March 2010 - openSUSE Factory - openSUSE Mailing Lists

[opensuse-factory] Cronie as default cron in Factory
by Michal Seben 07 Jun '11

07 Jun '11

Hi all! Next week I will move cronie[1] package to Factory, so it will replace old cron. If someone is against this step, please just write what's wrong. As I announced earlier, you could find Cronie in Base:System repo [2] there is also prepared wiki about known changes after switch to cronie [3] [1]https://fedorahosted.org/cronie/ [2]https://build.opensuse.org/package/show?package=cronie&project=Base%3ASys… [3]http://en.opensuse.org/Cron_replace#Differences_between_old_openSUSE.27s_… -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

12 28

[opensuse-factory] syslog-ng update
by Peter Czanik 11 Dec '10

11 Dec '10

Hello, I prepared updated syslog-ng packages with the close supervision of Marius Tomaschewski, the maintainer of the syslog-ng package. They are available in home:czanik in the openSUSE BS. I would like to see these packages included in Factory, to replace the ancient 2.0 syslog-ng, but MT seems to have disappeared (no response to e-mails in the past two weeks). Questions: - it works fine on my machines, but could anybody else test it? - what is the proper way to get syslog-ng updated in factory, if the maintainer seems to be unavailable? - I have now both 3.0 and 3.1 packages there, called syslog-ng and syslog-ng31. The ultimate goal is to include 3.1. Should I drop the current syslog-ng package and rename syslog-ng31 to syslog-ng? Bye, CzP -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 4

[opensuse-factory] Is the upgrade from 32 bits to 64 bit supported? Question for devs O:-)
by Carlos E. R. 07 Oct '10

07 Oct '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm asking here a question not related to factory directly, because I want to reach the devs. You can reply on opensuse list instead if you prefer. To keep it short (longer post in the opensuse list), I'm attempting to upgrade from 11.0 to 11.2 (32 bits) using the retail DVD, wich turns out it has only the x64 version. It offers to upgrade to 64 bit the 32 bit install: The architecture of the system installed in the selected partition is different from the one of this product" [continue] [cancel] I said "continue", then I checked the package list. As far as I could see, it intended to replace all packages with those corresponding to the 64 bits version. If this works, fine... but I was afraid, and I cancelled. Not because risking data (it is a copy), but because of possible waste of time. I thought I'd better RFC. Has anybody done this, an upgrade from 32 to 64 bits? Does it work? Is it "supported"? - -- Cheers / Saludos, Carlos E. R. (from 11.2 x86_64 "Emerald" GM (Elessar)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAktvNHIACgkQU92UU+smfQVsTwCfSYFG8N7Owo/PWNu0ylYKGqmr fuQAoJQSLDrMlTDMYeRihU5SfBa0fVz8 =zvu9 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

9 22

[opensuse-factory] 11.2 Release Notes
by Karl Eichwalder 25 Jun '10

25 Jun '10

It would be good if we would start with collection release notes snippets for 11.2 now. Do not hesitate to provide input! Here is some background information: http://en.opensuse.org/Release_Notes -- Karl Eichwalder R&D / Documentation SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nuernberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 1

[opensuse-factory] PAM broken?
by Vahis 15 Apr '10

15 Apr '10

I am running latest ML as a VBox guest on an 11.2 host. I can ping in and out. I can ssh in and out, LAN or WAN. I can open LAN Samba shares I can connect in over fish or sftp from LAN and WAN But can't connect out to any hosts over fish or sftp. Host I'm trying to connect over WAN shows: pam_unix2(sshd:auth): conversation failed error: ssh_msg_send: write error: PAM: Authentication failure for 'user' from 'ipaddress' port '33804 ssh2. Host I try to connect in LAN says nothing. I booted the same VBox guest using 11.0 Live KDE CD and everything works from there. What should I look into? Vahis -- http://waxborg.servepics.com -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 3

[opensuse-factory] Netiso MS3: Not all needed modules present in repo.
by Oddball 13 Apr '10

13 Apr '10

Hi, I updated to MS3, using zypper dup, rebooting complained about two missing kernelmodules: result no desktop starting up, no tty. Fixing the issue using the Netiso leaded to ncurses and trying to load the installmodules 3 times. Not possible to install or repair. 'an error occured'.... All went well untill the install should start: ti connecting to the server, downloading the modules. Than few modules missing, and stop. Rescue did work, but i did not know the commands to get it doing what i needed. Luckily i have a still working 11.1 install. Any ideas as how to get the missing modules installed, and getting the system booted? (amd modules and pata are missing, caught in a glimps) Unfortunately i am not able to get to the bootlog from this install, i will try to get the right names of the missing modules. -- Enjoy your time around, Oddball, aka M9. OS: Linux 2.6.27.19-3.2-default x86_64 Huidige gebruiker: oddball@AMD64x2-sfn1 Systeem: openSUSE 11.1 (x86_64) KDE: 4.2.1 (KDE 4.2.1) "release 103" -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 26

[opensuse-factory] new package: crawl
by Sascha Peilicke 07 Apr '10

07 Apr '10

Hello, I'm new to this list and I want to propose the addition of the package 'crawl' to devel:openSUSE:Factory. It contains the Stone Soup version of Dungeon Crawl, a rogue-like game much like Nethack. It isreleased under GPLv2 and is one of the most popular rogue-likes and very actively developed. Still, it hasn't been packaged yet. I was working on the package for quite some time now and I think it's in a good shape to get some reviews on it. The game consists of a terminal-version and a SDL-based tiled version which are split across the packages 'crawl' and 'crawl-sdl'. Currently they are found in the project 'home:saschpe'. -- Kind regards, Sascha Peilicke http://saschpe.wordpress.com

3 5

[opensuse-factory] List of features of openSUSE 11.3
by Shayon Mukherjee 06 Apr '10

06 Apr '10

Hello, I am looking for a list of Features, some 'KEY' features of openSUSE 11.3.Also what special changes have been made compared to 11.2.As i have plans to make a promo for 11.3,so this would be very essential. Here are some of them http://lists.opensuse.org/opensuse-factory/2010-02/msg00066.html , i would like to know the updated data (if any) ... Thanks in advance -- Regards, SJ(Shayon) openSUSE http://en.opensuse.org/User:Wwarlock Twitter: ShayonM -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] Oxygen icons on Apache
by Javier Llorente 05 Apr '10

05 Apr '10

Hello list-mates, As some of you may know, I've been working on making Oxygen icons available on Apache, and I would like to get some feedback. Do you see any unrecognizable icons at http://www.javierllorente.com/tmp/ ? I want to make it easy to enable. Quoting from the README file included in the apache2-icons-oxygen package In order to enable this collection of icons on Apache, you have to add Include /etc/apache2/mod_autoindex-defaults-oxygen.conf (Apache-wide) to /etc/apache2/httpd.conf. Do not forget to comment the line Include /etc/apache2/mod_autoindex-defaults.conf and comment the following as well in /etc/apache2/default-server.conf Alias /icons/ "/usr/share/apache2/icons/" <Directory "/usr/share/apache2/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> (Virtual hosts) to your virtual host configuration file (usually located under /etc/apache2/vhosts.d/). Is there a better way to do it? My idea is to make Apache's directory listing more beautiful. It's already part of the Apache Build Service project and if you like it, I could submit it to Factory. The latest rpm packages are available at http://download.opensuse.org/repositories/home:/javierllorente/ Build Service project: https://build.opensuse.org/package/show?package=apache2-icons- oxygen&project=home:javierllorente I was also thinking about dropping apache2-icons-crystal unless someone likes Crystal icons. Comments and suggestions are welcome! -- Javier Llorente

4 7

[opensuse-factory] gtkterm?
by Sid Boyce 31 Mar '10

31 Mar '10

Was this packaged dropped from openSUSE or wasn't there to begin with? I have come across a number guys, mainly newbies, who have got into a rut trying to use minicom, I pointed them to gtkterm which is a GUI with a simple menu that eliminates the confusion. Regards Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] nouveau ABI major version change
by Brian Millett 31 Mar '10

31 Mar '10

I'm using the opensuse 11.3 milestone 4 and have been using the nouveau driver. After the latest zypper update, I now get the following nouveau error (II) LoadModule: "nouveau" (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so (II) Module nouveau: vendor="X.Org Foundation" compiled for 1.7.99.902, module version = 0.0.15 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 7.0 (EE) module ABI major version (7) doesn't match the server's version (6) (II) UnloadModule: "nouveau" (II) Unloading /usr/lib64/xorg/modules/drivers/nouveau_drv.so (EE) Failed to load module "nouveau" (module requirement mismatch, 0) (EE) No drivers available. Any work around? Thanks. -- Brian Millett - [ Businessman and Lyta Alexander, "The Gathering"] "Someday I'm going to find the guy that thought up the idea of renting telepaths to businessman and I'm going to kill him." 'Funny, I just knew you were going to say that.'

2 1

Re: [opensuse-factory] Firefox persona for openSUSE
by Atri Bhattacharya 31 Mar '10

31 Mar '10

Forwarding original message and response. On Tue, 2010-03-30 at 15:56 +0200, Jakub Rusinek wrote: > > I think it would be nice to give users the most native appearance under > both KDE and GNOME they can get... Using Personas by default would only > confuse them. > The basic user interface would still remain as integrated with the desktop as it is now, I was not talking of a garish theme that makes firefox look like a rain forest, but a subtle one that makes it look more attractive. I also do not see how something like a theme could confuse users in any way. -- Atri -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Firefox persona for openSUSE
by Atri Bhattacharya 30 Mar '10

30 Mar '10

Hi! Since v 3.6 Firefox supports light themes called personas. I think it will be nice to have a default opensuse-themed persona on Firefox by default for 11.3. -- Atri -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] kde4.4 and compiz
by dale ritchey 30 Mar '10

30 Mar '10

After sundays factory update compositing with kde's desktop effects really doesn't work but compiz woks quite well. Which hasn't really worked with kde until sundays update. Is this planned or should I file a bug report? -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] should Office pattern NOT install openoffice?
by Andrea Florio 30 Mar '10

30 Mar '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi people, as you know, i'm working on LXDE into 11.3 i noticed a strange thing with Office pattern. if you install office pattern, it will install OO.o this is imho wrong... in particular for xfce and lxde, that may want to use a lighter solution (check lxde-office pattern). i think, that Office pattern sould install "nothing" and call as "dependencie" $DE_office pattern something like "imaging" pattern.. what do you think about it? - -- - ------------------------------------------ Andrea Florio QSI International School of Brindisi Sys Admin CISCO CCNA Certified openSUSE-Education Administrator openSUSE Official Member (anubisg1) Email: andrea(a)opensuse.org Packman Packaging Team Email: andrea(a)links2linux.de Web: http://packman.links2linux.org/ Cell: +39-328-7365667 - ------------------------------------------ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAkuvgBcACgkQyCZT87TFPuiZoQCgh4WBimf0GUhqAfgOSrB84FU3 bSgAnRcOPeoq34uUH8qECxblf8pdvzKC =Wmcf -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

7 8

[opensuse-factory] Milestone 4 Announcement Review
by Andreas Jaeger 30 Mar '10

30 Mar '10

I'd like to see Milestone 4 announced tomorrow and have drafted the following announcement. Please review it and send me suggestions on improving the text. If you want to rewrite it completely, I'm fine as well ;) I'd like to see from packagers a few more details on the major packaging changes, enhancements are welcome. Thanks, Andreas [Graphic: Geeko at work from MIlestone3] The fourth of seven scheduled milestone releases for 11.3 was completed and released on schedule. Milestone 4 focuses on switching to upstart as init daemon. Here's what you may find interesting in the new release: * OpenOffice.Org has been updated to 3.2.1 Beta1 * NetworkManager was updated to version 0.8 * cups has been updated to version 1.4.2 * The conntrack - network filtering system has been added * The mono stack has been updated to version 2.6.3 * Python was updated to version 2.6.5 RC 2 * samba was updated to version 3.5.1 * The Moblin team has started with the integration of the Moblin UI into the distribution and plan to have everything ready for the next milestone Gnome/GTK desktop users: * GNOME has been updated to the GNOME 2.30 release candidate (2.39.92) KDE desktop users: * KDE has been updated to version 4.4.1. * Amarok is now at version 2.3. * k3b is updated to version 1.91. Testing! Testing! Testing! As this is a milestone release, 11.3 milestone 4 does contain bugs that we know about, but should not stand between courageous contributors and release testing. You can track the most annoying bugs on the wiki along with 11.3 development. If you want to make sure 11.3 final is free of annoying bugs, we’ll need your help finding, reporting, and fixing those hidden bugs. To learn more about testing openSUSE, visit the Testing pages on the openSUSE wiki. To follow the testing and development process, we suggest that you subscribe to the openSUSE-Factory mailing list (Subscribe | Help | Archives) and join the #openSUSE-Factory channel on Freenode to discuss openSUSE development. The next openSUSE Milestone is scheduled to be released on Thursday, March the 25th, with additional new features and bug fixes. Get Milestone 4 Today! What are you waiting for? Grab the milestone release from software.opensuse.org/developer today! -- Andreas Jaeger, Program Manager openSUSE, aj(a){novell.com,opensuse.org} Twitter: jaegerandi | Identica: jaegerandi SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126

4 7

[opensuse-factory] Request to move lilypond from contrib to factory?
by Dave Plater 29 Mar '10

29 Mar '10

Hi, I asked how to go about moving lilypond to factory on the packaging list and it was suggested that I ask on this list as well as a submit request. I've made submit request id 35916 already and here are my reasons :- I maintain contrib lilypond and multimedia:apps rosegarden4,rosegarden4 should "Require: lilypond" but because lilypond resides in contrib I can only recommend it in rosegarden because a new user might not have the contrib repo enabled. Lilypond used to be part of the main distribution and I belive it was moved to contrib due to lack of maintainer. I'm also not sure which devel project it should go to, it's a musical notation printing program, so I have submitted it from contrib. See also http://bugzilla.novell.com/show_bug.cgi?id=546120#c6 Thanks Dave P -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] Kernel Mode Setting (KMS) for openSUSE.
by Egbert Eich 29 Mar '10

29 Mar '10

Folks - In yesterday's discussion about the future of SaX2 it has been requested that changes that will affect users in the future are communicated to the openSUSE community early. KMS (kernel mode setting) integration would be such a feature, thus I would like to announce this here and one step further dive into a technical discussion about a possible solution. Furthermore test packages are available to try things out on Factory. I would like to encourage people interested in development and technical discussions in general to participate in the discussion and the development efforts. Kernel Modesetting (KMS) ======================== All of you who are using a graphical desktop on Linux have been using the X Window Sytem. The X Window System Server (XServer) is the instance which receives requests from your desktop applications to draw all the widgets (windows, buttons, images etc.) you see on your desktop. It also processes input from your keyboard and mouse and sends them to applications as events. Traditionally on Linux the XServer does not only draw images to the screen (ie writes them to some sort of frame buffer) but it is in charge of initializing, setting up and driving the graphics hardware. This paradigm which has been true since the X Window System has been ported to Linux is about to change: Much of the initialization, set up (video mode setting) and control of the graphics hardware is about to move to the Linux kernel. There are a number of advantages to this: - A central instance is in charge of the graphics hardware, other user mode applications (not just the Xserver) can take advantage of mode setting. - The Xserver will no longer require full root privileges as it doesn't talk to the hardware directly any more. - Faster boot process: The Xserver doesn't need to (re)initialize the graphics hardware any more, this is all done by the kernel very early in the boot cycle. - Smoother (flicker free) boot experience: The screen doesn't flicker and changes resolution any more when the Xserver starts. - One central entity is in charge and manages the resources of the graphics hardware - like the video memory which makes sharing of these resources between several applications (like Xserver and several DRI (Direct Rendering 3D) applications much easier. KMS is integrated in the DRM drivers. In the near future most graphics driver will switch to KMS: - Intel already ships a fully working KMS driver. Future Intel chipsets will be supported by the KMS driver only. - KMS in the Radeon DRM driver is still work in progress but it is already working well on some chipsets. - Noveau is relying heavily on KMS for their free 3D driver for NVIDIA chipsets. The proprietary ATI and NVIDIA drivers are unlikely to switch to KMS in the near future. Integration in openSUSE ======================= Now this begs the question what we have to do to integrate it into openSUSE. Originall I had plans to look into this for openSUSE 11.2 already - but then I got side tracked by other stuff it fell on the floor and noone else beat me to it either ... oh well. Now I had the chance to play around with KMS a little and came up with some ideas and a proof of concept. It turned out that the changes to openSUSE needed to fully support KMS are quite small. Key is to load the KMS aware DRM driver as early as possible in the boot process to avoid video mode changes later in the boot cycle - preferrably in the initrd. The Boot Process ---------------- On openSUSE the boot loader is configured for two boot scenarios: default and failsafe. The user can select the failsafe boot scenario in case the default scenario does not work for him. In the failsafe scenario certain features are deactivated which have shown to cause problems on some systems. Since KMS is a new feature it is a candidate for deactivation during a failsafe boot. Instead the system should then boot into the VESA framebuffer mode. Should this also fail the kernel will automatically fall back to a VGA text mode. To disable KMS on boot a new boot parameter is introduced: 'nomodeset'. This parameter is to the boot command line for the failsafe mode. The user may add this parameter by hand for any other boot mode. The kernel command line is parsed in initrd and an appropriate entry is created in /etc/modprobe.d/options. Furthermore the graphics driver module and - if required - the agp module(s) are added in the correct order (agp modules first) to the list of modules to be loaded initially. Changes to individual packages ============================== 1. yast2-bootloader & perl-Bootloader ------------------------------------- The boot parameter 'nomodeset' is added to the failsafe boot paramter lists in each of the modules. (I have not been able to find out which module provides the entry relevant for which situation, therefore I've whacked both.) yast2-bootloader updates the variable FAILSAFE_APPEND in /etc/sysconfig/bootloader appropriately. 2. kernel-source ---------------- To use KMS for a certain DRM driver the kernel config option CONFIG_DRM_<driver_name>_KMS needs to be set to 'y'. At the moment we will support KMS only for Intel hardware, thus only the variable CONFIG_DRM_I915_KMS needs to be changed. In the sample build this has been enabled for the -default, -desktop, -pae, -debug, -trace and -vanilla kernels for the i386 and x86_64 platforms. The kernel boot splash has already been fixed for KMS for openSUSE 11.2. 3. mkinitrd ----------- This package writes the initrd file. To add KMS support to the initrd mkinitrd needs to perform the following tasks: 1. Check the sysconfig variable NO_KMS_IN_INITRD, if set, don't attempt to install a KMS DRM capable driver. 2. Obtain a list of PCI devices installed on the system. 3. a. In the list of PCI devices identify those devices which are of class VGA and look for a matching driver. b. Before a driver is matched check the PCI vendor, device, subvendor and subdevice ids against a blacklist in /etc/kms/blacklist should this file exist. This file contains one vendor, device, subvendor and subdevice id per line, '*' serves as a wildchar, trailing wildchars may be ommitted, '#' at the beginning of a line serves as a comment. c. Use the standard modprobe alias mechanism to find a matching DRM driver module. This way standard blacklistings of kernel modules will be honored and update modules will be searched if they are available. KMS capable DRM drivers provide an alias list (in contrast to non-KMS capable DRM drivers which are to be loaded explicitely by the Xserver). d. If a driver is found check for a black listing in /etc/kms/<driver_name>.blacklist. The same rules as in 3 b. apply. 4. If a KMS capable DRM driver is found search for an agp driver: a. Obtain a list of all known agp drivers for the specific kernel and collect their alias lists. b. Match all installed PCI devices against the alias lists of each agp driver. If a match is found add the driver to the lists of modules to be loaded. Make sure that this driver is loaded prior the the DRM driver. Two scripts setup-kms.sh and boot-kms.sh are added to mkinitrd. The former performs the tasks listed above, the latter provides the required module dependencies in the required order, parses the boot command line for the 'nomodeset' option and adds the apropriate entry to /etc/modprobe.d/options. The linuxrc script is extended to search the boot command line for <drivername>.<option>=* strings for each driver loaded in initrd and add the <option>=* part to /etc/modprobe.d/options. 4. udev ------- Udev loads any modules which are not loaded by linuxrc scripts directly. It is possible to let udev load the required DRM and AGP modules provided it is made sure that this happens in the correct order. Since there is no explicit dependency of DRM modules to AGP drivers as there is no general one to one match between the two drivers a udev rule must exist to enforce the correct order for all cases where a AGP module is required. This is true for Intel DRM drivers and any other driver for an AGP graphics chip. For this a rule file 79-waitfor-agp.rules is added which is run before 80-drivers.rules. It checks if either an Intel graphics (class VGA) device is processed or if the graphics device is an AGP device. The latter condition is tested by an auxiliary tool (is_agp) which is passed the kernel name of the event device. If either condition is true udev will wait for /dev/agpgart to appear before proceeding to load a DRM driver module. 'is_agp' checks the capabilities flags in the PCI config space of this device for AGP. The changes to udev are not strictly required to make KMS work, still they augment the default module load process Installation ============ Modified packages for Factory of - kernel-source, - mkinitrd, - yast2-bootloader, - perl-Bootloader, - mkinitrd - udev can be found in my build service home on OBS under home:eeich:Factory-KMS. For installation add http://download.opensuse.org/repositories/home://eeich://Factory-KMS/openSU… to your installation repository and update the packages in question (going thru the usual vendor change hassle). It is advisable to update mkinitrd before updating the kernel. Then when the kernel is installed the modified mkinitrd will be used and all steps required to install KMS will be performed. TODO ==== - The kernel bootsplash sometimes produces wrong colors (WIP). Add KMS - Add KMS support to the RadeonHD driver. Cheers, Egbert. -- Egbert Eich (Res. & Dev.) SUSE LINUX Products GmbH X Window System Development Tel: +49 911-740 53 0 http://www.suse.de ----------------------------------------------------------------- SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

18 68

[opensuse-factory] Moving lilypond to multimedia:apps with the intention to submit it to factory.
by Dave Plater 29 Mar '10

29 Mar '10

Hi, I'm planning to move lilypond from openSUSE:Factory:Contrib to multimedia:apps and to submit it to factory, to enable multimedia:apps and factory rosegarden4 to require it. I'm making this announcement because I've maintainer rights in multimedia:apps and don't want to unwittingly abuse my privilege. I will wait until Wednesday before doing this and when it's accepted into factory will disable the factory build in contrib and delete the binaries leaving only 11.2 and 11.1 available. Any comments welcome. Regards Dave P -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] openSUSE 11.3 Support for Intel Core i3 / i7
by Andi Sugandi 28 Mar '10

28 Mar '10

Hi Listmates, I tried installing openSUSE (oS) 11.2 and 11.3 M3 on Dell Inspiron 1440 and Acer Aspire 4740, and the results seem similar: 1. oS 11.2: Live KDE: It failed to boot. Installation: Succeeded to run YaST-Installer, but after reboot it failed to finish the installation processes. 2. 11.3 M3: Live CD KDE4: It booted well. but hang when it was in progress on YaST Installer (when formatting new partitions) Installation: I can see it booted well but no GUI ran, only blank screen, I could not reach 'Ctrl+Alt+Fn). Will Intel i3 / i7 processors be supported by oS 11.3 in time the 11.3 reach the final release? Thanks in advance. Best regards, -- Andi Sugandi (Bandung) openSUSE Ambassador http://en.opensuse.org/User:Andisugandi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] Re: [opensuse-packaging] Newly prepared virtualbox-ose in Virtualization repo
by Michal Šebeň 27 Mar '10

27 Mar '10

Am Fri 26 Mar 2010 10:45:57 PM CET schrieb P Linnell <mrdocs(a)opensuse.org>: > Hi, > > On Friday 26 March 2010 13:36:04 Michal Seben wrote: >> Hi all ! >> >> Because of bnc#567435 (duplicated symbols in vbox kernel modules) we have >> to split kernel packages for virtualbox-ose. Well and this is already done >> (in Virtualization repo >> https://build.opensuse.org/package/show?package=virtualbox- >> ose&project=Virtualization), but we also decide to clean up a spec file a >> little. This is also already done, but package needs testing. >> We also decide to move virtualbox-ose to Virtualization repo where it >> belongs. Just a notice : backported will be only last stable product (11.2 >> today) >> > Just curious, any reason this cannot be enabled for 11.1 also ? no technical constraint and you are the second one, who wants to enable build of vbox for 11.1 so we will add "#if lines" to spec file to fix openSUSE 11.1 build I dropped 11.1 because sometimes porting to older products eats too much time (and really mess up the spec file), but 11.1 looks ok bye! Michal -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] postgress
by Donn Washburn 27 Mar '10

27 Mar '10

Hey SuSE; Ref: /etc/init.d/postgresql and /etc/sysconfig/postgreql. Have the directories wrong, which cause "postgresql start" to fail. openSuSE uses pgsql and not postgresql -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] OpenOffice and pps files
by Donn Washburn 26 Mar '10

26 Mar '10

OpenOffice on Milestone 3 fails to correctly open a power point file. Over and over it tries to recover a save from an email pps file or off the HD. First it is setting the permission so it can not write the file. Corrected with chmod and it will write the file. Then calling up OpenOffice3 Presenter, it fails to have completed the recovery and just tries again. Over and over impress-3.2.0.99.1-1.1.i586 impress-extensions-3.2.0.99.1-1.1.i586 run from an xterm: The error appears to be a java problem # cd /usr/lib/ooo3/program> # run simpress # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0xb7614632, pid=12596, tid=3031321296 # # JRE version: 6.0_17-b17 # Java VM: OpenJDK Client VM (14.0-b16 mixed mode linux-x86 ) # Derivative: IcedTea6 1.7 # Distribution: Custom build (Sat Mar 20 22:31:32 UTC 2010) # Problematic frame: # C [libstdc++.so.6+0x5e632] _ZSt18_Rb_tree_incrementPSt18_Rb_tree_node_base+0x12 # # An error report file with more information is saved as: # /tmp/hs_err_pid12596.log # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # http://icedtea.classpath.org/bugzilla # [error occurred during error reporting , id 0xb] -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316

3 3

[opensuse-factory] Newly prepared virtualbox-ose in Virtualization repo
by Michal Seben 26 Mar '10

26 Mar '10

Hi all ! Because of bnc#567435 (duplicated symbols in vbox kernel modules) we have to split kernel packages for virtualbox-ose. Well and this is already done (in Virtualization repo https://build.opensuse.org/package/show?package=virtualbox- ose&project=Virtualization), but we also decide to clean up a spec file a little. This is also already done, but package needs testing. We also decide to move virtualbox-ose to Virtualization repo where it belongs. Just a notice : backported will be only last stable product (11.2 today) I will switch devel directory from Virtualization:VirtualBox to Virtualization next week + and I will try to push all changes to Factory. (I want to hit Milestone 5) Suggestions how to improve virtualbox-ose.spec in Virtualization repo are welcome. Preferred way is through the submitrequest :) bye! -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] [ANNOUNCE] Will update PackageKit to 0.6.1 in Factory next week
by Vincent Untz 25 Mar '10

25 Mar '10

Hi, Looking at the git log from PackageKit, it looks like Scott managed to fix the build of the zypp backend -- which was the reason we were stuck with an old PackageKit (0.5.1). So we'll put the next release of PackageKit in Factory (0.6.1, due next week, I think). Note that this changes the API (at least deprecated API were removed) and therefore will possibly break tools using PackageKit that were not prepared for this. You can take a look at the NEWS file for more details: http://cgit.freedesktop.org/packagekit/tree/NEWS As far as I know, there are two major consumers of PackageKit: gnome-packagekit (which should be fine) and the KDE update applet (no idea what the status is here). Is it an option to not update PackageKit? Not really: the version we have is old, not really maintained, and my guess is that we'll soon have tools that will require the new stuff there. Thanks, Vincent -- Les gens heureux ne sont pas pressés. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] grub1 gfxmenu resolution configuration
by Felix Miata 25 Mar '10

25 Mar '10

I don't see anywhere in /etc/sysconfig (e.g. boot, bootloader, bootsplash) to control the resolution in /boot/message pointed to by gfxmenu in /boot/grub/menu.lst. On my Intel systems the Grub resolution is much lower than with nv, radeon or mga. I'd like them all to be the higher used by the non-intels. How does one configure that? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 5

[opensuse-factory] open source firmware for broadcom wifi cards - openFATE#306619
by Mariusz Fik 25 Mar '10

25 Mar '10

Hi, I made some feature request about include opensource firmware[1] for broadcom wifi cards into default installation media. https://features.opensuse.org/306619 I made a package with this firmware in my home repo[2]. It has been build for oS 11.2 and Factory and resides in noarch. After installing this package, firmware is located in '/lib/firmware/b43- open'. b43 tries to load firmware first from '/lib/firmware/b43', if there is no firmware tries load from '/lib/firmware/b43-open'. Here is a dmesg output: [ 1298.420958] b43-phy2: Broadcom 4318 WLAN found (core revision 9) [ 1298.529980] phy2: Selected rate control algorithm 'minstrel' [ 1298.556896] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ] [ 1303.347086] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 1303.360600] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw [ 1303.386197] b43 ssb0:0: firmware: requesting b43-open/pcm5.fw [ 1303.406365] b43 ssb0:0: firmware: requesting b43-open/b0g0initvals5.fw [ 1303.430840] b43 ssb0:0: firmware: requesting b43-open/b0g0bsinitvals5.fw [ 1303.533063] b43-phy2: Loading OpenSource firmware version 410.31754 [ 1303.533085] b43-phy2: Hardware crypto acceleration not supported by firmware [ 1303.533094] b43-phy2: QoS not supported by firmware [ 1303.606220] Registered led device: b43-phy2::tx [ 1303.628692] Registered led device: b43-phy2::rx [ 1303.630645] Registered led device: b43-phy2::radio [ 1303.654720] ADDRCONF(NETDEV_UP): wlan0: link is not ready Then if we want install proprietary firmware, we execute 'install_bcm43xx_firmware', which install firmware into '/lib/firmware/b43'. Then dmesg output looks like this one: [ 116.655170] b43-phy1: Broadcom 4318 WLAN found (core revision 9) [ 116.771684] phy1: Selected rate control algorithm 'minstrel' [ 116.829284] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ] [ 121.359077] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 121.376799] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 121.394859] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 121.412569] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 121.548055] b43-phy1: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 121.610461] Registered led device: b43-phy1::tx [ 121.637110] Registered led device: b43-phy1::rx [ 121.639184] Registered led device: b43-phy1::radio [ 121.663270] ADDRCONF(NETDEV_UP): wlan0: link is not ready So it is not in conflict with our existing solution. Which devel project should I choose for this firmware? [1] - http://www.ing.unibs.it/openfwwf/ [2] - http://download.opensuse.org/repositories/home:/Fisiu/ -- Pozdrawiam / Best regards, Mariusz Fik, openSUSE Community Member

3 7

[opensuse-factory] 11.3-M4 KDE4 live CD: print-to-pdf using okular vs. gwenview (and others)
by madworm_de.novell＠spitzenpfeil.org 25 Mar '10

25 Mar '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I use okular to display a scanned document in TIF format (LZW compressed). It displays fine. Using print-to-pdf creates a pdf file with ultra-low-res content, basically useless for printing it again. Using gwenview to view and print-to-pdf creates a file that properly reproduces the content of the tif image. The printing options in both programs are absolutely identical, but the result differs significantly. It is not obvious to me why this is the case. BTW, that problem also exists in 11.2 Later, Robert -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAkurkNMACgkQxSQAU9UA5juwywCfV4xM6UTFxQ4rwfzyVeio47jR ynYAnRA0oZi+G04wdirTRYAQYfj/kQus =rS+3 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] openSUSE 11.3 Milestone 4 Release
by Andreas Jaeger 25 Mar '10

25 Mar '10

The fourth of seven scheduled milestone releases for 11.3 was completed and released on schedule. Milestone 4 focuses on switching to upstart as init daemon. Here's what you may find interesting in the new release: * OpenOffice.Org has been updated to 3.2.1 Beta1 with new features * NetworkManager has been updated to version 0.8 with fixes to better support bluetooth and GSM. * cups has been updated to version 1.4.2, it "adds over 67 changes and new features to CUPS 1.3.11, including improved Bonjour/DNS-SD support, supply level and status reporting for network printers via SNMP, an improved web interface, and the CUPS DDK tools." * The conntrack - network filtering system has been added. These are userspace tools that allow system administrators interact with the Connection Tracking System, which is the module that provides stateful packet inspection for iptables. * The Mono stack has been updated to the bug fix release 2.6.3 together with MonoDevelop 2.2.2. * Python has been updated to the bug fix release 2.6.5 RC 2 * samba was updated to version 3.5.1 * The Moblin team has started with the integration of the Moblin UI into the distribution and plan to have everything ready for the next milestone. * The LiveCDs have virtualbox guest tools. Now features like screen resizing, seamless mode, and shared clipboards work fine and automatically after boot-up! Check this (~8,5MB) ogv video to see the guest addition features in action. Gnome/GTK desktop users: * GNOME has been updated to the GNOME 2.30 release candidate (2.29.92). * With the next milestone, empathy will be the default IM client for GNOME. Empathy supports now sending files via drag & drop and the IRC module now includes support for common IRC commands such as /join. * Tomboy's startup time has been drastically improved. Syncing is now done automatically. * Natilus' user interface now includes a new split view mode and the default is set to browser mode. Nautilus features a number of user interface changes including a new split view mode and is now set to browser mode by default, replacing spatial mode. KDE desktop users: * KDE has been updated to version 4.4.1 the most important changes: * A performance problem in KMail when sending emails has been fixed * Various fixes in Plasma widgets and other addons, such as the analog clock and the picture frame * A number of fixes in Konsole, KDE's powerful terminal application * Amarok is now at version 2.3, "Areas such as podcast support and saved playlists have seen huge improvements, as has the support for USB mass storage devices (including generic MP3 players)". * k3b is updated to 2.0 RC2 LXDE desktop users: * Switch to pcmanfm 0.9.3 and libfm 0.1.9. Now lxde fully supports trash, automount, gvfs, "menu-browsing" and much more. * lxsession: upgrade to 0.4.3 with d-bus support As this is a milestone release, 11.3 milestone 4 does contain bugs that we know about, but should not stand between courageous contributors and release testing. The known bugs include: * gwibber has been updated but depends on desktopcouch and that stack is not yet integrated into openSUSE. You can track the most annoying bugs on the wiki along with 11.3 development. If you want to make sure 11.3 final is free of annoying bugs, we’ll need your help finding, reporting, and fixing those hidden bugs. To learn more about testing openSUSE, visit the Testing pages on the openSUSE wiki. To follow the testing and development process, we suggest that you subscribe to the openSUSE-Factory mailing list and join the #openSUSE-Factory channel on Freenode to discuss openSUSE development. The next openSUSE Milestone is scheduled to be released on Friday, April the 9th, with additional new features and bug fixes. Get Milestone 4 Today! What are you waiting for? Grab the milestone release from http://software.opensuse.org/developer today! Andreas -- Andreas Jaeger, Program Manager openSUSE, aj(a){novell.com,opensuse.org} Twitter: jaegerandi | Identica: jaegerandi SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126

2 2

[opensuse-factory] GDM red X icon
by s2_johnm 25 Mar '10

25 Mar '10

11.3 milestone 4... Since milestone 1 I've noticed a red X icon displayed on the GDM login prompt. Not sure what this should be, but I think the proper icon is missing. -johnm -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] k3b as root or user fails
by Donn Washburn 25 Mar '10

25 Mar '10

11.1 Milestone 1 Hey Group; How come k3b as a user fails to have access to the CD/DVD Then as root. (from a konsole execution) the error is <unknown program name>(4445)/: KUniqueApplication: Cannot find the D-Bus session server: "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." <unknown program name>(4444)/: KUniqueApplication: Pipe closed unexpectedly. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 3

[opensuse-factory] MS3/Factory bugs
by Bernhard M. Wiedemann 25 Mar '10

25 Mar '10

Hello, as member of the testing core team I am testing 11.3-MS3 and later on my eeepc900 netbook, KVM and VirtualBox VMs. And there are some things that might need looking at. a) the Ctrl+Alt+Backspace to kill X11 does not work anywhere/anyhow for me and Jaroslaw Zachwieja. While the issue is minor, I was somewhat disappointed on the response by Stefan Dirsch (repeatedly closing as WORKSFORME without documenting how to get it working). https://bugzilla.novell.com/show_bug.cgi?id=576481 b) on openSUSE-KDE-LiveCD-i686-Build0516-Media.iso openOffice.org crashes when editing a text and doing Insert/Indexes+tables/Indexes+tables nearly the same backtrace is produced on a crash on Insert/Frame + resize-frame http://www3.zq1.de/bernhard/linux/ooffice-crash-backtrace unluckily, I could not get the debug rpms installed using the zypper lines proposed by gdb and the official Debug repo. c) the netbook does not suspend on lid-close, even though acpid is running. From some more testing I found that it can be helped with some tweaking in /etc/acpi/ . Hints in http://students.washington.edu/f/stuff/suspend.shtml Is there already some yast-way to do this configuration? d) with MS3 on my netbook, X11 keyboard layout was always US and could not be changed with yast2 keyboard or yast2 language or KDE-controlcenter. only xorg.conf with AutoAddDevices off helped. e) in that course of action I noticed that the (officially deprecated) SaX2 is no more working so creating a xorg.conf is now a lot more difficult. While I heard people saying that "SaX2 should no more be needed", there are still plenty cases for plenty people when a working xorg.conf is still needed. Installing a /etc/X11/xorg.conf.template could already help there. f) I noticed that installer does not allow me to have root fs crypted. Didn't this work in earlier times? I now got Build0516-KDE-LiveCD booting fine on VirtualBox-3.1.4 (with software-virt) where Build0500 crashed from bugs in vbox drivers. Good job there. http://bugzilla.novell.com/attachment.cgi?id=350338 might still remain, though -- Bernhard M. Wiedemann software engineer -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 5

[opensuse-factory] Re: syslog-ng update
by Peter Czanik 25 Mar '10

25 Mar '10

1 0

[opensuse-factory] kernel from kernel.org
by Donn Washburn 25 Mar '10

25 Mar '10

What has openSuSE done which causes a kernel.org stable kernel not to work? It seems all of them lock up on the vga=. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Re: syslog-ng update
by Peter Czanik 24 Mar '10

24 Mar '10

Hello, 2010-03-24 13:29 keltezéssel, Marius Tomaschewski írta: > Just branch the package using e.g. > osc bco Base:System syslog-ng > > apply your changes to the checked out copy, review, commit and when > you're ready, create a submit request. See "osc submitreq --help" > and ".... --diff". > For some reason local build does not seem to work now, so this is something for tomorrow... > Same with the apparmor profile. > That is already done. >> - I have now both 3.0 and 3.1 packages there, called syslog-ng and >> syslog-ng31. The ultimate goal is to include 3.1. Should I drop the >> current syslog-ng package and rename syslog-ng31 to syslog-ng? >> > When the 3.1 is released you can also update directly to 3.1... > It was released a few days ago, and runs perfectly on my machines. I compiled it now with SSL and database support disabled and all libs except glib dynamically. Bye, CzP -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] new package: upstart
by Stephan Kulow 24 Mar '10

24 Mar '10

Hi, I submitted a new package to openSUSE:Factory: upstart. Mainly because of https://features.opensuse.org/305690 - the biggest gain of having it is clearly that everyone else has it, it doesn't get openSUSE a win right away. But not having it, may become a disadventage shortly - who knows. For now we will support sysvinit and upstart as alternatives, but my preference would be not for long. The package I submitted is pretty much only a start and adopting our scripts to upstart will be less of a pain if we do not have to support alternatives. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

9 27

[opensuse-factory] Status: Distribution
by Stephan Kulow 24 Mar '10

24 Mar '10

Hi, After complete lack of feedback for upstart, I decided to give it a try for Milestone 4 - so the top 6 feature is done ;) Milestone 4 is almost done and I didn't have a problem with my testing so far, so if everything goes right all it takes is an announcement. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

12 25

[opensuse-factory] Factory update to kernel 2.6.34-rc2 coming
by Jeff Mahoney 22 Mar '10

22 Mar '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all - 2.6.34-rc2 was tagged over the weekend so I completed the integration with the master branch. KOTD and Kernel:HEAD kernels will be building shortly and once I've gotten a successful round of builds I'll submit to Factory. Since it's an -rc2 release there will probably be some hiccups, and we'd love to get feedback on them. If you run into an issue it would be awesome if you could also confirm whether the issue is in the -vanilla kernel so we know whether to file upstream bugs or not. Thanks and happy testing! - -Jeff - -- Jeff Mahoney SUSE Labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAkunn8IACgkQLPWxlyuTD7J1pgCcCbp/SaGGFJygNfd+f5C+sEI1 UkQAn3heWkXC7KNUG+ib1Lfl/gRSZ3z+ =hf4s -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 5

[opensuse-factory] Removal of SaX2
by Jon Cosby 18 Mar '10

18 Mar '10

I see where SaX2 has been removed from M3/GNOME. As this has been the standard way to resolve video card issues, what will be taking its place? Is there a better way to go about this? Jon -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 7

[opensuse-factory] synaptiks on openSUSE 11.3
by Andi Sugandi 17 Mar '10

17 Mar '10

Hi Listmates, I could not tap the touchpad of Acer Aspire 5620 on openSUSE 11.3 Mx (it works on openSUSE 11.2 though), but worked nice with synaptiks installed (from KKFD repository). Will the package be included in the 11.3 public release? Best regards, -- Andi Sugandi (Bandung) openSUSE Ambassador http://en.opensuse.org/User:Andisugandi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] (When) will nouveau be part of openSuSE 11.3?
by Joop Boonen 14 Mar '10

14 Mar '10

All, I'm wondering if nouveau will be a part of openSuSE? If yes, when? Currently openSuSE 11.3 M2 doesn't work properly out of the box on my notebook with a NVidia GPU. As openSuSE 11.3 M2 uses kernel 2.6.33 it potentially supports nouveau. http://www.phoronix.com/scan.php?page=news_item&px=Nzc5NQ Regards, Joop. -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 5

[opensuse-factory] Ati driver will not install
by Giel Peters 14 Mar '10

14 Mar '10

hi, After installing 11.3M3 I tried to install X11-video-fglrxG01 from the ATI Repository, on selecting the package I get the warning: "nothing provides ksym(desktop:per_cpu_this_cpu_0ff) = 797b32d1 needed bij ati-fglrxG01-kmp-desktop-8.593_2.6.31.5_0.1-21.1.x86_64" looking for ksym I don't find such a package, what am I missing? regards, Giel Peters -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] KDE desktop font size
by Felix Miata 12 Mar '10

12 Mar '10

For years openSUSE has been distinguishable from other major distros in friendlier larger default fonts. Until recently while others have been using 8pt or 9pt as the base, oS was using 10pt. As of 11.3M3 at least it has been dropped to 9. Why? -- "Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other." John Adams, 2nd US President Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

4 4

[opensuse-factory] KDE4 not shutting down
by Donn Washburn 12 Mar '10

12 Mar '10

Hey Group; @ things I have been seeing is 1. KDE4 not exiting properly. it just hangs after bring up the Logout button and pushing it with the mouse. The only way to kill it is either pull the plug (not good) or from a console tty# ps ax then kill -9 #### 2. When going to any other <CTRL><ALT><F1-5> it seems KDE or X left in <CTRL>F7 will just crash with nothing but the normal screen running. When this happens I get a full screen of KDE related error. Like missing kvmsever. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] Upstream version of Konqueror 'Introduction Page' on openSUSE 11.3 Mx
by Andi Sugandi 11 Mar '10

11 Mar '10

Hello, KDE 4 Live (openSUSE 11.2)[0] has the upstream background image[1] on Konqueror 'Introduction Page' while openSUSE 11.3 Milestones (KDE 4.4) has its (temporary?) branding[2]. Which package i should install to have the upstream version on Konqueror 'Introduction Page' in openSUSE 11.3 Milestones? Thanks in advance. [0] http://home.kde.org/~kdelive [1] http://picasaweb.google.com/andisugandi/OpenSUSE#5447237271572246418 [2] http://picasaweb.google.com/andisugandi/OpenSUSE#5447237271771262802 Best regards, -- Andi Sugandi (Bandung) openSUSE Ambassador http://en.opensuse.org/User:Andisugandi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] KDE 4 and openSuSE
by Donn Washburn 10 Mar '10

10 Mar '10

Hey Group; I have a NVidia card which may be causing a problem in 11.3 with KDE4 crashing. However, I can not tell because no kernel will compile an be installed and work using openSUSE's 2.6.33-5 kernel and cloneconfig or /proc/config.gz. NV.run file complains about the correct naming and will not compile to check. This all has been brought up due to the stock 11.3 NV module may keep crashing or maybe it is KDE4. If I start up X and KDE4 comes up then bring up some program like tvtime, vlc or amarok. Great audio comes up. Then use <Alt><CTRL><F1> and start on something in a console. No telling when but KDE or X will just crash in time (less than 30 minutes). What has caused VGA= not to work with a kernel /proc/config.gz or cloneconfig? I am not just a X end user. I see in /proc/config.gz the mention of selinux and in cloneconfig apparmor for the same variable. You would think that a openSuSE modified kernel 2.6.33 would compile and work when installed using cloneconfig but it doesn't. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Factory (as a guest) doesn't play with Virtual Machine hosts.....
by Scott Beamer 09 Mar '10

09 Mar '10

Over the past 18-24 months, every milestone releasee (and a few final releases) of openSUSE has the same major problem with either the latest (release) versions of VirtualBox or VMware Player. 1) You can't run the installer from a LiveCD without booting to the Live CD desktop first. 2).After installing from the Live CD and booting into the into the Installed OS the spash screen apperars (I'll Esc to see what's going on under the hood) and the boot process appears nromal untill the point where one would be looking at A) KDM or B) GDM or c) a KDE/GNOME desktop. Instead of getting A-C you get a blank, black screen. Is this a (maddeningly old) bug or a feature? During the same period, simier versions of Fedora, Mandriva and Ubuntu have not had this issue. They "just work". What are they doing right? Curiously, Scott -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] iwl3945 issue on openSUSE 11.3 M3
by Andi Sugandi 09 Mar '10

09 Mar '10

Hi listmates, I'm Acer and KDE 4 user, and this machine has wireless adapter: 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) openSUSE 11.2 does the right job to automatically bring the Wlan0 start (the led is on) right after KDE is up, but different on openSUSE 11.3 M3 (and M2), the led is off and (of course) the wireless connection seems disable (eth0 still works though). To solve this issue, I should first: 'service network restart' , and then 'modprobe -r iwl3945 && modprobe iwl3945' . My enabled repositories: http://download.opensuse.org/factory/repo/oss/ http://download.opensuse.org/factory/repo/non-oss/ The used kernel version: 2.6.33-5-desktop Does anyone have this issue too? Should i file a bug? Best regards, -- Andi Sugandi (Bandung) openSUSE Ambassador http://en.opensuse.org/User:Andisugandi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

5 6

Solved per 7 March (Was Re: [opensuse-factory] preload-kmp-desktop issue in 'zypper dup' to oS 11.3 MX)
by Andi Sugandi 07 Mar '10

07 Mar '10

On 3/4/10, Andi Sugandi <andisugandi(a)gmail.com> wrote: > On 3/4/10, Ken Schneider - Factory <suse-list3(a)bout-tyme.net> wrote: > >> you need to delete the preload packages and then you should be good to >> go. > > I did it (sorry not to mentioned it on early post), and it failed to boot. > > I just find the issue that new kernel-desktop (2.6.33) will not boot > properly except get the package from kernel:HEAD repository*, not yet > fixed on Factory. Hopefully M3 will be having the good ones. > > *) http://lists.opensuse.org/opensuse-kernel/2010-02/msg00076.html It's fixed now by removing preload-kmp-desktop first, and then 'zypper dup' per 7 March. Thanks openSUSE-Team. Best regards, -- Andi Sugandi (Bandung) openSUSE Ambassador http://en.opensuse.org/User:Andisugandi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] Status: M3
by Stephan Kulow 06 Mar '10

06 Mar '10

Hi, The 2 blocker issues for M3 are fixed (thanks to Michael, Jeff and Richard) and so far it looks quite ok to release M3. I'm only doing my very first DVD installation with gcc 4.5 and I will need to do some more testing, but unless new stuff pops up I can't forsee atm we're back on track. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

6 11

[opensuse-factory] status: distribution
by Stephan Kulow 06 Mar '10

06 Mar '10

Hi, Milestone2 looks good and I'm just uploading it to the mirrors. After that's done, we'll switch to gcc 4.5 and after that the real fun starts - so I hope everyone who can, helps fixing packages here and there. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

19 30

[opensuse-factory] M3 Question about kernels
by Donn Washburn 06 Mar '10

06 Mar '10

Hey Group; For years I have always taken openSuSE basic kernel and compiled it with my CPU. So, a i586 is converted to a i686 and NV.run to work. That seems to often help speed things up and no crashes. Anyway, I simple copy /proc/.config and move it to kernel source .config (after gunzip) - I then run make menuconfig -> save it and then "make, make modules, make modules_install" After it is complete mv System.map and arch/x86/boot/bzImage and mkinitrd plus edit /boot/grub/menu.lst. Reboot and it has always worked correctly before. However, now days it boots up to the part where VGA is selected before any HDs are mounted and locks up/dies What is new to prevent VGA=0x346 to fail. It is openSuSE's kernel 2.6.33-5 with the only change is the CPU and a custom default name (so as not to ruin openSuSE's -5-default -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 3

[opensuse-factory] New Package for factory: sssd
by Ralf Haferkamp 05 Mar '10

05 Mar '10

Hi, I finally found some time to package sssd and am about to create the submit request to factory. sssd (hosted at http://fedorahosted.org/sssd/) stands for "System Security Services Daemon" and it's primary function is to provide access to identity and authentication (it comes with a PAM and NSS module) remote resources through a common framework that can provide caching and offline support to the system. I gave a short introduction to it already in May last year on this list (back then sssd was still a bit premature): http://lists.opensuse.org/opensuse-factory/2009-05/msg00019.html Many things I wrote in that mail are still true AFAIK. One difference is that today sssd comes with it's own providers for ldap and kerberos and doesn't necessarily need to use nss/pam_ldap for that any more. We have currently two feature requests in fate regarding sssd: https://features.opensuse.org/308900 and https://features.opensuse.org/308902 I won't be working on YaST support (Fate#308902), but if anyone feels like doing so, sssd comes with a simple Python API to manage it's own configuration which could be leveraged for that. My current plan is to use "network:ldap" as the devel project for sssd and I have split it into four packages: python-sssd-config: the configuration API sssd: The main daemon, NSS and PAM modules plus the provider plugins for ldap, kerberos and proxying sssd-ipa-provider: The provider plugin for FreeIPA, splitted into a separate package as we currently don't have much use for it. (BTW, is anybody interested in making FreeIPA (freeipa.org) work on openSUSE and OpenLDAP? Please get in contact with me) sssd-tools: Some command line tools to manage sssd local users (sssd offers to maintain local users and groups in it's on databases instead of using /etc/passwd,/etc/groups Comments, feedback and patches are very welcome. regards, Ralf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] New icedtea6-1.7/openjdk-b17
by Michal Vyskocil 05 Mar '10

05 Mar '10

Hi community, yesterday I've updated the java-1_6_0-openjdk to icedtea6-1.7/openjdk-b17. This contain also the alpha version of a new NPRuntime Java plugin for browsers using NPRuntime. That includes xulrunner 1.9.1 based browsers (Firefox 3.5, and probably Seamonkey 2) and Chromium. For xulrunner 1.9.2 based browsers (Firefox 3.6) it is only supported way. In a human speech - if you want to use Firefox 3.6 or Chromium browsers with openjdk plugin, please use openjdk packages from Java:openjdk6:Factory. Factory users can wait on next snapshot, or use this project too. Regards Michal Vyskocil

2 1

[opensuse-factory] lsattr and ls -l or l
by Donn Washburn 04 Mar '10

04 Mar '10

Hey Group Question! How come some of the files in /usr/include/QtCore are shown as blue and others as white. I know about /etc/DIR_COLOR setting the color by suffix. However, all of these are file or file.h. I thought maybe it was from lsattr but both are show the same. One is blue and the other is black in my example. This is just for information and is not viewed as a problem. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316

4 6

[opensuse-factory] how to test upstart
by Stephan Kulow 04 Mar '10

04 Mar '10

Hi, Factory has upstart now. Not as default, but you can test it in doing: download upstart.rpm from factory repo (zypper doesn't offer "just do it on install) rpm -e --nodeps sysvinit rpm -ivh upstart.rpm reboot I submitted the fix for the broken dependency yesterday, but it's too late to fix for M3. Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0

[opensuse-factory] preload-kmp-desktop issue in 'zypper dup' to oS 11.3 MX
by Andi Sugandi 04 Mar '10

04 Mar '10

Hi Listmates, I 'zypper dup' from openSUSE 11.2, and keep having problem like this: Problem: nothing provides ksym(desktop:mod_timer) = 45450063 needed by preload-kmp-desktop-1.1_2.6.32.0_rc5_git3_1-10.4.i586 Solution 1: Following actions will be done: keep obsolete preload-kmp-desktop-1.1_2.6.31.12_0.1-6.9.12.i586 keep obsolete kernel-desktop-2.6.31.12-0.1.1.i586 Solution 2: break preload-kmp-desktop by ignoring some of its dependencies It can still successfully upgrade all packages except those two packages. openSUSE 11.3 M2 failed (kernel panic) to boot tp my Acer Aspire 5620, but succeded when it was M1. So I tried to have M2/M3 from openSUSE 11.2 with 'zypper dup' but has this kernel upgrade problem. --- > cat /etc/SuSE-release openSUSE 11.3 Milestone 3 (i586) VERSION = 11.3 --- How to fix this? Thanks in advance. Best regards, -- Andi Sugandi (Bandung) openSUSE Ambassador http://en.opensuse.org/User:Andisugandi -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 2

[opensuse-factory] M3 and KDE crash
by Donn Washburn 04 Mar '10

04 Mar '10

Hey Group; KDE4 on M3 is crashing without any programs up. Changing to tty6 and watching the kde output has shown a strange character output one time. It was some sort of udf-8 error as I remember from the output consistent with most times - Included is some of the errors captured. -- 73 de Donn Washburn 307 Savoy Street Email:" n5xwb(a)comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5xwb(a)arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316

1 0

[opensuse-factory] opensuse-factory isos
by doiggl＠velocitynet.com.au 03 Mar '10

03 Mar '10

Hello, The isos look like their out of sync (You may know this already) one shows Build0449 and the other Build0461 Has the one building openSUSE-KDE-LiveCD.... stopped building the images ? >From http://download.opensuse.org/factory/iso/ - openSUSE-KDE-LiveCD-x86_64-Build0449-Media.iso 16-Feb-2010 11:47 691M - openSUSE-NET-x86_64-Build0461-Media.iso 24-Feb-2010 17:42 156M Glenn -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 5

[opensuse-factory] patches for PulseAudio?
by Werner LEMBERG 02 Mar '10

02 Mar '10

I wrote this on the PulseAudio list: On openSuSE, I use these packages, mostly from the factory repository: alsa-1.0.22-2.5.i586 pulseaudio-0.9.21-2.4.i586 skype-2.1.0.81-suse111.i586 phonon-4.3.80-4.2.i586 (everything else from KDE is 4.3.95) I experience a big delay (more than a second), especially problematic while using Skype. I've configured KDE to use `PulseAudio' as the output device for everything. And I got this answer: Please ask your distribution to include the patches from the "stable-queue" git branch in PA git. Most other distributions now regularly apply those patches. And so should yours. The Skype issue is fixed there. My question: Does this happen for OpenSuSE too? Werner -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 2

[opensuse-factory] Status: Distribution
by Stephan Kulow 01 Mar '10

01 Mar '10

Hi, The roadmap says we will release M3 this week. With 194 packages not building (many of them caused by more strict implementation of FORTIFY_SOURCE it seems) I'm not really sure we can make it. Then again I prefer releasing a buggy M3 that allows testing than not releasing any milestone and not having any testing. But I won't release anything that doesn't allow testing - so we'll see. And as usual I welcome any help in getting the build failures / bug count down. You can see the details here: https://build.opensuse.org/project/status?project=openSUSE:Factory (need to login) If someone fixed Mono, we're back to green most likely :) Greetings, Stephan -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

9 11

[opensuse-factory] /usr/bin/hostid?
by Ludwig Nussel 01 Mar '10

01 Mar '10

Hi, Does anyone know any users of /usr/bin/hostid? We have a custom one in the util-linux package but upstream coreutils contains a different implementation. Ours prints '0xnumber' while upstream only prints 'number'. Also ours allows to set the hostid and the man page refers to /etc/hostid. However, hostid doesn't actually read that file and there also doesn't seem to be an init script for it either. So I wonder whether we could safely switch to the coreutils version. cu Ludwig -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.de/ SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nuernberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

3 4

[opensuse-factory] /usr/sbin/freeramdisk?
by Ludwig Nussel 01 Mar '10

01 Mar '10

Hi, Has anyone ever seen any use of /usr/sbin/freeramdisk? AFAICS it's equivalent to "blockdev --flushbufs /dev/ram" so I guess we can just drop it. cu Ludwig -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.de/ SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nuernberg) -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

2 1

[opensuse-factory] LXDE: switch from pcmanfm-legacy (0.5.2) to pcmanfm2
by Andrea Florio 01 Mar '10

01 Mar '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Today i'm finally completing the move from pcmanfm-legacy to pcmanfm2 as announced time ago to mailing list [1] please notice that pcmanfm2 has been renamed to pcmanfm and it will CONFLICTS with pcmanfm-legacy. Is not more possible than, to have both installed but you can keep old pcmanfm if you want even if it's not suggested. please test new pcmanfm2 an report about any issue you find Best regards Andrea [1] http://lists.opensuse.org/opensuse-lxde/2010-02/msg00010.html - -- - ------------------------------------------ Andrea Florio QSI International School of Brindisi Sys Admin CISCO CCNA Certified openSUSE-Education Administrator openSUSE Official Member (anubisg1) Email: andrea(a)opensuse.org Packman Packaging Team Email: andrea(a)links2linux.de Web: http://packman.links2linux.org/ Cell: +39-328-7365667 - ------------------------------------------ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/ iEYEARECAAYFAkuLpjkACgkQyCZT87TFPui5awCeLaSGX9RRo9BzcmClj20L5A/9 wM4AoL1lMKDTDQr1U7FDkp1XaG6v/You =sCvg -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-factory+help(a)opensuse.org

1 0