January 2013 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] "reboot" behaves like "kexec"
by Andrey Borzenkov 09 Jan '13

09 Jan '13

I have quite strange effect on current Factory installation. Any attempt to reboot (including systemctl --force --force reboot, which /should/ just directly execute syscall) behave as if I requested kexec. I never see usual firmware initial screen, or bootloader (GRUB2). After small delay I am presented with booting kernel. This is VMware Player running with EFI firmware. 12.2 is OK. Anyone experiences the same? -andrey -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 3

Re: [opensuse-factory] Tumbleweed: libqca2 breaks many
by Patrick Shanahan 09 Jan '13

09 Jan '13

Problem: libqca2-2.0.3-8.1.2.x86_64 requires libqt4 = 4.8.1, but this requirement cannot be provided uninstallable providers: libqt4-4.8.1-2.1.4.i586[openSUSE Current OSS] libqt4-4.8.1-2.1.4.x86_64[openSUSE Current OSS] libqt4-4.8.1-2.4.1.i586[openSUSE Current updates] libqt4-4.8.1-2.4.1.x86_64[openSUSE Current updates] Solution 1: Following actions will be done: downgrade of libqt4-4.8.4-7.1.x86_64 to libqt4-4.8.1-2.4.1.x86_64 downgrade of libqt4-x11-4.8.4-7.1.x86_64 to libqt4-x11-4.8.1-2.4.1.x86_64 downgrade of libqt4-qt3support-4.8.4-7.1.x86_64 to libqt4-qt3support-4.8.1-2.4.1.x86_64 downgrade of libqt4-sql-4.8.4-7.1.x86_64 to libqt4-sql-4.8.1-2.4.1.x86_64 downgrade of libsoprano4-2.8.0-3.2.x86_64 to libsoprano4-2.7.6-2.1.2.x86_64 downgrade of qt4-qtscript-0.2.0-2.9.x86_64 to qt4-qtscript-0.2.0-2.1.2.x86_64 downgrade of libstrigi0-0.7.7-8.4.x86_64 to libstrigi0-0.7.7-2.1.2.x86_64 install libstrigi0-0.7.7-2.1.2.x86_64 (with vendor change) http://packman.links2linux.de --> openSUSE downgrade of akonadi-runtime-1.8.1-2.3.x86_64 to akonadi-runtime-1.7.2-2.1.2.x86_64 downgrade of libakonadiprotocolinternals1-1.8.1-2.3.x86_64 to libakonadiprotocolinternals1-1.7.2-2.1.2.x86_64 downgrade of libkdecore4-4.9.5-7.2.x86_64 to libkdecore4-4.8.5-2.20.1.x86_64 downgrade of libqt4-sql-mysql-4.8.4-7.1.x86_64 to libqt4-sql-mysql-4.8.1-2.4.1.x86_64 deinstallation of nepomuk-core-4.9.5-5.1.x86_64 downgrade of libphonon4-4.6.0-4.1.x86_64 to libphonon4-4.6.0-3.2.2.x86_64 downgrade of libksuseinstall1-4.9.5-7.2.x86_64 to libksuseinstall1-4.8.5-2.20.1.x86_64 downgrade of libkdepim4-4.9.5-5.1.x86_64 to libkdepim4-4.8.5-2.12.1.x86_64 deinstallation of libkdcraw21-4.9.5-5.1.x86_64 downgrade of libkdepimlibs4-4.9.5-5.1.x86_64 to libkdepimlibs4-4.8.5-2.4.2.x86_64 downgrade of libQtWebKit4-4.8.4+2.2.0-6.1.x86_64 to libQtWebKit4-4.8.2+2.2.0-2.1.2.x86_64 downgrade of libkonq5-4.9.5-5.1.x86_64 to libkonq5-4.8.5-2.4.1.x86_64 deinstallation of libkipi9-4.9.5-5.1.x86_64 downgrade of libkde4-4.9.5-7.2.x86_64 to libkde4-4.8.5-2.20.1.x86_64 downgrade of libakonadi4-4.9.5-5.1.x86_64 to libakonadi4-4.8.5-2.4.2.x86_64 [...] and much more. Current libqt4 is 4.8.4-7.1 from "Tumbleweed (standard)" http://download.opensuse.org/repositories/openSUSE:/Tumbleweed/standard/ bug-report ?? -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 6

[opensuse-factory] Package deletion requested: gdome2, gtkmathview and gmetadom
by Dominique Leuenberger a.k.a. Dimstar 09 Jan '13

09 Jan '13

Hi Geekos! Instead of trying to fix gdome2 (which is likely not difficult neither), I decided to create delete requests for this package... its last release is from 2003 and nothing in Factory* makes use of it. * Well, every good rule has an exception: The two packages - gtkmathview - gmetadom depend on gdome2... even though they still build, they are outdated and useless... thus also requested for deletion. Any objections? Speak up now ! Best regards, Dominique / DimStar -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] gtkglext missing from factory
by Josef Reidinger 09 Jan '13

09 Jan '13

Hi, some project in games repository start failing as opensuse:Factory doesn't have gtkglext. Is it intention? I found that it is in 12.2 and cannot find in in opensuse:DROPPED. It is accident or intention? Thanks for answer Josef -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] new package Qore for Factory
by Petr Vanek 09 Jan '13

09 Jan '13

hi all, I'd like to introduce the suggested addons to factory: Qore programming language with its modules. Also I offer myself as a maintainer of these packages. About Qore: The Qore programming language is a powerful, thread-capable, embeddable, weakly-typed language with optional strong typing and procedural and object-oriented features designed for anything from quick scripting to complex multithreaded, network-aware application development to embedded application scripting. Qore was initially designed to facilitate the rapid implementation of sophisticated interfaces in embedded code in an enterprise environment, and has since grown into a general-purpose language as well. openSUSE profits: - 3rd party and/or end users scripts and apps written in Qore can run out of the box. - Qore is used in enterprise applications. It can allow using of openSUSE in this area. - we have feedback from various educational institutes where is Qore used for "concurrent programming" courses/lessons. It would open new area for openSUSE Currently it can be found in devel:languages:misc which would be a "devel' project for it. content: qore qore-asn1-module qore-freetds-module qore-glut-module qore-json-module qore-mysql-module qore-ncurses-module qore-opengl-module qore-pgsql-module qore-qt4-module qore-sqlite3-module qore-ssh2-module qore-uuid-module qore-xml-module qore-yaml-module including Qore in main repo would allow to build proprietary dependent parts in Packaman as well: qore-oracle-module thanks, petr vanek -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Status: Distribution
by Stephan Kulow 09 Jan '13

09 Jan '13

Hi, Unnoticed by many, we hit an important milestone: The start of my christmas vacation was also the start of the feature freeze. So we already see an increased number of "can I update FOO" discussions on this mailing list :) To avoid having to answer it a hundred times: The feature freeze is not black & white. What it means is that the before that date we update all packages to gain as many features as possible, after that we update only packages that are broken. So for every update I would love to have a justifcation to change it, balancing risks and benefits. I might not need to remind you, but we were a bit too lax with it for 12.2, so I for sure will hit the break more often this time. But it also means that I have no problem updating packages that bear little risks - _IF_ the submitter thought about the risks too and included testing in his justification. Factory itself does not shine, but is in a rather acceptable state for a freshly started stabilizing phase, heck we even have the latest perl! :) The bug reports for failing packages caused quite some action, thanks to Cristian for that. Right now we have around 50 failing packages, we had over 100 at that point of time for 12.2, so I'm pretty confident we won't run into delay issues. I still would like to finish the switch to 1G USB sticks for live media, hopefully for Beta1 - which *another suprise to many I assume* is planned for next week. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 7

[opensuse-factory] resurrect libpfm (openSUSE:Dropped)
by Tony Jones 08 Jan '13

08 Jan '13

I'd like to resurrect libpfm for openSUSE. Current version is 4.3.0 which supports perf_events only. Old dropped version was 3.52 (and included support for the perfmon2.X which now only exists in SLES). Partly this was driven by wanting to fix the PAPI packaging in SLES, also by a recent sr (that I rejected) to add papi-devel to oprofile (for Factory/ppc64). Oprofile 0.9.8 (for powerpc) requires libpfm. Currently this library is side-effect provided by papi, which contains it's own internal copy of libpfm (which isn't well versioned). I'd also like to follow Fedora and have papi depend on this external version of libpfm rather than it's internal version. I'm not certain it needs to be build-time switchable as it is in Fedora? The old dropped version of libpfm was using group Development/Tools/Debuggers. I'm thinking Development/Libraries/C and C++ (and Development/Libraries/Python for the swig bindings) makes more sense. Code changes are staged here: http://build.opensuse.org/project/show?project=home%3Ajones_tony%3Aoprofile… Thanks! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

5 7

[opensuse-factory] powertop update to 2.2
by Karsten König 08 Jan '13

08 Jan '13

Heihei, the powertop developers didn't make a proper announcement for 2.2, but it happend already on 15th nov. 2012 I updated it for Base:System 4 days ago, can it still be pushed to Factory? It's a leaf package and I've been running powertop 2.2 on oS 12.2 for about week now and it looks solid. Cheers, Karsten -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] Rolling factory distro?
by Andrey Borzenkov 08 Jan '13

08 Jan '13

Could someone explain package flow from base repo into factory? Let's say, package was updated in ... Base:System. When will updated package appear in Factory? Only during the next Milestone release? Is there something like "rolling factory" which includes all the latest package versions? If yes, where is the repo for it? And Wiki page of course ... TIA -andrey -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 5

[opensuse-factory] WINDOWMANAGER environment variable
by richard -rw- weinberger 08 Jan '13

08 Jan '13

Hi! On http://en.opensuse.org/openSUSE:SUSE_Studio_General_howtos#How_to_implement… I saw the following command: while true do WINDOWMANAGER=/home/tux/bin/start.sh startx done I've never seen nor used WINDOWMANAGER before. Is this variable (Open)SUSE specific? Which program evaluates it? The startx manapge does not mention it. -- Thanks, //richard -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] loginctl multiseat
by Damian Ivanov 08 Jan '13

08 Jan '13

Hi...again :) With recent Factory fully updated I still could not get multiseat to work on SuSE with the nice docking station stuff from plugable, with M2 I get a green screen, with Factory screen stays black. GDM is the display manager, ConsoleKitis removed. Any ideas? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 4

[opensuse-factory] factory-maintainer's auto-revoke. What's it?
by Cristian Morales Vega 07 Jan '13

07 Jan '13

Could someone explain me why we have the factory-maintainer's auto-revoke? We have perl-Sys-Virt failing for 26 days because it requires libvirt >= 1.0.0. The thing is that libvirt 1.0.0 is packaged in the Virtualization project, and it was submitted to Factory in the request #140771. The request got rejected because it removed patches without saying so in the changelog. No problem with that, but apparently the request was "auto-revoked"?? Why do we have that? We want the request creator to see the request rejected so he can fix any problem an resubmit. From my understanding of this auto-revoke thing, isn't it just hiding problems? One could then start making questions about why the request was created by "factory-maintainer" (and not by jfehlig, who did the package update). And how factory-maintainer *auto* revoked its *own* request and then forgot about it. But that probably would just confuse me... So could somebody just explain me what's the purpose of this auto-revoke feature? Am I misunderstanding it or it's really just hiding problems? And James, could you please add that explanation to the changelog (I guess the patches were just applies upstream?) and submit it to Factory? Thanks. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 3

[opensuse-factory] akonadi server
by ellanios82 07 Jan '13

07 Jan '13

Hello openSuSErs T'weed ______ from time to time , it seems that xlsclients get totally maxed-out by akonadi server : it becomes impossible to start any new program : for instance impossible to start Firefox .................... best regards -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Problem in running Snapper (ubuntu12.04)
by Narendra Pal Singh 07 Jan '13

07 Jan '13

Hi , I want to run opensuse snapper in Ubuntu12.04 I installed it properly and it shows version = '0.0.14' But when i run command to create configs , its giving error -------------------------------------------------------------------------------- #snapper -c root root create-config / Command 'create' does not take arguments. #snapper -c root create / Command 'create' does not take arguments. --------------------------------------------------------------------------------- #snapper -c home create-config /home Creating config failed (/sbin/chsnap not installed). #snapper -c home create /home Config 'home' not found. also Ubuntu12.04 is not allowing for installation of "libsnapper1" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 1

[opensuse-factory] Wiki does not provide repos for testing factory
by Patrick Shanahan 07 Jan '13

07 Jan '13

Isn't the repos necessary to test factory one bit of information that should be provided on the factory wiki page? http://en.opensuse.org/Portal:Factory -- (paka)Patrick Shanahan Plainfield, Indiana, USA HOG # US1244711 http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 http://en.opensuse.org openSUSE Community Member Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] More validator fun
by Jan Engelhardt 07 Jan '13

07 Jan '13

First a full disk, now /tmp* is gone? :) ---------- Forwarded message ---------- Subject: [obs submit-request 146816] openSUSE:Factory/canutils: declined by factory-auto State of submit-request #146816 was changed by factory-auto: review -> declined Comment: Output of check script: Source validator failed. Try "osc service localrun source_validator" mktemp: failed to create directory via template `/var/tmp/check_if_valid_source_dir-7SUGOd': No space left on device /work/cd/lib/source_validators/20-files-present-and-referenced: line 108: /tmp.spec: Permission denied /work/cd/lib/source_validators/20-files-present-and-referenced: line 109: /tmp.spec: Permission denied grep: /tmp.spec: No such file or directory grep: /tmp.spec: No such file or directory grep: /tmp.spec: No such file or directory /work/cd/lib/source_validators/20-files-present-and-referenced: line 120: /tmp.spec: Permission denied /work/cd/lib/source_validators/20-files-present-and-referenced: line 122: /tmp.spec: Permission denied /work/cd/lib/source_validators/20-files-present-and-referenced: line 126: /tmp.spec.2: Permission denied /work/cd/lib/source_validators/20-files-present-and-referenced: line 126: /tmp.spec.2: Permission denied /work/cd/lib/source_validators/20-files-present-and-referenced: line 126: /tmp.spec.2: Permission denied /work/cd/lib/source_validators/20-files-present-and-referenced: line 129: /sources: Permission denied error: failed to stat /tmp.spec: No such file or directory https://build.opensuse.org/request/diff/146816 Source project: network package: canutils revision: 1 Target: project: openSUSE:Factory package: canutils -- Hermes messaging (http://hermes.opensuse.org) openSUSE Build Service (https://build.opensuse.org/) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] opensuse-factory+confsub-7b1c880440c1d75e-narendrapal2020=gmail.com@opensuse.org
by Narendra Pal Singh 07 Jan '13

07 Jan '13

opensuse-factory+confsub-7b1c880440c1d75e-narendrapal2020=gmail.com(a)opensuse.org -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] Factory devel projects
by Kyrill Detinov 07 Jan '13

07 Jan '13

Hello. Where can I find a list of devel projects? I see in Wiki: https://en.opensuse.org/openSUSE:How_to_contribute_to_Factory#How_to_add_a_… "A list of the current devel projects can be found in the drop-down menu on top of this page[1]." Is there a list in plain text format anywhere? [1] https://build.opensuse.org/project/status?project=openSUSE%3AFactory -- WBR Kyrill

5 6

[opensuse-factory] rpm update to 4.10.2 still possible?
by Dirk Müller 07 Jan '13

07 Jan '13

Hi, while debugging a kiwi build issue I noticed that this is a bug in rpm 4.10, which we have in openSUSE Factory. It is already fixed in 4.10.2, which got released already a few weeks ago. I've updated the Factory rpm package to 4.10.2, which includes the bugfix that blocks ARM builds currently, but now I learned that we have already a version freeze for 12.3 in place. Looking at the changes between 4.10.0 and 4.10.2, all are serious bugfixes or regression fixes, one is even tagged as a security fix. so we'll likely end up with something very close to 4.10.2 anyway. The package is currently in devel:Factory:ARM and in openSUSE:Factory:ARM, as I need it to build proper images. Any recommendation? Thanks, Dirk -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

4 3

[opensuse-factory] glibc-locale is not installed by default
by Andrey Borzenkov 07 Jan '13

07 Jan '13

After installing current Factory (minimal text mode selection) I was presented with errors "cannot set locale en_US.UTF-8". glibc-locale was not installed indeed. Is it expected? It was not the case last time I tested installation, and definitely no on 12.2 where I also installed minimal text mode. -andrey -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] kernel-default-3.6.10-15.1.i586 : cannot see HDD SDA
by ellanios82 06 Jan '13

06 Jan '13

Hello List Tumbleweed : kernel-default-3.6.10-15.1.i586 __________ my system is on /dev/sdb which is 1 TB SATA HDD - i have a /dev/sda for backups, which is 360 GB PATA HDD .............. kernel-default-3.6.10-15.1.i586 does not allow me to mount /dev/sda kernel 3.4.6-2.10-desktop DOES allow mounting of /dev/sda & sees /dev/sda OK ................. - with kernel-default-3.6.10-15.1.i586 i get : command : _______ # mount /dev/sda4 /mnt mount: special device /dev/sda4 does not exist .................... [ because do not feel sufficiently 'advanced' to wrestle with bugzilla reports, since kernel 3.4.6-2.10 i have been hoping this trouble would be solved and 'go away', but, no such luck ] best regards Ellan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

10 27

[opensuse-factory] SELinux on openSUSE
by Vitezslav Cizek 04 Jan '13

04 Jan '13

Hello, You might have noticed that selinux-policy didn't build on Factory for a long time. Recently, some of the selinux tools and libraries were updated and especially the selinux-policy received a big update. If you want to give it a try, take a look at https://en.opensuse.org/SDB:SELinux You can find there the needed steps to start using SELinux on openSUSE. -- Vita Cizek

1 0

[opensuse-factory] Netinstall-CD
by Markus Koßmann 04 Jan '13

04 Jan '13

Today I've tried to install factory from openSUSE-NET-i586-Build0310-Media. The installation system missed to make device nodes for existing LVM volumes ( no /dev/system directory at all but lvscan listed them as existing) and the installation failed with error -4014 when trying to create a new lv ( looks like BNC 790724). Is there an installation media, which might not be affected by this bug or do I have to install 12.2 first and upgrade it to factory to get a new factory installation ? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

1 0

[opensuse-factory] How secure boot grub2 is going to find its configuration?
by Andrey Borzenkov 04 Jan '13

04 Jan '13

I am still not sure how secure grub2 is going to find its grub.cfg. Normally its location is dynamically added to core.img. In case of secure grub2 core.img is prebuilt and signed during package creation (or may be signed later, not sure). So it is impossible to store information about grub root directory there. The only place which can be guaranteed to be auto-detected is ESP itself. But it is not where grub2 related files are installed currently ... Do I miss something here? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2

[opensuse-factory] broadcom-wl connects only after sleep/wakeup
by Alin M Elena 03 Jan '13

03 Jan '13

Hi, I have this wireless broadcom card.. 02:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) Subsystem: Apple Inc. Device [106b:008d] Flags: bus master, fast devsel, latency 0, IRQ 21 Memory at d3200000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 35-fe-39-ff-ff-be-78-ca Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl unfortunately wl is the only driver that works for these models... tested both b43 and brcmsmac... with no luck. starting the computer (a laptop) totally fails to connect although the card is listed by /sbin/ifconfig if I suspend to ram and wake up... the card connects to the network without any issue... I did some digging and I have found that after suspend I have 3 extra kernel modules loaded (michael_mic arc4 and ecb) all crypto related. diff afterSleep.mod beforeSleep.mod 2,4d1 < michael_mic 12613 4 < arc4 12616 2 < ecb 12816 0 7c4 < af_packet 39587 6 --- > af_packet 39587 4 I have also attached the lsmod output before sleep and after wake up(beforeSleep.mod and afterSleep.mod) I have also added the journalctl output for the current boot (afterSleep.out) I have already read that michael_mic module shall be loaded by wpa_supplicant but for reasons beyond me fails to do so. /var/log/wpa_supplicant.log is empty for the failure case which makes me think wpa_supplicant is not even called... Alin -- Without Questions there are no Answers! ______________________________________________________________________ Alin Marin ELENA Advanced Molecular Simulation Research Laboratory School of Physics, University College Dublin ---- Ardionsamblú Móilíneach Saotharlann Taighde Scoil na Fisice, An Coláiste Ollscoile, Baile Átha Cliath ----------------------------------------------------------------------------------- http://alin.elenaworld.net ______________________________________________________________________

1 0

[opensuse-factory] Dropping ksymoops package from Factory and the Base:System repository
by Lars Müller 02 Jan '13

02 Jan '13

Hi, ksymoops fails to build for openSUSE Factory since quite some time. Following https://bugzilla.novell.com/show_bug.cgi?id=793544#c2 it doesn't make sense to offer ksymoops when the Linux kernel is built with KALLSYMS enabled. Therefore I'm going to drop the package and ask to get it removed from openSUSE Factory too. If one is willing to keep it please speak up in the next days. Cheers, Lars -- Lars Müller [ˈlaː(r)z ˈmʏlɐ] Samba Team + SUSE Labs SUSE Linux, Maxfeldstraße 5, 90409 Nürnberg, Germany

2 2

[opensuse-factory] openqa - zypper_up tests as failed other status listed as missing
by doiggl＠velocitynet.com.au 02 Jan '13

02 Jan '13

Hello, This page[1] lists the results for Build0xxx alot of tests showed zypper_up as failed. See attached. Cheers Glenn [1] http://openqa.opensuse.org/buildview/Build0302

1 0

[opensuse-factory] ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8
by Markus Koßmann 02 Jan '13

02 Jan '13

Everytime when grub2-branding-openSUSE is update, I'am getting: ( 6/32 ) Installation von: grub2-branding-openSUSE-12.3-1.16 ..............................[fertig] Zusätzliche rpm-Ausgabe: Generating grub.cfg ... Found theme: /boot/grub2/themes/openSUSE/theme.txt Found linux image: /boot/vmlinuz-3.7.0-1-desktop Found initrd image: /boot/initrd-3.7.0-1-desktop Found linux image: /boot/vmlinuz-3.7.0-1-default Found initrd image: /boot/initrd-3.7.0-1-default Found linux image: /boot/vmlinuz-3.6.3-1-desktop Found initrd image: /boot/initrd-3.6.3-1-desktop Found linux image: /boot/vmlinuz-3.6.3-1-default Found initrd image: /boot/initrd-3.6.3-1-default ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 ERROR: sil: invalid metadata checksum in area 4 on /dev/dm-8 Found Windows 7 (loader) on /dev/sda1 Found openSUSE 11.4 (x86_64) on /dev/sda6 Running fsck -f on that ext4 partition doesn't find any problem however. But on a clone of that partition done with dd that error also shows up. Even if it is not mounted. Very strange. Does anyone have an idea, what might cause that problem, how to fix it and ( if needed) to file a bug against what ? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

3 4

[opensuse-factory] Will we be using Dracut?
by Roger Luedecke 01 Jan '13

01 Jan '13

Dracut seems like a brilliant technology. Will we be using it? -- Roger A. Luedecke openSUSE Ambassador http://www.opensuseadventures.blogspot.com -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-factory+owner(a)opensuse.org

2 2