using Weblate (Italian) Currently translated at 100.0% (28 of 28 strings) - Fixup netboot code for multipath boot device If the root disk in a netboot deployment is a multipath device we have to make sure the multipathd is started and the boot device is mapped to the wwn - Add reading of kernel boot params from grub.cfg The method getKernelBootParameters has been extended to be able to read the kernel boot params also from boot/grub2/grub.cfg This fixes bnc#1009032 ==== krb5 ==== Version update (1.14.3 -> 1.15) Subpackages: krb5-32bit krb5-client krb5-devel - Upgrade to 1.15 - obsoleted Patch7 (krb5-1.7-doublelog.patch) fixed in 1.12.2 - obsoleted patch to src/util/gss-kernel-lib/Makefile.in since file is not available in upstream source anymore - obsoleted Patch15 (krb5-fix_interposer.patch) fixed in 1.15 - Upgrade from 1.14.4 to 1.15 - major changes: Administrator experience: * Add support to kadmin for remote extraction of current keys without changing them (requires a special kadmin permission that is excluded from the wildcard permission), with the exception of highly protected keys. * Add a lockdown_keys principal attribute to prevent retrieval of the principal's keys (old or new) via the kadmin protocol. In newly created databases, this attribute is set on the krbtgt and kadmin principals. * Restore recursive dump capability for DB2 back end, so sites can more easily recover from database corruption resulting from power failure events. * Add DNS auto-discovery of KDC and kpasswd servers from URI records, in addition to SRV records. URI records can convey TCP and UDP servers and master KDC status in a single DNS lookup, and can also point to HTTPS proxy servers. * Add support for password history to the LDAP back end. * Add support for principal renaming to the LDAP back end. * Use the getrandom system call on supported Linux kernels to avoid blocking problems when getting entropy from the operating system. * In the PKINIT client, use the correct DigestInfo encoding for PKCS [#1] signatures, so that some especially strict smart cards will work. Code quality: * Clean up numerous compilation warnings. * Remove various infrequently built modules, including some preauth modules that were not built by default. Developer experience: * Add support for building with OpenSSL 1.1. * Use SHA-256 instead of MD5 for (non-cryptographic) hashing of authenticators in the replay cache. This helps sites that must build with FIPS 140 conformant libraries that lack MD5. Protocol evolution: * Add support for the AES-SHA2 enctypes, which allows sites to conform to Suite B crypto requirements. - Upgrade from 1.14.3 to 1.14.4 - major changes: * Fix some rare btree data corruption bugs * Fix numerous minor memory leaks * Improve portability (Linux-ppc64el, FreeBSD) * Improve some error messages * Improve documentation ==== libgda ==== Subpackages: libgda-5_0-4 libgda-5_0-4-lang libgda-5_0-bdb libgda-5_0-sqlcipher libgda-5_0-sqlite libgda-ui-5_0-4 libgda-ui-5_0-plugins - Automatically find the current version of VALA and pass the correct string to --enable-vala VALA_API_VERSION=. This allows us not having to change the .spec every 6 months. ==== libinput ==== Version update (1.5.2 -> 1.5.3) Subpackages: libinput-udev libinput10 - Update to version 1.5.3: * The HP Pavilion DM4 has a quirk added to disable (jumpy) multitouch events. * The calibration matrix udev property is now parsed for the path backend (and parsed in a locale-independent manner). * We now sync the BTN_TOOL_FINGER state on init. If your touchpad didn't respond until you put two fingers down, this is fixed now (observed on one elantech touchpad). ==== libssh ==== Subpackages: libssh-devel libssh4 - Update descriptions. Drop redundant pkgconfig require (it's autodetected). ==== libvirt ==== Version update (2.4.0 -> 2.5.0) Subpackages: libvirt-client libvirt-daemon libvirt-daemon-config-network libvirt-daemon-config-nwfilter libvirt-daemon-driver-interface libvirt-daemon-driver-libxl libvirt-daemon-driver-lxc libvirt-daemon-driver-network libvirt-daemon-driver-nodedev libvirt-daemon-driver-nwfilter libvirt-daemon-driver-qemu libvirt-daemon-driver-secret libvirt-daemon-driver-storage libvirt-daemon-driver-uml libvirt-daemon-driver-vbox libvirt-daemon-lxc libvirt-daemon-qemu libvirt-daemon-xen libvirt-libs - Update to libvirt 2.5.0 - Many incremental improvements and bug fixes, see http://libvirt.org/news.html - Import new public signing key ==== m17n-lib ==== - Fix crash in Marathi transliteration: m17n-lib-1.7.0-fix-crash-in-marathi-transliteration.patch See also: https://lists.nongnu.org/archive/html/m17n-list/2015-08/msg00001.html https://lists.nongnu.org/archive/html/m17n-list/2015-08/msg00002.html ==== postgresql93 ==== Version update (9.3.14 -> 9.3.15) - Update to version 9.3.15: * Fix WAL-logging of truncation of relation free space maps and visibility maps * Fix SELECT FOR UPDATE/SHARE to correctly lock tuples that have been updated by a subsequently-aborted transaction * Fix EvalPlanQual rechecks involving CTE scans * Fix improper repetition of previous results from hashed aggregation in a subquery * Fix EXPLAIN to emit valid XML when track_io_timing is on * For the other bug fixes, see the release notes: https://www.postgresql.org/docs/9.3/static/release-9-3-15.html ==== postgresql94 ==== Version update (9.4.9 -> 9.4.10) Subpackages: postgresql94-contrib postgresql94-docs postgresql94-server - Update to version 9.4.10: * Fix WAL-logging of truncation of relation free space maps and visibility maps * Fix incorrect creation of GIN index WAL records on big-endian machines * Fix SELECT FOR UPDATE/SHARE to correctly lock tuples that have been updated by a subsequently-aborted transaction * Fix EvalPlanQual rechecks involving CTE scans * Fix improper repetition of previous results from hashed aggregation in a subquery * For the other bug fixes, see the release notes: https://www.postgresql.org/docs/9.4/static/release-9-4-10.html ==== postgresql94-libs ==== Version update (9.4.9 -> 9.4.10) - Update to version 9.4.10: * Fix WAL-logging of truncation of relation free space maps and visibility maps * Fix incorrect creation of GIN index WAL records on big-endian machines * Fix SELECT FOR UPDATE/SHARE to correctly lock tuples that have been updated by a subsequently-aborted transaction * Fix EvalPlanQual rechecks involving CTE scans * Fix improper repetition of previous results from hashed aggregation in a subquery * For the other bug fixes, see the release notes: https://www.postgresql.org/docs/9.4/static/release-9-4-10.html ==== python3-pytz ==== Version update (2016.7 -> 2016.10) - update to version 2016.10: (no changelog available) ==== python3-setuptools ==== Version update (30.2.0 -> 30.3.0) - update to version 30.3.0: * #394 via #862: Added support for declarative package config in a setup.cfg file. - changes from version 30.2.1: * #850: In test command, invoke unittest.main with indication not to exit the process. ==== sensors ==== Subpackages: libsensors4 libsensors4-32bit libsensors4-devel - lm_sensors-3.4.0+-Only-probe-I-O-ports-on-x86.patch: Skip "random" I/O port probing on non-x86 machines (bsc#1008552) ==== shared-mime-info ==== Version update (1.7 -> 1.8) - Update to version 1.8: + Add Flatpak-related mime-types. + Add mime-type for a number of Thomson-related disk (and cassette) images. + Add many audio and video mime-type aliases as used in VLC. + Add mime-type for pdf.lz files. + Write the correct length for literal and glob lists to the cache. + Build fixes. ==== smartmontools ==== Version update (6.4 -> 6.5) - update to 6.5 version * Experimental support for NVMe devices on FreeBSD, Linux and Windows. * smartctl '-i', '-c', '-H' and '-l error': NVMe support. * smartctl '-l nvmelog': New option for NVMe. * smartd.conf '-H', '-l error' and '-W': NVMe support. * Optional NVMe device scanning support on Linux and Windows. * configure option '--with-nvme-devicescan' to include NVMe in * default device scanning result. * Device scanning now allows to specify multiple '-d TYPE' options. * ATA: Added new POWER MODE values introduced in ATA ACS-2. * ATA: SCT commands are no longer issued if ATA Security is locked. * SCSI: LB provisioning improvements. * SCSI: Fixed GLTSD bit set/cleared info messages. * SCSI: Solid State media log page is no longer checked for tapes. * SCSI: Improved handling when no tape cartridge in drive. * SCSI: Workaround for buggy Seagate firmware. * SAT: Improved heuristics to detect bogus sense data from SAT layer. * smartd: Fixed crash on missing argument to '-s' directive. update-smart-drivedb: Now uses HTTPS for download by default. * update-smart-drivedb: New options to select URL and download tool. * update-smart-drivedb: New download tool 'svn'. * configure option '--without-update-smart-drivedb' to disable update-smart-drivedb script. * configure options '--disable-drivedb', '--enable-savestates', '--enable-attributelog' and '--with-docdir' are no longer supported. * autoconf < 2.60 and automake < 1.10 are no longer supported. * Drive database file now also includes the DEFAULT setting for each attribute. * HDD, SSD and USB additions to drive database. * Darwin: New support files for package installer. * New makefile target 'install-darwin' builds DMG image. * Solaris: Auto detection of SATA devices behind SAT layer. * Solaris SPARC: Legacy ATA support disabled by default. New configure option '--with-solaris-sparc-ata' enables it. File os_solaris_ata.s is no longer included in source tarball. * Windows: Auto detection of USB devices specified by drive letter. * Windows: Device scanning does no longer ignore unknown USB devices. * Windows: Prevent drive spin up by '-n standby' check. * Windows: New application manifests indicating Win 10 support. * Windows smartd: '-m [sys]msgbox' is no longer supported. * Windows installer: Defaults to 64-bit version on 64-bit Windows. * Various code changes suggested by Clang Static Analyser and Cppcheck. - enable "--with-nvme-devicescan" option - update smartmontools-drivedb.h file - use --with-savestates, --with-attributelog, --docdir instead of old options ==== sssd ==== Subpackages: libnfsidmap-sss libsss_idmap0 libsss_nss_idmap0 libsss_simpleifp0 sssd-32bit sssd-krb5-common sssd-ldap - Add 0001-krb5-1.15-build-fix.patch to unlock building against future KRB versions. ==== tcsh ==== Subpackages: tcsh-lang - Add patch tcsh-6.20-ptr-update.patch from mailing list to correct updating pointers to a reallocated buffer of of linked list elements - Remove --hash-size options as there is no any change in the final binary nor library anymore ==== texlive-specs-m ==== Version update (2016.112.svn40218 -> 2016.113.svn40218) - Add patch latexdiff_perl.dif which includes the upstream commits cfe445c and a83d9c to fix boo#1013904 ==== vim ==== Version update (8.0.102 -> 8.0.130) Subpackages: gvim vim-data - Updated to revision 130, fixes the following problems * Not enough testing for entering Ex commands. * Display problem with 'foldcolumn' and a wide character. (esiegerman) * Cancelling completion still inserts text when formatting is done for 'textwidth'. (lacygoill) * Display test fails on MS-Windows. * Parallel make still doesn't work. (Lewis Muir) * Configure uses "ushort" while the Vim code doesn't. - Updated to revision 124, fixes the following problems * May not process channel readahead. (skywind) * Value of 'thesaurus' option not checked properly. * When using ch_read() with zero timeout, can't tell the difference between reading an empty line and nothing available. * Cannot use a semicolon in 'backupext'. (Jeff) * When reading channel output in a timer, messages may go missing. (Skywind) * The channel "drop" option is not tested. * Still checking if memcmp() exists while every system should have it now. * Drop command doesn't use existing window. * The :history command is not tested. * Tests 92 and 93 are old style. * When reading English help and using CTRl-] the language from 'helplang' is used. * Parallel make fails. (J. Lewis Muir) * No test for using CTRL-R on the command line. * Setting 'cursorline' changes the curswant column. (Daniel Hahler) * Internal error for assert_inrange(1, 1). ==== xdm ==== Subpackages: xdm-xsession - Be sure that display managers will be started *after* systemd's login manager (boo#1013200) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20161210 released!
by Dominique Leuenberger 11 Dec '16

11 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: gstreamer-editing-services (1.8.3 -> 1.10.2) gstreamer-rtsp-server (1.8.3 -> 1.10.2) gstreamer-validate (1.8.3 -> 1.10.2) kernel-source (4.8.12 -> 4.8.13) perl-Devel-StackTrace (2.01 -> 2.02) pitivi (0.97.1 -> 0.98) python-packaging (16.7 -> 16.8) python3-gst (1.8.3 -> 1.10.2) wine (1.9.24 -> 2.0~rc1) === Details === ==== gstreamer-editing-services ==== Version update (1.8.3 -> 1.10.2) Subpackages: libges-1_0-0 typelib-1_0-GES-1_0 - Update to version 1.10.2: + Bugs fixed: bgo#774751. - Update to version 1.10.1: + Minor bugfixes. - Changes from version 1.10.0: + Minor bugfixes. ==== gstreamer-rtsp-server ==== Version update (1.8.3 -> 1.10.2) - Update to version 1.10.2: + Bugs fixed: bgo#765673, bgo#770239. - Update to version 1.10.1: + Meson update. - Changes from version 1.10.0: + Bugs fixed: bgo#771983, bgo#772478, bgo#773640. ==== gstreamer-validate ==== Version update (1.8.3 -> 1.10.2) Subpackages: libgstvalidate-1_0-0 typelib-1_0-GstValidate-1_0 - Update to version 1.10.2: + Minor bugfixes. - Update to version 1.10.1: + Meson update. - Changes from version 1.10.0: + Bugs fixed: bgo#772439, bgo#772543. - Add pkgconfig(json-glib-1.0) BuildRequires: New dependency. ==== kernel-source ==== Version update (4.8.12 -> 4.8.13) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - Don't feed anything but regular iovec's to blk_rq_map_user_iov (CVE-2016-9576 bsc#1013604). - commit 7730184 - Linux 4.8.13 (bnc#1012628 boo#1008745 bsc#1010970). - Delete patches.fixes/0001-libfc-fix-seconds_since_last_reset-miscalculation.patch. - Delete patches.fixes/kasan-update-kasan_global-for-gcc-7.patch. - Delete patches.fixes/zram-Fix-unbalanced-idr-management-at-hot-removal. - commit 725988c - kasan: update kasan_global for gcc 7 (syzkaller). - commit 18bb86c - kasan: support use-after-scope detection (syzkaller). - commit 5e37e6b ==== perl-Devel-StackTrace ==== Version update (2.01 -> 2.02) - updated to 2.02 see /usr/share/doc/packages/perl-Devel-StackTrace/Changes 2.02 2016-12-07 - Switch to GitHub Issues. - Some small pod fixes. ==== pitivi ==== Version update (0.97.1 -> 0.98) Subpackages: pitivi-lang - Update to version 0.98: + Customizable keyboard shortcuts. + Used the warnings printed by GTK 3.22 to fix issues in the timeline widget. + Lots of bug fixing, mostly on the timeline. - Drop pitivi-git-is-optional.patch and pitivi-translate-appdata.patch: fixed upstream. ==== python-packaging ==== Version update (16.7 -> 16.8) - update to 16.8: * Fix markers that utilize ``in`` so that they render correctly. * Fix an erroneous test on Python RC releases. ==== python3-gst ==== Version update (1.8.3 -> 1.10.2) - Update to version 1.10.2: + No changes, version bump only. - Update to version 1.10.1: + No changes, versionbump only. - Changes from version 1.10.0: + Bugs fixed: bgo#772853. ==== wine ==== Version update (1.9.24 -> 2.0~rc1) Subpackages: wine-32bit - Updated to 2.0-rc1 development snapshot - Bug fix update of the Mono engine. - Support for IDN name resolution. - Many more Shader Model 5 operations. - Still more fixes in the regression tests. - Various bug fixes. - updated winetricks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20161209 released!
by Dominique Leuenberger 10 Dec '16

10 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: NetworkManager-openconnect (1.2.2 -> 1.2.4) bash clutter-gst (3.0.20 -> 3.0.22) colord (1.3.3 -> 1.3.4) corosync (2.4.1 -> 2.4.2) filesystem grep (2.26 -> 2.27) gstreamer (1.8.3 -> 1.10.2) gstreamer-plugins-bad (1.8.3 -> 1.10.2) gstreamer-plugins-base (1.8.3 -> 1.10.2) gstreamer-plugins-good (1.8.3 -> 1.10.2) gstreamer-plugins-ugly (1.8.3 -> 1.10.2) harfbuzz (1.3.3 -> 1.3.4) hwinfo (21.37 -> 21.38) libyui-ncurses-pkg (2.48.3 -> 2.48.4) ncurses rubygem-cfa (0.4.1 -> 0.4.2) rubygem-cfa_grub2 (0.5.2 -> 0.5.3) shim-leap vala (0.34.3 -> 0.34.4) yast2-bootloader (3.2.11 -> 3.2.12) yast2-installation (3.2.10 -> 3.2.11) yast2-network (3.2.15 -> 3.2.16) === Details === ==== NetworkManager-openconnect ==== Version update (1.2.2 -> 1.2.4) Subpackages: NetworkManager-openconnect-gnome - Update to version 1.2.4: + Split libnm-vpn-plugin-openconnect.so into a GTK-free core plugin usable by nmcli and a UI plugin for nm-applet and GNOME components. + Support NM_VPN_LOG_LEVEL environment variable to control debug logging from NetworkManager. + Support Juniper Network Connect / Junos Pulse Secure VPN. + Add Yubikey OATH support. + Added support for automatic login when all needed data is known. + Fixed support for IPv6-only VPNs. + Updated translations. ==== bash ==== Subpackages: bash-doc libreadline7 readline-devel readline-doc - Add upstream patch popd-offset-overflow.patch to fix boo#1010845 CVE-2016-9401: bash: popd controlled free (Segmentation fault) Remark: this is a simple Segmentation fault, no security risk ==== clutter-gst ==== Version update (3.0.20 -> 3.0.22) Subpackages: gstreamer-plugin-gstclutter-3_0 libclutter-gst-3_0-0 typelib-1_0-ClutterGst-3_0 - Update to version 3.0.22: + A couple of video sink fixes (crashes & not up-to-date data). + A bunch of content fixes. ==== colord ==== Version update (1.3.3 -> 1.3.4) Subpackages: colord-lang libcolord2 libcolorhug2 - Update to version 1.3.4: + New Features: - colord: . Add cd_color_rgb_from_wavelength(). . Add cd_spectrum_resample_to_size(). - colorhug: . Add commands for getting the device calibration spectra. . Increase the size of the EP0 transfer. . Support enabling the illuminants on the ColorHug+. + Bugfixes: - Fix a possible NULL dereference when talking to Spark devices. - Fix compile with -Wformat-signedness. - Fix possible division by zero if parsing /proc/cpuinfo fails. - Install the libcolordcompat.so in the main -libs package. ==== corosync ==== Version update (2.4.1 -> 2.4.2) - Corosync 2.4.1 still produces libvotequorum.so.7.0.0, just like Corosync 2.3.6.(bsc#1013842) added: disable-build-html-docs.patch upgrade to corosync-2.4.2: Man: Fix corosync-qdevice-net-certutil link man: mention qdevice incompatibilites in votequorum.5 Qnetd LMS: Fix two partition use case cfg: Prevents use of uninitialized buffer ==== filesystem ==== - change /etc/cups to mode 0755 by cherry-picking SLE change ==== grep ==== Version update (2.26 -> 2.27) - Update to grep 2.27 * grep no longer reports a false match in a multibyte, non-UTF8 locale like zh_CN.gb18030, with a regular expression like ".*7" that just happens to match the 4-byte representation of gb18030's \uC9, the final byte of which is the digit "7". * grep by default now reads all of standard input if it is a pipe, even if this cannot affect grep's output or exit status. * grep no longer mishandles ranges in nontrivial unibyte locales. * grep -P no longer attempts multiline matches. * grep -m0 -L PAT FILE now outputs "FILE". * To output ':' and tab-align the following character C, grep -T no longer outputs tab-backspace-':'-C, an approach that has problems if run inside an Emacs shell window. * grep -T now uses worst-case widths of line numbers and byte offsets instead of guessing widths that might not work with larger files. * grep no longer reads the input in a few more cases when it is easy to see that matching cannot succeed, e.g., 'grep -f /dev/null'. ==== gstreamer ==== Version update (1.8.3 -> 1.10.2) Subpackages: gstreamer-devel gstreamer-utils libgstreamer-1_0-0 libgstreamer-1_0-0-32bit typelib-1_0-Gst-1_0 - Update to version 1.10.2: + Minor bugfixes. + Updated translations. - Update to version 1.10.1: + Security-relevant bugfix in the vmnc decoder (no CVE). + Various bugfixes to playbin3/decodebin3. + Fix error at the end of playing any WAV file. + Fix usability of androidmedia plugin if the camera or sensor API is not available, but codecs are. + Handle redirections on PLAY, and missing control attribute in the RTSP source. + Various OpenGL related bugfixes and many, many more. + Bugs fixed: bgo#765662, bgo#773813, bgo#774044, bgo#774108. - Update to version 1.10.0: + Several convenience APIs have been added to make developers' lives easier. + A new GstStream API provides applications a more meaningful view of the structure of streams, simplifying the process of dealing with media in complex container formats. + Experimental decodebin3 and playbin3 elements which bring a number of improvements which were hard to implement within decodebin and playbin. + A new parsebin element to automatically unpack and parse a stream, stopping just short of decoding. + Experimental new meson-based build system, bringing faster build and much better Windows support (including for building with Visual Studio). + A new gst-docs module has been created, and we are in the process of moving our documentation to a markdown-based format for easier maintenance and updates. + A new gst-examples module has been create, which contains example GStreamer applications and is expected to grow with many more examples in the future. + Various OpenGL and OpenGL|ES-related fixes and improvements for greater efficiency on desktop and mobile platforms, and Vulkan support on Wayland was also added. + Extensive improvements to the VAAPI plugins for improved robustness and efficiency. + Lots of fixes and improvements across the board, spanning RTP/RTSP, V4L2, Bluetooth, audio conversion, echo cancellation, and more! + Bugs fixed: bgo#770627, bgo#772431, bgo#772571, bgo#772741, bgo#772851, bgo#773114, bgo#773319. + Updated translations. - Add pkgconfig(libunwind) BuildRequires: New dependency. - Add explicit pkgconfig BuildRequires for completeness. ==== gstreamer-plugins-bad ==== Version update (1.8.3 -> 1.10.2) Subpackages: libgstadaptivedemux-1_0-0 libgstbadaudio-1_0-0 libgstbadbase-1_0-0 libgstbadvideo-1_0-0 libgstbasecamerabinsrc-1_0-0 libgstcodecparsers-1_0-0 libgstgl-1_0-0 libgstmpegts-1_0-0 libgstphotography-1_0-0 libgsturidownloader-1_0-0 libgstwayland-1_0-0 - Update to version 1.10.2: + Bugs fixed: bgo#774624, bgo#774702, bgo#774851, bgo#774896, bgo#775048, bgo#775120, bgo#775127, bgo#775130. - Update to version 1.10.1: + Bugs fixed: bgo#773681, bgo#773313, bgo#774287, bgo#774328, bgo#774462. - Update to version 1.10.0: + Bugs fixed: bgo#758717, bgo#762717, bgo#769382, bgo#770528, bgo#770587, bgo#772330, bgo#772499, bgo#772503, bgo#772698, bgo#772699, bgo#772704, bgo#772706, bgo#772742, bgo#773026, bgo#773423, bgo#773540, bgo#773635, bgo#773720, bgo#772608. + Updated translations. - Rebase gstreamer-plugins-bad-patch-source.sh. - Package new plugins: musepack and timecode. - Replace disabled pkgconfig(slv2) BuildRequires with pkgconfig(lilv-0), and enabled it following upstream changes. Drop bcond_with lv2 and move built plugin to main package, all dependencies are now available in openSUSE. - Add disabled pkgconfig(graphene-1.0) BuildRequires, new optional dependency, not yet available in openSUSE. - Add pkgconfig(webrtc-audio-processing) BuildRequires: Build webrtcdsp plugin. - Conditionally apply translations-update-upstream BuildRequires and macro for non-openSUSE only. - Add pkgconfig(gstreamer-allocators-1.0), pkgconfig(libdrm) and pkgconfig(libkms) BuildRequires: Build new kmssink plugin, mainly targeted for embedded systems. ==== gstreamer-plugins-base ==== Version update (1.8.3 -> 1.10.2) Subpackages: libgstallocators-1_0-0 libgstapp-1_0-0 libgstaudio-1_0-0 libgstaudio-1_0-0-32bit libgstfft-1_0-0 libgstpbutils-1_0-0 libgstriff-1_0-0 libgstrtp-1_0-0 libgstrtsp-1_0-0 libgstsdp-1_0-0 libgsttag-1_0-0 libgsttag-1_0-0-32bit libgstvideo-1_0-0 libgstvideo-1_0-0-32bit typelib-1_0-GstAudio-1_0 typelib-1_0-GstPbutils-1_0 typelib-1_0-GstTag-1_0 typelib-1_0-GstVideo-1_0 - Update to version 1.10.2: + Bugs fixed: bgo#774911, bgo#774585, bgo#774902, bgo#775224. - Update to version 1.10.1: + Bugs fixed: bgo#773131, bgo#774322, bgo#774343, bgo#727802. - Update to version 1.10.0: + Bugs fixed: bgo#768763, bgo#772500, bgo#772501, bgo#772676, bgo#772855, bgo#773103, bgo#773105, bgo#773107, bgo#773181, bgo#773441. - Conditionally apply translations-update-upstream BuildRequires and macro for non-openSUSE only. - Disable aarch64-no-neon.patch: It needs a rebase, or may possibly be dropped as fixed upstream. ==== gstreamer-plugins-good ==== Version update (1.8.3 -> 1.10.2) Subpackages: gstreamer-plugins-good-extra - Update to version 1.10.2: + Bugs fixed: bgo#757292, bgo#774428, bgo#774834, bgo#774859, bgo#774897, bgo#775219. - Update to version 1.10.1: + Bugs fixed: bgo#769765, bgo#770568, bgo#772610, bgo#773269, bgo#773512, bgo#773515, bgo#773516, bgo#773784, bgo#773861, bgo#774507, bgo#774556. - Update to version 1.10.0: + Bugs fixed: bgo#762207, bgo#772496, bgo#772497, bgo#772644, bgo#772656, bgo#773509, bgo#773580, bgo#773582, bgo#773643. + Updated translations. - Conditionally apply translations-update-upstream BuildRequires and macro for non-openSUSE only. - Drop gstreamer-plugins-good-wavparse.patch: Fixed upstream. - Stop passing --enabel-gtk to configure, no longer needed nor recognized. - Move monoscape plugin to extra subpackage as it is an experimental plugin. ==== gstreamer-plugins-ugly ==== Version update (1.8.3 -> 1.10.2) - Update to version 1.10.2: + Bugs fixed: bgo#774846, bgo#775070. - Update to version 1.10.1: + Meson update. + Updated translations. - Update to version 1.10.0: + Bugs fixed: bgo#773114, bgo#772159, bgo#770158, bgo#769610, bgo#769418, bgo#765807, bgo#769116, bgo#763082. + Updated translations. ==== harfbuzz ==== Version update (1.3.3 -> 1.3.4) Subpackages: harfbuzz-devel libharfbuzz-icu0 libharfbuzz0 libharfbuzz0-32bit - Update to version 1.3.4: + Fix vertical glyph origin in hb-ot-font. + Implement CBDT/CBLC color font glyph extents in hb-ot-font. ==== hwinfo ==== Version update (21.37 -> 21.38) Subpackages: hwinfo-devel - increase version - simplify code in smbios_get_info() - look for smbios entry point also in efi settings (bsc#1010276) - 21.38 ==== libyui-ncurses-pkg ==== Version update (2.48.3 -> 2.48.4) - Sort pkg list case-insensitively (bsc#1012294) - Prevent double sorting (widget sorts by itself) - 2.48.4 ==== ncurses ==== Subpackages: libncurses5 libncurses6 libncurses6-32bit ncurses-devel ncurses-utils tack terminfo terminfo-base - Add ncurses patch 20161126 + modify linux-16color to not mask dim, standout or reverse with the ncv capability -TD + add 0.1sec mandatory delay to flash capabilities using the VT100 reverse-video control -TD + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6 entry, to avoid conflict with the user-defined mapping. The reset feature will use ISO-8859-1 in any case (Mikulas Patocka). + improve check in tic for delays by also warning about beep/flash when a delay is not embedded, or if those use the VT100 reverse video escape without using a delay. + minor fix for syntax-check of delays from 20161119 changes. + modify trace() to avoid overwriting existing file (report by Maor Shwartz). - Add ncurses patch 20161112 + improve -W option in tic/infocmp: + correct order of size-adjustments in wrapped lines + if -f option splits line, do not further split it with -W + begin a new line when adding "use=" after a wrapped line - Add ncurses patch 20161119 + add check in tic for some syntax errors of delays, as well as use of proportional delays for non-line capabilities. + document history of the clear program and the E3 extension, prompted by various discussions including http://unix.stackexchange.com/questions/87469/clearing-the-old-scrollback-b… ==== rubygem-cfa ==== Version update (0.4.1 -> 0.4.2) - Improve deletion of elements in the augeas parser (needed to fix ntp-client, bsc#983486) - 0.4.2 ==== rubygem-cfa_grub2 ==== Version update (0.5.2 -> 0.5.3) - Use correct configuration file for xen kernel parameters (bsc#1012503) - 0.5.3 ==== shim-leap ==== - New signature from Microsoft - shim-install : fix regression of password prompt (bsc#993764) - Add shim-bsc991885-fix-sig-length.patch to fix the signature length passed to Authenticode (bsc#991885) - Update shim-bsc973496-mokmanager-no-append-write.patch to try append write first - Add shim-update-openssl-1.0.2h.patch to update openssl to 1.0.2h - Bump the requirement of gnu-efi due to the HTTPBoot support - Add shim-httpboot-support.patch to support HTTPBoot - Add shim-update-openssl-1.0.2g.patch to update openssl to 1.0.2g and Cryptlib to 5e2318dd37a51948aaf845c7d920b11f47cdcfe6 - Drop patches since they are merged into shim-update-openssl-1.0.2g.patch + shim-update-openssl-1.0.2d.patch + shim-gcc5.patch + shim-bsc950569-fix-cryptlib-va-functions.patch + shim-fix-aarch64.patch - Refresh shim-change-debug-file-path.patch - Add shim-bsc973496-mokmanager-no-append-write.patch to work around the firmware that doesn't support APPEND_WRITE (bsc973496) - shim-install : remove '\n' from the help message (bsc#991188) - shim-install : print a message if there is no valid EFI partition (bsc#991187) - shim-install : support simple MD RAID1 target devices (FATE#314829) - Add shim-fix-aarch64.patch to fix compilation on AArch64 (bsc#978438) - shim-install : fix typing ESC can escape to parent config which is in command mode and cannot return back (bsc#966701) - shim-install : fix no which command for JeOS (bsc#968264) ==== vala ==== Version update (0.34.3 -> 0.34.4) Subpackages: libvala-0_34-0 - Update to version 0.34.4: + Bug fixes. ==== yast2-bootloader ==== Version update (3.2.11 -> 3.2.12) - stop failing with new cfa ( caused by deleting nil, change in cfa needed for bsc#983486 ) - 3.2.12 ==== yast2-installation ==== Version update (3.2.10 -> 3.2.11) - Do not crash when the proposal screen is configured through an AutoYaST profile and tabs are not being used (bsc#1013976) - 3.2.11 ==== yast2-network ==== Version update (3.2.15 -> 3.2.16) - bnc#1013684 - do not crash with internal error when setting static setup for newly added device - 3.2.16 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] sporadic failure of SuSEfirewall2_init during boot
by Michael Andreas Buchberger 10 Dec '16

10 Dec '16

Hi, "systemctl -l status SuSEfirewall2_init" shows: SuSEfirewall2_init.service - SuSEfirewall2 phase 1 Process: 485 ExecStart=/usr/sbin/SuSEfirewall2 boot_init (code=exited, status=1/FAILURE) SuSEfirewall2[485]: mktemp: failed to create file via template ‘/tmp/ SuSEfirewall2_iptables.XXXXXXXX’: Read-only file system [ service restart successful ] The journal shows: SuSEfirewall2_init.service: Main process exited, code=exited, status=1/FAILURE before systemd[1]: Started Remount Root and Kernel File Systems. And does a later separate mount of /tmp (via fstab) conflict with SuSEfirewall2_init? Greetings mab KDE-Plasma-Version: 5.8.4 KDE-Frameworks-Version: 5.28.0 Qt-Version: 5.7.0 Kernel-Version: 4.8.12-1-default -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Improving IO with Sata HDD
by Marco Calistri 09 Dec '16

09 Dec '16

Dears Tumbleweed users, gurus and hackers, I would like to get some suggestions by more skilled people in order to improve my low IO disk performance because sometimes by using iotop I can see over 99% of disk activity especially when running VirtualBox and packagekit is updating the system. HDD activity led is always on during high IO activity and system sometimes get unresponsive or in the better case very very slow. I tried to change one ext4 parameter from [cfq] to [noop] without any noticeable improvements. sudo echo noop > /sys/block/sda/queue/scheduler Would like to know if I can try some other tuning. My HDD is an ATA 465,8G SAMSUNG HM501II ext4 Many thanks and regards! Cheers, -- Marco Calistri Opensuse Tumbleweed 64 bit - Kernel 4.7.0-2-default Gnome 3.20 Intel® Core™ i5-2410M CPU @ 2.30GHz × 4 - Intel® Sandybridge Mobile

12 30

[opensuse-factory] Can I symlink VirtualBox from SSD to second drive
by Roman Bysh 09 Dec '16

09 Dec '16

Hi everybody, Is it possible to symlink VirtualBox and VMware Player/Workstation Pro so that virtual drives are saved to a second 1TB hard drive? I'm trying symlink folder to folder. /mantrid/VirtualBox VMs /data/VirtualBox VMs and /var/lib/vmware/Shared VMs /data/vmware -- Cheers! Roman IRC: 551368250 ==============

4 16

[opensuse-factory] BFQ [was: Improving IO with Sata HDD]
by Greg Freemyer 09 Dec '16

09 Dec '16

On Fri, Dec 9, 2016 at 7:05 AM, Marco Calistri <mcalistri(a)hotmail.com> wrote: <snip> > Anyhow with bfq scheduler is accettable this is a notebook and not a > multi-core 24x8 server ;-) > Cheers, > Marco Seems BFQ should be part of one of the main patterns? http://algo.ing.unimo.it/people/paolo/disk_sched/ It claims some distro's are defaulting to BFQ as their i/o scheduler. "BFQ is the default I/O scheduler in Manjaro, Mageia, OpenMandriva, Sabayon, Arch Linux ARM (for Marvell Kirkwood) and ROSA, as well as in the Zen Kernel, the pf-kernel, CyanoGenMod for several devices, and many kernels for smartphones. In addition, BFQ is optionally available in Arch, openSUSE, PCLinuxOS and Gentoo." Greg -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] openSUSE Tumbleweed – Review of the Week 2016/49
by Dominique Leuenberger / DimStar 09 Dec '16

09 Dec '16

Dear Tumbleweed users and hackers, I’m sure nobody doubted it, but Tumbleweed is back on the roll! And in fact, we did the impossible and released 8 snapshots in a week. This review will cover {1201..1208}. Interesting updates delivered this week: * Linux Kernel 4.8.12 * Kernel Firmware 20161130 * Mesa 13.0.2 * More drivers updated for X.org 1.19.0 * Emacs 25.1 – now with webkit support * Preparations for systemd 232 and GTK 4; no impact (yet) That already gave some hints on what is coming your way and what is currently being worked on: * X.org 1.19.0 – Apparently there are some issues with switching between Text and GUI mode * Systemd 232 – Staging just started. Let’s be surprised * GTK 4.0 (3.89.0) is in the pipeline. It is parallel-installable to GTK2 and GTK3 * krb5 1.15 – supporting AES-SHA2 * Linux Kernel 4.8.13 (or newer) * KDE Applications 16.12.0 (currently 16.11.90 in Staging to iron out issues) Have a fun weekend ahead - and if you have time, help looking into the issues in the various Stagings (nothing scary at the moment) Cheers, Dominique

1 0

[opensuse-factory] unresolvable as nodejs-npm from npm4 and npm6
by Normand 09 Dec '16

09 Dec '16

There are few packages that are failing in TW because of nodejs-npm provided by npm4 and npm6. I assume we need to add a "Prefer: ..." line for related Factory project. Which one to be set ? (1) https://build.opensuse.org/project/monitor/openSUSE:Factory?arch_x86_64=1&d… === have choice nodejs-npm needed by ...: npm6 npm4 === -- Michel Normand -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] New Tumbleweed snapshot 20161208 released!
by Dominique Leuenberger 09 Dec '16

09 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: drbd drbd-utils kernel-firmware (20161121 -> 20161130) libmwaw (0.3.8 -> 0.3.9) mozilla-kde4-integration polkit-default-privs python-pyparsing python3-setuptools (29.0.1 -> 30.2.0) ucode-intel (20160714 -> 20161104) zlib === Details === ==== drbd ==== Subpackages: drbd-kmp-default - Excluded openSUSE from RT KMP build (bsc#1005578) - Enabled RT KMP build (bsc#1005578) ==== drbd-utils ==== - bsc#1006105, initialize node id when creating md. - Add patch initialize-node-id-when-create-md.patch ==== kernel-firmware ==== Version update (20161121 -> 20161130) Subpackages: ucode-amd - Update to version 20161130: * linux-firmware: update BYT audio firmware * rtlwifi: Add updates for RTL8723BE and RTL8821AE * linux-firmware: Update firmware patch for Intel Bluetooth 7265 (C0) * linux-firmware: Update firmware patch for Intel Bluetooth 7265 (D1) * linux-firmware: Update firmware patch for Intel Bluetooth 7260 (B5/B6) * linux-firmware: Update firmware file for Intel Bluetooth 8260 * linux-firmware: Update firmware file for Intel Bluetooth 8265 ==== libmwaw ==== Version update (0.3.8 -> 0.3.9) - Version update to 0.3.9: * Various warning and clang fixes all around ==== mozilla-kde4-integration ==== - Expand macro kde4_runtime_requires only when its available to fix quilt setup ==== polkit-default-privs ==== - adding org.freedesktop.login1.set-self-linger (bsc#1009468) ==== python-pyparsing ==== - Fix SLE 11 build. ==== python3-setuptools ==== Version update (29.0.1 -> 30.2.0) - update to version 30.2.0: * #854: Bump to vendored Packaging 16.8. - update to version 30.1.0: * #846: Also trap 'socket.error' when opening URLs in package_index. * #849: Manifest processing now matches the filename pattern anywhere in the filename and not just at the start. Restores behavior found prior to 28.5.0. - changes from version 30.0.0: * #864: Drop support for Python 3.2. Systems requiring Python 3.2 support must use 'setuptools < 30'. * #825: Suppress warnings for single files. * #830 via #843: Once again restored inclusion of data files to sdists, but now trap TypeError caused by techniques employed rjsmin and similar. ==== ucode-intel ==== Version update (20160714 -> 20161104) - Update to version 20161104. ==== zlib ==== Subpackages: libz1 libz1-32bit zlib-devel - Include fixes for bnc#1003580 bnc#1003579 bnc#1003577: * zlib-bnc1003577.patch * zlib-bnc1003579-part2.patch * zlib-bnc1003579.patch * zlib-bnc1003580.patch -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Install of leap behind a squid-proxy
by Reichelt, Joachim 08 Dec '16

08 Dec '16

Can someone tell me how to enable dhcp AND http_proxy during install/update of leap. Mit freundlichen Grüßen Joachim Reichelt ________________________________ Helmholtz-Zentrum für Infektionsforschung GmbH | Inhoffenstraße 7 | 38124 Braunschweig | www.helmholtz-hzi.de Das HZI ist seit 2007 zertifiziertes Mitglied im "audit berufundfamilie" Vorsitzende des Aufsichtsrates: MinDir’in Bärbel Brumme-Bothe, Bundesministerium für Bildung und Forschung Stellvertreter: MinDirig Rüdiger Eichel, Niedersächsisches Ministerium für Wissenschaft und Kultur Geschäftsführung: Prof. Dr. Dirk Heinz Gesellschaft mit beschränkter Haftung (GmbH) Sitz der Gesellschaft: Braunschweig Handelsregister: Amtsgericht Braunschweig, HRB 477 N��r��y隊Z)z{.��r�+�맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.��r�+��0��Ǩ�

4 5

[opensuse-factory] Attribute "openSUSE:UpstreamVersion": not authorized to edit
by Bernhard Voelker 08 Dec '16

08 Dec '16

The value of this attribute doesn't seem to get updated regularly, but neither of changing it manually or deleting (for creating it again after that) is permitted. Who can update (or delete) it? e.g. https://build.opensuse.org/attribs/Base:System/coreutils Thanks & have a nice day, Berny -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] Build Check Statistics
by Sebastian Riedel 08 Dec '16

08 Dec '16

Hi everyone, I've recently been working on a tool that lnussel requested (https://progress.opensuse.org/issues/13148), it aggregates rpmlint errors and warnings for Factory and Leap 42.3. http://rpmlint.opensuse.org The code is open source, and it's a rather clean Mojolicious application. https://github.com/openSUSE/build-check-statistics If you find any bugs or have ideas for improving it, please open an issue or send a pull request. Hope you like it! -- sebastian -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] New Tumbleweed snapshot 20161207 released!
by Dominique Leuenberger 08 Dec '16

08 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: atkmm1_6 cairomm1_0 glibmm2_4 gnome-software (3.22.2 -> 3.22.3) gtkmm2 gtkmm3 libgsf (1.14.40 -> 1.14.41) pangomm1_4 === Details === ==== atkmm1_6 ==== - rectify rpm groups - Rename to atkmm1_6: atkmm 2.25.x brings a new API/ABI to be used in GTK4 based applications. ==== cairomm1_0 ==== - Rename to cairomm1_0: legacy package with the 1.0 API. The existing package 'cairomm' will remain to be the 'latest' version. ==== glibmm2_4 ==== Subpackages: libgiomm-2_4-1 libglibmm-2_4-1 - Rectify RPM groups, replace old macros. - Rename to glibmm2_4, making space for glibmm2 to be available for the 2.52 ABI. The two versions are ready to live side-by-side. ==== gnome-software ==== Version update (3.22.2 -> 3.22.3) - Update to version 3.22.3: + Misc. fixes to the search results page. + Misc. flatpak bug and crasher fixes. + Correctly raise the codec search window under the Wayland session. + Improve spinner state handling on the updates page. + Make it possible to upgrade two Fedora versions at a time. + Fix a memory leak with every search request. + Don't show screenshot placeholder for add-ons that can't have screenshots. + Show an error if the screenshot download fails. + Get the screenshot metadata from the GNOME Shell Extension JSON data. ==== gtkmm2 ==== - Rectify RPM groups and replace old macros. ==== gtkmm3 ==== - Rectify RPM groups and replace old macros. ==== libgsf ==== Version update (1.14.40 -> 1.14.41) Subpackages: gsf-office-thumbnailer libgsf-1-114 libgsf-devel typelib-1_0-Gsf-1 - Update to version 1.14.41: + Fix corrupted-tar-file crash. ==== pangomm1_4 ==== - Rectify RPM groups and replace old macros. - Rename to pangomm1_4 (1.4 referecing the ABI/API version). Legacy package to stay around, while pangomm gets a new ABI/API. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] why doesn't opensuse include dkms?
by L. A. Walsh 08 Dec '16

08 Dec '16

In looking at the latest version of Vbox, they mention that all of the rpm based distros can use dkms to keep their Vbox in sync with whatever kernel is installed -- *except*, opensuse, which doesn't have dkms. I was wondering why opensuse stands out as not including this handy package for auto-rebuilding out-of-tree kernel modules as part of the distro? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 10

[opensuse-factory] New Tumbleweed snapshot 20161206 released!
by Dominique Leuenberger 07 Dec '16

07 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: mozc (2.17.2313.102 -> 2.18.2612.102) tigervnc virt-viewer (4.0 -> 5.0) xf86-video-nv xf86-video-r128 xf86-video-sis xosview (1.16 -> 1.19) === Details === ==== mozc ==== Version update (2.17.2313.102 -> 2.18.2612.102) Subpackages: fcitx-mozc ibus-mozc ibus-mozc-candidate-window mozc-gui-tools - update 2.18.2612.102 * fixed unexpected size bloat of the APK * fixed duplicate candidates after undo * fixed suggestion-only user dictionary entry may not work * fixed abbreviation user dictionary entry may not work * fixed suppression word may not work * fixed single character noun user dictionary entry may not work - fcitx-mozc updated to 2.18.2612.102 * dropped patch: fcitx-mozc-2.17.2102.102.1.patch * added patch: fcitx-mozc-2.18.2612.102.1.patch - protobuf updated to 3.1.0 * dropped patch: protobuf-atomic.patch, upstreamed * dropped patch: protobuf-generic-atomic.patch, upstreamed - gyp updated to latest master@940a15e - added patch: mozc-gen_zip_code_seed_py.patch ==== tigervnc ==== - U_Add-xorg-xserver-1.19-support.patch * Add xorg-xserver 1.19 support ==== virt-viewer ==== Version update (4.0 -> 5.0) - Update to virt-viewer version 5.0 virt-viewer-5.0.tar.bz2 - Don?t retry authentication when credentials are provided via vvfile - Fix display of guest name in title for VNC - Fix detection of domain stop when tunnelling over SSH - Fix problem resizing with GTK client side decorations - Fix leak on file transfer - Only include native spec file in dist to fix rpmbuild -ta - Check min required spice-glib version - Display errors to user if failing to open UNIX socket - Simplify file transfer UI to only display overall progress, rather than full list of files - Show list of files which failed to transfer - Dropped 35e489d5-fix-display-of-guest-name-in-title-for-vnc.patch 813c775c-fix-filename-leak-on-transfer-dialog.patch a62827d2-close-when-seeing-domain-stop-event.patch - bsc#983689 - virt-viewer shows Domain-0 on list of virtual machines virtview-dont-show-Domain-0.patch - Upstream bug fix 813c775c-fix-filename-leak-on-transfer-dialog.patch - Use source URL - Remove redundant %clean section - bsc#988858 - SLES12-SP2-Beta4 - virt-viewer throws Gtk-WARNING even with --quiet switch - Update to virt-viewer version 4.0 virt-viewer-4.0.tar.bz2 35e489d5-fix-display-of-guest-name-in-title-for-vnc.patch a62827d2-close-when-seeing-domain-stop-event.patch - Drop support for gtk2 builds - Require spice-gtk >= 0.31 - Require glib2 >= 2.38 - Require gtk3 >= 3.10 - Require libvirt-glib >= 0.1.8 - Increase minimum window size fo 320�200 instead of 50�50 - Remove use of GSLice - Don?t show usbredir button if not connected yet - Only compute monitor mapping in full screen - Don?t ignore usb-filter in spiec vv-file - Port to use GtkApplication API - Don?t leave window open after connection failure - Validate symbols from max glib/gdk versions - Don?t use GtkStock - Don?t use gtk_widget-modify_{fg,bg} APIs - Drop use of built-in eventloop in favour of libvirt-glib - Don?t open X display while parsing command line - Fix window title - Use GResource for building ui files into binary - Fix crash with invalid spice monitor mapping - Add dialog to show file transfer progress and allow cancelling - Remove unused nsis installer support - Include adwaita icon theme in msi builds - Add more menu mnemonics - Fix support for windows consoles to allow I/O redirection - Add support for ovirt sso-token in vv-file - Fix crash with zooming window while not connected - Remove custom auto drawer widget with GtkRevealer - Add appdata file for gnome software - Misc other bug fixes - Refresh translations - Dropped fix-crash-on-zoom-change.patch windows-keycombo.patch netware-keycombo.patch - bsc#982793 - virt-viewer installation create unusable launcher virtview-desktop.patch - bsc#979735 - Virt-viewer: Changing zoom on disconnected machine crashes application fix-crash-on-zoom-change.patch - Require at least glib2 >= 2.26 in pre-SLE12 builds - Update to virt-viewer version 3.1 virt-viewer-3.1.tar.bz2 - Last release to support GTK2 for Linux. The next 4.0 release will be GTK3 only - Don?t add URI scheme / path info to oVirt URIs - Require spice-gtk >= 0.30 - Enable webdav folder sharing with spice - Add preferences UI dialog - Take ?direct into account when checking if guest is reachable - Take SPICE proxy into account when connecting to oVirt instances - Fail gracefully when hostname is not returned by oVirt - Don?t show empty foreign menu on secondary displays - Avoid accidentally trying to connect to port 0 when oVirt doesn?t specify a port number - Correctly update geometry when enabling/disabling display heads - Avoid accidentally creating extra monitors when using configuration file monitor mapping - Exit normally when cancelling connect dialog - Don?t wait for a guest that we know will never show up - Fix crash when using ?reconnect with SPICE - Avoid zooming out if it would decrease window size below minimum required for top menu display - Fix crash when disabling last enabled display - Honour changes in display position from guest - Don?t show error dialog twice for unknown graphics type - Allow to cancel oVirt auth without error - Set sensitivity of display menu based on whether it is usable or not - Set sensitivity of tool bar buttons based on whether they are usable or not - Set guest name reported by VNC - Fix crash when using gtk-vnc 0.3.8 - Fix alt-tab behaviour in choose VM dialog - Don?t allow missing display in monitor mapping config - Add ?with-osid flag to configure to allow specifying the operating system build target. The values should be based on libosinfo OS short IDs. - Ensure windows installer places menu icon for all users not just admin. Requires manual uninstall of previous windows version - Require address in remote viewer connect dialog - Automatically retry VNC connection after auth failure - Drop GTK2 support for Windows builds - Enable keepalives on libvirt conncetion - Allow resize of window to arbitrary size - Fix thread safety handling event callbacks - Avoid deprecation warnings with newer glib - Pulled in multiple fixes for event loop from libvirt-glib - Fix misc bugs reported by coverity - Fix binary ID in MSI installer - Stop polling libvirt after reconnecting to libvirt - Drop old tarball virt-viewer-3.0.tar.bz2 - Update to virt-viewer version 3.0 virt-viewer-3.0.tar.bz2 - Last release to support GTK2 for Linux. The next 4.0 release will be GTK3 only - Don?t add URI scheme / path info to oVirt URIs - Require spice-gtk >= 0.30 - Enable webdav folder sharing with spice - Add preferences UI dialog - Take ?direct into account when checking if guest is reachable - Take SPICE proxy into account when connecting to oVirt instances - Fail gracefully when hostname is not returned by oVirt - Don?t show empty foreign menu on secondary displays - Avoid accidentally trying to connect to port 0 when oVirt doesn?t specify a port number - Correctly update geometry when enabling/disabling display heads - Avoid accidentally creating extra monitors when using configuration file monitor mapping - Exit normally when cancelling connect dialog - Don?t wait for a guest that we know will never show up - Fix crash when using ?reconnect with SPICE - Avoid zooming out if it would decrease window size below minimum required for top menu display - Fix crash when disabling last enabled display - Honour changes in display position from guest - Don?t show error dialog twice for unknown graphics type - Allow to cancel oVirt auth without error - Set sensitivity of display menu based on whether it is usable or not - Set sensitivity of tool bar buttons based on whether they are usable or not - Set guest name reported by VNC - Fix crash when using gtk-vnc 0.3.8 - Fix alt-tab behaviour in choose VM dialog - Don?t allow missing display in monitor mapping config - Add ?with-osid flag to configure to allow specifying the operating system build target. The values should be based on libosinfo OS short IDs. - Ensure windows installer places menu icon for all users not just admin. Requires manual uninstall of previous windows version - Require address in remote viewer connect dialog - Automatically retry VNC connection after auth failure - Drop GTK2 support for Windows builds - Enable keepalives on libvirt conncetion - Allow resize of window to arbitrary size - Fix thread safety handling event callbacks - Avoid deprecation warnings with newer glib - Pulled in multiple fixes for event loop from libvirt-glib - Fix misc bugs reported by coverity - Fix binary ID in MSI installer - Stop polling libvirt after reconnecting to libvirt - bsc#946816 - virt-viewer: version 2.0 can't connect to Xen VMs reverse-3d5627d7-for-xen.patch - Update to virt-viewer version 2.0 virt-viewer-2.0.tar.bz2 - Fix handling of zoom in/out accelerators - Fix warning going in/out of fullscreen - Add dialog showing info about the current guest - Change format of fullscreen config setting to allow for sparse guest displays - Write VM name to config file as a comment - Never use fallback CA certs when loading vv-file - Remove extraneous '/' from oVirt URIs - Support oVirt foreign menus - Allow using numapad for zoom in/out accelerators - Force geometry update when agent connects - Fix misc crash bugs - Fix misc memory leaks - Allow viewing of password entry characters - Don't fail when auth dialog is cancelled - Only create extra windows on demand - Use more sensible default window size - Improve docs for URIs and config files - Allow cancellation of SPICE auth dialog - Use new libvirt API for --attach to avoid SELinux AVC - Allow removable of CD images with oVirt connections - Show VM choose dialog when oVirt VM name is missing - Support usernames request with SASL auth - Use socat instead of nc if available - Use PNG instead of SVG for icons - Support connection to UNIX sockets instead of TCP - Honour zoom level from CLI args with VNC - Switch to GTK3 instead of GKT2 for Windows builds - Ensure dialogs have transient parent set - Switch to gstreamer 1.0 instead of 0.10 for Windows builds - Avoid accidentally connecting to localhost with VNC/SPICE - Use a versioned install directory for Windows builds - Dropped sources virt-viewer-1.0.tar.bz2 report-error.patch - Update to virt-viewer version 1.0 virt-viewer-1.0.tar.bz2 - Switched to 2-digit version numbering. - Improve error reporting when failing to find the GtkBuilder UI files - Honour title provided by SPICE server if available - Don't hide main window when disconnecting in multi-monitor configurations - Don't show VNC widget until authentication has completed - Fix session handling when re-authenticating - Improve docs for --attach flag - Ask for credentials for SPICE proxy - Fix scaling of windows when resizing - Remove 'Automatically resize' menu, leaving the behaviour permanently enabled - Improve USB icon in full screen toolbar - Don't resize guest when changing zoom level - Don't create windows at startup if kiosk mode isn't enabled - Don't show quit confirmation dialog in kiosk mode - Misc typos / fixes in man pages - Fix race with metacity window manager in fullscreen mode - Avoid accidentally connecting to localhost with --direct flag - Use custom log handler to silence debug messages on old glib2 - Fix tiny windows for secondary displays with gtk2 build - Take zoom into account when checkign display limits - Fix unshrinkable displays with windows guests - Allow ctrl-[+-] to zoom in fullscreen mode - Dropped upstream patches and old tarball virt-viewer-0.6.0.tar.bz2 52fa6455-display-warning-if-UI-file-fails.patch 52fce019-dont-free-session-if-auth-retry.patch 52fce019-dont-hide-main-window-when-disconnecting.patch 530b1cfc-german-translation-send-key-fix.patch 530b66e9-spice-ask-credentials-for-proxy.patch 53209ab7-fix-scaling-of-window-upon-resize.patch 53219d1a-silence-message-about-missing-config-file.patch 5322b75b-dont-show-quit-dialog-in-kiosk-mode.patch 5322b929-fix-building-with-older-spice-gtk.patch 538df41a-set-freed-variables-to-null.patch 5396d3dd-dont-connect-to-localhost-when-using-direct.patch 53970bee-remove-warning-when-removing-display.patch 53975d94-fix-tiny-windows-for-secondary-displays-in-gtk2-build.patch 5398b944-take-zoom-level-into-account-for-display-limits.patch 5398b971-fix-tiny-window-when-resetting-zoom-factor-in-gtk2-build.patch 53a8716d-fix-un-shrinkable-displays-on-windows-guests.patch - Drop spice-gtk.patch. It was only needed for systems with spice-gtk version < 0.22 - fix build: remove spice_uuid_to_string definition no more needed with the new spice-gtk - Upstream bug fixes 53970bee-remove-warning-when-removing-display.patch 53975d94-fix-tiny-windows-for-secondary-displays-in-gtk2-build.patch 5398b944-take-zoom-level-into-account-for-display-limits.patch 5398b971-fix-tiny-window-when-resetting-zoom-factor-in-gtk2-build.patch 53a8716d-fix-un-shrinkable-displays-on-windows-guests.patch - Switch build to gtk3 for SLE12 and openSUSE 13.2. - Update windows-keycombo.patch and netware-keycombo.patch to build with GTK 3. - Upstream bug fix 5396d3dd-dont-connect-to-localhost-when-using-direct.patch - Upstream bug fix 538df41a-set-freed-variables-to-null.patch - Drop patch as it causes initial viewer size problems 52fce019-set-VNC-display-ready-after-VNC-initialized.patch - Upstream bug fixes 530b66e9-spice-ask-credentials-for-proxy.patch 53209ab7-fix-scaling-of-window-upon-resize.patch 53219d1a-silence-message-about-missing-config-file.patch 5322b75b-dont-show-quit-dialog-in-kiosk-mode.patch 5322b929-fix-building-with-older-spice-gtk.patch - Upstream bug fixes 52fa6455-display-warning-if-UI-file-fails.patch 52fce019-dont-free-session-if-auth-retry.patch 52fce019-dont-hide-main-window-when-disconnecting.patch 52fce019-set-VNC-display-ready-after-VNC-initialized.patch 530b1cfc-german-translation-send-key-fix.patch - Update to virt-viewer version 0.6.0 * Require govirt 0.3.0 * Require spice-gtk 0.22 * Show error dialog if password is wrong * Document application/x-virt-viewer file format * Remove unused ?-d? option from remote-viewer * Add a kiosk mode * Add menu for sending Ctrl+Alt+Delete * Add Ctrl+Alt+End as accelerator for Ctrl+Alt+Delete * Send modifiers before the non-modifier key in send key menu * Fix GTK warning when disconnecting from VNC due to auth error * Make ?Cancel? default button in exit dialog * Make send key menu accelerators work in fullscreen * Remove insecure fetching of oVirt CA cert * Build for GTK 3 by default * Fix title bar after failed connection * Reshow remote-viewer connection dialog upon error * Hide all windows upon disconnect * Add ability to define custom monitor mapping * Ensure all windows obey command line zoom level * Add an icon to the desktop file * Fix event loop implementation on Win32 platforms * Misc other bug fixes - Allow the use of spice-gtk version 0.21. Drop patch when 0.22 becomes available. spice-gtk.patch - Renamed netcat.diff to netcat.patch - Enable spice support - Update to virt-viewer version 0.5.7 * Many fixes to full screen / window positioning handling * Reshow connect dialog if connection fails * Misc man page fixes * Mark RPM as obsoleting spice-client * Set the host subject to fix SSL connections with ovirt * Use -H as short variant of ?hotkeys * Add missing trailing ?;? in desktop file * Allow TLS only SPICE connections * Use dynamic key send menu * Enable smartcard shortcuts only when smartcard reader is present * Misc other bug fixes - Drop glade-keycombo.patch - Update to virt-viewer version 0.5.6 * Add ovirt:// support to remote-viewer (needs libgovirt) * Many fullscreen and multi-monitor fixes * Add a minimum version check in connection file * Fix sending key combinations from ?Send Key? menu when the key names are localized * Fix build with older glib and gtk+ * Fix MSI x64 build * Clean-ups (remove browser plugin entirely) - Update to virt-viewer version 0.5.5 * Improve screenshot saving dialog * remote-viewer learned to connect with a file of mime type application/x-virt-viewer, described in src/virt-viewer-file.c * Add a "do not ask me again" dialog checkbox when leaving * Add a MSI target, using https://live.gnome.org/msitools * Add windows debug helper, useful in Spice controller running context * Add remote-viewer --title STRING * Support for Spice proxy settings added * Numerous Spice display and multi-monitor fixes * win32, memory, build, and other misc fixes * Requires spice-gtk >= 0.16.26 - Enable virt-viewer to be built for s390x - Upstream bug fix virtview-git-transport-segv.patch - Upstream bug fixes virtview-git-ipv6-check.patch virtview-git-resize-window.patch virtview-git-spice-rounding.patch virtview-git-spice-resize-window.patch virtview-git-ssh-localhost-connect.patch - Update to virt-viewer version 0.5.4 * Fix host migration with Spice * Fix misc memory leaks * Fix build with newer glibc and -O0 * Improve automatic fullscreen Spice configuration * Avoid crash when quiting application * Rebuild display menu whenever a window is added/removed * Number displays starting from 1 instead of 0 * Add support for handling multiple monitors with Spice * Menu display menu insensitive if no displays can be selected * Use real binary name in remote-viewer help message * Document -f=auto-conf in remote-viewer help - fix build for SLE_11 * rework virtview-desktop patch - Update to virt-viewer version 0.5.3 * Add support for raw IPv6 addresses * Add a remote-viewer.desktop file and register spice:// handling * Add a simple connection dialog to remote-viewer * Add remote-viewer --fullscreen=auto-conf option, to update guest monitors configuration to match client * Spice controller support for disable-effects, color-depth and usbredir * Spice controller interaction fixes * Windows version and nsis installer improvements * Import newer translations from transifex * Misc reference leak / crash bugs fixed - Fix failure of viewer to close when guest is terminated virtview-git-vnc-close.patch - Additional upstream fix virtview-git-uri-crash.patch - Update to virt-viewer version 0.5.2 * Require libvirt > 0.9.7, spice-gtk > 0.11, spice-protocol >= 0.10.1 * Import newer translations from transifex * remote-viewer learned Spice controller customizable key bindings, smartcard property, and foreign menu * Fix Spice crash on re-connection * Fix connecting via ssh to a password-protected server * Add a sendkey menu in fullscreen mode * Add USB device selection in fullscreen mode * Misc reference leak / crash bugs fixed - Update to virt-viewer version 0.4.2 * Fix exports of signal functions for GTK UI builder on Windows * Avoid crash if xmlParseURI fails * Fix inverted test for SSH port that broke tunnelling * Don't hardcode port numbers for SSH if not requested by user * Fix deadlock in event handling * Fix initial zoom level for all windows * Fix window title to include domain name * Fix hostname used when XML gives a wildcard IP address * Fix window title when waiting for domain to appear * Fix key shortcust for F9-F12 menus * Always ask libvirt for its canonical URI * Allow build without GTK-VNC (ie spice only) * Require GTK-VNC >= 0.4.3 * Require SPICE-GTK >= 0.6.0 - Fix failure to resize viewer. Noted usually when tunneling via ssh virtview-git-emit-resize.patch - add automake as buildrequire to avoid implicit dependency - Always use canonical URI from libvirt connection virtview-git-canonical-uri.patch - Upstream bug fixes virtview-git-fn-key.patch virtview-git-window-wait.patch - Update to virt-viewer version 0.4.1 + Remove bogus use of AM_GLIB_GNU_GETTEXT macro to try to facilitate BSD builds + Support multiple monitors with SPICE and QXL drivers + Don't hardcode SSH port to 22 when tunnelling + Require SPICE-GTK >= 0.6 + Hide menu bar when going fullscreen + Support building against GTK2 or GTK3 + Convert from Glade to GtkBuilder + Honour 'listen' attribute from <graphics> XML when connecting + Fix reconnection after authentication failure + Make --verbose flag actually do something + Enable scaling with SPICE to match VNC behaviour + Rewrite widget resizing code to (try to) be more reliable + Fill extra space outside guest display with black + Fix (null) in title bar while not connected + Fix multiple memory leaks + Fix reconnecting to display with SPICE - Fixed error "Using GTK+ 2.x and GTK+ 3 in the same process is not supported" - Fixed spec file rpmlint warnings for language files. - Patch cleanup and re-enabled vnc-listen.patch - Fix re-connect after authentication failure virtview-reconnect-fix.patch - Fix "directories not owned by a package:" warnings. - Fix spec file for building with gtk-vnc 2.0 - Update to virt-viewer version 0.3.1 + Add support for Spice + Add support for spice resize-guest + Add support for zoom levels + Add a menu for zooming in/out of the virtual desktop. + Add a --zoom command line to set the initial zoom level. + Support connections over UNIX sockets - change buildreq to libpixman-1-0-devel - Update to virt-viewer 0.2.1 + Bug fixes + Translations - bnc#574591 - There is no prompt if I view a inexist guest OS using virt-viewer report-error.patch - Fixed the 'Send Key' menu with all the missing keys for netware and windows. glade-keycombo.patch - bnc#553633 - Update breaks menu access keys in virt-viewer and still misses some key sequences. This is a SLE10 bug fixed for SLE11. - Update to virt-viewer version 0.2.0 + Switch UI over to use Glade + Support graphical dialog for VNC and libvirt authentication + Resize window to match VNC desktop size where possible + Scale down VNC desktop if it cannot fit in host desktop space + Allow user to resize window to arbitrary size, scaling VNC + Fix blocking of accelerators + Allow automatic reconnect to a VM via --reconnect + Use libvirt events to detect when VM changes state + Wait for VM to appear if it does not exist + Fix plugin build with newer xulrunner + Port & build for Mingw32 target - bnc#522740 - SLES10SP3 Xen - Unable to install Netware OES2 6.5SP8 VM - bnc#448474 - Patch to enable keys that sends a NetWare server to the debugger. netware-keycombo.patch - bnc#499560 - Viirt-viewer needs ability to crash dump Windows VMs with Ctrl+Scroll+Scroll windows-keycombo.patch - Connect viewer to vnc-listen address specified in domain configuration (bnc#436629) vnc-listen.patch ==== xf86-video-nv ==== - U_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 ==== xf86-video-r128 ==== - U_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 ==== xf86-video-sis ==== - U_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 ==== xosview ==== Version update (1.16 -> 1.19) - Update to version 1.19 * Strip empty fields from the nlist. * arm64 doesn't have sys/io.h and sys/perm.h like many other Linux architectures * Fix typo that was blocking compilation on gcc 6 * Fix /sys/class/net traversal on recent Linux systems * Use right variable in error message. * Fix coretemp for AMD K10 CPUs on kernel >= 3.17. * Support coretemp on linux 3.15 * Do not parse error when 64-bit kernel is used with 32-bit userland * arm64 doesn't have sys/io.h and sys/perm.h like many other Linux architectures * Remove the Linux-specific 'MAP' field * Replace the parsing of /proc/meminfo * Fix spelling of "mandatory". * Add a command-line flag for cpuFormat: single * Change legend to match battery meter The battery meter is the more concise one. * Default IRQ meter to off * Strip empty fields from the nlist. * Fix name conflict. Local and member variable had the same name. * Initialize class member. * Silence a warning from debug code. * Use a helper to get the value of kstat_named_t. * Save the needed kstats in a centralized way. * Use sysconf instead of CPUMeter::countCpus(). * Show wireless meter when WLAN adapter is present. * Use c++ iostreams for console messages. * Remove two deprecated and unused functions. * Coding style cleanup (linux/intmeter). * Remove checks for kernel versions <= 2.0. * Port interrupt rate meter from BSDs to Linux. * Read net statistics from sysfs. * Drop support for kernels < 2.4 in netmeter. * Drop decimal from floats greater than 99.9 in used legends. * Show negative values in sensor meters. * Put value scaling code to base Meter class. * Rework coretemp's CPU detection. * Copy recent fieldmeter changes to bitfieldmeter. * Calculate total correctly. * Enable coretemp only on x86/x86_64. - Remove patches now upstream 0001-Replace-the-parsing-of-proc-meminfo.patch pull-request7.patch xosview-1.16-coretemp.patch xosview-1.16-coretemp2.patch xosview-1.16-serial.patch - Modify patch xosview-1.16-diskstat.patch - Port patches xosview-1.16-appdef.patch becomes xosview-1.19-appdef.patch xosview-1.16.dif becomes xosview-1.19.dif - Add upstream patch pull-request7.patch from pull request to avoid compiler error -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

Re: [opensuse-factory] Improving IO with Sata HDD
by Juan Erbes 07 Dec '16

07 Dec '16

2016-12-07 13:02 GMT-03:00 Marco Calistri <mcalistri(a)hotmail.com>: > > > From: Juan Erbes > Sent: 07/12/2016 13:49:12 (-0200 UTC) > To: Marco Calistri > Cc: Opensuse-factory > Subject: Re: [opensuse-factory] Improving IO with Sata HDD > > 2016-12-04 13:05 GMT-03:00 Marco Calistri <mcalistri(a)hotmail.com>: > > Il 04/12/2016 13:15, Daniele ha scritto: > > Il 04/12/2016 16:09, Anton Aylward ha scritto: > > On 12/04/2016 04:06 AM, Daniele wrote: > > I don't know if is a valid advise for TW but on os 13.2 I am using > the BFQ > scheduler. > > Do you mean CFQ? > http://www.phoronix.com/scan.php?page=news_item&px=cfq-io-scheduler-iops-li… > > Nope, BFQ ! > > https://www.phoronix.com/scan.php?page=news_item&px=BFQ-V8-Replacing-CFQ > > https://software.opensuse.org/package/bfq > > Bye, > Daniele. > > Daniele, > I installed available bfq as kernel module but so far I'm not noticing > any impressive performance. > I started three consoles, one Virtualbox guest (windowx XP) Thunderbird > and Firefox and I observed a long period of HDD high spinning and a bit > of system freezing. > I still have the parameter vm.swappiness=10 I don't know if I have to > set it as per default. > Anyhow I will let bfq scheduler activated for a week or two to see if it > is better or not for my installation. > marco@linux-turion64:~> cat /sys/block/sda/queue/scheduler > [bfq] noop deadline cfq > > > Hi! > > You forgot to tell us how much memory has your system. > > Because with less memory system You have higher IO on the hard disk. > > Regards, > Juan > > Hi Juan, > > I have 4G RAM and 8G SWAP. > This is the explanation because you has: "HDD activity led is always on during high IO activity and system sometimes get unresponsive or in the better case very very slow" Regards -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] sane-backends / hplip: enable more backends by default?
by Martin Wilck 07 Dec '16

07 Dec '16

Hi, I was just wondering why xsane on Tumbleweed detected no devices although I had a HPLIP scanner configured. The reason is simply that all backends are commented out in /etc/sane.d/dll.conf by default. Together with sane-backends- autoconfig, that may work well with USB scanners, but not with network scanners like mine. It's also in stark contrast with Fedora, where only 16 out of 88 sane backends are commented out in the shipped dll.conf (xsane startup "scanning for devices" takes about 5s in that configuration on my laptop, compared to roughly 2s when only the hplip/hpaio backend is enabled). I understand that users are supposed to run "yast2 scanner" to enable their scanner HW. That works, but I wouldn't call it a smooth user experience for my network scanner (none of the many HP scanners the tool offered matched mine even remotely - I knew it was fine to choose just any "hpaio" device, but would every user have known that with confidence)? AFAICS, the completed "yast2 scanner" run had no effect other than uncommenting "hpaio" in dll.conf. Here comes the question: Couldn't we improve the openSUSE user experience by enabling more sane-backends by default? Regards, Martin PS: for HPLIP and other "external" backends, it would be cleaner to register the backend in /etc/sane.d/dll.d rather than in /etc/sane/dll.conf directly, but that would require YaST support as well. -- Dr. Martin Wilck <mwilck(a)suse.com>, Tel. +49 (0)911 74053 2107 SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

[opensuse-factory] Leap 42.2 - getty service
by Axel Braun 07 Dec '16

07 Dec '16

Hi, I just noticed there is a getty process being restarted permanently: T520 systemd[1]: getty(a)getty.service: Service has no hold-off time, scheduling restart. T520 systemd[1]: Stopped Getty on getty. T520 systemd[1]: Started Getty on getty. T520 agetty[21783]: /dev/getty: cannot open as standard input: No such file or directory I just was aware of getty to pick up incoming faxes - and for sure no fax server is installed on the laptop. Can anyone explain what the getty process is good for, and whether it can be disabled? Thanks Axel PS: yes, there is an @opensuse.org mail address for me....maybe next time... -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 2

[opensuse-factory] New Tumbleweed snapshot 20161205 released!
by Dominique Leuenberger 07 Dec '16

07 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: coreutils (8.25 -> 8.26) iso-codes (3.65 -> 3.71) pciutils-ids (20161029 -> 20161121) perl-Config-IniFiles (2.93 -> 2.94) perl-YAML (1.19 -> 1.20) python-SecretStorage python-cryptography (1.5.3 -> 1.6) speedcrunch (0.11 -> 0.12) systemd-presets-branding-openSUSE vim (8.0.92 -> 8.0.102) vlc === Details === ==== coreutils ==== Version update (8.25 -> 8.26) - Update to 8.26 (for details see included NEWS file) - coreutils.spec (%description): Add b2sum, a new utility. (BuildRequires): Add timezone to enable new 'date-debug.sh' test. - coreutils-i18n.patch: Sync I18N patch from Fedora, as the diff for the old i18n implementation of expand/unexpand has become unmaintainable: git://pkgs.fedoraproject.org/coreutils.git - Remove now-upstream patches: * coreutils-df-hash-in-filter.patch * coreutils-diagnose-fts-readdir-failure.patch * coreutils-m5sum-sha-sum-fix-ignore-missing-with-00-checksums.patch * coreutils-maint-fix-dependency-of-man-arch.1.patch - Refresh/merge all other patches: * coreutils-invalid-ids.patch * coreutils-ocfs2_reflinks.patch * coreutils-remove_hostname_documentation.patch * coreutils-remove_kill_documentation.patch * coreutils-skip-gnulib-test-tls.patch * coreutils-sysinfo.patch * coreutils-tests-shorten-extreme-factor-tests.patch ==== iso-codes ==== Version update (3.65 -> 3.71) Subpackages: iso-codes-lang - Update to version 3.71: + Add short name of CZ to ISO 3166-1 and ISO 3166-2. + Updated translations for ISO 3166-1, ISO 3166-2 and ISO 4217. - Changes from version 3.70: + Update name for ES-SS in ISO 3166-2. + Updated translations for ISO 3166-1, ISO 3166-2 and ISO 639-2. - Changes from version 3.69: + Update name for PH-NEC and ES-BI in ISO 3116-2. + Updated translations for ISO 3166-1, ISO 3166-2, ISO 15924 and ISO 4217. - Changes from version 3.68: + Change long name of GM to ISO-3166-1. + Add changes for Lao in ISO 3166-2. + Updated translations for ISO 3166-1, ISO 3166-2, ISO 639-2, ISO 639-3, ISO 15924 and ISO 4217. - Changes from version 3.67: + The data is now included in JSON files. + The XML files are deprecated. + The gettext domains have been renamed to better match the actual ISO number; previously used gettext domains are linked to the new domain names. + A new ISO standard has been included: ISO 3166-3. + The standard ISO 4217 (currency names) now includes only the currently used currencies. Entries of withdrawn currencies are no longer included. + The standard ISO 639-5 now includes only the language families which are part of the official standard. The previously included languages were not part of the standard and have been removed. + ISO 639-3 has been updated from the latest upstream sources. + Updated translations for ISO 3166-1. - Changes from version 3.66: + start distributing JSON data files in /usr/share/iso-codes/json. + Updated translations for ISO 639-5. ==== pciutils-ids ==== Version update (20161029 -> 20161121) - Version update to 20161121 ==== perl-Config-IniFiles ==== Version update (2.93 -> 2.94) - updated to 2.94 see /usr/share/doc/packages/perl-Config-IniFiles/Changes ==== perl-YAML ==== Version update (1.19 -> 1.20) - updated to 1.20 see /usr/share/doc/packages/perl-YAML/Changes 1.20 Fri Dec 2 13:20:33 PST 2016 - Apply and amend PR/146 (quoted map keys) @preaction++ - B::Deparse is loaded at runtime now - New Feature $YAML::Preserve (Apply PR/9 @fmenabe++) ==== python-SecretStorage ==== - add test section ==== python-cryptography ==== Version update (1.5.3 -> 1.6) - update to 1.6 ==== speedcrunch ==== Version update (0.11 -> 0.12) - Update to 0.12: * user manual: in-app (with context help) and on-line * user-defined functions * complex numbers * unit support, including conversions * implicit multiplication * bitfield widget, for people who deal with binary math * virtual keypad is back * double-click to insert into editor is back * more color schemes, including Solarized alternatives * currency symbols are ignored, you can now safely paste them into the editor - Updated build requirements to Qt5. ==== systemd-presets-branding-openSUSE ==== - added snapper-cleanup.timer and snapper-timeline.timer (bsc#1011891) ==== vim ==== Version update (8.0.92 -> 8.0.102) Subpackages: gvim vim-data - Updated to revision 101, fixes the following problems * When the input or output is not a tty Vim appears to hang. * When a channel callback consumes a lot of time Vim becomes unresponsive. (skywind) * Can't build on MS-Windows. * Popup menu always appears above the cursor when it is in the lower half of the screen. (Matt Gardner) * Options that are a file name may contain non-filename characters. * Some options are not strictly checked. * (after 8.0.0101) cannot set 'dictionary' to a path - Updated to revision 95, fixes the following problems * Problems with GTK 3.22.2 fixed in 3.22.4. ==== vlc ==== Subpackages: libvlc5 libvlccore8 vlc-codec-gstreamer vlc-lang vlc-noX - Expand the lang_package macro in order to change the dependency to be on vlc-noX instead of vlc. USers of headless installed vlc might still be interested in translations too (boo#1012556). -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] "application(s)" are going to be [INSTALLED|REMOVED]
by Felix Miata 06 Dec '16

06 Dec '16

Several of these occur on what seems like nearly every zypper up or dup that occurs on an infrequent basis. The current up process I'm looking at was last performed 30 days ago, and consists of removal of Konsole and Marble. Firefox (or is it Mozilla Firefox, or is it MozillaFirefox) is another I see frequently. Why is it that "application" names that match program names representing installed rpms even exist in the first place, much less repeatedly get installed and removed? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

Re: [opensuse-kernel] Re: [opensuse-factory] Re: Tumbleweed and Realtek based wifi nics
by Moby 06 Dec '16

06 Dec '16

On 10/07/2016 05:27 AM, Matthias Brugger wrote: > > >>>>>> >>>>>> If you can bisect the kernel and point to a particular commit that >>>>>> causes the increased packet loss, that would be very helpful. I >>>>>> know of >>>>>> no changes to any of the Realtek drivers that would cause these >>>>>> kinds of >>>>>> problems. >>>>>> >>>>>> Larry >>>>>> >>>>> >>>>> Thanks Larry - I have some idea of bisecting software, but no idea in >>>>> regards to >>>>> the Tumbleweed. Where can I find the various commits/versions to test >>>>> as part >>>>> of the bisection? >>>> >>>> If openSUSE has a git repository for its kernels, I am not aware of its >>>> location. Perhaps someone will come up with that information. >>>> >>>> You could clone the mainline repository from >>>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git. Every >>>> change included in 4.7.X will be in that code. I would use the 4.7.5 >>>> configuration to build kernel 4.8 that is in that repo and test it. If >>>> you still get the packet loss, then use the commands 'git bisect start >>>> drivers/net/wireless/realtek/rtlwifi/', 'git bisect bad', and 'git >>>> bisect good v4.6'. Change that last one to whatever version you >>>> think is >>>> good. >>>> >>>> That bisection will have roughly 5 steps to finish and should not take >>>> too long, even with the full configuration used in distribution >>>> kernels. >>>> >>>> Larry >>>> >>>> >>> >>> I keep getting errors when trying to star the git bisect. >>> >>> Here is what I get: >>> >>> git clone git://kernel.opensuse.org/kernel.git -b stable >>> Cloning into 'kernel'... >>> remote: Counting objects: 6374859, done. >>> remote: fatal: inflateInit: out of memory (no message) >>> remote: aborting due to possible repository corruption on the remote >>> side. >>> fatal: early EOF >>> fatal: index-pack failed >>> >>> how can I get around this error, maybe a git option to not compress or >>> some such thing? >>> > > Strange, I don't get that error. > You can try https://github.com/openSUSE/kernel.git instead. > > Regards, > Matthias > >>> Thanks, >>> >>> --Moby >>> >> > Thanks Matthias, github.com/openSUSE/kernel.git worked just fine - I am working on doing the bisect with it now. -- --Moby -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 15

[opensuse-factory] New Tumbleweed snapshot 20161204 released!
by Dominique Leuenberger 05 Dec '16

05 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: ImageMagick (6.9.6.5 -> 6.9.6.6) MozillaThunderbird (45.5.0 -> 45.5.1) cheese flatpak (0.6.13 -> 0.6.14) kernel-source (4.8.11 -> 4.8.12) libarchive libgit2 (0.24.1 -> 0.24.3) libinput (1.5.1 -> 1.5.2) mutter npth (1.2 -> 1.3) ostree (2016.12 -> 2016.14) === Details === ==== ImageMagick ==== Version update (6.9.6.5 -> 6.9.6.6) Subpackages: ImageMagick-devel ImageMagick-extra libMagick++-6_Q16-6 libMagickCore-6_Q16-2 libMagickWand-6_Q16-2 perl-PerlMagick - updated to 6.9.6-6 * If a convenient line break is not found, force it for caption: (reference https://www.imagemagick.org/discourse-server/viewtopic.php?f=3&t=30887). * Off by 1 error when computing the standard deviation (reference https://www.imagemagick.org/discourse-server/viewtopic.php?f=2&t=30866). * Apply Debian patches, (reference https://github.com/ImageMagick/ImageMagick/issues/304). * Permit EPT images with just a TIFF or EPS image, not both (reference https://www.imagemagick.org/discourse-server/viewtopic.php?f=3&t=30921). * The -clone option no longer leak memory. - turn on make check along perl test ==== MozillaThunderbird ==== Version update (45.5.0 -> 45.5.1) Subpackages: MozillaThunderbird-translations-common - Mozilla Thunderbird 45.5.1: * CVE-2016-9079: SVG Animation Remote Code Execution (MFSA 2016-92, bsc#1012964, bmo#1321066) ==== cheese ==== Subpackages: libcheese-common libcheese-gtk25 libcheese8 - Move to the rpm group "Productivity/Multimedia/Other": This is more consistent with the place Cheese is represented in structured menus (like on KDE), where it is listed in "Multimedia" (extracted as a 'bug'/'annoyance' from a Leap 42.2 review). ==== flatpak ==== Version update (0.6.13 -> 0.6.14) - Update to version 0.6.14: + Update bundled bubblewrap to 0.1.4 which has some nice bugfixes. + Requires OSTree 2016.14, which allows us to drop some old workarounds. + When installing an application system-wide, don't consider dependencies that are installed for the user only. + Flatpak install --from now tries to re-use existing remotes to avoid creating unnecessary origin remotes. + Using --filesystem=$dir when $dir is a symlink-to-directory now works. + Using --filesystem=$file to expose unix sockets to the app is now allowed. + By default all the directories in ~/.var/app (except the app), as well as ~/.local/share/flatpak are hidden in the sandbox. + New option --filesystem=$dir:create which will create the destination if it did not previously exist. + --filesystem= now supports for xdg-[config|cache|data]. This allows you access to the host versions of these xdg dirs. Additionally if you use these with a subdirectory, like: - -filesystem=xdg-config/subdir then that subdirectory on the host will be shared with the per-app instance of the xdg-dir. + Builder now correctly handles app-ids that have dashes in them. Previously this generated invalid ids for the debuginfo and locale extensions. + The experimental OCI file format support was changed from creating an OCI container to creating an OCI image. + Fix regression where "flatpak update --appstream remotename" broke. ==== kernel-source ==== Version update (4.8.11 -> 4.8.12) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - Linux 4.8.12 (CVE-2016-7913 bnc#1012628 bsc#1010478 bsc#1000287). - Delete patches.apparmor/apparmor-fix-change_hat-not-finding-hat-after-policy-replacement.patch. - Delete patches.fixes/xc2028-Fix-use-after-free-bug-properly. - commit f8adb5a - drm/i915: Mark CPU cache as dirty when used for rendering (bnc#931300). - commit 04f28df - Fix bug reference in patches.fixes/Revert-ACPI-Execute-_PTS-before-system-reboot (bsc#1012220). - commit e617052 ==== libarchive ==== Subpackages: bsdtar libarchive-devel libarchive13 - fix extracting over symlinks: fix-extract-over-links.patch the problem is solved upstream different, but git master is too different atm. ==== libgit2 ==== Version update (0.24.1 -> 0.24.3) - libgit2 0.24.3, fixing the following vulnerabilities: * CVE-2016-8568, CVE-2016-8569: invalid memory accesses parsing object files (bsc#1003810) * various bug fixes from the 0.24.2 release ==== libinput ==== Version update (1.5.1 -> 1.5.2) Subpackages: libinput-udev libinput10 - Update to new upstream release 1.5.2 * Tweak the handling of touchpad deltas which leads to much more responsive pointer motion. * A custom quirk for the HP Zbook Studio G3 was added. ==== mutter ==== Subpackages: libmutter0 mutter-data - Add mutter-x11-meta.patch: Don't try setting unavailable scroll methods; libinput acts really bad on it (bgo#775337, bgo#771744, boo#1011356). ==== npth ==== Version update (1.2 -> 1.3) - update to 1.3: * Bypass npth_protect/npth_unprotect iff the library has not yet been initialized. * Improve detection of clock_gettime - use reproducible build timestamp ==== ostree ==== Version update (2016.12 -> 2016.14) - Update to version 2016.14: + otutil: Note that ot_log_structured takes a printf format. + libglnx: Bump to master (for -fsanitize fixes). + Distribute test scripts even if we wouldn't run them. + Distribute valgrind suppressions in tarballs. + Filter bootloader supplied kernel cmdline options. + repo: Don't put remote refs in the summary file. + pull: Don't do deltas with --commit-metadata-only. + pull: Add per-remote cookie jar. + remote: Add command to list cookies. + remote: Add commands to add and remove cookies for a remote. + OsreeFetcher: Treat 403 as not found. + trivial-httpd: Add support for checking cookies. + Update documentation for cookie handling commands. + deltas: Only keep one file open at a time during compilation. - Changes from version 2016.13: + pull: Add support for `http-headers` option. + pull: Redo logic for "scanning". + commit: Fix reading xattrs from OstreeRepoFile:s. + lib: Define and use cleanup functions for gpgme. + lib: Split out helper function to create GPG context. + Add "gpgkeypath" option to remotes. + lib: Add an API to GPG verify a commit given a remote. + pull: Do GPG verify commit objects when using deltas. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] VirtualBox build with X server 1.19.0
by Larry Finger 05 Dec '16

05 Dec '16

Dominique, I now have a patch for VB that builds with X server 1.19.0. Unfortunately, it breaks the build with v. 1.18.4. I do not know how to conditionally include a patch depending on the version of a required package, nor do I know how to pass that information to the build as an exported symbol. Accordingly, I have placed a requirement on the BuildRequires statement for xorg-x11-server. When I submit that change, the build will be blocked for everything but Project openSUSE:Factory:Staging:I:DVD, which started this whole mess. Is submitting an update that will block with v 1.18.4 and build for 1.19.0 the correct thing to do? Is there a better option? Thanks, Larry -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

6 8

[opensuse-factory] tumbleweed knode 64bit not available
by nicholas cunliffe 05 Dec '16

05 Dec '16

for tumbleweed only 32bit version 4.8.2 is available for leap 42.1 64bit version 4.14.10 is available -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

Re: [opensuse-factory] No Login after update in Tumbleweed
by Cneugeb＠web.de 05 Dec '16

05 Dec '16

On Mon, 2016-12-05 at 13:30 Dominique Leuenberger / DimStar wrote: > On Mon, 2016-12-05 at 13:06 +0100, Cneugeb(a)web.de wrote: >> Hello, after my last update I have no grafical login. A shell starts that is refreshed very fast. I can not login because the shell refreshes before I can enter login an password. Does anyone knows how to fix it? > That sounds like your graphical interface fails to actually launch (paired with a bug in gdm that does tries to respawn it to eagerly) Boot your system to single user mode (simply add '3' to the kernel command line, that still works) and extract the logs. Likely there was a kernel update in the mix for you and you need to re- install your binary graphics driver Cheers, Dominique Ok, that solved the problem. Tank you Dominique Cheers, Christian -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] No Login after update in Tumbleweed
by Cneugeb＠web.de 05 Dec '16

05 Dec '16

Hello, after my last update I have no grafical login. A shell starts that is refreshed very fast. I can not login because the shell refreshes before I can enter login an password. Does anyone knows how to fix it? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Tumbleweed snapshot 20161203 released!
by Dominique Leuenberger 05 Dec '16

05 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: MozillaFirefox (50.0 -> 50.0.2) autoyast2 (3.2.3 -> 3.2.4) binutils cmake (3.7.0 -> 3.7.1) doxygen emacs (24.5 -> 25.1) fcitx-qt5 (1.0.5 -> 1.0.6) file libyui-ncurses-pkg (2.48.2 -> 2.48.3) libyui-qt-pkg (2.45.11 -> 2.45.12) llvm3_8 open-vm-tools (10.0.7 -> 10.1.0) perl-Date-Manip (6.56 -> 6.57) virtualbox yast2 (3.2.6 -> 3.2.7) yast2-bootloader (3.2.10 -> 3.2.11) yast2-country (3.2.2 -> 3.2.3) yast2-network (3.2.11 -> 3.2.15) yast2-packager (3.2.9 -> 3.2.10) yast2-users (3.2.4 -> 3.2.6) === Details === ==== MozillaFirefox ==== Version update (50.0 -> 50.0.2) Subpackages: MozillaFirefox-translations-common - update to Firefox 50.0.2 * Firefox crashes with 3rd party Chinese IME when using IME text (50.0.1) security fixes (in 50.0.1): (boo#1012807) * MFSA 2016-91 CVE-2016-9078: data: URL can inherit wrong origin after an HTTP redirect (bmo#1317641) security fixes (in 50.0.2) (boo#1012964) * MFSA 2016-92 CVE-2016-9079: Use-after-free in SVG Animation (bmo#1321066) ==== autoyast2 ==== Version update (3.2.3 -> 3.2.4) Subpackages: autoyast2-installation - Fix building on s390x (bsc#1011489) - 3.2.4 ==== binutils ==== Subpackages: binutils-devel - Add refine_.cfi_sections_check_to_only_consider_compact_eh_frame.patch from upstream to fix an assembler problem with clang on ARM. Fixes https://sourceware.org/bugzilla/show_bug.cgi?id=20648 - Update binutils-2.27-branch.diff to include recent fixes from the branch. - Add binutils-2.27-fix-section-order.diff to restore monotonically increasing section offsets. - Remove qemu workaround from spec file, since qemu 2.5.0rc0 the length of the argument list is no longer limited to 128 kByte. ==== cmake ==== Version update (3.7.0 -> 3.7.1) - update to CMake 3.7.1 * FindBISON: Do not rebuild every time when not VERBOSE * libarchive: Add headers to adapt between OpenSSL 1.1 and older versions * libarchive: Add support for building with OpenSSL 1.1 * server-mode: Prevent possible crash when watching directories * server-mode: Reset GlobalGenerator before configure full changelog: https://blog.kitware.com/cmake-3-7-1-available-for-download/ ==== doxygen ==== - Fix: Add missing jquery.js, dynsections.js & optional svgpan.js to QCH file [bsc#1011331] + doxygen-fix-QCH-files.patch ==== emacs ==== Version update (24.5 -> 25.1) Subpackages: emacs-info emacs-nox emacs-x11 etags - Avoid address space randomization during emacs build - Check for active Execution Shield as this breaks emacs - Diable experimental cairo support as it cause trouble with spacemacs as well as with the w3 mode - Update to emacs version 25.1 * Next major release * Xwidgets: a new feature for embedding native widgets inside Emacs buffers. * Emacs can now load shared/dynamic libraries (modules). * Network security (TLS/SSL certificate validity and the like) * 'C-h l' now also lists the commands that were run. * New option 'switch-to-buffer-in-dedicated-window' * The option 'even-window-heights' has been renamed to 'even-window-sizes' * 'terpri' gets an optional arg ENSURE to conditionally output a newline. * 'insert-register' now leaves point after the inserted text * The new variable 'term-file-aliases' replaces some files from lisp/term. * New variable 'system-configuration-features', listing some of the main features that Emacs was compiled with. * A password is now hidden also when typed in batch mode. * The Emacs pseudo-random number generator can be securely seeded. * New input methods: 'tamil-dvorak', 'programmer-dvorak' and 'probhat'. * 'M-x' suggests shorthands and ignores obsolete commands for completion. * Changes in undo * New command 'comment-line' bound to 'C-x C-;'. * New and improved facilities for inserting Unicode characters * New minor mode 'global-eldoc-mode' is enabled by default. * Emacs now uses "bracketed paste mode" on text terminals that support it. * Emacs now supports the latest version of the UBA. * You can access 'mouse-buffer-menu' ('C-down-mouse-1') using 'C-f10'. * New buffer-local 'electric-pair-local-mode'. * New variable 'fast-but-imprecise-scrolling' inhibits fontification during full screen scrolling operations. * New documentation command 'describe-symbol'. * New function 'custom-prompt-customize-unsaved-options' checks for unsaved customizations and prompts user to customize (if found). * The old 'C-x w' bindings in 'hi-lock-mode' are officially deprecated * New function 'bookmark-set-no-overwrite' bound to 'C-x r M'. * Many other details, see /usr/share/emacs/25.1/etc/NEWS - Patch emacs-24.4.dif renamed to emacs-25.1.dif - Patches removed as now upstream or fixed otherwise debbugs16737.patch emacs-24-0010-ELF-unexec-Correct-section-header-index.patch emacs-24-0011-ELF-unexec-Tidy-code.patch emacs-24-0012-ELF-unexec-Merge-Alpha-and-MIPS-COFF-debug-handling.patch emacs-24-0013-ELF-unexec-Symbol-table-patching.patch emacs-24-0014-ELF-unexec-_OBJC_-symbols-in-bss-sections.patch emacs-24-0015-ELF-unexec-R_-_NONE-relocs.patch emacs-24-0016-ELF-unexec-Drive-from-PT_LOAD-header-rather-than-sec.patch emacs-24-0017-ELF-unexec-Don-t-insert-a-new-section.patch emacs-24-0018-src-unexelf.c-NEW_PROGRAM_H-Remove-unused-macro-Bug-.patch emacs-24-0019-ELF-unexec-align-section-header.patch emacs-24-fix-missing-gtk-icons.patch emacs-24.4-bzr118021.patch emacs24-primarysel2.patch gmalloc.patch - Patches forwarded to 25.1 emacs-24.1-ps-mule.patch emacs-24.3-asian-print.patch emacs-24.3-iconic.patch emacs-24.3-x11r7.patch emacs-24.4-flyspell.patch emacs-24.4-glibc.patch emacs-24.4-nonvoid.patch emacs-24.4-ps-bdf.patch emacs-24.4-xim.patch ==== fcitx-qt5 ==== Version update (1.0.5 -> 1.0.6) - update version 1.0.6 * [qt5]fix inconsistency between qstring and ucs4 string when handle surrounding * [qt5]fromUcs4 expect a null terminated string by default, give it a size * [qt5]use new connection syntax * [qt5]use more nullptr * [qt5]remove usage of QPointer in icdata * [qt5]don't crash if window->screen() is null ==== file ==== Subpackages: file-devel file-magic libmagic1 libmagic1-32bit - Modify patch file-5.29.dif that is replace colon with dot in offset (boo#1012779) ==== libyui-ncurses-pkg ==== Version update (2.48.2 -> 2.48.3) - Made menu hotkey unique for QA (bsc#1012604) - 2.48.3 ==== libyui-qt-pkg ==== Version update (2.45.11 -> 2.45.12) - Sort pkg list case-insensitively (bsc#1012294) - 2.45.12 ==== llvm3_8 ==== Subpackages: libLLVM3_8 libLLVM3_8-32bit - Disable building of libc++ and python-clang. These are provided by llvm 3.9 now. - Supplement emacs & vim instead of require them. ==== open-vm-tools ==== Version update (10.0.7 -> 10.1.0) Subpackages: libvmtools0 open-vm-tools-desktop - Remove building KMP modules. No longer needed or wanted for current releases. User space tool vmhgfs-fuse has replaced the need for vmhgfs kernel module. - Updated to 10.1.0 stable release (boo#1011057) + vmware-namespace-cmd command line utility. + gtk3 support + Common Agent Framework (CAF) + guest authentication with xmlsec1 + FreeBSD support + sub-command to push updated network information to the host on demand + udev rules for configuring SCSI timeouts in the guest + fixes for Ubuntu 16.10 + Fix for quiesced snapshot failure leaving guest file system quiesced + Fix for CVE-2015-5191 (bsc#1007600) - Dropped upstream patches included (or not necessary) in 10.1.0: + vmw-bitmask-gcc6.patch + no-unused-const.patch + enable-gcc46+.patch - Add udev rule to increase VMware virtual disk timeout values (bsc#994598) [99-vmware-scsi-udev.rules] ==== perl-Date-Manip ==== Version update (6.56 -> 6.57) - updated to 6.57 see /usr/share/doc/packages/perl-Date-Manip/Changes ==== virtualbox ==== Subpackages: virtualbox-guest-kmp-default virtualbox-guest-tools virtualbox-guest-x11 - Add patch file "vbox_hidpi_support.patch" to add support for HiDPI in the management frontend. (This does not fix rendering in guest windows) ==== yast2 ==== Version update (3.2.6 -> 3.2.7) - Enhanced PackagesProposal API to handle required and optional resolvables separately (bsc#885496) - 3.2.7 ==== yast2-bootloader ==== Version update (3.2.10 -> 3.2.11) - Recommends syslinux as it is often used by generic_mbr, but it is not hard requirement (bsc#1004229) - 3.2.11 ==== yast2-country ==== Version update (3.2.2 -> 3.2.3) Subpackages: yast2-country-data - Keyboard: Chinese and Taiwanese are using US keyboard layout for a default. That's why e.g. Chinese will be shown for keyboard settings although US will be taken. So we have to set the connection manually (like we have already for DK an DE). (bnc#1009914) - 3.2.3 ==== yast2-network ==== Version update (3.2.11 -> 3.2.15) - Linuxrc does not export some variables anymore and handles the configuration of network directly, for that reason, some methods or reponsibilities of InstallInfConvertor class are not needed being removed. - bnc#1012764 - made rpm architecture independent (noarch) - 3.2.15 - bnc#1012581 - do not crash with internal error stating undefined method when switching to "Hostname / DNS" tab when the system contains incorrect configuration of DHCLIENT_SET_HOSTNAME - 3.2.14 - bnc#1009931 - update item's overview with freshly edited values - 3.2.13 - bsc#984890 - new implementation of setting hostname via DHCP. User is allowed to set hostname via particular interface or set a reasonable default value for all interfaces. - bsc#1007172 (kanderssen(a)suse.com) - When an interface is enslaved in a bond the udev rule is modified using the bus_id instead of the mac address but some multiport cards could use the same bus_id. In such cases also the dev_port is needed. Taking this in account the dev_port will be added always when a udev rule based on bus_id is written. - 3.2.12 ==== yast2-packager ==== Version update (3.2.9 -> 3.2.10) - Mark the selected default patterns as optional so the user can change them without blocking the installation later (fixes openQA tests) (related to bsc#885496) - 3.2.10 ==== yast2-users ==== Version update (3.2.4 -> 3.2.6) - Set the focus to the first password field to keep the same behavior as before the last change. (for FATE#321754) - 3.2.6 - prepare reusable widget for setting root password (needed for FATE#321754) - 3.2.5 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] TW 20161201 radeon won't load for AGP rv250 FireGL
by Felix Miata 04 Dec '16

04 Dec '16

EE lines from log: [ 298.172] Current Operating System: Linux a-865 4.2.3-1-pae #1 SMP PREEMPT Mon Oct 12 11:32:29 UTC 2015 (202286f) i686 (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 298.182] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 298.197] (EE) open /dev/dri/card0: No such file or directory [ 298.197] (EE) open /dev/dri/card0: No such file or directory [ 298.198] (EE) open /dev/fb0: No such file or directory [ 298.198] (EE) open /dev/fb0: No such file or directory [ 298.198] (EE) Screen 0 deleted because of no matching config section. [ 298.198] (EE) Screen 0 deleted because of no matching config section. [ 298.198] (EE) Screen 0 deleted because of no matching config section. [ 310.160] (EE) AIGLX: reverting to software rendering Full log: http://fm.no-ip.com/Tmp/Linux/Xorg/xorg.0.log-rv250-firegl-vesa1280x1024 Can anyone explain why? 1-radeon isn't working 2-why /dev/dri/card0 is missing 3-why /dev/fb0 is missing -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 7

[opensuse-factory] Leap 42.2 - plasmashell freezing
by mh＠mike.franken.de 04 Dec '16

04 Dec '16

Hi *, on one of my machines (Lenovo T420 notebook) I have a problem with plasmashell freezing often when a notification is shown. The notification frame shows up, but no content and then the complete desktop freezes. Killing and restarting plasmashell cures the problem for a short time - til one of the the next notifications wants to display something. It doesn't happen for all notifications, though. Using tools like notify-send the problem can not be reproduced, but notifications stemming from plasma-nm and plasma-workspace itself (like the one for a removed plasmoid) always lead to the freeze. The system originally was openSuSE Leap 42.2, but because of the problem I upgraded step by step to - the latest kernel from the kernel stable repo, - the latest X server plus everyting from the X11:Xorg repo - and the latest plasma workspace including everything from the KDE:Framework5 repo. The problem remained unchanged, though. A few more facts: - The X server is xf86-video-intel. - Switching off the compositor doesn't help either. - Everything worked with Leap 42.1 - No according entry in the journal or .xsession-errors* can be found. - And a curiosity: After removing .config/plasmarc and restarting plasmashell the problem vanishes for a few hours or even a day, before it comes back. - Logging off or restarting the machine doesn't help in case the problems exists at that time. In found a few bug reports for plasma freezes, but none of them seems to fit exactly. Is this a known problem? Can I debug it and if so, how? TIA. Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

9 16

[opensuse-factory] New Tumbleweed snapshot 20161202 released!
by Dominique Leuenberger 04 Dec '16

04 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: Mesa (13.0.1 -> 13.0.2) amarok ffmpeg (3.2 -> 3.2.1) git (2.10.2 -> 2.11.0) irqbalance ispell k3b libteam (1.22 -> 1.26) libuv (1.10.0 -> 1.10.1) libvorbis lxpanel obs-service-tar_scm (0.6.1.1473925745.c5264bb -> 0.7.0.1480000004.4027270) openSUSE-build-key perl-Class-Inspector (1.28 -> 1.31) postfix python-simplejson (3.6.5 -> 3.8.2) python3-setuptools (28.8.0 -> 29.0.1) python3-smbc (1.0.15.5 -> 1.0.15.6) spice-vdagent (0.16.0 -> 0.17.0) subversion (1.9.4 -> 1.9.5) tcsh (6.19.00 -> 6.20.00) texlive-specs-m (2016.111.svn40218 -> 2016.112.svn40218) texlive-specs-n (2016.111.2.004svn28119 -> 2016.112.2.004svn28119) tiff (4.0.6 -> 4.0.7) w3m (0.5.3 -> 0.5.3.git20161120) xf86-video-chips xf86-video-glint xf86-video-mga xf86-video-savage xf86-video-siliconmotion xf86-video-sisusb xf86-video-tdfx xf86-video-trident === Details === ==== Mesa ==== Version update (13.0.1 -> 13.0.2) Subpackages: Mesa-32bit Mesa-dri-devel Mesa-dri-nouveau Mesa-libEGL-devel Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 Mesa-libGL1-32bit Mesa-libGLESv2-2 Mesa-libglapi0 Mesa-libglapi0-32bit Mesa-libva libOSMesa9 libOSMesa9-32bit libgbm1 libgbm1-32bit libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libvulkan_intel libwayland-egl1 libxatracker2 - update to 13.0.2 * fdo#97321 Query INFO_LOG_LENGTH for empty info log should return 0 * fdo#97420 "#version 0" crashes glsl_compiler * i965: Add some APL and KBL SKU strings * i965: Reorder PCI ID list to match release order * i965/glk: Add basic Geminilake support * wsi: fix VK_INCOMPLETE for vkGetSwapchainImagesKHR * ac/nir/llvm: fix channel in texture gather lowering code. * vulkan/wsi/x11: handle timeouts properly in next image acquire (v1.1) * vulkan/wsi: store present mode in swapchain base class * vulkan/wsi/x11: add support for IMMEDIATE present mode * vulkan/wsi/x11: Fix behavior of vkGetPhysicalDeviceSurfaceFormatsKHR * vulkan/wsi/x11: Fix behavior of vkGetPhysicalDeviceSurfacePresentModesKHR * cherry-ignore: add reverted LLVM_LIBDIR patch * anv: fix enumeration of properties * vc4: Don't abort when a shader compile fails. * vc4: Clamp the shadow comparison value. * vc4: Fix register class handling of DDX/DDY arguments. * util/disk_cache: close a previously opened handle in disk_cache_put (v2) * anv: Fix unintentional integer overflow in anv_CreateDmaBufImageINTEL * anv/format: handle unsupported formats properly * glcpp: Handle '#version 0' and other invalid values * glsl: Parse 0 as a preprocessor INTCONSTANT * anv/gen8: Stall when needed in Cmd(Set|Reset)Event * anv/wsi: Set the fence to signaled in AcquireNextImageKHR * anv: Rework fences * vulkan/wsi/wayland: Include pthread.h * vulkan/wsi/wayland: Clean up some error handling paths * vulkan/wsi: Report the correct min/maxImageCount * i965/gs: Allow primitive id to be a system value * anv: Handle null in all destructors * anv/fence: Handle ANV_FENCE_CREATE_SIGNALED_BIT * nir/spirv: Fix handling of gl_PrimitiveId * anv/blorp: Ignore clears for attachments first used as resolve destinations * anv: Implement a depth stall restriction on gen7 * anv/cmd_buffer: Handle running out of binding tables in compute shaders * anv/cmd_buffer: Emit a CS stall before setting a CS pipeline * vulkan/wsi/x11: Implement FIFO mode. * isl: Fix height calculation in isl_msaa_interleaved_scale_px_to_sa * i965/hsw: Set integer mode in sampling state for stencil texturing * intel: Set min_ds_entries on Broxton. * i965: Fix compute shader crash. * mesa: Drop PATH_MAX usage. * i965: Fix GS push inputs with enhanced layouts. * vulkan/wsi: Add a thread-safe queue implementation * anv: fix multi level clears with VK_REMAINING_MIP_LEVELS * gbm: request correct version of the DRI2_FENCE extension * radeonsi: store group_size_variable in struct si_compute * glsl/lower_output_reads: fix geometry shader output handling with conditional emit * Fix races during _mesa_HashWalk(). * mesa: fix empty program log length - baselibs.conf: enabled build of 32bit Mesa-dri-nouveau package, e.g. required for Steam (bnc#1011156) ==== amarok ==== - Expand macro kde4_runtime_requires only when its available to fix quilt setup ==== ffmpeg ==== Version update (3.2 -> 3.2.1) Subpackages: libavcodec57 libavformat57 libavutil55 libswresample2 libswscale4 - Update to version 3.2.1: * avcodec/aac_adtstoasc_bsf: validate and forward extradata if the stream is already ASC * libopusdec: default to stereo for invalid number of channels * sbgdec: prevent NULL pointer access * rmdec: validate block alignment * smacker: limit recursion depth of smacker_decode_bigtree * mxfdec: fix NULL pointer dereference in mxf_read_packet_old * ffmdec: validate codec parameters * avformat/mpeg: Adjust vid probe threshold to correct mis-detection * avcodec/avpacket: fix leak on realloc in av_packet_add_side_data() * avformat/apngenc: use the stream parameters extradata if available * ffprobe: fix crash in case -of is specified with an empty string * exr: fix out-of-bounds read * libschroedingerdec: fix leaking of framewithpts * filmstripdec: correctly check image dimensions * icodec: fix leaking pkt on error * dvbsubdec: fix division by zero in compute_default_clut * escape124: reject codebook size 0 * mpegts: prevent division by zero * matroskadec: fix NULL pointer dereference in webm_dash_manifest_read_header * mxfdec: fix NULL pointer dereference * avcodec/mpeg4videodec: Workaround interlaced mpeg4 edge MC bug * avcodec/mpegvideo: Fix edge emu buffer overlap with interlaced mpeg4 * avcodec/ituh263dec: Avoid spending a long time in slice sync * avcodec: Check side data size before use * avformat/flvdec: Fix regression losing streams ==== git ==== Version update (2.10.2 -> 2.11.0) Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk - git 2.11.0: * backward compatibility: + empty string (matching everything) used as pathspec now triggers a warning + historical argument order "git merge <msg> HEAD <commit>..." is deprecated + default abbreviation length of 7 now scales by repo size * updates + new version of git-gui + many new command line and configuration options + many workflow and output improvements * dropped upstreamed patches: + git-setup-i18n-fix.patch + git-tclIndex.patch ==== irqbalance ==== - Set-fd-limit.patch: Increase limit on file descriptors (bsc#998399) (fate#321645) ==== ispell ==== Subpackages: ispell-american ispell-british - Extend patch boo966124.dif for bug boo#1010330 ==== k3b ==== - Obsolete k3b-codecs, the additional codecs are part of the main package now - Restore conditionals for lame and libmad - Expand macro kde4_runtime_requires only when its available to fix quilt setup ==== libteam ==== Version update (1.22 -> 1.26) - Update to new upstream release 1.26 * dbus: don't do <deny send_interface="..." /> in template dbus s. f. * teamd: do correct l3/l4 tx hashing with vlans * teamd: lacp: use original hwaddr as source address in lacpdus * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian architectures * teamd: handle vlan 0 packets * misc: fix an out-of-bound write with zero-length hardware address * teamd: fix the issue that network blocks when issuing `systemctl stop teamd` * teamd: lacp: Do not unselect port if it changes state to "expired" ==== libuv ==== Version update (1.10.0 -> 1.10.1) - Update to 1.10.1 * win: fix anonymous union syntax * unix: use uv__is_closing everywhere * win: add missing break statement * doc: fix wrong man page link for uv_fs_lstat() * win, tty: handle empty buffer in uv_tty_write_bufs * doc: add cjihrig alternative GPG ID * Revert "win,tty: add support for ANSI codes in win10 v1511" - Add signature and keyring for GPG source verification ==== libvorbis ==== Subpackages: libvorbis-devel libvorbis0 libvorbis0-32bit libvorbisenc2 libvorbisenc2-32bit libvorbisfile3 libvorbisfile3-32bit - Added 32bit libvorbis-devel in baselibs.conf ==== lxpanel ==== Subpackages: liblxpanel0 lxpanel-lang - Reword description. ==== obs-service-tar_scm ==== Version update (0.6.1.1473925745.c5264bb -> 0.7.0.1480000004.4027270) - Update to version 0.7.0.1480000004.4027270: * fixed pip8 problems * keep checkout while running with osc - Update to version 0.7.0.1478249268.e162c66: * prevent key errors when $HOME is not set - Update to version 0.7.0.1477858520.51a62fb: * added locking for cachedir in jailed mode * removed setup_tracking_branches and '--dissociate' * inital version of TarSCM classes * scm_object generation moved to singletask * FETCH_UPSTREAM_COMMANDS into classes * moved update_cache_* to classes * moved detect_version into classes and refactored calls of get_timestamp_* * moved get_timestamp functions into scm classes * git_ref_exists -> TarSCM.git._ref_exists * fetch_upstream_git_submodules -> fetch_submodules to get rid of exceptions for git * just moved some functions for better overview * refactor of detect_changes into classes * url as attribute of TarSCM.scm * run_cmd and safe_run moved into class helpers * combine os.path.join statement * refactoring fetch_upstream to be part of TarSCM.scm * new classes for archives * common method 'get_current_commit' to get rid of execption for git * refactored detect_changes to get rid of changesgenerate exception * get_repocachedir -> TarSCM.scm * revision, repodir and repocachedir as attribute for TarSCM.<scm> * new class TarSCM.cli to make testing easier * testing script name more reliable * fixed arguments for singletask in case of snapcraft * refactored snapcraft code + first tests for snapcraft * added testcase for snapcraft finalize * split classes into serveral files * more testing for TarSCM.tasks * clone_dir/repodir/arch_dir(tar_dir) now attributes of scm objects * test case for save_run * major refactor of git cache handling * consolidation of archive.obscpio and archive.tar parameters * next test cases * sytnax fix for "tar" service * fixed tests for tar * unset CACHEDIRECTORY env variable in unit tests * update atime/mtime of repocachedir if already exists - Update to version 0.7.0.1474270818.3e05f80: * - Update to version 0.7.0.1477567374.d44d677: * use '--dissociate' for git if package-meta is set * added locking for cachedir in jailed mode * removed setup_tracking_branches and '--dissociate' * inital version of TarSCM classes * scm_object generation moved to singletask * FETCH_UPSTREAM_COMMANDS into classes * moved update_cache_* to classes * moved detect_version into classes and refactored calls of get_timestamp_* * moved get_timestamp functions into scm classes * git_ref_exists -> TarSCM.git._ref_exists * fetch_upstream_git_submodules -> fetch_submodules to get rid of exceptions for git * just moved some functions for better overview * refactor of detect_changes into classes * url as attribute of TarSCM.scm * run_cmd and safe_run moved into class helpers * combine os.path.join statement * refactoring fetch_upstream to be part of TarSCM.scm * new classes for archives * common method 'get_current_commit' to get rid of execption for git * refactored detect_changes to get rid of changesgenerate exception * get_repocachedir -> TarSCM.scm * revision, repodir and repocachedir as attribute for TarSCM.<scm> * new class TarSCM.cli to make testing easier * testing script name more reliable * fixed arguments for singletask in case of snapcraft * refactored snapcraft code + first tests for snapcraft * added testcase for snapcraft finalize * split classes into serveral files * more testing for TarSCM.tasks * clone_dir/repodir/arch_dir(tar_dir) now attributes of scm objects * test case for save_run * major refactor of git cache handling * consolidation of archive.obscpio and archive.tar parameters * next test cases * sytnax fix for "tar" service - Update to version 0.7.0.1476904507.e88eed1: * fixed arguments for singletask in case of snapcraft * refactored snapcraft code + first tests for snapcraft * added testcase for snapcraft finalize * split classes into serveral files * more testing for TarSCM.tasks * clone_dir/repodir/arch_dir(tar_dir) now attributes of scm objects * test case for save_run * major refactor of git cache handling * consolidation of archive.obscpio and archive.tar parameters * next test cases ==== openSUSE-build-key ==== - modify dumpsigs to deal with fingerprint lines in gpg output ==== perl-Class-Inspector ==== Version update (1.28 -> 1.31) - updated to 1.31 see /usr/share/doc/packages/perl-Class-Inspector/Changes 1.31 2016-11-25 09:33:47 -0500 - Migrated from Module::Install to Dist::Zilla and ExtUtils::MakeMaker - Fixed meta for repository which was pointing to the wrong URL - updated to 1.30 see /usr/share/doc/packages/perl-Class-Inspector/Changes 1.30 23 Nov 2016 - Moving to prod release 1.29_02 23 Nov 2016 - Update metadata to point to github repository. Plus some other minor dist meta tweaks. - Note: planning on doing a migration from Module::Install to ExtUtils::MakeMaker shortly AFTER the next production release. 1.29_01 22 Nov 2016 - Fix Makefile.PL to work with Perls without '.' in @INC - Fix for the installed method when used with a PAR archive (rt#42846) - Minor documentation fixes (grammar, spelling: rt#74481, rt#85356) ==== postfix ==== Subpackages: postfix-doc - improve config.postfix * improve SASL stuff * add POSTFIX_SMTP_AUTH_SERVICE=(cyrus|dovecot) - improve config.postfix * improve with MySQL stuff - update vda patch to latest available * remove postfix-vda-v13-3.10.0.patch * add postfix-vda-v14-3.0.3.patch - rebase patches (and to be p0) * pointer_to_literals.patch * postfix-main.cf.patch * postfix-master.cf.patch * postfix-no-md5.patch * postfix-ssl-release-buffers.patch - add /etc/postfix/ssl as default DIR for SSL stuff * cacerts -> ../../ssl/certs/ * certs/ - revert POSTFIX_SSL_PATH from '/etc/ssl' to '/etc/postfix/ssl' - improve config.postfix * revert smtpd_tls_CApath to POSTFIX_SSL_PATH/cacerts which is a symlink to /etc/ssl/certs Without reverting, 'gen_CA' would create files which would then be on the previous defined 'sslpath(/etc/ssl)/certs' (smtpd_tls_CApath) Cert reqs would be placed in 'sslpath(/etc/ssl)/certs/postfixreq.pem' which is not a good idea. * mkchroot: sync '/etc/postfix/ssl' to chroot * improve PCONF for smtp{,d}_tls_{cert,key}_file, adding/removing from main.cf, show warning if enabled and file is missing ==== python-simplejson ==== Version update (3.6.5 -> 3.8.2) - update to 3.8.2: * Fix implicit cast compiler warning in _speedups.c * simplejson is now available as wheels for OS X and Windows thanks to Travis-CI and AppVeyor respectively! Many thanks to @aebrahim for getting this party started. * Fix issue with iterable_as_array and indent option * Fix typo in keyword argument name introduced in 3.8.0 * New iterable_as_array encoder option to perform lazy serialization of any iterable objects, without having to convert to tuple or list. * Fix typo introduced in 3.7.0 (behavior should be indistinguishable) https://github.com/simplejson/simplejson/commit/e18cc09b688ea1f3305c27616fd… * Do not cache Decimal class in encoder, only reference the decimal module. This may make reload work in more common scenarios. * Fix compilation with MSVC https://github.com/simplejson/simplejson/pull/119 * simplejson no longer trusts custom str/repr methods for int, long, float subclasses. These instances are now formatted as if they were exact instances of those types. https://github.com/simplejson/simplejson/issues/118 ==== python3-setuptools ==== Version update (28.8.0 -> 29.0.1) - update to version 29.0.1: * #861: Re-release of v29.0.1 with the executable script launchers bundled. Now, launchers are included by default and users that want to disable this behavior must set the environment variable 'SETUPTOOLS_INSTALL_WINDOWS_SPECIFIC_FILES' to a false value like "false" or "0". - update to version 29.0.0: * #841: Drop special exception for packages invoking win32com during the build/install process. See Distribute #118 for history. ==== python3-smbc ==== Version update (1.0.15.5 -> 1.0.15.6) - update to version 1.0.15.6: (no changelog available) ==== spice-vdagent ==== Version update (0.16.0 -> 0.17.0) - Add pkgconfig(glib-2.0) BuildRequires: Explicit dependency. - Handle spice-vdagentd.target in pre/post/preun/postun. - Handle spice-vdagentd.conf in post via tmpfiles_create macro. - Update to 0.17.0 * Denies file-transfer in locked sessions * Denies file-transfer in login screen * Bump glib version to 2.28 * Set exit code to 1 instead of 0 when virtio device cannot be opened * Fix double-free on uinput->screen_info (rhbz#1262635) * Code improvement over unix domain client server support (udcs) * Fix build compatiblity with different libsystemd versions (fdo#94209) - obsoleted patches removed: 8c465007-vdagentd-fixes-small-leak.patch f97751fa-revert-uinput-fix-small-leak-of-screen_info.patch - package: add explicit buildrequires for pkgconfig(dbus-1) ==== subversion ==== Version update (1.9.4 -> 1.9.5) Subpackages: libsvn_auth_gnome_keyring-1-0 libsvn_auth_kwallet-1-0 subversion-bash-completion subversion-devel subversion-perl subversion-python subversion-server subversion-tools - Version update to 1.9.5: * bsc#1011552 CVE-2016-8734 Unrestricted XML entity expansion in mod_dontdothat and Subversion clients using http(s):// - Client-side bugfixes: * fix accessing non-existent paths during reintegrate merge (r1766699 et al) * fix handling of newly secured subdirectories in working copy (r1724448) * info: remove trailing whitespace in --show-item=revision (issue #4660) * fix recording wrong revisions for tree conflicts (r1734106) * gpg-agent: improve discovery of gpg-agent sockets (r1766327) * gpg-agent: fix file descriptor leak (r1766323) * resolve: fix --accept=mine-full for binary files (issue #4647) * merge: fix possible crash (issue #4652) * resolve: fix possible crash (r1748514) * fix potential crash in Win32 crash reporter (r1663253 et al) - Server-side bugfixes: * fsfs: fix "offset too large" error during pack (issue #4657) * svnserve: enable hook script environments (r1769152) * fsfs: fix possible data reconstruction error (issue #4658) * fix source of spurious 'incoming edit' tree conflicts (r1770108) * fsfs: improve caching for large directories (r1721285) * fsfs: fix crash when encountering all-zero checksums (r1759686) * fsfs: fix potential source of repository corruptions (r1756266) * mod_dav_svn: fix excessive memory usage with mod_headers/mod_deflate (issue #3084) * mod_dav_svn: reduce memory usage during GET requests (r1757529 et al) * fsfs: fix unexpected "database is locked" errors (r1741096 et al) * fsfs: fix opening old repositories without db/format files (r1720015) - Client-side and server-side bugfixes: * fix possible crash when reading invalid configuration files (r1715777) - Bindings bugfixes: * swig-pl: do not corrupt "{DATE}" revision variable (r1767768) * javahl: fix temporary accepting SSL server certificates (r1764851) * swig-pl: fix possible stack corruption (r1683266, r1683267) - Drop no longer needed patch: * subversion-1.8.11-swig-py-comment-3.patch ==== tcsh ==== Version update (6.19.00 -> 6.20.00) Subpackages: tcsh-lang - Add patch tcsh-6.20-rmstar.patch from mailing list to restore the correct behaviour of `rm *' if rmstar is set - Update to tcsh bug fix version V6.20.00 - 20161124 * Don't resize the screen if it did not change size. * restore file description when cleaning up after eval: repeat 99 time * PR/572: Fix $SHLVL issue when exec'ing subshells. * PR/403: Fix backquote expansion for multi-byte character sets. * Fix drawing issu with multi-line prompt (Kensuke Iwahashi/David Kaspar) * always send prusage to stdout. * PR/526: Fix double \\ printing from previous fix in history expansion. * Android updates from Corinna Vinschen * PR/526: Quote backslashes properly so they can be preserved in `` expansions * Fix memory leak for paraml * Add notempty and ask values for the noclobber setting (Martin Tournoij) * more correct $wordchars for vimode (Luke Mewburn) * expose VImode in $vimode (Luke Mewburn) * display what the compiled in editor is in bindkey -d (Luke Mewburn) * run-fg-editor improvements and documentation (Luke Mewburn) * Fix parsing of 'if (cond)then' (Fridolin Pokorny) * PR/437: Fix handling of invalid unicode characters. * PR/451: Fix error messages containing %c to be always '%c' - Rename patch tcsh-6.18.03.dif which becomes tcsh-6.20.00.dif now - Drop patch union-wait.patch as now upstream - Modify patches tcsh-6.15.00-pipe.dif tcsh-6.17.06-dspmbyte.dif tcsh-6.18.03-colorls.dif tcsh-6.18.03-history-file-locking.patch tcsh-6.19.00-history-file-locking-order.patch - Add patch tcsh-6.19.00-history-file-locking-order.patch Make a copy of the file descriptor of the history file to be able not only to lock but also unlock this file (bsc#992577) ==== texlive-specs-m ==== Version update (2016.111.svn40218 -> 2016.112.svn40218) - Fix language code: pt-br --> pt_BR and es-ve --> es_VE ==== texlive-specs-n ==== Version update (2016.111.2.004svn28119 -> 2016.112.2.004svn28119) - Fix language code: pt-br --> pt_BR and es-ve --> es_VE ==== tiff ==== Version update (4.0.6 -> 4.0.7) Subpackages: libtiff-devel libtiff5 libtiff5-32bit - Upgrade to upstream release 4.0.7 * libtiff/tif_aux.c + Fix crash in TIFFVGetFieldDefaulted() when requesting Predictor tag and that the zip/lzw codec is not configured. Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2591 * libtiff/tif_compress.c + Make TIFFNoDecode() return 0 to indicate an error and make upper level read routines treat it accordingly. (linked to the test case of http://bugzilla.maptools.org/show_bug.cgi?id=2517) * libtiff/tif_dir.c + Discard values of SMinSampleValue and SMaxSampleValue when they have been read and the value of SamplesPerPixel is changed afterwards (like when reading a OJPEG compressed image with a missing SamplesPerPixel tag, and whose photometric is RGB or YCbCr, forcing SamplesPerPixel being 3). Otherwise when rewriting the directory (for example with tiffset, we will expect 3 values whereas the array had been allocated with just one), thus causing a out of bound read access. Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2500 (CVE-2014-8127, bsc#914890, duplicate: CVE-2016-3658, bsc#974840) * libtiff/tif_dirread.c + In TIFFFetchNormalTag(), do not dereference NULL pointer when values of tags with TIFF_SETGET_C16_ASCII/TIFF_SETGET_C32_ASCII access are 0-byte arrays. Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2593 (regression introduced by previous fix done on 2016-11-11 for CVE-2016-9297, bsc#1010161). Assigned as CVE-2016-9448, bsc#1011103 + In TIFFFetchNormalTag(), make sure that values of tags with TIFF_SETGET_C16_ASCII/TIFF_SETGET_C32_ASCII access are null terminated, to avoid potential read outside buffer in _TIFFPrintField(). Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2590 (CVE-2016-9297, bsc#1010161) + Initialize doubledata at line 3693 to NULL to please MSVC 2013 + Prevent reading ColorMap or TransferFunction if BitsPerPixel > 24, so as to avoid huge memory allocation and file read attempts + Reject images with OJPEG compression that have no TileOffsets/StripOffsets tag, when OJPEG compression is disabled. Prevent null pointer dereference in TIFFReadRawStrip1() and other functions that expect td_stripbytecount to be non NULL. Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2585 + When compiled with DEFER_STRILE_LOAD, fix regression, when reading a one-strip file without a StripByteCounts tag. + Workaround false positive warning of Clang Static Analyzer about null pointer dereference in TIFFCheckDirOffset(). * libtiff/tif_dirwrite.c + Avoid null pointer dereference on td_stripoffset when writing directory, if FIELD_STRIPOFFSETS was artificially set for a hack case in OJPEG case. Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2500 (CVE-2014-8127, bsc#914890, duplicate: CVE-2016-3658, bsc#974840) + Fix truncation to 32 bit of file offsets in TIFFLinkDirectory() and TIFFWriteDirectorySec() when aligning directory offsets on an even offset (affects BigTIFF). * libtiff/tif_dumpmode.c + DumpModeEncode() should return 0 in case of failure so that the above mentionned functions detect the error. * libtiff/tif_fax3.c + remove dead assignment in Fax3PutEOLgdal(). * libtiff/tif_fax3.h + make Param member of TIFFFaxTabEnt structure a uint16 to reduce size of the binary. * libtiff/tif_getimage.c + Fix out-of-bound reads in TIFFRGBAImage interface in case of unsupported values of SamplesPerPixel/ExtraSamples for LogLUV/CIELab. Add explicit call to TIFFRGBAImageOK() in TIFFRGBAImageBegin(). Fix CVE-2015-8665 and CVE-2015-8683. + Fix some benign warnings which appear in 64-bit compilation under Microsoft Visual Studio of the form "Arithmetic overflow: 32-bit value is shifted, then cast to 64-bit value. Results might not be an expected value." + TIFFRGBAImageOK: Reject attempts to read floating point images. * libtiff/tif_luv.c + Fix potential out-of-bound writes in decode functions in non debug builds by replacing assert()s by regular if checks (http://bugzilla.maptools.org/show_bug.cgi?id=2522). Fix potential out-of-bound reads in case of short input data. + Validate that for COMPRESSION_SGILOG and PHOTOMETRIC_LOGL, there is only one sample per pixel. Avoid potential invalid memory write on corrupted/unexpected images when using the TIFFRGBAImageBegin() interface * libtiff/tif_next.c + Fix potential out-of-bound write in NeXTDecode() (http://bugzilla.maptools.org/show_bug.cgi?id=2508) * libtiff/tif_pixarlog.c + Avoid zlib error messages to pass a NULL string to %s formatter, which is undefined behaviour in sprintf(). + Fix out-of-bounds write vulnerabilities in heap allocated buffers. Reported as MSVR 35094. + Fix potential buffer write overrun in PixarLogDecode() on corrupted/unexpected images (CVE-2016-5875, bsc#987351) + Fix write buffer overflow in PixarLogEncode if more input samples are provided than expected by PixarLogSetupEncode. Idea based on libtiff-CVE-2016-3990.patch from libtiff-4.0.3-25.el7_2.src.rpm, but with different and simpler check. (http://bugzilla.maptools.org/show_bug.cgi?id=2544, bsc#975069) * libtiff/tif_predict.c + PredictorSetup: Enforce bits-per-sample requirements of floating point predictor (3). Fixes CVE-2016-3622 "Divide By Zero in the tiff2rgba tool." (bsc#974449) * libtiff/tif_predict.h, libtiff/tif_predict.c + Replace assertions by runtime checks to avoid assertions in debug mode, or buffer overflows in release mode. Can happen when dealing with unusual tile size like YCbCr with subsampling. Reported as MSVR 35105. * libtiff/tif_read.c + Fix out-of-bounds read on memory-mapped files in TIFFReadRawStrip1() and TIFFReadRawTile1() when stripoffset is beyond tmsize_t max value + Make TIFFReadEncodedStrip() and TIFFReadEncodedTile() directly use user provided buffer when no compression (and other conditions) to save a memcpy(). * libtiff/tif_strip.c + Make TIFFNumberOfStrips() return the td->td_nstrips value when it is non-zero, instead of recomputing it. This is needed in TIFF_STRIPCHOP mode where td_nstrips is modified. Fixes a read outsize of array in tiffsplit (or other utilities using TIFFNumberOfStrips()). Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2587 (CVE-2016-9273, bsc#1010163) * libtiff/tif_write.c + Fix issue in error code path of TIFFFlushData1() that didn't reset the tif_rawcc and tif_rawcp members. I'm not completely sure if that could happen in practice outside of the odd behaviour of t2p_seekproc() of tiff2pdf). The report points that a better fix could be to check the return value of TIFFFlushData1() in places where it isn't done currently, but it seems this patch is enough. Reported as MSVR 35095. + Make TIFFWriteEncodedStrip() and TIFFWriteEncodedTile() directly use user provided buffer when no compression to save a memcpy(). + TIFFWriteEncodedStrip() and TIFFWriteEncodedTile() should return -1 in case of failure of tif_encodestrip() as documented * tools/fax2tiff.c + Fix segfault when specifying -r without argument. Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2572 * tools/Makefile.am + The libtiff tools bmp2tiff, gif2tiff, ras2tiff, sgi2tiff, sgisv, and ycbcr are completely removed from the distribution. The libtiff tools rgb2ycbcr and thumbnail are only built in the build tree for testing. Old files are put in new 'archive' subdirectory of the source repository, but not in distribution archives. These changes are made in order to lessen the maintenance burden. * tools/rgb2ycbcr.c + Validate values of -v and -h parameters to avoid potential divide by zero. Fixes CVE-2016-3623, bsc#974618 (http://bugzilla.maptools.org/show_bug.cgi?id=2569) * tools/tiff2bw.c + Fix weight computation that could result of color value overflow (no security implication). Fix http://bugzilla.maptools.org/show_bug.cgi?id=2550. * tools/tiff2pdf.c + Avoid undefined behaviour related to overlapping of source and destination buffer in memcpy() call in t2p_sample_rgbaa_to_rgb() Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2577 + Fix out-of-bounds write vulnerabilities in heap allocate buffer in t2p_process_jpeg_strip(). Reported as MSVR 35098. + Fix potential integer overflows on 32 bit builds in t2p_read_tiff_size() Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2576 + Fix read -largely- outsize of buffer in t2p_readwrite_pdf_image_tile(), causing crash, when reading a JPEG compressed image with TIFFTAG_JPEGTABLES length being one. Reported as MSVR 35101. CVE-2016-9453, bsc#1011107 + Fix write buffer overflow of 2 bytes on JPEG compressed images. Reported as TALOS-CAN-0187, CVE-2016-5652, bsc#1007280. Also prevents writing 2 extra uninitialized bytes to the file stream. * tools/tiff2rgba.c + Fix integer overflow in size of allocated buffer, when -b mode is enabled, that could result in out-of-bounds write. Based initially on patch tiff-CVE-2016-3945.patch from libtiff-4.0.3-25.el7_2.src.rpm, with correction for invalid tests that rejected valid files. (http://bugzilla.maptools.org/show_bug.cgi?id=2545, bsc#974614) * tools/tiffcp.c + Fix out-of-bounds write on tiled images with odd tile width vs image width. Reported as MSVR 35103. + Fix read of undefined variable in case of missing required tags. Found on test case of MSVR 35100. * tools/tiffcrop.c + Avoid access outside of stack allocated array on a tiled separate TIFF with more than 8 samples per pixel. (CVE-2016-5321, CVE-2016-5323, http://bugzilla.maptools.org/show_bug.cgi?id=2558, http://bugzilla.maptools.org/show_bug.cgi?id=2559, bsc#984813, bsc#984815) + Fix memory leak in (recent) error code path. Fixes Coverity 1394415. + Fix multiple uint32 overflows in writeBufferToSeparateStrips(), writeBufferToContigTiles() and writeBufferToSeparateTiles() that could cause heap buffer overflows. Fixes http://bugzilla.maptools.org/show_bug.cgi?id=2592 + Fix out-of-bound read of up to 3 bytes in readContigTilesIntoBuffer(). Reported as MSVR 35092. + Fix out-of-bounds write in loadImage(). From patch libtiff-CVE-2016-3991.patch from libtiff-4.0.3-25.el7_2.src.rpm (http://bugzilla.maptools.org/show_bug.cgi?id=2543, bsc#975070) + Fix read of undefined buffer in readContigStripsIntoBuffer() due to uint16 overflow. Reported as MSVR 35100. + Fix various out-of-bounds write vulnerabilities in heap or stack allocated buffers. Reported as MSVR 35093, MSVR 35096 and MSVR 35097. + readContigTilesIntoBuffer: Fix signed/unsigned comparison warning. * tools/tiffdump.c + Fix a few misaligned 64-bit reads warned by -fsanitize + ReadDirectory: Remove uint32 cast to_TIFFmalloc() argument which resulted in Coverity report. Added more mutiplication overflow checks * tools/tiffinfo.c + Fix out-of-bound read on some tiled images. (http://bugzilla.maptools.org/show_bug.cgi?id=2517) + TIFFReadContigTileData: Fix signed/unsigned comparison warning. + TIFFReadSeparateTileData: Fix signed/unsigned comparison warning. - Removed patches: * tiff-4.0.4-uninitialized_mem_NeXTDecode.patch * tiff-4.0.6-CVE-2015-8782.patch * tiff-4.0.6-CVE-2016-3186.patch * tiff-4.0.6-CVE-2016-3623.patch * tiff-4.0.6-CVE-2016-3945.patch * tiff-4.0.6-CVE-2016-3990.patch * tiff-4.0.6-CVE-2016-3991.patch * tiff-4.0.6-libtiff-tif_getimage.c-TIFFRGBAImageOK-Reject-attemp.patch * tiff-4.0.6-libtiff-tif_luv.c-validate-that-for-COMPRESSION_SGIL.patch * tiff-4.0.6-libtiff-tif_pixarlog.c-fix-potential-buffer-write-ov.patch * tiff-4.0.6-libtiff-tif_read.c-make-TIFFReadEncodedStrip-and.patch * tiff-4.0.6-tools-tiffcrop.c-fix-various-out-of-bounds-write-vul.patch - Fixed in the upsteam release - Changed patch: * tiff-4.0.6-CVE-2015-7554.patch -> tiff-4.0.7-CVE-2015-7554.patch - Rediffed to the changed context ==== w3m ==== Version update (0.5.3 -> 0.5.3.git20161120) - update to debian git version (bsc#1011293) addressed security issues: CVE-2016-9621: w3m: global-buffer-overflow write (bsc#1012020) CVE-2016-9622: w3m: null deref (bsc#1012021) CVE-2016-9623: w3m: null deref (bsc#1012022) CVE-2016-9624: w3m: near-null deref (bsc#1012023) CVE-2016-9625: w3m: stack overflow (bsc#1012024) CVE-2016-9626: w3m: stack overflow (bsc#1012025) CVE-2016-9627: w3m: heap overflow read + deref (bsc#1012026) CVE-2016-9628: w3m: null deref (bsc#1012027) CVE-2016-9629: w3m: null deref (bsc#1012028) CVE-2016-9630: w3m: global-buffer-overflow read (bsc#1012029) CVE-2016-9631: w3m: null deref (bsc#1012030) CVE-2016-9632: w3m: global-buffer-overflow read (bsc#1012031) CVE-2016-9633: w3m: OOM (bsc#1012032) CVE-2016-9434: w3m: null deref (bsc#1011283) CVE-2016-9435: w3m: use uninit value (bsc#1011284) CVE-2016-9436: w3m: use uninit value (bsc#1011285) CVE-2016-9437: w3m: write to rodata (bsc#1011286) CVE-2016-9438: w3m: null deref (bsc#1011287) CVE-2016-9439: w3m: stack overflow (bsc#1011288) CVE-2016-9440: w3m: near-null deref (bsc#1011289) CVE-2016-9441: w3m: near-null deref (bsc#1011290) CVE-2016-9442: w3m: potential heap buffer corruption (bsc#1011291) CVE-2016-9443: w3m: null deref (bsc#1011292) dropped patches: w3m-fix-build-with-imlib2-1.4.6.patch w3m-scheme.patch w3mman-formatting.patch w3m-parallel-make.patch w3m-gc7.diff w3m-openssl.patch w3m-closedir.patch w3m-fh-def.patch w3m-ssl-verify.patch w3m-parsetagx-crash.patch w3m-tempdir-override.patch w3m-0.5.1-no-ASCII-equivalents-by-default.patch w3m-uninitialized.patch w3m-inline-image.patch w3m-0.4.1-textarea-segfault.dif ported patches: w3m-disable-cookie-special-domain-check.patch to 0001-allow-to-configure-the-accept-option-for-bad-cookies.patch w3m-0.4.1-session-mgmt.dif to 0001-implements-simple-session-management.patch w3m-history-crossdev.patch to 0001-handle-EXDEV-during-history-file-rename.patch w3mman-formatting.patch to 0001-w3mman-don-t-show-invalid-characters-bsc-950800.patch ==== xf86-video-chips ==== - U_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 ==== xf86-video-glint ==== - U_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 ==== xf86-video-mga ==== - U_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 ==== xf86-video-savage ==== - U_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 ==== xf86-video-siliconmotion ==== - U_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 ==== xf86-video-sisusb ==== - u_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 ==== xf86-video-tdfx ==== - U_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 ==== xf86-video-trident ==== - U_Adapt-Block-WakeupHandler-signature-for-ABI-23.patch * Adapt Block/WakeupHandler signature for ABI 23 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] friend needs to put out bounty for bugfix
by Felix Miata 03 Dec '16

03 Dec '16

He can't see much, so needs https://bugzilla.opensuse.org/show_bug.cgi?id=981271 fixed. How does one go about finding someone to pay to fix a bug? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] build.opensuse.org maintenance on sunday and monday
by Adrian Schröter 03 Dec '16

03 Dec '16

Hi, we reached again new load levels on OBS and need to split again our main backend servers. This will happen on coming sunday and will most likely continue on monday. What will be affected exactly? * build.opensuse.org will stay and reachable * all content on download.opensuse.org will stay * source changes, requests will remain work * schedulers for main projects will get stopped. => new builds will not start, except for home:* and openSUSE staging projects. The builds will get triggered automatically when we boot the schedulers again. * projects outside of openSUSE and home namespace may show an old build state for some time until the final sync has finished. * home:* and openSUSE Staging projects will remain to work all the time, including building and publishing. The reward will be more IO throughput later one, which means faster scheduling and publishing :) -- Adrian Schroeter email: adrian(a)suse.de SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg) Maxfeldstraße 5 90409 Nürnberg Germany -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] New Tumbleweed snapshot 20161201 released!
by Dominique Leuenberger 03 Dec '16

03 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: calligra dhcp dracut hplip (3.16.8 -> 3.16.10) kchmviewer kdbg kdevelop4 kdevelop4-plugins kdevplatform4 kernel-firmware (20161005 -> 20161121) kernel-source (4.8.10 -> 4.8.11) kradio libkolabxml (1.1.2 -> 1.1.6) libqmi (1.16.0 -> 1.16.2) libyui (3.2.8 -> 3.2.9) p11-kit perl-Text-Unidecode (1.27 -> 1.30) pesign-obs-integration rp-pppoe vala (0.34.2 -> 0.34.3) yast2-ntp-client (3.2.0 -> 3.2.1) yast2-packager (3.2.7 -> 3.2.9) === Details === ==== calligra ==== Subpackages: calligra-extras-dolphin calligra-extras-okular calligra-stage calligra-words-common - Expand macro kde4_runtime_requires only when its available to fix quilt setup ==== dhcp ==== Subpackages: dhcp-client dhcp-doc dhcp-relay dhcp-server - Add config file for registering dhcp server in slp (bsc#992072) ==== dracut ==== - Remove 0314-run-rpcbind.patch again, was solved by another change in rpcbind ==== hplip ==== Version update (3.16.8 -> 3.16.10) Subpackages: hplip-hpijs hplip-sane - Fixed SLES12 SP2 build problem in %files section for /usr/lib/udev/rules.d - Version upgrade to 3.16.10: * Added Support for the Following New Printers: - HP officejetPro7740 wide Format All in one - HP Office jet 6950 All-in-One printer - HP ScanJet Pro 3000 s3 Sheet-feed Scanner - HP ScanJet Enterprise Flow 5000 s4 Sheet-feed Scanner - HP Scanjet Entrprise Flow 7000 s3 sheetfeed Scanner - HP Color LaserJet Pro MFP M277c6 * Notes to follow: - For scanjets scan using command "hp-scan --adf --size=size_name" - "hp-scan --help" for all size_name - Version upgrade to 3.16.9: * Added Support for the Following New Printers: - HP OfficeJet Pro 8732M All-in-One Printer - HP OfficeJet 8702 All-in-One Printer - HP OfficeJet 6960 All-in-One Printer - HP PageWide 377dw Multifunction Printer - HP PageWide 352dw Printer - HP PageWide Managed Color MFP E58650 series - HP PageWide Managed Color E55650 series ==== kchmviewer ==== - Expand macro kde4_runtime_requires only when its available to fix quilt setup ==== kdbg ==== Subpackages: kdbg-doc kdbg-lang - Expand macro kde4_runtime_requires only when its available to fix quilt setup ==== kdevelop4 ==== Subpackages: kdevelop4-devel kdevelop4-lang kdevelop4-plugin-cppsupport - Expand macro kde4_runtime_requires only when its available to fix quilt setup ==== kdevelop4-plugins ==== - Expand macro kde4_runtime_requires only when its available to fix quilt setup ==== kdevplatform4 ==== Subpackages: kdevplatform4-lang libkdevplatform8 - Expand macro kde4_runtime_requires only when its available to fix quilt setup ==== kernel-firmware ==== Version update (20161005 -> 20161121) Subpackages: ucode-amd - Update to version 20161121: * mediatek: update MT8173 VPU firmware for idle state * amdgpu: add new smc firmware for newer tonga and iceland chips * linux-firmware: rockchip: update dptx firmware to v3.1 * rockchip/dptx: update WHENCE to version 3.1 ==== kernel-source ==== Version update (4.8.10 -> 4.8.11) Subpackages: kernel-default kernel-default-devel kernel-devel kernel-docs kernel-macros kernel-syms - Linux 4.8.11 (: :). - commit 8e531aa - ASoC: intel: Fix crash at suspend/resume without card registration (bsc#1010690). - commit b60c8fd - Revert "ACPI: Execute _PTS before system reboot" (bsc#101220). - commit 95e516a - xc2028: Fix use-after-free bug properly (CVE-2016-7913 bsc#1010478). - commit 534ac6c - Update patches.kernel.org/patch-4.8.7-8 references (add CVE-2016-9555 bsc#1011685). - commit d81bac1 ==== kradio ==== - Expand macro kde4_runtime_requires only when its available to fix quilt setup ==== libkolabxml ==== Version update (1.1.2 -> 1.1.6) - disable parallel build to hopefully fix random build failures - New upstream release 1.1.6 + The created date is optional - New upstream release 1.1.5 + Support audio alarms without an attachment - New upstream release 1.1.4 + The tests require valid created dates - New upstream release 1.1.3 + The "created" property must be a UTC date-time ==== libqmi ==== Version update (1.16.0 -> 1.16.2) Subpackages: libqmi-glib5 libqmi-tools - Update to version 1.16.2: + DMS: flagged several methods as available since DMS 1.1. + NAS: Fix RX/TX mixup in 'Get LTE Cphy CA Info'. + qmi-proxy: - Fix segfault when trying to use already disposed clients. - Fix segfault when trying to use already disposed transactions. - Plug several memleaks in error conditions. + qmicli: Added support for IP type in --wds-start-network. + build: fix checking for libmbim. ==== libyui ==== Version update (3.2.8 -> 3.2.9) - implement shortcut conflicts resolver for menu buttons (bsc#940817) - 3.2.9 ==== p11-kit ==== Subpackages: libp11-kit0 libp11-kit0-32bit p11-kit-32bit p11-kit-devel p11-kit-tools - 32-bit compatibility fixes: * Add PKCS11 module to p11-kit-32bit (bsc#996047#c39) * Add p11-kit-nss-trust-32bit NSS module * Fix potential bi-arch issue with private binaries (fdo#98817, p11-kit-biarch.patch) ==== perl-Text-Unidecode ==== Version update (1.27 -> 1.30) - updated to 1.30 see /usr/share/doc/packages/perl-Text-Unidecode/ChangeLog ==== pesign-obs-integration ==== - Copy over any *.log files from the first build (bsc#1012422) ==== rp-pppoe ==== - Fix patches and script for version 3.12. - dropped logger-path.diff - Add net-tools support. net-tools-deprecated is no longer required. ==== vala ==== Version update (0.34.2 -> 0.34.3) Subpackages: libvala-0_34-0 - Update to version 0.34.3: + Bug fixes and binding updates. ==== yast2-ntp-client ==== Version update (3.2.0 -> 3.2.1) - Remove warning message from a wrong widget definition (bsc#1012185) - 3.2.1 ==== yast2-packager ==== Version update (3.2.7 -> 3.2.9) - Revert the last change, as it is more tricky to get the correct behavior. For more details see the discussion in (bsc#966466). - 3.2.9 - Always show summary mode when clicking on details in software proposal (bsc#966466) - 3.2.8 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed snapshot repositories prototype
by Jimmy Berry 03 Dec '16

03 Dec '16

About a month ago I sent out a proposal titled "Tumbleweed snapshot repositories" [1]. Since then I spent some time building a basic prototype that could use some interested folks to play around with it. For those not interested in reading my updates on the implementation and considerations the following are the relevant links. - https://github.com/boombatower/tumbleweed-cli/wiki/Installation-and-usage - https://github.com/boombatower/tumbleweed-cli - https://github.com/boombatower/tumbleweed-snapshot As of the time of this writing there are only two snapshots available. - 20161201 - 20161129 The snapshot script is set to automatically check for the publishing of a new snapshot and should create them automatically. Some open items from the proposal which have been decided in prototype are: - directory structure: placement of snapshot identifier in URL - location for code: modify OBS / kiwi, etc. - mirror load: concerns about extra size and load on mirrors The snapshot identifier is placed at the root level of the URL for a number of reasons. 1) does not require several URL patterns 2) works for all repo types 3) easily provides an entirely separate file tree for separate mirror network For example: /tumbleweed/repo/oss/ Becomes: /20161129/tumbleweed/repo/oss/ Given the different structures of the main openSUSE Tumbleweed product repo vs a home/devel repo structure this avoid unnecessary complications. /repositories/home:/boombatower:/snapshot/openSUSE_Tumbleweed/ Becomes: /20161129/repositories/home:/boombatower:/snapshot/openSUSE_Tumbleweed/ Instead of: /repositories/home:/boombatower:/snapshot/openSUSE_Tumbleweed/20161129/ /repositories/home:/boombatower:/snapshot/openSUSE_Tumbleweed_snapshot/ 20161129/ This structure also pairs well with the code strategy since it ended up making sense to keep the code out of the existing publishing workflows. As such the code does not have the context to understand the directory structure and it does not need to with this method. Since the snapshots are essentially backups of the published repositories it really does not make sense to mix into existing workflows. Additionally, in order to save space and implement the symlink strategy the script needs to compare the current snapshot against a previous snapshot which really does not fit in publishing workflow. As mentioned, there are concerns about mirror load in terms of the extra space required to store the snapshots. Given a separate and complete directory tree is available it can be sync'd using a completely separate rysnc module or similar. A stub is provided for the current snapshot which redirects to the standard mirror infrastructure to avoid serving the files directly. Once the snapshot is no longer current it automatically falls back to serving the snapshotted files. This approach achieves the design goals while utilizing the existing infrastructure. For example: - 20161201 is released and redirects to standard mirrors - 20161202 is released and redirects to standard mirrors - 20161201 serves snapshotted content The end user URLs can thus always include the snapshot identifier without suffering from reduced performance (aside from the redirect). The script looks at the openSUSE:Factory/snapshot repo for updates to the _product:openSUSE-release package [2]. Once detected the sync'd repo tree is snapshotted (against previous snapshot) and the new snapshot is redirect to the standard mirrors. By using this as the trigger the snapshot is triggered before the rsync tree is updated so the snapshot contains the newest published packages before the new snapshot was published. This strategy also works for devel/home repos which may begin rebuilding as a result of the new snapshot or updates from maintainers. The rsync tree is continually sync'd inbetween snapshotting to ensure the latest versions are available when the snapshot is triggered. Obviously, this process could run on the same infrastructure as OBS to avoid the need to sync the tree. Having the trigger work completely outside of OBS itself means that third-party repositories can also be snapshotted without those parties having to set things up. The Tumbleweed update repository is not snapshotted since it is intended to override snapshot packages. Obviously, in rare instances this could cause issues just as it can in normal operation. The update repo could be snapshotted and simply not utilized by default but available in the case users had issues and needed to utilize it. The secondary goal of "locking" the repository or indicating when a repo is in flux is not currently achieved for the latest repo, but obviously works naturally for the snapshot repos. Based on some of the ideas in the proposal and additional thinking I have done on the subject it seems achievable, but focusing on the basic snapshot functionality first seems prudent. A sidenote, the tumbleweed/iso/ directory is currently snapshotted as it can be handy to have older installation media for the times when they break. Given the limited resources of the server hosting the prototype I may disable it since it adds a couple tens of GB to each snapshot. For those interesting in experimenting inside a controlled environment I'd recommend a docker container. The official opensuse:tumbleweed images is infrequently updated and as such will typically require a sizable update to get into the neighborhood of recent snapshots. Alternatively, my boombatower/opensuse:tumbleweed is rebuilt once weekly and as such should provide a recent starting point. docker run -it boombatower/opensuse:tumbleweed /bin/bash Add --rm if you would like it to automatically disappear after exiting. I will be updating one of my machines using this prototype and should notice issues, but feel free to file issues on the github repos or respond to mail. [1] https://lists.opensuse.org/opensuse-factory/2016-10/msg00591.html [2] https://build.opensuse.org/package/binaries/openSUSE:Factory/ _product:openSUSE-release?repository=snapshot Have fun! -- Jimmy

1 0

[opensuse-factory] openSUSE Tumbleweed – Review of the Week 2016/48
by Dominique Leuenberger / DimStar 02 Dec '16

02 Dec '16

Dear Tumbleweed users and hackers, After releasing daily snapshots without interruption for 17 days, Tumbleweed did slow down a bit during the last week. As already mentioned in my last review, 1124 had been canceled due to an issue with sddm installing strange branding configurations. And later on, we ‘broke’ our own staging setup and needed to bootstrap a few of them, making the throughput much lower than we were used to. So, we ended up with 3 snapshots since my last review: 1125, 1128 and 1129. The snapshots contained these interesting updates: * KDE Plasma 5.8.4 * A couple X.org driver updates, in preparation for X 1.19 * SDDM 0.14.0 * LightDM 1.21.1 So, even if we got less snapshots, we just make them bigger – to ensure you get your frequent dose of updates. And those things are in the pipeline: * X.Org 1.19 – pending on virtualbox fix * All the nice things the YaST Team promised * Hunspell 1.5 – waiting for KDE Frameworks 5.29 Note that the next snapshots might again be a bit slower due to the OBS scheduler reconfiguration that was announced by Adrian [0] Cheers, Dominique [0] https://lists.opensuse.org/opensuse-factory/2016-12/msg00017.html

1 0

[opensuse-factory] [42.2] systemd-journal-remote|upload|gatewad?
by Mikhail Kasimov 02 Dec '16

02 Dec '16

Hello! Are the packages systemd-journal-remote|upload|gatewad accessable in systemd 228 for Leap 42.2? Can't see them on software.opensuse.org and in repo-s... Thank you! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] YaST: highlights of development sprint 28
by Ancor Gonzalez Sosa 02 Dec '16

02 Dec '16

November is over, so it is another Scrum sprint for the YaST team. Check the highlights at https://lizards.opensuse.org/?p=12141 Enjoy -- Ancor González Sosa YaST Team at SUSE Linux GmbH -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed does not halt
by Michael Ströder 02 Dec '16

02 Dec '16

HI! On one laptop (of half a dozen) I've configured with Tumbleweed the system is hanging during shutdown, some process is massively accessing the hard-disk. Any hint where to search for this issue? Ciao, Michael.

4 11

[opensuse-factory] rpmlint noise showing up in OBS
by Peter Linnell 02 Dec '16

02 Dec '16

Hi there, Since today, I have noticed every review I have had going to into Factory has the following: /etc/magic, 3: Warning: using regular magic file `/usr/share/misc/magic' /usr/share/misc/magic, 16488: Warning: missing ')' in indirect offset /etc/magic, 3: Warning: using regular magic file `/usr/share/misc/magic' /usr/share/misc/magic, 16488: Warning: missing ')' in indirect offset /etc/magic, 3: Warning: using regular magic file `/usr/share/misc/magic' /usr/share/misc/magic, 16488: Warning: missing ')' in indirect offset I have no idea what causes this, but it seems to have come from a recent change somewhere. Thanks, Peter -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] TW: systemd v228.16, dbus access problems
by mab 02 Dec '16

02 Dec '16

Hello, My system works fine with systemd-228-15.2. After upgrading to 228-16 (with systemd-sysvinit udev) the journal contains entries like: cron[16200]: pam_systemd(crond:session): Failed to connect to system bus: No such file or directory dbus[1257]: [system] Failed to activate service 'org.freedesktop.systemd1': timed out sddm-helper[16255]: pam_systemd(sddm:session): Failed to connect to system bus: No such file or directory A reboot results in several failed services (avahi, bluetooth, ModemManager, login-systemd, NetworkManager) , as far as I can see due to dbus access failure. Other programs, e.g. gpg (failed IPC call), are affected, too. systemd-logind[1254]: Failed to connect to system bus: No such file or directory dbus[1257]: [system] Failed to activate service 'org.freedesktop.PolicyKit1': timed outdbus[1257]: [system] Failed to activate service 'org.freedesktop.systemd1': timed out dbus[1257]: [system] Failed to activate service 'org.freedesktop.hostname1': timed out dbus[1257]: [system] Failed to activate service 'org.freedesktop.nm_dispatcher': timed out How to analyze that? Greetings mab KDE-Plasma-Version: 5.8.4 KDE-Frameworks-Version: 5.28.0 Qt-Version: 5.7.0 Kernel-Version: 4.8.10-1-default -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 1

[opensuse-factory] jing error on simple xml from CMS
by Normand 02 Dec '16

02 Dec '16

Hello there, I am trying to use autoyast for the first time, so reading autoyast doc (1) I generated an autoyastmno xml using autoyast CMS (2) not doing any changes in UI, only saving with default parameters. xmllint is not reporting any error, but jing is reporting errors detailed in (3) If I ignore the errors about missing jar, there are still "text not allowed" error. Does it worse a bug ? or is it a user error ? (1) https://doc.opensuse.org/projects/autoyast/#Autoinstallation.collectInfo (2) sudo /sbin/yast2 autoyast (3) === $jing /usr/share/YaST2/schema/autoyast/rng/profile.rng /var/lib/autoinstall/repository/autoyastmno /usr/bin/build-classpath: Could not find saxon6 Java extension for this JVM /usr/bin/build-classpath: error: Some specified jars were not found /var/lib/autoinstall/repository/autoyastmno:54:34: error: found attribute "config:type", but no attributes allowed here /var/lib/autoinstall/repository/autoyastmno:54:39: error: text not allowed here; expected the element end-tag or element "ask-list", "cio_ignore", "minimal-configuration", "mode", "mouse", "proposals", "self_update_url", "semi-automatic", "signature-handling", "storage" or "wait" === -- Michel Normand -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] New Tumbleweed snapshot 20161129 released!
by Dominique Leuenberger 01 Dec '16

01 Dec '16

Please note that this mail was generated by a script. The described changes are computed based on the x86_64 DVD. The full online repo contains too many changes to be listed here. Please check the known defects of this snapshot before upgrading: https://openqa.opensuse.org/tests/overview?distri=opensuse&groupid=1&versio… When you reply to report some issues, make sure to change the subject. It is not helpful to keep the release announcement subject in a thread while discussing a specific problem. Packages changed: acpid branding-openSUSE installation-images-openSUSE (14.278 -> 14.279) kde-branding-openSUSE lightdm (1.20.0 -> 1.21.1) nghttp2 (1.15.0 -> 1.16.1) openvpn p7zip perl-DBD-mysql (4.040 -> 4.041) systemd xfce4-vala xfdesktop (4.12.2 -> 4.12.3) === Details === ==== acpid ==== - Remove ExclusiveArch. At least some ARM boards emulate ACPI events with their power button driver. At worst the daemon will be superfluous on some systems. (bsc#1012325) ==== branding-openSUSE ==== Subpackages: gfxboot-branding-openSUSE grub2-branding-openSUSE plymouth-branding-openSUSE wallpaper-branding-openSUSE xfce4-splash-branding-openSUSE - enable grub2-branding-openSUSE also for %%arm ==== installation-images-openSUSE ==== Version update (14.278 -> 14.279) - removed local alias - 14.279 ==== kde-branding-openSUSE ==== Subpackages: kdelibs4-branding-openSUSE ksplash-qml-branding-openSUSE ksplashx-branding-openSUSE - Change version back to 13.3 ==== lightdm ==== Version update (1.20.0 -> 1.21.1) Subpackages: liblightdm-gobject-1-0 lightdm-lang - Update to version 1.21.1 (changes since 1.20.0): * Add liblightdm functions for getting OS release information and the message of the day. * Warn if we find unknown keys in configuration. * Fix .profile errors not showing in .xsession-errors log. * Remove a duplicate Qt property in liblightdm. * Fix and improve liblightdm API documentation. * Minor GIR annotation fixes. * Fix greeters crashing with unknown configuration keys (regression from 1.12.0) * Add an API verison to the greeter-daemon protocol for future enhancements. * More regression tests. ==== nghttp2 ==== Version update (1.15.0 -> 1.16.1) - Update to version 1.16.1: * lib: Prevent undefined behavior in decode_length * nghttpx: Fix bug which may crash nghttpx if non-final response is forwarded from origin server to HTTP/1.1 client - Changes for version 1.16.0: * lib: Add nghttp2_set_debug_vprintf_callback to take advantage of DEBUGF statements in when building DEBUGBUILD. * Update .clang-format for clang-format-3.9 * build: Make it possible to include nghttp2/CMakeLists.txt in another project using add_subdirectory. * third-party: Update http-parser to feae95a3a69f111bc1897b9048d9acbc290992f9 * asio: Fix crash when end() is called outside nghttp2 callback * nghttpx: Add --backend-connect-timeout option * nghttpx: Add TLS signed_certificate_timestamp extension support * nghttpx: Add --ecdh-curves option to specify list of named curves * h2load: Add --header-table-size and --encoder-header-table-size options ==== openvpn ==== - Require iproute2 explicitly. openvpn uses /bin/ip from iproute2, so it should be installed ==== p7zip ==== - Add CVE-2016-9296.patch to fix a null pointer dereference problem (CVE-2016-9296) ==== perl-DBD-mysql ==== Version update (4.040 -> 4.041) - updated to 4.041 see /usr/share/doc/packages/perl-DBD-mysql/Changes 2016-11-28 Patrick Galbraith, Michiel Beijen, DBI/DBD community (4.041) * Fix use-after-free for repeated fetchrow_arrayref calls when mysql_server_prepare=1 Function dbd_st_fetch() via Renew() can reallocate output buffer for mysql_stmt_fetch() call. But it does not update pointer to that buffer in imp_sth->stmt structure initialized by mysql_stmt_bind_result() function. That leads to use-after-free in any mysql function which access imp_sth->stmt structure (e.g. mysql_stmt_fetch()). This patch fix this problem and properly updates pointer in imp_sth->stmt structure after Renew() call. This is a medium level security issue to which the Debian security team assigned identifier CVE-2016-1251. Discovered and fixed by Pali Roh�r. * auto_reconnect now also matches CR_SERVER_LOST, previously this only matched CR_SERVER_GONE. Fixes http://bugs.mysql.com/bug.php?id=27613 Fix suggested by Wouter de Jong. * Fix compilation fixes (Pali Roh�r). ==== systemd ==== Subpackages: libsystemd0 libsystemd0-32bit libudev-devel libudev1 libudev1-32bit systemd-32bit systemd-bash-completion systemd-logger systemd-sysvinit udev - libudev-devel 32bit is needed for building 32bit wine now. ==== xfce4-vala ==== - fix build on Leap 42.2 (vala version 0.32) ==== xfdesktop ==== Version update (4.12.2 -> 4.12.3) Subpackages: xfdesktop-lang - update to version 4.12.3 - rotate wallpaper images if they contain rotation information - Settings: Fix loading of wallpaper previews - fix setting of wallpaper if monitor name contains whitespace - translation updates -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Upgrade Leap
by A. den Oudsten 01 Dec '16

01 Dec '16

Upgrading to 42.2 ran fine until retrieving 1301/2206 I was invited to insert the medium [openSUSE-42.2-0] After that I got the message File ´ ./suse/x86_64/libply-boot-client2-0.9.0-6.1x86_64.rpm´ not found on medium ´dvd:///´ Check of the DVD gave ´./suse/x86_64/libply-boot-client4-0.9.2-2.2x86_64.rpm´ How do I solve that difference? T.i.a. André den Oudsten -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] python3 for SLE12 SP2
by Axel Braun 01 Dec '16

01 Dec '16

Morning all, quick question to the maintainers of devel:languages:python3 - when will you add SLE12 SP2 as build target? Thanks Axel -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3