May 2011 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Can we expect OpenSUSE 12.1 Milestone 1 This Thursday?
by Roman Bysh 20 May '11

20 May '11

Hello all, Can we expect to see OpenSUSE 12.1 Milestone 1 uploaded for this Thursday's release? Cheers! Roman -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 6

[opensuse-factory] openFATE 312364 Mobile Broadband Wizard
by Roger Luedecke 20 May '11

20 May '11

https://features.opensuse.org/312364 I have made this feature request. I feel that something like this is critical. Though I am not the most saavy user, I have always been able to resolve a problem eventually. However this one i have been forced to concede defeat. A Wizard allowing easy setup and use of my mobile broadband would be greatly welcome, and I doubt I am the only user in this boat especially since netbooks are becoming more popular. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 5

[opensuse-factory] rpmlint status update
by Ludwig Nussel 20 May '11

20 May '11

Hi, Heads up and status update from the rpmlint front. rpmlint will soon be updated to version 1.2 in Factory. It brings one check that could turn out to be annoying: 'incorrect-fsf-address' warns about outdated or misspelled fsf addresses in files. That's usually something for upstream to fix. We'll see how many packages it catches. A new SUSE specific check warns about init scripts for runlevel 4. That runlevel is supposed to be admin defined so distro packages should not use it. Just remove the '4' from 'Default-Start'. The /var/run check got accepted upstream as non-ghost-in-var-run (was dir-or-file-in-var-run before). I plan to mark that check fatal in near the future as aaa_base now actually mounts tmpfs on /var/run so anything in there must be created at run time. You need to create files in /var/run at run time and mark them as %ghost in the package. Similarly 'non-ghost-in-var-lock' was introduced as /var/lock may use tmpfs too in the future. Packages should actually not use /var/lock at all. It's supposed to be only used for legacy device lock files (e.g. LCK..ttyS0). The new check 'non-position-independent-executable' is a port of prp-pie which in turn got dropped. All setuid binaries as well as network facing daemons should be compiled as position independent executables to make exploits more difficult. The list of binaries where this applies is manually maintained. So if anything is missing please let us know. Additionally we now have the possibility to make certain checks no longer filterable via package specific rpmlintrc. Initially that will be used for mandatory security checks. The shared library packaging policy is probably the next. If you are hit by this outside of Factory you can still get your package to build by setting the badness to zero¹ cu Ludwig [1] http://en.opensuse.org/openSUSE:Packaging_checks#Disarming_Fatal_Errors -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.de/ SUSE LINUX Products GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] On the insanity of the licensedigger bot
by Cristian Rodríguez 18 May '11

18 May '11

Hi: This fine piece of software keeps blindly rejecting package submissions for no reason whatsoever,license names that have been accepted for years now are instantly rejected,without human intervention. Will be cool if at least packages remain in state review after the bot has failed its dubious heuristics,so a human can look into it, instead of annoying developers at large. Cheers. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

12 22

Re: [opensuse-factory] New things in 12.1
by Andreas Jaeger 18 May '11

18 May '11

On Tuesday, May 17, 2011 17:49:35 Steven Sroka wrote: > >On 15 May 2011 08:37, Kim Leyendecker <kimleyendecker(a)hotmail.de> wrote: > > Am 15.05.2011 13:16, schrieb Sascha Manns: > >> Hello Mates, > >> > >> some Bloggers asked, which new things are planned for 12.1. Maybe we > >> have a Site for this topic? > > Is there a request to minimize the wave of 32-bit packages being > pulled in when a user tries installing certain 64-bit packages. Could you give an example of such packages, please? > I haven't run into this problem recently myself, but I still hear > people talking about once in a while. In that case ask them for the package that triggers this so that we can figure out why. There might be a valid reason - like flashplayer being a 32-bit instance... Andreas -- Andreas Jaeger, Program Manager openSUSE aj(a){novell.com,suse.com,opensuse.org} Twitter/Identica: jaegerandi SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] perl 5.14
by Stephan Kulow 18 May '11

18 May '11

Hi, I just submitted mls' perl 5.14 after checking the build failures in devel:languages:perl together with mls. I don't expect a huge problem from it, but it's hard to judge from test suites alone - so be warned. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] New FATE#312321: drop blowfish and switch to sha512 as default hash
by Thorsten Kukuk 17 May '11

17 May '11

Hi, long time ago, when glibc did only support DES crypt(), we added libxcrypt with blowfish support to have a better default hash for local accounts. Meanwhile, glibc supports sha256 and sha512, thus I filled FATE#312321 to change the default password hash to sha512, drop blowfish from YaST2 and remove libxcrypt from the distribution to avoid maintaining the same code twice. As result, you cannot create new password hashes with blowfish, but as long as we have the glibc patch, you can still login with the old hash. Thorsten -- Thorsten Kukuk, Project Manager/Release Manager SLES SUSE LINUX Products GmbH, Maxfeldstr. 5, D-90409 Nuernberg GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] xfprint&mousepad status (Tumbleweed broken packages)
by Jiri Slaby 17 May '11

17 May '11

Hi, these packages are broken in Tumbleweed: mousepad xfce4-panel-plugin-xfapplet xfprint It looks like all of them were deleted from factory (and moved to openSUSE:Dropped). As we have the latest xfce in Tumbleweed, I think those should be removed from Tumbleweed too, right? thanks, -- js suse labs -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] Unicode support differs between python and python3
by Michal Vyskocil 17 May '11

17 May '11

Hi all, I noticed a difference in unicode support between python and python3. The first one is built with ucs4 support, the later with ucs2 support. That means python3 behaves differently with characters up to 65535 (2**16-1), because with UCS2 support it returns two characters. $ python -c 'print(len(unichr((2**16-1))))' 1 $ python -c 'print(len(unichr((2**16+10))))' 1 $ python3 -c 'print(len(chr((2**16-1))))' 1 $ python3 -c 'print(len(chr((2**16+10))))' 2 I am not sure if this difference is intentional or not, so I'm asking here instead of bugzilla. Maybe this is intended, because you save 50% of memory for most of python programs and you need to port your code to python3, so it's not a big issue I'd say - see PEP 261 [1] for details. If so, then this should be mentioned in README.SUSE. I did a quick review of other distributions: * Debian use UCS4 from 2.3 and most probably in python3 as well - [2] * Fedora use USC2 in python [3] and UCS4 (I assume --with-wide-unicode is UCS4) in python3 [4] What's your opinion here? [1] http://www.python.org/dev/peps/pep-0261/ [2] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=171062 [3] http://pkgs.fedoraproject.org/gitweb/?p=python.git;a=blob_plain;f=python.sp… [4] http://pkgs.fedoraproject.org/gitweb/?p=python3.git;a=blob_plain;f=python3.… Regards Michal Vyskocil

2 1

[opensuse-factory] openssh + pki
by Hans Witvliet 17 May '11

17 May '11

Hi all, Any vague chance of getting the patch of Roumen Petrov applied? http://roumenpetrov.info/openssh/#features With this patch, one can enjoy the security feautures supplied digital certificates (crl, ocsp, ...), like the one's used by openssl, apache, openvpn, strongswan etc etc. pki support has been included for a long time in the commercial branch of ssh, but (i think) due to the conservative nature of the people of openbsd, who still seems to be in control of openssh, this patch never made it into the mainstream code Patch is around since 2006, and still kept up-to-date Hans -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Desktop notifier for AppArmor
by Roger Luedecke 16 May '11

16 May '11

Even SELinux has this. It is bad news for people unfamiliar with AppArmor if it decides to block something. The average casual home user will find the e-mail notification not only complicated, but largely unnecessary. The YaST modules make AppArmor management relatively simple, now we just need to make knowing they need to be used simple. Should I add this in openFATE also? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] tumbleweed 2.6.38.6 needs patching else kernel oops
by Jason Newton 15 May '11

15 May '11

This patch needs applied to be applied https://patchwork.kernel.org/patch/769162/ else it dies in ata_eh_set_lpm, at least on my desktop. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

7 20

[opensuse-factory] rpm emails
by Carlos E. R. 15 May '11

15 May '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Years ago, the installation of some packages sent emails to root, describing briefly the most important things to know. This is not done any more. Why? :-? I found it useful. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) iEYEARECAAYFAk3PzBQACgkQtTMYHG2NR9XjewCfe7LoGMeM2Zq6Jdw/DV0lKkUj ygkAoJCMnQsgBWsodoEaSNEoOP7Z4jqP =PuB+ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] Build failures in Factory
by Dimstar / Dominique Leuenberger 13 May '11

13 May '11

Hi, this morning, GCC 4.6 got checked in to be the default compiler in Factory. But apparently not the entire OBS knows about it, as it drags now gcc 4.5 AND 4.6 in, failing prety much everything building for Factory: installing insserv-1.14.0-25.1 installing libgcc45-4.5.2_20110419-2.1 installing libgcc46-4.6.0_20110328-2.1 file /lib/libgcc_s.so.1 from install of libgcc46-4.6.0_20110328-2.1.i586 conflicts with file from package libgcc45-4.5.2_20110419-2.1.i586 exit ... [ 30.698908] SysRq : Power Off [ 33.554538] Power down. Is this already on the radar of somebody? Dominique -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 4

[opensuse-factory] Netsurf
by Larry Stotler 12 May '11

12 May '11

I managed to compile Netsurf & get it running. Was a bit of a pain tho. Current version is 2.7. I saw here: https://build.opensuse.org/package/show?package=netsurf&project=network%3Au… that it doesn't seem to be buildable. However, I'm running 11.0/x64, so I don't know if that's a plus or not. Looks like Pascal was working on it. Any chance of getting it into factory? Anyone else use this? Just wondering if there are any issues. It lacks javascript, so AOL Mail doesn't work(I happen to have a netscape.net address that I don't want to give up). -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Claws Mail users: beware of the libstartup-notification-1-0 update!
by Stefan Seyfried 11 May '11

11 May '11

Hi, see https://bugzilla.novell.com/show_bug.cgi?id=693197 - I'd download the 0.10 version that is still in factory-tested before updating so that you can revert it in case you hit the same bug. Good luck :-) -- Stefan Seyfried "Dispatch war rocket Ajax to bring back his body!" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] How do I go about submitting openCOLLADA--svn839 to 11.4 update?
by Dave Plater 11 May '11

11 May '11

I've finally finished polishing the openCOLLADA collada import/export libraries with a bit of help from Fedora and cmake and it's now in Factory. I can either push it to Packman where an ffmpeg blender-2.57b is destined or tumbleweed to take care of <= 11.3 but it was suggested that I push it as an update to 11.4 due to "undefined-non-weak-symbol"s present in older scons builds. What and how do I do? Suggestions and guidance are welcome. Dave P P.s. I'm also wondering when python3-3.2 is going to factory, this is needed by blender, I have to patch to build with py3.1. I'm busy pleading with the Packman folks to allow me to push it there. Blender and a couple of minor gnome apps are all that use python3, 3.2 is totally backward compatible with 3.1 the blender devs managed to replace pages of 3.1 code with a few lines of 3.2 code so one can understand why they have no wish to use py3.1. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] networkmanager and dispatcher.d
by Alin Marin Elena 11 May '11

11 May '11

Hi, I use a small dispatcher script to add a link-local route to my machine. baphomet:/etc/NetworkManager/dispatcher.d # cat z01-link-local #! /bin/sh # # link-local dispatcher script for NetworkManager # # Alin M Elena <alinm.elena(a)gmail.com> # . /etc/rc.status case "$2" in up) /sbin/route add -net 169.254.0.0/16 dev $1 ;; down) /sbin/route del -net 169.254.0.0/16 dev $1 ;; *) exit 0 ;; esac this works like a charm on my 11.4 with nm 0.8.2-15.20.1 it gets in trouble on factory with nm 0.8.2-15.20.1 I did some debugging and I found out that $1 is empty for the case of new nm.... is this the expected behaviour and I miss something? Alin -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 9

[opensuse-factory] Problem updating to KDE 4.6.3 on a x86_64 system with Tumbleweed
by Freigeist 10 May '11

10 May '11

Hi All, since May 9th KDE 4.6.3 has been added to tumbleweed. It seems that the tumbleweed repo data for x86_64 is pointing to the i586 repo. When I try to update to KDE 4.6.3 on my x86_64 system with zypper I get the following output: --------------------------------------------------------------- zypper dup --from Tumbleweed Loading repository data... Reading installed packages... Computing distribution upgrade... 120 Problems: Problem: nothing provides libpython2.7.so.1.0 needed by python-sip-4.12.2-6.1.i586 Problem: nothing provides libpython2.7.so.1.0 needed by python-qt4-devel-4.8.4-2.1.i586 Problem: hplip-3.11.1-6.1.x86_64 requires python-qt4, but this requirement cannot be provided Problem: ksmolt-0.2.3-9.1.noarch requires python-kde4, but this requirement cannot be provided Problem: nothing provides libphonon.so.4 needed by plasma-addons-4.6.3-1.1.i586 Problem: nothing provides libphonon.so.4 needed by okular-4.6.3-1.1.i586 Problem: nothing provides libphonon.so.4 needed by mono-qt-4.6.3-1.1.i586 Problem: nothing provides libphonon.so.4 needed by libsmoke2-4.6.3-1.1.i586 Problem: synaptiks-0.4.0-9.2.x86_64 requires libqt4-x11 >= 4.7.1, but this requirement cannot be provided Problem: nothing provides libmysqlclient_r.so.16 needed by libqt4-sql-mysql-4.7.3-166.1.i586 Problem: nothing provides libexiv2.so.9 needed by libkexiv2-9-4.6.3-1.1.i586 Problem: nothing provides libical.so.0 needed by libkdepimlibs4-4.6.3-1.1.i586 Problem: nothing provides libassuan.so.0 needed by libkdepim4-4.4.11.1-1.1.i586 Problem: nothing provides libgomp.so.1 needed by libkdcraw9-4.6.3-1.1.i586 Problem: nothing provides libphonon.so.4 needed by libkcompactdisc4-4.6.3-1.1.i586 Problem: nothing provides libmusicbrainz3.so.6 needed by libkcddb4-4.6.3-1.1.i586 Problem: nothing provides libphonon.so.4 needed by libakonadi4-4.6.3-1.1.i586 Problem: nothing provides libphonon.so.4 needed by kscd-4.6.3-1.1.i586 Problem: nothing provides libvncclient.so.0 needed by krdc-4.6.3-1.1.i586 Problem: nothing provides libphonon.so.4 needed by kpat-4.6.3-1.1.i586 Problem: nothing provides libphonon.so.4 needed by korganizer-4.4.11.1-1.1.i586 Problem: nothing provides libphonon.so.4 needed by kopete-4.6.3-1.1.i586 Problem: nothing provides libtidy-0.99.so.0 needed by konqueror-plugins-4.6.1-25.1.i586 Problem: nothing provides libphonon.so.4 needed by kmousetool-4.6.3-1.1.i586 Problem: nothing provides libphonon.so.4 needed by kmix-4.6.3-1.1.i586 Problem: nothing provides libphonon.so.4 needed by kmail-4.4.11.1-1.1.i586 Problem: nothing provides libcdda_interface.so.0 needed by kio_audiocd-4.6.3-1.1.i586 Problem: nothing provides libsoprano.so.4 needed by kget-4.6.3-1.1.i586 Problem: nothing provides libpam.so.0 needed by kdm-4.6.3-1.1.i586 Problem: konversation-1.3.1-7.10.1.x86_64 requires kdepim4-runtime, but this requirement cannot be provided Problem: nothing provides libstreamanalyzer.so.0 needed by kdepim4-4.4.11.1-1.1.i586 Problem: nothing provides libstreamanalyzer.so.0 needed by kdegraphics4-4.6.3-1.1.i586 Problem: nothing provides libsensors.so.4 needed by kdebase4-workspace-ksysguardd-4.6.3-1.1.i586 Problem: plasmoid-quickaccess-0.8.1-9.2.x86_64 requires kdebase4-workspace, but this requirement cannot be provided Problem: skanlite-0.7.kde4.5.0-3.1.x86_64 requires kdebase4-runtime >= 4.6.0, but this requirement cannot be provided Problem: nothing provides libphonon.so.4 needed by kdebase4-libkonq-4.6.3-1.1.i586 Problem: nothing provides libgmp.so.10 needed by kcalc-4.6.3-1.1.i586 Problem: nothing provides libexiv2.so.9 needed by hugin-2010.4.0-13.1.i586 Problem: nothing provides libphonon.so.4 needed by gwenview-4.6.3-1.1.i586 Problem: patterns-openSUSE-kde4_basis-11.4-6.9.1.x86_64 requires dolphin, but this requirement cannot be provided Problem: nothing provides libphonon.so.4 needed by digikam-1.9.0-71.3.i586 Problem: nothing provides libattica.so.0 needed by choqok-1.1-25.1.i586 Problem: nothing provides libarchive.so.2 needed by ark-4.6.3-1.1.i586 Problem: nothing provides libsoprano.so.4 needed by akonadi-runtime-1.5.3-90.1.i586 Problem: python-kde4-4.6.0-3.2.x86_64 requires libkde4 = 4.6.0, but this requirement cannot be provided Problem: NetworkManager-kde4-0.9.svn1192577-7.2.x86_64 requires libkdecore.so.5()(64bit), but this requirement cannot be provided Problem: NetworkManager-kde4-libs-0.9.svn1192577-7.2.x86_64 requires libQtCore.so.4()(64bit), but this requirement cannot be provided Problem: amarok-2.4.0-8.11.3.x86_64 requires libksuseinstall.so.1()(64bit), but this requirement cannot be provided Problem: kbackup-0.7.1-3.1.x86_64 requires libQt3Support.so.4()(64bit), but this requirement cannot be provided Problem: kipi-plugins-1.8.0-5.2.x86_64 requires libkipi.so.8()(64bit), but this requirement cannot be provided Problem: knights-2.3.1-1.1.x86_64 requires libkdegames.so.5()(64bit), but this requirement cannot be provided Problem: kpackagekit-0.6.3.3-6.11.1.x86_64 requires libQtSql.so.4()(64bit), but this requirement cannot be provided Problem: kwebkitpart-1.1.0-3.2.x86_64 requires libQtWebKit.so.4()(64bit), but this requirement cannot be provided Problem: nothing provides libmng.so.1 needed by libqt4-x11-32bit-4.7.3-8.1.x86_64 Problem: libqoauth1-1.0.1-3.1.x86_64 requires libqca.so.2()(64bit), but this requirement cannot be provided Problem: kdebase4-runtime-4.6.0-4.9.1.x86_64 requires kdelibs4 >= 4.6.0, but this requirement cannot be provided Problem: nothing provides libpolkit-qt-core-1.so.1 needed by kdelibs4-core-4.6.3-1.2.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: digikam-lang-1.9.0-71.3.noarch requires digikam = 1.9.0, but this requirement cannot be provided Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: kdebase4-workspace-4.6.0-10.15.1.x86_64 requires kde4-kgreeter-plugins = 4.6.0, but this requirement cannot be provided Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: kdeartwork4-desktopthemes-4.6.3-1.1.noarch requires kdebase4-runtime >= 4.6.3, but this requirement cannot be provided Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libphonon.so.4 needed by kdebase4-workspace-4.6.3-1.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libphonon.so.4 needed by kdebase4-runtime-4.6.3-1.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libphonon.so.4 needed by kdebase4-runtime-4.6.3-1.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: kdepim4-runtime-4.4.10-4.7.1.x86_64 requires libakonadiprotocolinternals.so.1()(64bit), but this requirement cannot be provided Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: libepub0-0.2.1-21.1.i586 requires libzip.so.1, but this requirement cannot be provided Problem: konqueror-plugins-lang-4.3.1-11.14.2.noarch requires konqueror-plugins = 4.3.1, but this requirement cannot be provided Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: kipi-plugins-lang-1.8.0-5.2.noarch requires kipi-plugins = 1.8.0, but this requirement cannot be provided Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libphonon.so.4 needed by libsmoke2-4.6.3-1.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libphonon.so.4 needed by python-kde4-4.6.3-1.1.i586 Problem: nothing provides libpython2.7.so.1.0 needed by python-sip-4.12.2-6.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-4.7.3-8.1.i586 Problem: nothing provides libmng.so.1 needed by libqt4-x11-32bit-4.7.3-8.1.x86_64 Problem: NetworkManager-openvpn-kde4-0.9.svn1192577-7.2.x86_64 requires libQtCore.so.4()(64bit), but this requirement cannot be provided Problem: liblastfm0-0.3.0-7.2.x86_64 requires libQtSql.so.4()(64bit), but this requirement cannot be provided Problem: knights-lang-2.3.1-1.1.noarch requires knights = 2.3.1, but this requirement cannot be provided Problem: nothing provides libpython2.7.so.1.0 needed by python-sip-4.12.2-6.1.i586 Solution 1: Following actions will be done: deinstallation of python-sip-4.12.1-3.1.x86_64 deinstallation of python-qt4-4.8.3-3.2.x86_64 deinstallation of backintime-kde-1.0.6-1.pm.1.1.noarch deinstallation of smolt-gui-1.4.3-1.6.1.noarch Solution 2: keep obsolete python-sip-4.12.1-3.1.x86_64 Solution 3: break python-sip by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/3/s/r/c] (c): c --------------------------------------------------------------- Taking a peek into the repo at http://download.opensuse.org/repositories/openSUSE:/Tumbleweed/standard/x86… shows that no kde 4.6.3 packages are present. thanks Andreas -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] Is darcs in Factory really for 11.4?
by Randall A Sindlinger 09 May '11

09 May '11

Hello, We have some folks using darcs under OpenSuSE 11.2, from the build service. We're preparing for the annual upgrade to 11.4, but there is no darcs there. However, there is a Factory version in devel:tools:scm/openSUSE_Factory Did the darcs package miss getting moved to 11.4 in OBS, or is it still actually in development? Thanks, -Randall -- Randall Sindlinger Systems Programmer, CETS School of Engineering and Applied Science University of Pennsylvania -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] subscribe
by Michal Vyskocil 09 May '11

09 May '11

s -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] hugin added to Tumbleweed
by Greg KH 08 May '11

08 May '11

Due to a mixup in my email system here, someone had asked me to add Hugin to Tumbleweed, but I lost their email (too many different devices all accessing the same imap server makes for a mess at times). So, just a general announcement that I've added hugin and libpano to Tumbleweed at the request of that person. thanks, greg k-h -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Tumbleweed and KSplice
by R. Tyler Croy 08 May '11

08 May '11

I've been testing and using Tumbleweed (with the intent on reviewing and recommending it on omgsuse.com) for a couple of weeks now and I've noticed a couple things: * LibreOffice seems to be updated ... all the time * Kernel updates *screw things up* for users I've run into the scenario a couple of times where my `zypper dup --from Tumbleweed` upgrades my kernel, and then before I can get around to a reboot, I need to log onto VPN or mount a FAT32 device. Both scenarios involving loading a kernal module that previously wasn't loaded. Has there been any discussion about incorporating KSplice with Tumbleweed for a truly seamless rolling distro? I'm conceptually familiar with KSplice as a technology and the "enterprise" service with supported kernels, but I'm not aware of too many folks using their technology "independent" of KSplice, Inc. For reference: <http://www.ksplice.com/software> Thoughts/flames? :) Cheers - R. Tyler Croy -------------------------------------- Code: http://github.com/rtyler Chatter: http://identi.ca/agentdero http://twitter.com/agentdero

3 2

[opensuse-factory] Tumbleweed libreoffice dep
by Vahis 07 May '11

07 May '11

I've seen this during a couple of days: Problem: patch:libreoffice-languagetool-4436.noarch conflicts with libreoffice-languagetool-en.noarch < 1.2-6.7.2 provided by libreoffice-languagetool-en-1.2-1.14.noarch Solution 1: Following actions will be done: install libreoffice-languagetool-en-1.2-6.7.2.noarch (with vendor change) obs://build.opensuse.org/openSUSE:Tumbleweed --> openSUSE install libreoffice-languagetool-1.2-6.7.2.noarch (with vendor change) obs://build.opensuse.org/openSUSE:Tumbleweed --> openSUSE Solution 2: do not install patch:libreoffice-languagetool-4436.noarch -- Vahis -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 8

[opensuse-factory] Enabling haveged by default?
by Jeff Mahoney 07 May '11

07 May '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all - I just removed the network device entropy-generating patches from the kernel repo. They had to be explicitly enabled for use and were consistently refused for upstream acceptance. With no better hardware entropy source, they kept the pool full but are prone to third party manipulation via packet flooding. I noticed that since 11.4, we have installed haveged by default. Might it be a good idea to enable it by default as well? Perhaps someone with more experience with it can chime in, but it looks like it stays dormant until the entropy pool drops too low so there's not a lot of overhead. - -Jeff - -- Jeff Mahoney SUSE Labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.17 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAk3Ei1wACgkQLPWxlyuTD7I81gCgoNGDYFT7/4VjQ8a6Yl+Du2PE riMAn0h3eFOVU3BdVVHPqqMyI/S1iDB1 =XyDt -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 6

[opensuse-factory] RFC: forbid _service files
by Stephan Kulow 05 May '11

05 May '11

Hi, After a series of broken packages because of _service files I would like to forbid them in openSUSE:Factory. So far I've seen the use of _service files in factory as an experiment (I happily joined), but I see this experiment as failed. What I would like to propose is: - ban recompress, download and tarscm as _services (everything else should have been banned before) - instead we verify the Source urls and make packages that have invalid URLs "broken", so you can't SR them to factory. This means: the Source URL is now an important thing to change and no longer a bit rotting comment and we stop recompressing tars - this was a proposal from Adrian a while ago without much objection. Please comment or I will go forward. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

15 34

[opensuse-factory] Tumbleweed KDE problems being reverted
by Greg KH 05 May '11

05 May '11

Hi all, Well, so much for the KDE update in Tumbleweed. Due to some problems with it (i.e. I messed up and accidentally updated some packages to the 4.6.3 version while the rest were at 4.6.2), I've reverted it all, so soon everyone will see a big "downgrade" to the openSUSE 11.4 version of the KDE packages. I'll watch the 4.6.3 update and wait for that to settle down before adding it to Tumbleweed again. Sorry for the churn, but hey, due to the magic of zypper, this all "just works" even for downgrades. If anyone has any questions about this, please let me know. thanks, greg k-h -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] [Tumbleweed] Missing KDE packages
by Sven Zallmann 05 May '11

05 May '11

Howdy folks, As of today, the KDE packages in Tumbleweed seem to be incomplete and/or some of them obsolete. Upon wanting to 'zypper dup' I found two packages making trouble: * libqt4-sql 4.7.3 (required by libqt4-sql-mysql 4.7.3, which is present in the repo). Tumbleweed repo carries libqt4-sql 4.7.2. * konqueror-plugins-lang 4.6.1, not present. Please provide this or any other version to match konqueror-plugins 4.6.1 present in the repo. Hearing about the status of these packages will be greatly appreciated. Thank you for your attention. Kind regards Sven 'szal' Zallmann -- This email is best viewed in text mode using a monospaced font. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 4

[opensuse-factory] new package js for Factory
by Wolfgang Rosenauer 05 May '11

05 May '11

Hi, because of the changing release and focus changes within the Mozilla project, (it's likely that) Mozilla XULRunner won't be maintained anymore. Therefore we are going to ship a pretty static Firefox again (even with libmozjs compiled into the the big xul blob). In the past some people expressed interest to have a decent standalone JS interpreter library available for linking into certain packages. With the above mentioned changes it's now time to create that one instead of exposing the xulrunner included one. I've prepared an initial Spidermonkey (JS 1.8.5 as included in Firefox 4) package in mozilla:Factory and propose to add it to Factory. It would be nice to get some feedback from maintainers who could make use of it if it works for them as currently packaged or if there are any changes needed. Also please tell me if it's not needed at all in case ;-) Wolfgang PS: I'm not going to use that as base for the Mozilla applications for some reasons though. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] Call for Participation: FHS Relaunch
by Robert Schweikert 05 May '11

05 May '11

The LSB workgroup is preparing FHS 3.0, which will be the first FHS release since 2004. As part of that release, we are soliciting contributions from all interested parties. Our goal is to release FHS 3.0 by July 1 if possible. How to contribute: - We are continuing to use the old FHS Bugzilla, at http://bugs.linuxfoundation.org/. Please file any new bugs under the "FHS" product. If you have filed a bug there in the past, we will evaluate it shortly. If you have any additional information to provide, feel free to add comments to any of the bugs listed there. - We will monitor the distributions@ list, lsb-discuss, and the new fhs-discuss mailing list for feedback (see below regarding the latter). Feedback from the lists will likely end up being tracked as bugs in Bugzilla. - We have set up a new version control repository for the DocBook source to the FHS. It uses Bazaar, and can be found at http://bzr.linuxfoundation.org/lsb/devel/fhs-spec. This can be useful for submitting proposed changes to the spec as patches. - We have a new mailing list for the FHS, fhs-discuss. You can learn more, subscribe, and see archives here: https://lists.linux-foundation.org/mailman/listinfo/fhs-discuss - Finally, we have set up a new reference specification section for the FHS at the Linux Foundation's specification page: http://refspecs.linuxfoundation.org/fhs.shtml Please feel free to forward this message to anyone who might be interested, or point them to the FHS Web page we've set up: http://www.linuxfoundation.org/collaborate/workgroups/lsb/fhs -- Robert Schweikert MAY THE SOURCE BE WITH YOU SUSE-IBM Software Integration Center LINUX Tech Lead rschweikert(a)novell.com rschweikert(a)ca.ibm.com 781-464-8147 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] GCC 4.6 for 12.1
by Jeff Mahoney 05 May '11

05 May '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all - I know someone else mentioned this briefly WRT to Tumbleweed, but I'd like to bring up for discussion the adoption of gcc 4.6 for Factory. A bit of background. We currently maintain a kernel-trace flavor to allow people to make use of the tracing facilities. Historically, there has been overhead associated with these, which is why they were in their own flavor. Most users don't care about them, so there's no sense in slowing everyone down to satisfy them. Over time, the maintainers of these facilities have worked to lower the overhead to the point where now dynamic ftrace only adds memory overhead. It uses gcc's profiling facility to call out to a function at the beginning of every function call to allow tracking. At boot, this is a function that returns immediately but during the boot process those calls are hot-patched to nop operations so that they carry virtually zero runtime overhead. This sounds great, right? There's one last bit, and that is actually the reason why ftrace is still disabled in our regular kernel flavors. The compiler's profiling feature calls the profiling function after the function prologue. That means that the stack pointer has already been advanced and since it can advance a different amount based on the needs of each function, we don't have an easy way to get the caller's stack frame back. It's needed to resolve where the caller was called from and the only way to do that is to dedicate a register to track the start of the current stack frame. Dedicating a register for this increases register contention and forces more accesses to CPU cache or main memory, slowing everything down. So, it's not worth it when most users will never actually take advantage of the feature that requires it. For some time, I've been trying to come up with ways to work around this so that the fast path stays fast and the tracing path takes any performance hit necessary. Until recently, the performance hit would've been too big to make it worthwhile. With gcc 4.6, we have the -mfentry option which moves the call to the profiling function *before* the function's prologue. This means that the caller's stack frame is still intact and we can resolve the caller's parent without issue. I've spent the past few days working up a proof of concept that takes advantage of this and doesn't require a dedicated register. It turns out that Steven Rostedt has already posted a patch set to do exactly this and he's targeting 2.6.40 for inclusion in the mainline kernel. For now it looks like it's x86-64 only but it should be ok for i386 as well. This would go a long way to eliminate the -trace flavor from our kernel packages. The benefits are multiple: It eliminates the maintenance of another kernel flavor, but it also allows everyone to use tracing facilities without installing a separate kernel release to do so. One last bit is needed, though, and that is for gcc to allow using -pg - -mfentry with -fomit-frame-pointers. Once that bit is taken care of then we can rid the kernel of the frame pointer requirement for ftrace and eliminate the -trace flavor entirely. - -Jeff - -- Jeff Mahoney SUSE Labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.17 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAk263RwACgkQLPWxlyuTD7JhyQCfXcCcDjH0dYmnoguTCe+7J2FH YWkAn3+K1qintX3acivGSmUYCDVnDuqi =3BMz -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

12 23

[opensuse-factory] Dependency problem in Tumbleweed min repo
by John Andrews (swerdna) 05 May '11

05 May '11

Hi I've got 11.4-based Tumbleweed (with KDE 4.6.2 and also 64 bit) and have just updated with "zypper dup --from Tumbleweed". All went well except for this statement from zypper: Problem: nothing provides libqt4-sql = 4.7.3 needed by libqt4-sql-mysql-4.7.3-166.1.i586 Solution 1: deinstallation of libqt4-sql-mysql-4.7.2-165.1.x86_64 Solution 2: keep obsolete libqt4-sql-mysql-4.7.2-165.1.x86_64 Solution 3: break libqt4-sql-mysql by ignoring some of its dependencies I can't find libqt4-sql (4.7.3) in search page of software.opensuse.org. Any suggestions? Thanks John -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] every TV app fails
by Donn Washburn 04 May '11

04 May '11

Hey Group; Does anyone have a TV app that works. TVtime, xawtv, motv (KWintv is not available to try) are just some that fail. It seems they all fail due to framebuffers and/or KDE volume control. So does anyone know of one that works with a pci analog tv card on openSuSE 11.4 -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Skype:n5xwbg BMWMOA #:4146 Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] perl-Bootloader log is HUGE (slow kernel installation?)
by Felix Miata 04 May '11

04 May '11

http://fm.no-ip.com/Tmp/SUSE/114/pbl-tail-gx150-114.txt This is roughly 95% of a 20,000 line tail from a 11.4 /var/log/YaST2/perl-BL-standalone-log, the portion created by today's zypper rm one kernel followed by zypper in one kernel. It's 1783595 bytes. That seems outlandishly large. The whole file dates back to 11.0, since this has been a Factory installation only upgraded in all that time. It's total size is 33403K. Notwithstanding that it would be a fraction of that size if ever 11.4 had been installed fresh, nevertheless it looks from my perusal and seeing references to an abundance of noauto NFS fstab entries like PBL is doing some unnecessary things, and why it seems to take an awfully long time to install a new kernel. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] http://www.suse.de/~coolo/opensuse_12.1/
by Stephan Kulow 04 May '11

04 May '11

Hi, I took the dates from above and put them as preliminary schedule into http://en.opensuse.org/openSUSE:Roadmap, but I know already that 2 of the milestones are when I'm out of office. So I need volunteers to drive those releases. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] USB devices not enumerated
by Bruce Ferrell 04 May '11

04 May '11

I have a system running 11.4/Tumbleweed with the following kernel 2.6.37.6-0.5-desktop #1 SMP PREEMPT 2011-04-25 21:48:33 +0200 i686 i686 i386 GNU/Linux No USB devices seem to be recognized by the running system, but are recognized at boot time as storage devices seem to screw up the boot sequence in the initrd so I think the hardware is running. lsusb shows the roothub as 1.1 but nothing else. Does anyone have a suggestion as to what I can look at to diagnose this further? Thanks in advance, Bruce Ferrell -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] Where to file bugs against licensedigger?
by Vincent Untz 03 May '11

03 May '11

Hi, There's a new review step done when packages are submitted to Factory (maybe just for updates that look like a new branch of a package), that checks the licenses of the package. That's all call, except that it doesn't handle well forwarding packages with a _service: "reject": "checkout failed: _service file without _service:* files" That's most probably because the review script was run before the build service ran the services. A potential solution for that would be to try again five minutes later, I guess. Where should I file that? Cheers, Vincent -- Les gens heureux ne sont pas pressés. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 6

[opensuse-factory] gtkglextmm-devel and 11.4
by todd rme 03 May '11

03 May '11

I need the gtkglextmm-devel package to build a program I want. It seems to be available for every openSUSE release besides 11.4. Is there a particular reason this package is incompatible with openSUSE 11.4? -Todd -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] grub 2 for 12.1??
by jdd 03 May '11

03 May '11

Hello, Do you know if grub 2 will be used in 12.21? (I have a lot of problems with grub that I wont try to fix if it become obsolete :-) thanks jdd -- http://www.dodin.net http://www.youtube.com/user/jdddodinorg http://jdd.blip.tv/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] Tumbleweed kernel - warning no X
by Greg Freemyer 03 May '11

03 May '11

All, Just a warning that I just updated my Tumbleweed install today. It has been a few weeks since I did it last, but the 2.6.38.4 kernel failed to allow X to work. See my new bug: https://bugzilla.novell.com/show_bug.cgi?id=691322 Resolution was as simple as rebooting and selecting the 2.6.38.2 kernel which Tumbleweed left in the grub menu. Thanks Greg -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 4

[opensuse-factory] incomplete tumbleweed instructions
by Felix Miata 02 May '11

02 May '11

picture worth many words: http://fm.no-ip.com/SS/opensusedotorg-too-narrow.jpg IOW, rhetorically speaking, what URL goes in the repo file? I just copy a copy of http://download.opensuse.org/repositories/openSUSE:/Tumbleweed/standard/ope… from my network server to whatever 11.4 installation needs Tumbleweed added. But, what about new people not fully knowledgeable about overcoming dumb web page design? Why do web page designers insist on arbitrary widths that can't hold their content, and don't allow overflow to be accessible? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Problems connecting from Factory, through SSH, to Windows servers
by Silviu Marin-Caea 02 May '11

02 May '11

I'm having problems with connection through ssh to Windows servers (for example CopSSH and F-Secure SSH) It only happens on my Factory machine. It'a clean installation, clean home-directory. Connections from Factory machine to other Linux servers (SLES9,10,11) work fine. Connections from other Linux machines (SLES9) to those Windows servers also work. The error message is: Read from socket failed: Connection reset by peer Couldn't read packet: Connection reset by peer Port is open, "telnet winhost 22" gives me the identification of the SSH server. I'm writing here to clarify to myself that this is a bug and not some change in the new openssh client that requires an option which wasn't needed before... So, can anyone try this? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Package xlogmaster
by Sascha Manns 02 May '11

02 May '11

Hello Mates, as you maybe heard, we're excluding the openSUSE:Factory:Contrib packages to different devel projects. Now i'm thinking about the package xlogmaster. This package based on gtk1 which we doesn't provide in 11.3, 11.4 and Factory. So my question is, should we just remove it? Do you know persons who using this? cu Sascha -- Sincerely Yours Sascha Manns open-slx Community & Support Agent openSUSE Membership Comitee openSUSE Marketing Team Web: http://saigkill.homelinux.net German Community Portal: http://community.open-slx.de -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 3

[opensuse-factory] How to push GNOME 3 to Factory?
by Vincent Untz 02 May '11

02 May '11

Hi, Today, hopefully, we'll finish the review of GNOME 3 packages for G:F. There's some integration work to do and patches to rebase (we filed bugs for all of those), but I believe none of this should block a push to Factory. If the testing of G:F goes well this week, I'd like to do the push at the end of the week. I'd like to hear what people think is best to deal with this push, as it will be a big push, that needs to be handled with some care: + some package have really a lot of changes, and it's painful to review that (which is partly why it took so much time to review the changes) + there are some new packages we can't submit before the push because they will cause issues in Factory (eg, providing a library that exist in another package in Factory) + there are some new packages that are just the 2.x/3.x branches of existing packages (gtkmm2 vs gtkmm3, for example) + we probably will need a rebuild of everything since it'll be hard to push/accept packages in the best order in terms of build dependencies + if we need to freeze Factory soon (for a milestone, eg), we can't have half of the packages accepted and the other half rejected Do you have any opinion on what's best? Should we just push everything as usual, or do you want us to take some extra care in some way? Thanks, Vincent -- Les gens heureux ne sont pas pressés. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

9 17

[opensuse-factory] download.opensuse.org permissions problem
by Anders Johansson 02 May '11

02 May '11

http://download.opensuse.org/YaST/Repos/openSUSE_114_Servers.xml gives 403 - Permission denied. This means the "add community repository" feature in YaST doesn't work. Could someone take a look? Anders -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

Re: NetworkManager 0.9 in Factory soon-ish (was Re: [opensuse-factory] openSUSE Tumbleweed status for the week of April 9, 2011)
by Frederic Crozat 02 May '11

02 May '11

Le vendredi 29 avril 2011 à 08:37 -0700, Greg KH a écrit : > On Fri, Apr 29, 2011 at 09:48:24AM +0200, Frederic Crozat wrote: > > Le jeudi 28 avril 2011 à 19:14 +0200, Raymond Wooninck a écrit : > > > Hi Frederic, > > > > > > Yes, KNM has not been rewritten yet for NM 0.9 (and I am not sure about the > > > timeline for it either). This is up to Will. > > > > > > For now we are using the patches for KDE that Dan Williams created, which > > > require the f15 patch. > > > > Ok, good to know. > > > > Of course, it would be nice if we could get KDE from 11.4 to work with > > NM 0.9 ;) > > If you are using 11.4, then you would never updgrade NM either. As long > as it all plays well together in Tumbleweed, everyone will be happy. My point was more for people who wanted to test GNOME 3 (which requires NM 0.9) and maybe still have KDE NM support working ;) -- Frederic Crozat <fcrozat(a)novell.com> Novell -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Update to xf86-video-ati-6.14.1 DDX
by Vincent Lejeune 01 May '11

01 May '11

hello, I submitted a request to X11:Xorg (sr:68972) to update xf86-driver-video-ati to 6.14.1. Currently the version of this driver is 6.14.0. However it does not support the gpu on my netbook (the "fusion" cpu/gpu zacate e350). As Catalyst currently don't play well with gnome 3 activity bar, I think that support for this hardware by the open source radeon driver should be available in OpenSUSE:Tumbleweed to avoid owners to manually rebuild this driver ; it is only a minor revision of a component that already ships within openSUSE 11.4. Regards, Vincent -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] xfce4 update now landed in Tumbleweed
by Greg KH 01 May '11

01 May '11

Just a short note saying that I've added the latest xfce4 update to Tumbleweed. It has survived my limited testing, and if anyone has any problems with it, please let me know. Next up, KDE 4.6.2... thanks, greg k-h -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 9